Issue with SAP_PD Service in HCM Forms

Hi Experts,
I am facing this issue when trying to create/update a Position using HCM Forms.
We have the HCM_ASR_CL_2 Business Function Activated
We are on EHP4.
I am trying to create/update a position using forms - SAP_PD Service and facing the below mentioned issue -
When I am trying to add the Object Type S in the LEAD_OBJECT_ID, I get the error - Object type S not supported.
As a workaround that I got from a help.sap - 3.In the navigation pane, go toValidity Period.Enter Start Object Type as S = Job, enter Application Type as PD. - Even this workaround doesnt work!
Am I missing some config here?
Also, once we activate the Business Function - do we get the node for SAP_PD in IMG just as we have for SAP_PA and SAP_PT service?
Please help!!!
Thanks

Any reponses?

Similar Messages

I am having trouble connecting to my network all of a sudden. It is not an issue with the service/router. I keep getting kicked off and getting a ! in my airport... anyone know what's up with this?

I am having trouble connecting to my network all of a sudden. I am able to connect to other networks but not my own. It is not an issue with the service/router because other devices connect fine. I keep getting kicked off and getting a ! in my airport. Last time it happended I called apple and the suggested I wipe my HD and reinstall everything. I did and it did not work. One day I turned my laptop on and it connected no problem. Now it has kicked me off again. I tried resetting my IP address but that does not work either! Has anyone had this problem?

Try this:
Apple menu / System Preferences / Network.
Click Location: and select Edit Locations..
Click + (plus sign), and enter a name for the new location - anything will do.
Apply this.

Anyone else having issues with location services since the 7.1 update? Ever since I updated i've been seeing the location services on my status bar at all times.

Anyone else having issues with location services since the 7.1 update? Ever since I updated i’ve been seeing the location services icon on my status bar at all times. I noticed that google was the app that was using it a lot, but after I turned the feature off for google my phone started using the “traffic”, “frequent locations” and “cell network search”. When I turn the feature off for all of those things it’s no longer a problem. So just wondering if anyone else is having this issue or if anyone has a solution?

The "solution" is probably to increase your knowledge. You've done good things. Perhaps this article will educate you a bit more about location services.
Basically, they can be very useful, but can cause a lot of iPhone use. A major example is "Remind me to ... when I leave home."
http://support.apple.com/kb/HT5594

Issue with Weblogic services in Linux OBIEE 11G

Hello All,
I have a OBI 11G set up on a linux OS.I am facing a issue with weblogic service.
Whenever I am trying to start the Admin server from command line using its .sh , it is starting successfully.
But whenever I am closing that Linux session or coming out of the Admin server log , this service is getting stopped on its own.
OBI is working perfectly when that Linux session and Admin server log is intact, but as soon as i close either of them Admin server shut itself down.
Please any help on this will be appreciated.
Thanks,
Bhavnesh

Hi Bhavnesh.
Try this way and let me know the outcome.
nohup ./startWeblogic.sh -Dweblogic.management.username=Username -Dweblogic.management.password=password & tail -f nohup.out
Mark if helps,
Thanks,

I am having issues with being kicked off the internet intermittently. ATT says its not an issue with their service. Does anyone have an idea?

I am having issues with being kicked off the internet intermittently. ATT states its not an issue with their service. Any ideas?

Yes it is NOT your internet service. It is Apples OSX. It seems to be happening to older computers trying to run the newer OSX ( Mavericks and newer). I have a 2009 iMac I bought with Leopard installed, I upgraded to Snow leopard 10.6.8 and my computer was running flawlessly. I upgraded to Mountain Lion and I noticed my computer running slower... kind of annoying having to wait longer for everything (start up, browsers opening up, apps opening up, mail opening up and so on) Mavericks came out for free and I was excited to get out of this issue. Well, everything went from bad to terrible! Fast user switching had a glitch with desktop picture resetting to the wave, mail rules didn't work properly and I kept getting kicked off the internet (Absolutely NOTHING wrong with my internet). No one could figure out what was going on or how to fix it, even senior Apple tech's! After 3-4 months of searching, troubleshooting and waiting for a fix, I looked at my Mac Pro running Tiger 10.4.11 with no issues what so ever... that is when I made an executive decision. GO BACK TO SNOW LEOPARD! Since May 2014 I have been running 10.6.8 on my 2009 iMac and it has been smoking fast with NO issues what so ever, especially since I maxed out my memory for Mavericks. So to sum it up: some people might get lucky with old machines running new operating systems, but for the most part, it seems older processors can't keep up with the new sophisticated operating systems. Mavericks... Yosemite... FREE UPGRADE! But you will pay the price

