Issue with Sales Views in MM01

Hi gurus,
We need to create a material with only views for Basic Data 1&2, and Sales Org. Data 1, Sales Org. Data 2 and Sales General Plant data.
The sales organization is created but when trying to assign the material (with existing Basic Data 1&2) to the Sales Organization the system is giving error "sales org. and distrib. channel invalid sales area".
Any idea what additional settings are necessary to assign the material to the sales org. ?
Thanks!
VL

Sales organisation itself is not enough, you have to define distribution channel also:
SPRO > Enterprise Structure > Definition > Sales and Distribution > Define, copy, delete, check distribution channel
Distribution channel has to be assigned to sales organisation:
SPRO > Enterprise Structure > Assignment > Sales and Distribution > Assign distribution channel to sales organization
Division should also be defined and assigned:
SPRO > Enterprise Structure > Assignment > Sales and Distribution > Assign division to sales organization
It's starnge that you want to create material master and still your config has such serious deficiencies...

Similar Messages

Issue with sales order stock that is referencing a non-existing sales order

We have an issue with sale order stock.
Due to user error we have ended up with a negative quant of sales order stock in a bin. Further the error was due to mis-keying of sales order number. Hence this negative quant is referencing a sales order that does not exist.
We need to get rid of this quant.
I thought of cycling this quant off as a solution. And hence replicated the scenario in the test system. I was able to create a TO to cycle it off but cannot clear the differences from 999 . The error I get while trying to do this is "SD document not in database or has been archived" . This error is true since the sales order actually does not exist. So cycling it off did not work.
Can anyone suggest how we can get rid of this negative quant of sales order stock ?
Thanks

Hi,
You said that your user mistyped the SO number and it resulted in a -quant. In which transaction was it possible? If I give a non existing no. SAP doesn't allow me to book.
If I were you I would check both in WM & IM what the user had done...step-by-step...
Negative quant comes to existance in interim storage type if we book e.g. a GI. It should have started in IM...how was your user be able to do that??? If it was possible cannot you reverse the IM booking?
(...if all else fails...cannot you create a SO document with external number assignment with the same number?...)
BR
Csaba
Edited by: Csaba Szommer on Jun 24, 2008 8:31 PM

Issue With Sales Document Type in BW.

Dear Experts,
I am facing an Issue with Sales Document Type(Object name is 0DOC_TYPE).
when i am loading data from R/3 to BW It is converting Sales Document type as follow
Sales Document Type in R/3                         Sales Document Type in BW
OR                                                                        TA
CR                                                                        G2
DR                                                                        L2
I check with an ABAPer and he told that there is conversion exit for this Object so that's why it is converting when sending to BW. But the user wants to see in Report same as it is in R/3 like OR, CR DR ... etc.
I have done some investigation and found that the conversion exit (CONVERSION_EXIT_AUART_INPUT and CONVERSION_EXIT_AUART_OUTPUT) are converting the values based in the table TAUUM
The staructure of TAUUM is
MANDT(Client) SPRAS(Language) AUART(Sales document type (not converted)   AUART_SPR(Language key for sales document type)
and values are
100 E TA OR
100 E G2 CR
etc....
The same Conversion exits(CONVERSION_EXIT_AUART_INPUT and CONVERSION_EXIT_AUART_OUTPUT) and table TAUUM are available in BW as well. So i thought I can Use InfoObject 0DOC_TYPE by changing it's conversion Routine as AUART(which runs based on the above mentioned conversion exits).
but the the problem is table TAUUM(Pool Table) does't have any data in BW.
So can anyone tell me is there any option to load data into table TAUUM from R/3 or any other option to solve this issue.
Your ideas will really help's me.
Thanks in advance,
Dara.

Hi Venkat,
Thanks a lot for your immediate response.
The InfoObject 0DOC_TYPE was without conversion exit by default. but when data coming from R/3 it is converting and sending to BW So that's why i am planning to use conversion exit "AUART" in the info Object.
I checked data in R/3 using RSA3 it is showing sales document type as "OR" and for the same transaction data when i checked in PSA it is showing as "TA".
Could you please let me know if there any other options.
Thanks in advance,
Dara.

Issue with Tree view

Hello experts,
I am facing a very strange issue with tree view.
I have created a custom component with a tree view. All data are coming in the tree view. But the strange thing is that the data is not getting displayed on the screen.
I am sure about the data because, when I am selecting a line from the tree, the data from that line is coming to the main screen.
Please help!!
Regards
Debolina

Hi experts...
Any pointers to this issue???
Please help!
Regards,
Debolina

Issue with Sales office values in BI

Hi Team,
We have a issue with the sales office values in a BI report.
The report displays 7 sales office values for the division 01. Where as in ECC, we have only 6 sales office values exists for the same division 01.
These sales office 7 has been have been loaded on april n may months.
The master data has all the sales office values 01- 10.
Those sales office values are coming from the Infocubes, 'Billing Document Condition' & 'Open Orders'.
I have the checked the Multiprovider, Infocubes and the InfoObject and values exists.
How to proceed further and correct these values?
Appreciate your expert guidance...
Thanks
Regards
Santhosh Kumar N

