Issue with Safari and using the back arrow with multiple tabs open

I open multiple tabs in Safari but when I'm in a tab browsing and I hit the back arrow, in the new version of Safari, it doesn't just go back to the previous page in the tab, it completely backs out of all the tabs. What am I doing wrong?
I have a PC running Win 7 and the lastest version of Safari.  I launch Safari which opens to my home page (CNN). I then go the News on my menu bar and select Open in Tabs - then tabs for 6 news sites open up. However if I go to one of the tabs and start navigating around the sight and I want to back up a page I click the back arrow like I have always done in previous versions of Safari but instead of backing up 1 page in the tab I'm in, it collapses all the tabs and I'm back with only the CNN tab still open. Its frustrating not being able to backup on page and I can figure out what's going on. I've use Safari for sometime now but only this version is giving me this problem. I tried resetting and reinstalling Safari but still get the same problem.  Any ideas? Its like I'm backing out of tabs instead of pages.
Jeff Law
< Edited By Host >

Thanks for your quick response.
1) I have the Block Pop UP windows option turned off
2) I switched Safari to 32 -bit mode and rebooted my iMac but I still can't get the CBS videos to run
The exact message I get in the Hulu or CBS box is:
The video you have requested is either unavailable or is being blocked by an ad blocker installed in your browser.
I have the same problem with the Safari, Firefox and Opera (all are the latest versions.
------Barry N.

Similar Messages

  • I play games that require I use the back arrow a lot and have been getting the mesage that says this server is rerouting in such a way that it will never complete. How do I fix this, have tried clearing cookies cache etc..

    Play zynga games and use the back arrow all the time, continuously using this doesnt seem to go well with firefox 4...firefox3.6 no problems. I get a none responsive page off and on and sometimes have to switch between firefox and chrome. The message is that the server is rerouting in such a way as it will never complete, suggestions have been to clear cookies etc which doesnt fix the problem.

    This can be caused by corrupted cookies or cookies that are blocked (check the permissions on the about:permissions page).
    *https://support.mozilla.org/kb/fix-login-issues-on-websites-require-passwords
    Clear the cache and the cookies from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
    *http://kb.mozillazine.org/Cookies
    *https://support.mozilla.org/kb/Deleting+cookies

  • After I search using Google in Firefox, and hit the back arrow button to return to the main homepage I use, the browser won't take me there. Instead, I'm left at the initial results page from my search.

    Assume I start at Google as my homepage. I search for Federal Reserve. Google then brings up a number of selections for Federal Reserve. I can scroll through to more search results on page 2, 3, 4, etc. Now suppose I want to use the back arrow button to go back to Google as my homepage. I’ve found what I was looking for. When I try to get back to Google, the furthest back I can go is to page 1 of the search results. The browser won’t take me back to the original starting page which was Google. Also, it doesn’t matter what the starting page or initial page was. The browser will only take me back to the initial page after the original homepage. By the way, I did not install any new software or applications prior to this problem occurring. My guess is that it may have something to do with the function keys at the top of the keyboard. But I can’t figure out what the problem is with the function keys. It’s only a guess.

    using Google toolbar for searches?? disable instant search (click the wrench to the right of the tool bar, untick enable instant, and hit save. worked for me
    :

  • When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)

    When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)
    I have attached the url of the unwanted site.

    Use this add-on [https://addons.mozilla.org/en-US/firefox/addon/custom-new-tab/ '''Custom new tab'''].

  • How Do I Launch Safari with Multiple Tabs Open to Specific Pages?

    I'd like a Windows shortcut that opens Safari with multiple tabs open to specific pages. With other browsers (Firefox, IE, Chrome, etc.), this is easily done by composing a command line that lists all desired URLs. However, Safari doesn't seem to use the same command line syntax as other browsers. Furthermore, I can't find Safari's command line syntax documented anywhere. From the comments I've seen while researching this question, I suspect this is a neglected area of Safari development, and that Safari simply can't be configured to open multiple pages. However, I'd like to make sure. Can it?
    -TC

    It strikes me that it should be possible to do that (or something similar) by building a safari extension, TC. Both Sessions and SafariRestore are able to launch multiple tabs from a previous session, so it seems like you should be able to create an extension that launches multiple tabs open to specific sites when Safari is launched.

  • With multiple tabs open, crashing with no warning to close tabs and no crash report. Just bye-bye.