Issues with ODATA service creation

Hi Gurus,
I am facing some issues with ODATA service creation. I have an analytic view which I want to consume via SAP UI5.
As per guides and blogs, I need to create 3 files, namely .xsaccess, .xsapp and .xsodata. I created these three files but at the same time .xsodata and .xsaccess got created at one more place. That place is my package which I checked out while creating the repository. Now when I try to activate my .xsaccess or .xsapp file, I get an error message - "The file name .xsaccess or .xsapp already exists and only 1 file is allowed per package"
for more info please revert.
Kindly help.
Best regards,
Chandan

Chandan Sinha wrote:
Can we add multiple analytic views in one ODATA service?
Certainly. You just have multiple entities then. You can even create associations between them. Here is an example that uses a combination of CDS Views, Attribute Views, and Analytic Views:
service namespace "Wile.services" {
"Wile.data.models::AN_EPISODES" as "Episodes"
keys ("EPISODE_ID")
navigates ("ToACMEItems" as "ACMEItems",
            "ToCoyoteNames" as "CoyoteNames",
            "ToRoadRunnerNames" as "RoadRunnerNames",
            "ToDirectors" as "Directors",
            "ToWriters" as "Writers");
"Wile.data.models::AT_ACME_ITEMS" as "ACMEItems"
keys ("EPISODE_ID","ITEM_ID");
"Wile.data.models::AT_ACME_CATALOG" as "ACMECatalog"
keys ("ITEM_ID")
create using "Wile.services:ACMECatalogExits.xsjslib::itemsCreate"
update using "Wile.services:ACMECatalogExits.xsjslib::itemsUpdate"
delete using "Wile.services:ACMECatalogExits.xsjslib::itemsDelete";
"Wile.data::WileECoyote.Episode.CoyoteNamesView" as "CoyoteNames"
with ("EPISODE_ID","NAME_ID","NAME")
keys ("EPISODE_ID","NAME_ID");
"Wile.data::WileECoyote.Episode.RoadRunnerNamesView" as "RoadRunnerNames"
with ("EPISODE_ID","NAME_ID","NAME")
keys ("EPISODE_ID","NAME_ID");
"Wile.data::WileECoyote.Episode.DirectorsView" as "Directors"
with ("EPISODE_ID","NAME_ID","NAME","URL")
keys ("EPISODE_ID","NAME_ID");
"Wile.data::WileECoyote.Episode.WritersView" as "Writers"
with ("EPISODE_ID","NAME_ID","NAME","URL")
keys ("EPISODE_ID","NAME_ID");
association "ToACMEItems" principal "Episodes"("EPISODE_ID")
   multiplicity "1"
   dependent "ACMEItems"("EPISODE_ID") multiplicity "*";
association "ToCoyoteNames" principal "Episodes"("EPISODE_ID")
   multiplicity "1"
   dependent "CoyoteNames"("EPISODE_ID") multiplicity "*";
association "ToRoadRunnerNames" principal "Episodes"("EPISODE_ID")
   multiplicity "1"
   dependent "RoadRunnerNames"("EPISODE_ID") multiplicity "*";
association "ToDirectors" principal "Episodes"("EPISODE_ID")
   multiplicity "1"
   dependent "Directors"("EPISODE_ID") multiplicity "*";
association "ToWriters" principal "Episodes"("EPISODE_ID")
   multiplicity "1"
   dependent "Writers"("EPISODE_ID") multiplicity "*";

"Test Error" - "raise the issue with your service ...

Help!
I have had performance problems on my broadband for quite a while but not been able to progress. The usual number based test from BT says we should get between 4 and 7 mbps. In reality we struggle to get 2 mbps, frequently lanquishing at 1.5 mbps.
I have been onto http://speedtester.bt.com/ to get analysis on the line (previously having had problems with our profile) but whenever I try to run a test (over several weeks) I now always get the reply:
The Performance Tester is currently unable to run a speed test for your broadband connection. Please try again shortly, however if this problem persists, raise the issue with your service provider.
Following up on this with the Indian call centre was an exercise in futility, they just couldn't understand what I was talking about and just wanted to follow the usual script for speed problems. The last time I tried they said they'd found an error at the exchange which they would fix shortly. The result of the "fix" was that our phone and broadband disappeared for 4 days and resolving this came with the usual threat of charging us £99 is the problem wasn't BTs fault. The fault was fixed without any explanation but subsequently I've been reluctant to follow up the problem through this route.
I don't know how to go about getting someone to fix the problem without being able to run the speed tests that BT will accept.
I would greatly appreciate some assistance from this usually very helpful group.
Thanks,
Andrew
Solved!
Go to Solution.

