Issue with SAPSSOEXT on 64bit

I am try to get the sample .net ASP application running from the SAPSSOEXT package. I have put the sapssoext.dll into the windows system32 directory and tried to register it with regsvr32. I get the following error:
"LoadLibrary("sapssoextr.dll") failed - This application has failed to start because the application configuration is incorrect. reinstalling the application may fix the problem."
I have downloaded the x64 package (matches my proc and os).
I have been able to register and use the sample on my i86 laptop wihtout issue. Wondering if anyone has seen this issue and has any sort of resultion...
Cheers,
Derek

I was running the web server in 32 mode (for trex) so the dll needed to be the i386 version.
Derek.

Similar Messages

  • Wifi Sync issue with Windows 7 64bit

    Hi, having an issue with wifi sync for some reason.  I am running Win 7 64bit, and I have tried everything on these forums with not luck.  It is not my router because it works on another computer with no problem.  I have enabled all ports, syncserver, etc. and nothing is working.  I have done a complete uninstall, registry clean, and reinstall with no luck.  I have noticed though on my computer when I check the box to allow my wifi sync to be enabled, all the box says is "Sync with this Iphone over....."  It does not say "sync with this Iphone over wifi".  The other computer I tried wifi sync with that worked said "sync with this Iphone over Wifi"  Any thoughts on what would cause my itunes to not display the full message?  I am using Itunes 10.6

    I don't like using wifi sync at all. Even with my iMac often does not detect my iPhone or my iPad when they both have Wifi turned on all the time. Even when it does work the sync speed is pretty horrendous. Anyways I'd recommend physically plugging it in whenever you can. Save you some time and trouble.

  • G530-44463​8U Sleep/Hibe​rnate issue with windows7 Ultimate 64Bit with 4GB ram

    I have a problem with Lenovo G530-444638U. I upgraded to 4Gb ram and installed a fresh copy of Windows 7 Ultimate 64bit and I’m facing sleep and hibernation problems. When I try to put laptop to sleep mode and I try to resume from sleep, it restarts by itself. I tried every single option in my power management and every command leads to restart. I also have the same problem with hibernate mode. When I try to resume from hibernate, it restarts and I have option on the screen to delete restoration data in order to continue,  
    Reading on Lenovo forums and Google search, it looks like it is a known issue.  I have the latest graphic and WAN drivers from Intel for win 7 and still I can’t solve issue. Is anyone has same model and expediting this problem, any help would be appreciated. 
    When I downgraded my ram form 4gb to 3gb then sleep and hibernate works fine.  i installed vista ultimate 64bit and had same sleep/hibernate issue. I called lenovo tech support and they told me to call software support, which is provided by third part and it is not free, i don't think it is software issue. I tried diffrent ram and had same issue.
    T6500(2.10GHz), 4GB ram 16HTF25664HY-667E1, BIOS Version     6GET19WW(for NON-HDMI), Lenovo Energy Management 4.4.1.1 2009-10-22 7.67 MB Windows 7 64bit 

    also one more issue i had... is when i try to boot up... somtimes it will go into a loop for a couple times. it will try to load windows(no blue screen)-->reboot--> and ask me if i want to use system recovery/start windows normally.
    any help will be greatly appreciated.
    Thanks very much.

  • Issues with processing on 64bit (java)

    Anyone running processing (http://processing.org) on a 64bit machine?
    I'm having some issues getting it running, works fine on my 32bit system though.
    My error is:
    ./processing: line 100: /home/action-owl/dev/processing/processing-1.0.9/java/bin/java: No such file or directory
    The file does exist, and it's executable, the processing forums have been a bit quiet lately.
    Thanks

    carlosgottberg wrote:Looking at /usr/bin/processing found out that you have to symlink /usr/bin/java to /usr/share/processing/java/bin/java .
    This doesn't seem to work for me, but maybe I'm doing it wrongly... Is this close to what you meant?:
    sudo ln -s /usr/bin/java /usr/share/processing/java/bin/java