Hi Krishna,
Thanks for the reply. The Sales office field is directly mapped in the transformation and does not have any routine. Its the Key field.
The Billing Document Condition infocube is being feed by the DSO '2LIS_13_VDKON - Billing Document Condn' and datasource is '2LIS_13_VDKON'.
The Open Orders infocube is being feed by the DSO Document Order item / Delivery; below which we have another 3 DSO.
1st DSO has the Datasource '2LIS_13_VDITM'
2nd DSO has the Datasource '2LIS_11_VAITM'
3rd DSO has the Datasource '2LIS_11_V_SSL'
The Sales Office 7 has txn records for the month of April & May.
The report built on top of a Multiprovider and the for the months June and July, we have txn records fine for the sales office 01 - 06.
Please help me, if i am missing anything here and make me to understand better.

Status issues with sales process

Hi Friends,
I have an issue with thrid party sales order processing
Step#1
My client runs the sales order for
Material Qty
p-100 10
p-101 10
p-102 10
step-2
Purchase requisition created and from vendor delivery happened
Step-3
My user created billing with reference of sales order for below material
Material quantity
p-100 20
p-101 10
p-102 20
step-4
user found mistake and he cancelled the invoice and created new billing document
for
material quantity
p-100 10
p-102 10
again he found mistake and cancelled this billing document and create one more billing document with reference of sales order
material quantity
p-100 10
p-101 10
p-102 10
now the issue is for p-100 and p-101 it showing being process and p-101 it showing status as completed
please suggest m

Just checking to see if anyone has re-produced any of these issues...
Thanks!
Jason Walters

SCM Issues with Sales Orders Created through CRM

Hi All,
I'm trying to ascertain any issues with ERP processing that will not update orders created through CRM, i see there was a OSS Note some time back informing that the backorder reschedule program would not update orders created in the CRM system. Is this still the case and are there any other process that we should be marking as an issue?
Thanks

Hi Sirisha,
The solution depends on the exact issue you are facing.
The CRM Sales Order is created OK, but you only see the error when you open the Sales Order?
If this is the case, then you can follow the steps below:
1. Find the Message ID and Message No for the error message
2. Use Program - CRM_MESSAGES_DELETE to delete error messages from the error producing Sales Orders.
Let me know if this is not the issue you are facing.
Regards,
Nelson

Issue with Adobe Viewer.

I am a Coldfusion developer. I have an application that takes some coldfusion variables and populates a pdf form that was created in LiveCycle. In the past this worked fine. Today someone told me of an issue they are having. Now when the view this pdf in a browser the fields are not populated. This is a major drawback from the way things use to work. Is this a bug or did you intend to do this?

Yes, I have tested on Chrome, Firefox, Safari, Opera and IE. It does not work in Firefox 19 or in Chrome 25. In Firefox I only get the hard coded text of the form. In Chrome I get the placeholder text in the form fields. Firefox shows a yellow message at the top "This PDF document might not be displayed correclty." and their is a button labeled Open With Different Viewer. Some of my users are not very tech savy and may miss that option. I am populating the form using the cfpdfform tag with an action of populate on a pdf form created in live cycle. I use the cfpdfformparam tag to put the values in the fields.

Performance Issue with PAY_BALANCE_VALUES_V View in Oracle R12

Dear all ,
We have recently upgraded from 11i(11.5.10.2) to R12(12.1.3). We are facing one Issue with slow performance of the queries where PAY_BALANCE_VALUES_V is used. We have so many reports & logic in Payroll which uses this View.
In 11i this works fine, however in R12 it takes very long time. There are no configuration changes we have done from 11i to R12.
Is there any way to optimize the performance or alternate way to retrieve the Balances Data in Payroll ?
Any heads up would be highly Appreciated.
Thanks,
Razi

Hi Razi,
The balance related performance issue is written in the following note.
Note:1494344.1 UK Payslip Generation - Self Service Program Takes Much Time To Complete (Performance Issue)
This issue was fixed in HR_PF.B RUP6 or patch:14376786. Did you apply this patch? If not, I suggest you apply it.
Also, HR_PF.B RUP6 has some balance related performance issues.
If you already have applied HR_PF.B RUP6, I suggest you log a SR with SQL trace.
Thanks,
Hideki

Issue with Smart View when trying to connect to Planning/Essbase

Hi All,
I'm facing this issue with Hyperion 11.1.1.3 & 11.1.2. In Excel, I've created a connection in SmartView by giving the URL as http://ServerName:8300/HyperionPlanning/SmartView. After that i'm able to see "Servers" and when i started expanding that, it displayed the server name. When i clicked on the server name, it should display the Planning Application name right ? instead of that just a Cuble symbol is displaying. Do i need to make any settings for proper display of the Planning Application names ? This is perfectly working fine with HFM. I'm able to see HFM application names. Pls. advice