    I have the option to warn me before closing multiple tabs selected. I left my desk for an hour with multiple windows open. When I returned, all but 1 window disappeared. I was typing on Facebook with multiple tabs open and instantly all tabs and windows disappeared without warning. No crash report either. I search for the keyboard shortcut to close a window (Alt+Spacebar+C). I tested with multiple tabs open, no warning - just instantly closed. I do not think I hit these keys by accident and I would like an option for a warning with one tab open or multiple tabs.

    Ok I solved the problem if anyone is looking at this.
    Add on "Hide Caption Title bar Plus" was the offender
    Option - define option for close button. Was on recommended not default.
    Choose default, problem eliminated!
    Andy

  • With multiple tabs open, I use to click File, close tab---now close tab is missing and I exit out of Firefox completely. How do I get that choice back "close tab" in the "File" drop down? Thanks. George C.

    The drop down "FILE" in the tool bar use to have a choice to "CLOSE TAB". This is now missing so when I have multiple tabs open and I want to close the most recent, I cannot. I then get warned that I will be closing multiple numbers of tabs, but there is no other choice.
    How do I get the "CLOSE TAB" back in the drop down "FILE" in the tool bar

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * [[Troubleshooting extensions and themes]]

  • Since downloading Safari 6.0 when browsing I cannot use the back arrow

    Since downloading Safari 6.0 sometimes when reading a website I cannot go back as the back arrow doesn't work.

    Hi,
    I found this Terminal command here on the discussion board posted bu Sinzu.
    defaults write com.apple.Safari com.apple.Safari.ContentPageGroupIdentifier.WebKit2BackspaceKeyNavigationEnable d -bool YES
    Dimaxum
    Sorry, everyting is BOLD tekst.

  • Why when I use the back arrow the window disappears?

    I don't like Safari for other reasons. Now all the sudden I am having trouble with my windows. Its like I have lost the ability to navagate. Now when I press the back arrow the window disapepars. I only use Safari because I have a MAC. Firefox is much better and I use it more.  I hope that I am just confused.  It Safari becomes harder I don't know what I will do.

    The back arrow by itself shouldn't do anything in Safari, unless a text-entry field is active.
    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • When i use the back arrow I have to click twice, what is wrong

    I dont like the new toolbar any way to go back to the old one.
    When I click the back arrow I have to click it twice , what is wrong

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    * [[Troubleshooting extensions and themes]]

  • How to return to the original search page after clicking on numerous links w/o using the back arrow

    I want to return to the original search page without having to click the back arrow repeatedly to get back from where I have been searching

    The Back/Forward button drop-down arrow marker was removed from Firefox.
    To get the tab history drop-down list, you can:
    *right-click the Back/Forward button
    *HOLD down the left-click mouse button on the Back/Forward button until the list appears (about 1 second)
    *Add back the drop-down marker by installing this Add-on: https://addons.mozilla.org/en-US/firefox/addon/backforward-dropmarker/
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You need to update some plug-ins:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • If FF is set to "Never Remember History" and I try to close it with multiple tabs open, it doesn't warn me first. If it remembers history, it warns me about closing multiple tabs. I want that warning AND Don't Remember History back again!

    At work I set my PC to not remember history for privacy reasons.
    I always have many tabs open, and the warning about closing multiple tabs was a good thing - but now it only works if it remembers history!
    I have the "Warn me when closing...." box checked AND all of the lines in about:config regarding these warnings are set to true. I have tried turning it off and back on, restarted the PC.
    I discovered this yesterday with FF 3.something, tried updating to FF4.

    The "Use custom settings for history" selection allows to see the current history and cookie settings, but selecting this doesn't make any changes to history and cookie settings.
    Firefox shows "Use custom settings for history" as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.
    If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History".
    "Never Remember History" means that Private Browsing is active and "Always use private browsing mode" gets a checkmark.
    You need to remove the checkmark on "Always use private browsing mode" to leave Private Browsing mode or chose the "Remember History" setting.
    *https://support.mozilla.org/kb/Private+Browsing

  • With multiple tabs open, and selecting a new (blank) tab, RoboForm open new web page in far left tab, not the new (blank) one. How to correct this?