  • Issues with trying to Sync of BB Tourch 9800 Organizer with MS Outlook 2010 (64Bit) using BB DM Ver 6.1.0.36 Bundle 38

    I am having ongoing issues with trying to sync contacts, memos calendar etc using the latest version of DM 6. I have uninstalled and reinstalled the DM software. I have tried to "remap" the fields as noted in the error messages only to get other error messages  including: "intellisync one or more configured folders is not available"
    I have on many occasions tried to reset the organizer in DM6, checking the box for calendar, address book etc only to go through the process of selecting MS Office and to complete the set up and then the check box is "unchecked" automatically. ( I must be doing something wrong)
    I have reviewed different KB fixes without any success - I may be able to re-sync after doing a suggested change but it will only work once they I am back to the same problem of not being able to sync my calendar etc.
    I have changed the WIN7 administrator levels as suggested.
    I am running Win 7 and MS Office Professional 2010 (64 Bit) which the latest version of DM 6 is supposed to work with.
    Any suggestions on how to get my organizer to stat syncing again?

    yes try click "sync"at bottom right

  • SATA Disks Issues with OEL 5.8 uek 64Bit

    Hi Oracle Linux Experts/Tech Gurus!,
    We are facing lot of issues with SATA disks at both Internal and External,
    if we use any SATA USB External Disk it make server hang and sometimes restart
    We face this issues with external SATA ARRAY connected at DS-3400
    1. Files under this SATA disk partition is gone.
    2. Disk free space not release after deleted files
    3. Server got hang and restarted many times
    4. Disk IO Performance is very slow
    (hdparm -t result 70MB/secs earlier it was 130MB/secs with RHEL32)
    This issues we are facing with this SATA disk array on SAN DS-3400 connected via QLA2460 Qlogic 4G Fiber HBA Card.
    We are not faced any issues before with RHEL32Bit OS on this same HW Setup, once we changed to OEL5.8 64
    Please help us to fix this issue with SATA Disks on this OEL 5.8.
    Thanks & Regards,
    Prabhakar.D
    Edited by: dpprabhuindia on May 14, 2013 7:08 PM

    And here is the output of scli -i (SANSurfer cli tool)
    ~]# scli -i
    Host Name : xxxxxxxx
    HBA Instance : 0
    HBA Model : QLA2460
    HBA Description : QLA2460 PCI-X 2.0 to 4Gb FC Single Channel
    HBA ID : 0-QLA2460
    HBA Alias :
    HBA Port : 1
    Port Alias :
    Node Name : 20-00-00-E0-8B-8B-25-F8
    Port Name : 21-00-00-E0-8B-8B-25-F8
    Port ID : 61-09-13
    Serial Number : GFC0640H84421
    Driver Version : 8.03.07.08.32.1-k
    BIOS Version : 1.12
    Driver Firmware Version : 5.03.13 (496)
    Flash BIOS Version : 1.12
    Flash FCode Version : 1.16
    Flash EFI Version : 1.04
    Flash Firmware Version : 4.00.18
    Actual Connection Mode : Point to Point
    Actual Data Rate : 4 Gbps
    PortType (Topology) : NPort
    Target Count : 1
    PCI Bus Number : 6
    PCI Device Number : 1
    HBA Status : Online
    Host Name : xxxxxxxxxxxxx
    HBA Instance : 1
    HBA Model : QLA2460
    HBA Description : QLA2460 PCI-X 2.0 to 4Gb FC Single Channel
    HBA ID : 1-QLA2460
    HBA Alias :
    HBA Port : 1
    Port Alias :
    Node Name : 20-00-00-E0-8B-92-FB-B6
    Port Name : 21-00-00-E0-8B-92-FB-B6
    Port ID : 61-0B-13
    Serial Number : RFC0641M26491
    Driver Version : 8.03.07.08.32.1-k
    BIOS Version : 1.12
    Driver Firmware Version : 5.03.13 (496)
    Flash BIOS Version : 1.12
    Flash FCode Version : 1.16
    Flash EFI Version : 1.04
    Flash Firmware Version : 4.00.18
    Actual Connection Mode : Point to Point
    Actual Data Rate : 4 Gbps
    PortType (Topology) : NPort
    Target Count : 1
    PCI Bus Number : 10
    PCI Device Number : 1
    HBA Status : Online
    Please advice how to upgrade firmware for this HBA Card
    Edited by: dpprabhuindia on May 14, 2013 7:14 PM