John,
Thank you for answering.
The details from my ASDL statistics are below. I cannot provide a BT Speedtester result - this is one of the problems I was raising. I have done a quiet line test and there is no noise. I don't have an internal master socket; I have an external grey box from which a number of wires run to various sockets.
Thanks,
Andrew
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
1 days, 16:42:25
Downstream:
4.063 Mbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
9.6 dB / 20.0 dB
Line attenuation (Down/Up):
44.0 dB / 25.0 dB
Output power (Down/Up):
20.1 dBm / 12.4 dBm
FEC Events (Down/Up):
4667988 / 202
CRC Events (Down/Up):
4713 / 192
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
86618 / 162
Error Seconds (Local/Remote):
33661 / 5662

Doubts with generic service in "HCM processes and forms"

Hello friends:
    Im having troubles trying to figure out how to use generic services. I implemented a badi with generic services and this have the following methods:
IF_HRASR00GEN_SERVICE~GET_SPECIAL_FIELDS
IF_HRASR00GEN_SERVICE~GET_FIELD_INFO
IF_HRASR00GEN_SERVICE~GET_OPERATIONS
IF_HRASR00GEN_SERVICE~INITIALIZE
IF_HRASR00GEN_SERVICE~DO_OPERATIONS
IF_HRASR00GEN_SERVICE~GET_HELP_VALUES
   I could initialize values of my form using only INITIALIZE method, and I could perform some validation using and then DO_OPERATIONS.
   I cant understand what is the usage of methods like GET_FIELD_INFO and GET_OPERATIONS?? according to the badis help, get_field_info must be implemented, but i didnt do so and it worked anyway?
I will be grateful with all your help,
Best regards,

GET_FIELD_INFO is for adding fields. Suppose you are using the generic service for IT0008 data. The IT0008 fields
which need to be used on the adobe form has to be added in this method. You need to add field name and data element
to the field_infos table. GET_OPERATIONS is used to define operations associated with the fields. Suppose you have a
scenario when user selects personnel area all personnel subareas associated with the selected value should come.
Then you need to group together personnel area and sub area together into an operation. Also even if a field is not aasociated
with any operation, to add a field to form scenario you need group them into operations in GET_OPERATIONS.
Check the class CL_IM_HRRCF_REQUI_REQUEST to determine how this can be used.
Thanks,
Aravind

Issue with Web Service Security

Dear Forum Members and Readers,
I am a beginner to Web Services, and facing an issue with WS-Security.
My issue seemingly is quite specific to my projects though, It will be great if you can provide me your views.
Context Description:
I am developing a Java Web Service application that is deployed on JBoss Application Server.
This application will communicate with two other applications those are not deployed in same JBoss Application Server.
These 2 applications are third party applications, one is C++ based web services and other is Java based web services.
My application gives a call to Third Party Application1 and receives the response back form it. It then passes this received response to Third Party Application 2.
Issue Description:
I now need to enable https paradigm among these 3 applications. (I need to implement web service security model here)
I started with looking in to JBoss specific WS-Security but found it not suitable in my case, as it requires to configure both the client and server. I have the control over my application but not on other 2 third party applications.
To this extent, I am unable to identify a solution that can address my issue.
Can anybody please provide me with initial thoughts or any reference material that might help me to give this a start.
Any clue will be highly appreciated!
Thanks in advance
Mukul

mukul.object wrote:
Actually, my SOAP messages contains some critical information that needs to be encrypted.You think that its critical information however your third party doesn't. If they would have had same thought they would have enabled the security. As I said earlier, you will have to discuss this with them.
Another solution (however I don't know the viability in your case) could be to deploy one component before each third party service. Your web service will call this new component (Which is installed in their environment i.e. local to third party web service) and new component will forward the request to third party service. Now you can apply security/encryption/decryption between your web service and your component.
I have had a look in to XMLEncrytion using that I can encrypt my SOAP messages but I wonder how would other tools decrypt that.My above comments answers this.
Is there anyway I can encrypt my SOAP messages (without having to customize third party tools) in this scenario ??My above comments answers this.

Performance Issues with Location Services

I am having performance lag issues with most apps with location services turned on. This is a new issue that has crept up after update to iOS 4.2.1. Apps get slow and upon exiting the location service is still active as indicated by arrow icon in top right of screen. Any recommendation short of killing all location services? Note this even occurs in apple apps such as photos.

Have you tried basics from the manual?
restart.
reset.
restore.