I was trying for shared conenction this morning and it was not working. Now all of sudden it started working. Even i've checked now, the private connection is also working fine with the URL http://planningserver:8300/HyperionPlanning/SmartView

Issue with Smart View for Planning Connection

Hi All,
I'm facing this issue with Hyperion 11.1.1.3 & 11.1.2. I've created a connection in SmartView by giving the URL as http://ServerName:8300/HyperionPlanning/SmartView. After that i'm able to see "Servers" and when i started expanding that, it displayed the server name. When i clicked on the server name, it should display the Planning Application name right ? instead of that just a Cuble symbol is displaying. Do i need to make any settings for proper display of the Planning Application names ? This is perfectly working fine with HFM. I'm able to see HFM application names

Well, the thing I always forget and have pulled much hair out over is to add the essbase server access to the planning group.
Check on that, and I will loosen the rocks in my head to see what else I can suggest.
Robb

Planning Data from formatting issue with Smart view in 11.1.2

Hi,
We are facing one strange issue in Smart view.
We have created a dataform in Planning as follows:
Columns:
FY10 FY10 FY10
Budget Budget Budget
Jan Feb Mar
But when we open this in Smart view, we are getting the columns as follows:
FY10
Budget
Jan Feb Mar
i.e. year and scenario are spreading across months instead coming at each column level.
We are using Hyperion Planning 11.1.2, Smart View 11.1.2 and Office 2003.
Please help us.
Thanks,
Naveen Suram

Are you saying you want the dimension members FY10 and Budget to be repeated in each column?
I think that can be done for Ad-Hoc Analysis mode, but not where you have opened up a Planning form.
Cheers

Issue with smart view add-in in MS word 2003

Hi,
I have smart view 9314 and office 2003 installed on my machine. I can see hyperion tab in excel and it works fine but i can't see hyperion tab in word or powerpoint. Its not in disabled items for word. I tried to add HsTBar.xla in word using Templates and Add-Ins option but it throws error: Invalid add-in. Any info to resolve the issue would be highly appreciated.
Thanks.

Office 365 Web Apps are not supported and cannot be supported as there is no platform for add-in's in that environment. http://www.microsoft.com/en-us/download/details.aspx?id=13602
Most Office 365 uses cases and users end up with Office installed on the desktop and at that point we are talking about normal Office Support. Right now it is up to the Office 365 administrator to determine the version of Office to be used by their 365 users. http://onlinehelp.microsoft.com/en-us/office365-enterprises/ff637585.aspx
Short answer is that Smart View does not support Office 365 Web Apps and there are no plans to support the Web Apps.

Issue with Smart View Help Contents using v11.1.2.0.01

Hi there,
I just installed v11.1.2.0.01 (Build 003) of the Smart View add-in on a MS Windows XP SP2 PC with MS Office 2003 SP3.
Unfortunately, the Help Contents in MS Excel does not seem to work as whenever I select Smart View > Help > Contents, nothing gets displayed. Selecting Smart View > Help > Technical Support and Smart View > Help > EPM Documentation takes me to various links on the www.oracle.com site.
I uninstalled then re-installed this specific version a few times but to no avail. I even checked the contents of each subdirectory where Smart View has been installed but could not find any Help files whatsoever.
1. Has anyone ever encountered this issue?
2. If yes, what do I need to do to resolve this issue and get the Smart View Help to be displayed?
Thanks in advance,
JBM

Well, reading the documentation about knowing where to find the documentation would have actually helped. At the bottom of page 10 of the Smart View ReadMe document, the following is mentioned under the "Documentation Updates" section:
"For Smart View online help to be available, the Shared Connections URL on the Advanced page of the Options dialog box must contain an EPM Workspace URL."
This question is now answered.
JBM

Issue with Inline View Criteria

Hi,
I have a VO created on two tables that are joined by a 1:1 association(say Opportunity and Revenue). The query is specified in Expert mode because I need some aggregations performed using analytic functions. Data security predicates are applied on top of this query using a dummy View Criteria. My requirement now is that I need to filter these results using another VC. The issue is that both the tables have attributes with the same name(say Cust ID) and I need to filter based on this using an inline View Criteria. I have done the same declaratively. However, I get an error on hitting the page saying the columns have been ambiguously defined.
On digging through the log, I discovered the test Query fails to prefix the alias before the attribute. So what I get is something similar to this
select (o.id, r.amt, sum(), count(), avg(), o.custId) from opty o, revn r where (o.id in DATA SECURITY PREDICATE) and (custId = :bindCustId)
Is there a way to ensure that the custId can be changed to o.custId???
Note - The View Criteria was created on an attribute from opty table that was exposed i.e in this case, o.custId. Although the query builder shows it correctly while creating the VC declaratively, the issue persists as seen from the logs.
Thanks,
Manoj

Hi experts...
Any pointers to this issue???
Please help!
Regards,
Debolina

Issue with Sales Views in MM01

Similar Messages

Maybe you are looking for