  • Apple 27'' Cinema display issue with nvidia quadro 1800 - Win 7 64bit

    Hello,
    I'm trying to help out a buddy of mine with his cinema monitor.
    He has a Windows 7 x64 machine, with a Nvidia Quadro 1800 - monitor hooked in via DVI port.
    Basically when you boot the PC up with the Apple monitor, the monitor turns on and backlit but no display, no options for BIOS or anything like that, just lit up and black screen.
    I can boot up the PC with a Dell monitor and it boots up fine - and if I take the DVI out of the Dell monitor and plug it in to the Apple monitor while the machine is up and running, the Apple monitor comes on and works without issue - however, if you were to reboot it, or if it goes to sleep - I lose the Apple monitor, and have to start the process over.
    The Windows machine recognizes the Apple monitor, it displays as Cinema monitor - all the video card drivers are up to date - also had the same issue with a previous video card (I swapped the video cards out thinking initally it was a bad video card)
    What am I missing? 
    Thanks!

    Hello,
    I'm trying to help out a buddy of mine with his cinema monitor.
    He has a Windows 7 x64 machine, with a Nvidia Quadro 1800 - monitor hooked in via DVI port.
    Basically when you boot the PC up with the Apple monitor, the monitor turns on and backlit but no display, no options for BIOS or anything like that, just lit up and black screen.
    I can boot up the PC with a Dell monitor and it boots up fine - and if I take the DVI out of the Dell monitor and plug it in to the Apple monitor while the machine is up and running, the Apple monitor comes on and works without issue - however, if you were to reboot it, or if it goes to sleep - I lose the Apple monitor, and have to start the process over.
    The Windows machine recognizes the Apple monitor, it displays as Cinema monitor - all the video card drivers are up to date - also had the same issue with a previous video card (I swapped the video cards out thinking initally it was a bad video card)
    What am I missing? 
    Thanks!

  • Issues with logging in to CC and missing features

    My team is using CC on corporate environment PCs, Win 7 64bit. Some of the problems we have seen are:
    When we buy a new adobe license for a new user our IT department has to install the Creative Cloud desktop manager and software on their PC. They do this by using an admin windows account and the new adobe login. Everything works fine for them, they are able to log in to CC and install the software, When the user logs in with their windows account and try to log in to CC with the same adobe id then they get the common issue with the sync button just turning and never logs them in. In some cases this is fixed by deleting the OOBE folder from the admin local profile allowing the other user to log in to CC but most times the IT has to resolve to rebuilding the PC and starting again.
    We also hotdesk in my team.I found that when i work on my laptop or another desktop pc in the team everything is fine but if i have to use a different PC for the day i log in but don't have all the features (I can get the home feed, fonts, etc, but not the app installers)
    Another member of my team works fine on that same PC but on a different PC she doesn't have all features. She gets the app installers, but not some of the other features.
    It all seems to be a bit random as to who can access what.
    Our corporate firewall is open to most Adobe servers, unless there is something we have missed. PCs have Adobe Air 3.1.0.4880.
    These issues have been happening for months now and IT have spend hours to resolve.
    Anyone else has issues using Creative Cloud in a corporate environment and are there any suggestions we can use please?