    Problem: Firefox Browser Tabs when using RoboForm
    When using Tabs in the Firefox browser (with multiple Tabs already open), I (1) click to open a new (blank) tab and then, (2) click on RoboForm to go to a new website. Instead of the new website opening in the newly opened (blank) tab it opens in the first (far left) tab. This only began happening when I installed Firefox 5.0 and RoboForm Desktop v7.3.2 at the same time.
    My system: HP Pavilion Media center, Windows Vista Ultimate 64-bit, 8GB RAM, Firefox v5.0, Roboform Desktop v7.3.2

    Thanks a lot. The culprit turned out to be Webmail Notifier. Unfortunately, there seems to be some problems on their end that the developer has not yet responded to, but something about the extension is screwing up tab functionality.
    Thanks!

  • Branching and Using the 'Back' button

    I have created a branching program that is essentially a
    "choose-your-own-adventure." There is no quiz, b/c there is no
    right or wrong.
    However, when you begin you have three choices. The user
    selects one of those choices and goes to Slide A, Slide B or Slide
    C depending on their choice. There, they have more choices to make.
    From Slide A, their choices would take them to Slide D, Slide E or
    Slide F. If they originally chose Slide B, the next set of choices
    would also be Slide D, as well as Slide G or Slide H.
    (And so on and so forth)
    It has been recommended to me that I create a way for users
    to simply hit the playbar's "back" button if a user is on Slide D,
    and wants to go back to Slide A. However, under my current set-up,
    I have two problems: The first: if they simply hit the back button
    on the slidebar from Slide D, they will go to Slide C--a
    acompletely wrong choice. Secondly, if I put a "Jump to" button on
    the page, I actually have to put 2 on (one that will bring them to
    Slide A and another that will bring them to Slide B) since you can
    get to Slide D from both A and B.
    This is a simplified version of my branching, and creating a
    button for each page that a slide could go back to isn't feasible
    and would probably be more confusing to the user than anything.
    Please tell me if this doesn't make sense, or if there is a
    way that I can do this.
    To see the project and see what I'm talking about, you can go
    Here,
    and then choose the "Is My TV Ready?" option.
    Thank you,
    Rob

    Hi Rob
    Had a look at your program and think it is a great use of
    Captivate.
    Regarding the "back" functionality, I would recommend to
    custom build a button on each slide where you wish to go back. The
    reason is that the back button on the play bar will always go back
    1 slide in the actual slide sequence and does not take branching
    into account i.e. it is a pure linear back 1 button. To make life
    easier, I would suggest giving each of your important slides a
    unique label, which would then make it a lot easier to:
    Specify where the individual "back" buttons would jump to
    View the actual branching in teh Branching view of Captivate.
    Good luck mate
    Andrew

  • In Safari I am having issues with spam tabs opening up.

    When I am in Safari and I click any links, new tabs open up constantly with MacKeeper or Clean Mac, etc. How can I stop this from happening? I am already blocking pop-ups in my Safari Preferences.
    Also, I have noticed that Safari won't save my homepage preference, and instead resets to one of these super annoying non-search search engines as my homepage.
    Can anyone help?

    Check the links below for options to remove the Adware.
    The Easy, safe, effective method:
    http://www.adwaremedic.com/index.php
    If you are comfortable doing manual file removals use the somewhat more difficult method:
    http://support.apple.com/en-us/HT203987
    Also read the articles below to be more prepared for the next time there is an issue on your computer.
    https://discussions.apple.com/docs/DOC-7471
    https://discussions.apple.com/docs/DOC-8071

Maybe you are looking for

  • Nokia 5800 - poor wi-fi performance?

    I own both 5800 and E51. Both wi-fi chips are set to Tx 100 mW. I notice that E51 detects more networks, connect to more networks than 5800. I compared the signal strength between the two phones. E51's signal is always 20-30% higher than 5800's. I mu

  • Shadowing in the classroom

    I am attempting to setup a classroom object in SGD 4.2. When I specify the "winclass.exp" for the login script I get the following error: ErrEvalFileFailed Script 1347 exited with code 44 and signal 0 When I look at the execpe error log, it gives me

  • Execution time of SQL

    Hi, I have a sql statement that is having poor performance. I wanted to check how much time it's taking on each execution in last 10 days. Regards

  • Why are my video saying 'unsupported mpeg1 muxed' in Aperture 3?

    I have tried to use Streamclip but that didn't work

  • Where can I download WLS 8.1.6?

    Hi, Our company is an Oracle partner and we're starting a project where we'll develop software for a client using WLS 8.1.6. For this we'd need to install that particular version of WLS in our development environment. I'm having trouble locating the