Issue with Business Services on 11.1.1.8

I am creating DBAdapter services in jdev and then trying to create Business Services in OEPE. I was using the 11.1.1.4 with no issues, but had to upgrade so the server and dev tools were in sync for easy deployment.
Basically when you select the WSDL in the business service it does not see the port binding so you can't complete the creation of the service. It appears the new version does not import things correctly. In the previous version it referenced the WSDL but the new import WSDL looks nothing a like the previous version. I have a fair amount of experience doing this so I am kinda scratching my head as to the deltas and it not recognizing the port binding in the wsdl. Not sure if I need to upgrade jdev 10 11.1.1.6 as I am using 11.1.1.5.
Any help would be appreciated.

I found what the issue is but not sure what the fix is. I selected a sequence when on the last step of the wizard and that is causing issues with the wsdl file. If I remove that things work correctly

Issue with multiple digital signatues in form

Hello all-
I'm having an issue with a form that has multiple digital signatures. The form additionally has a listbox in which the user can select recipients to email the form to. My objective is to be able to send a form to various users by email to sign digitally. After extending the features for Reader, I inserted a standard Livecycle digital signature by clicking on one of the digital signature fields. However, after inserting the digital signature, I can't perform any other actions (email the form by selecting recipients from the listbox, clicking a different digital signature field for signature insertion, etc.) It is as if the digital signature instertion made an uneditable snapshot of the form, which I do not want to do. What can I do to rectify this process?
Will upload the form if necessary.
Thank you and happy holidays.
masber2000

Mr. Kumar,
The desired workflow is for
1)      Firefighter 1 to complete the top portion of the Agreement
section, sign in the Firefighter 1 signature field (which locks the top
portion of the Agreement Section), then select Firefighter 2 from the
e-mail drop down list and e-mail the PDF form to Firefighter 2;
2)      Firefighter 2 opens the e-mail and the PDF attachment,
completes the second portion of the Agreement Section, sign in the
Firefighter 2 signature field (which locks the bottom portion of the
Agreement Section), select Lieutenant 1 from the e-mail drop down list
and e-mail the PDF form to Lieutenant 1;
3)      Lieutenant 1 opens the e-mail and the PDF attachment, checks
the approved box, signs the Lieutenant 1 signature field, select
Lieutenant 2 from the e-mail drop down list and e-mail the PDF form to
Lieutenant 2;
4)      Step three continues through Lieutenant 2, Battalion Chief 1
and Battalion Chief 2
5)      Battalion Chief 2 sends the fully completed form back to
Firefighter 1 who copies the completed form to Firefighter 2
Note: if any of the officers disapprove the agreement the disapproved
form is immediately sent back to Firefighter 1
Jim Frazier, Deputy Chief
Villages Public Safety Department
3035 Morse Boulevard
The Villages, FL 32163
352-205-8280
Honor in Service

Issue with archiving (opentext) of adobe forms

Hi ,
We have an issue with archiving (open text) of adobe forms. When unfinished processes are restarted using Tcode /OTEI/PF_RESTART empty forms without data are archived. We are checking these forms using Tcode J6NY. PDF form is stored but data entered while processing the forms in portal is missing.
Any suggestion or help is highly appreciated.
Regards,
Kishore

Hi Prakash,
Do not use Data Binding tab to bind the Drop down,
Select Specify Item Values
There in binding tab specify binding and there are few more options to specify Item Text and Item Value.
Please find the below screenshot for the same.
Thanks & regards,
Rajkamal.

Issue with Shared Services 11.1.1

Hi all,
I have an issue with the shared services in version 11.1.1. When i am trying to click on the Application Groups on the left pane in the console, an error message has been displayed as " A communication error has occured while loading the view pane"
Please Help!!!

You shouldn't have to restart Essbase as it should automatically sync, there may be additional information in SharedServices_Security_Client.log though it is probably worth logging with Oracle.
Cheers
John
http://john-goodwin.blogspot.com/

Issue with using Dropdown in Adobe forms

Hi Gurus,
I am facing an issue with dropdown values after binding with a field in a table,
The first value in the dropdown is getting replaced by the selected value in dropdown in interactive adobe form.
Has any one come across this issue. Please guide me.
Regards,
Prakash.

Hi Prakash,
Do not use Data Binding tab to bind the Drop down,
Select Specify Item Values
There in binding tab specify binding and there are few more options to specify Item Text and Item Value.
Please find the below screenshot for the same.
Thanks & regards,
Rajkamal.

Issue with SAP_PD Service in HCM Forms

Similar Messages

Maybe you are looking for