    There isn't any capability for the OpenBootProm prompt
    (the OK prompt you might see on your screen)
    to ask you for a username or a password.
    The OBP is a firmware level of the SPARC platform, not an OS nor a mini-OS.
    If you have consoled in through the SF280R's RSC card, it might have its own password prompt, but the OBP itself can't do that. Additionally, the RSC doesn't show you the OK prompt either (certainly not to the extent that the more sophisticated LOM, ALOM, ILOM or System Controllers of other system designs might have.).
    You made mention that you eventually see a cursor that is sitting at a prompt that shows:
    Happy@solaris11 $If that is what you see, then I think you're already logged into the OS. That would seem to be a C-shell prompt, with you logged into a fully booted system named "solaris11" as username "Happy".
    Consequently, I'll be asking that your post be moved out of the Servers'General hardware forum, and into the General Solaris 11 forum. You don't seem to have a hardware issue, but perhaps just an issue with being unfamiliar with Solaris. (You didn't describe your experience level in the initial post.)

  • SAP GUI Compatibility issue with Windows 2008R2 64 Bit

    Hi Gurus
    Is anyone experienced connectivity issue with SAP GUI (32bit)  on Windows 2008R2 64bit? Except base version of 7.3 every Service Pack failing
    to connect, Strange thing was it was working with SP5 in WINDOWS 7 64bit.
    Your inputs greatly appreciated.
    -giri

    Hi Giri
    Yes, You can do the normal installation on windows 2008 / 2008 R2 systems. we are using in our environment. is this any error message while installation or SAPGUI execution time?
    Refer the SAP Note  66971 - Supported SAP GUI platforms
    BR
    SS

  • Performance issues with Motion (position, scale, rotate) and GTX 590

    I'm experiencing performance issues with my Premiere Pro CC when I scale, position or rotate a clip in the program monitor.
    I have no performance issues with playback! It's only, when i move something with the mouse or by changing the x,y-values of Position in the Motion-Dialog in video effects.
    Premiere then lags terribly and updates the program monitor only about once per second - this makes it very difficult and cumbersome to work and position things.
    On a second Premiere installation on my laptop, performance is fine and fluid - allthough it doesn't have GPU support and is a much slower computer.
    I'm pretty sure this has somehow to do with my graphic card, which is a Nvidia GTX 590.
    I was told by the support, that it is actually a dual graphic card, which is not supported/liked by Premiere.
    The thing is, until the latest Premiere update, I did not have performance issues at all with this card.
    I also read on the forum that others with the GTX 590 did not experience any problems with it
    So where does this come from?
    There is no change in performance whether or not I activate Mercury Playback Engine GPU acceleration.
    I also tried deactivating one of the 2 gpus, but there also was no change.
    Does anyone else know this problem and has anyone a solution?
    I'm running Premiere CC on a Win 7 64bit engine, Nvidia GTX 590, latest driver (of today),

    I am suffering from the same phenomenon since I updated just before christmas, I think.
    I am hardly able to do scaling, rotating and translating in the program monitor itslef - whil motion has been highlighted in teh effect controls.
    In the effect controls I can scale, rotate etc however.
    Also I have noticed there is a yellow box with handles in teh program monitor. I remember it was white before.
    I cannot figure out what to change in my preferences. What has happened?
    best,
    Hans Wessels
    Premiere CC
    Mac Pro OSX 10.7.5
    16 GB 1066 MHz DD3
    2 X NVIDIA GeForce GT 120 512 MB

  • Issues with itunes error -50, determining gapless playback, missing speaker options, home sharing not working

    In the last few weeks I have been experiencing multiple issues with my iTunes.
    I believe it began when my itunes library corrupted and I had to start again.
    By starting again I mean I went to previous itunes libraries and used the most recent backup.
    After I noticed a large number of unknown error (-50) messages I thought I better copy the backup I was using from the previous libraries folder over to the itunes folder (in case the error related to failed attempts to back up the library).
    This problem in itself wasn't too bad as I am able to close and relaunch iTunes and carry on however I have noticed some less desirable side effects - the loss of home sharing. I am unable to pick speakers to broadcast to (I have 2 airport express units plugged in and working and an Apple TV2) and I am unable to access the iTunes library on Apple TV.
    I've done some basic troubleshooting: creating rules to allow the home sharing ports, temporarily disabling antivirus/firewall, uninstalling antivirus/firewall, setting up rules on the router for homesharing ports, uninstalling iTunes, rebooting, reinstalling iTunes and retrying, disabling home sharing and reenabling, disabling peerblock, deauthorising itunes and reauthorising and rebooting both the pc and Apple TV, checking sharing settings under preferences and verifying both the entire library is shared and that the status of home sharing is on but no devices connected, created a new library and reimporting my media and the problem still exists.
    I noticed that occasionally when I switch between libraries, deauthorise and reauthorise I do get access to home sharing and Apple Tv gets full access to the library BUT iTunes quickly becomes unresponsive and when I close and relaunch Apple TV can no longer see my library or iTunes.
    I have checked the network I am running on is marked as a home network, I have tried connecting the Apple TV via LAN instead of WiFi but this makes no difference. What I do find interesting is that I have iTunes running on another pc and on a virtual machine and as soon as I run either their libraries appear on Apple TV so there must be something about the installation on my pc and nothing wrong with the Apple TV, airport express, router etc.
    With that in mind I retried an uninstall and this time deleted as many tmp files as I could see in the iTunes library folder, rebooted and reinstalled. I also checked the permission levels on the iTunes application folder and the iTunes library folder (located on an additional internal drive), I then tried running iTunes as an administrator (which my user account is already set as) but all the problems are still evident.
    The determining gapless playback has no effect on how I use iTunes but it clearly does not need to run for every single recently added track any time I make a minute change to other library entries. I tried looking up one of the files it was determining gapless playback for but it wasn't corrupt or read only so I don't see why it needs to retry continually.
    I'm running Windows 7 64bit with all latest updates installed and iTunes 64bit 10.6.3.25, all apple devices are running the latest version of firmware and I'm running out of ideas. I did try running CCleaner to clear up and registry issues if there were any and I ran Appcleaner to remove any iTunes cache that may have been left between installs. I'm running out of ideas - what am I missing here?

    I have found the problem was in part caused by Windows firewall.
    Exactly how Windows firewall can cause the problem when I wasn't even using it I don't know.
    What I do know is that when I checked 'allow a program through the firewall' I found 4 rules set for iTunes, one of which was public network access.
    I deleted the superfluous rules and the Home Sharing problems are solved.
    All that needs sorting now is the 'determining gapless playback'.

  • ITunes and iPhone 4 sync issues with Windows 7 64 bit

    I am getting several errors with sync'ing iTunes to my iPhone on windows7 64bit. I reinstalled iTunes, I did a repair on iTunes, even tried a RESTORE on iPhone, but it gives me so many errors one after another after another.
    1. Some of the items were NOT copied to iPhone "iPhone" because one ore more errors occured.
    2. Attempting to copy to the disk "iPhone" failed. An internal device error occured.
    3. The iPhone "iPhone" can NOT be synced. An unknown error occured (0xE8004006).
    4. The iPhone "iPhone" can not be synced. The required file can not be found.
    5. The iPhone "iPhone" can not be synced. A duplicate filename was specified.
    6. The iPhone "iPhone" can not be synced. An internal device error occured.
    These errors keep appearing one after the other.
    I have fully uninstalled iTunes and ALL Apple programs from my PC, rebooted, disabled antivirus/firewall software, etc.
    I have tried changing time zones.
    I have created a new user account on same laptop and still have same issues with iTunes.
    Restore fails with error "Unable to read file or file is corrupt".
    Yet iTunes works fine on a 32bit operating system of Windows 7.
    The problem is that I upgraded my laptop and the new laptop is Win7 64bit. I have ALL the newest drivers, and I checked to ensure it was not a BIOS or CHIPSET driver causing issues. All windows updates are up to date and current.
    I have been trying for over a week with every piece of trouble shooting I can find to make this work.
    Any help or further information would be VERY GREATLY APPRECIATED.
    Thanks in Advance

    I too am having the exact same issues on the same laptop! I spent an hour last night with "supervisor" in tech support who didn't solve my problem but did close the ticket (210757099 for any Apple people that might read this). Thanks a lot Ben!
    I have seven ipod/iphone/ipad devices so I am very familiar with how to sync. In the last few weeks, version 10.2 of iTunes (I'm up to 10.2.1.1) has gotten less and less reliable in successfully sync'ing to the devices. It started out with my 3GS, but my iPhone 4 was fine. Then I got an iPad2 and now NOTHING will sync properly. Every time I plug one in (or press the sync button) it wants to do a restore from the backup made the last time it sync'd. It does that, reboots the device and sync's.
    I've gotten a ton of errors, here's a sample.
    iBooks couldn't be installed on my iPhone unknown error 0xE800000C
    Textie couldn't be installed on my iPhone, unknown error 0xE8000013
    "failed required file not found" - This is one of my favorite error messages. It demonstrates how Apple is becoming like Microsoft. It is 100% accurate and totally useless. It would be helpful if it told me the NAME of the file that was not found...
    unknown error 0xE8004006
    "duplicate file found" - Again, in true Microsoft form, it didn't tell me the NAME of the file that was duplicated.
    I tried everything discussed in the following thread but it did not work.
    http://discussions.apple.com/thread.jspa?threadID=2401822
    Stopping the enhanced USB controller didn't work. Mine is the Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller (version 9.1.1.1020).
    A few days ago I got hundreds of errors in a sync. When it completed, a dialogbox came up asking if I wanted to send this crash report to Apple, I said yes. So, crash reports are now automatically being sent. You can see evidence of this in the %appdata%\Apple Computer\Logs directory.
    This section of the log looked interesting because it says it couldn't connect to USB mux port 32498
    [4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] AMDServiceConnectionReceiveMessage (thread 4232): Could not receive size of message: 0 No error
    [4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] readthread (thread 4232): Could not receive message: 0xe8000001
    [4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] AMDServiceConnectionSendMessage (thread 2504): Could not send message size: No error
    [4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] connect_toport (thread 5700): Could not connect to USB mux port 32498 for device 3: Input/output error
    [4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] MobileDeviceConnectlocked (thread 5700): Could not connect to lockdown port on device
    Just grasping at straws here....

  • Z87-G65 power issue with usb(port reset failed)

    All,
    I'm having an issue with my motherboard and wanted to see if anyone had suggestions.  In windows 8.1 if I have my webcam or external hard drive plugged in USB.  I get this error the the USB device is not recognized and the port reset failed(code 43).  I noticed when I turn on the PC and it's booting the light on the webcam and hard drive flash like it's not drawing enough power to stay on.  The boot sticks at 9c on the screen and I have to reset.  When windows boots they turn off.    Since it's before windows boots I think this is either a MB issue or a power supply issue.  I have a corsair 750 watt power supply so plenty of power.  Any ideas?

    Board: MSI Z87-G65
    Bios: Version 1.9
    VGA:   MSI Gaming N780 TF 3GD5/OC GeForce GTX 780 3GB 384-bit GDDR5 PCI Express 3.0 SLI Support Video Card
    PSU:   CORSAIR HX Series HX750 750W ATX12V 2.3 / EPS12V 2.91 SLI Ready CrossFire Ready 80 PLUS GOLD Certified Modular Active PFC Power Supply New 4th Gen CPU Certified Haswell Ready
    Intel Intel Core i7-4770K Haswell 3.5GHz LGA 1150 84W Desktop Processor Intel HD Graphics BX80646I74770K
    MEM: CORSAIR Dominator Platinum 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1866 Desktop Memory Model CMD16GX3M2A1866C9
    HDD: SAMSUNG 840 EVO MZ-7TE500BW 2.5" 500GB SATA III TLC Internal Solid State Drive (SSD)
    COOLER: NZXT Kraken X60 RL-KRX60-01 Ultra Performance Water/Liquid CPU Cooler 280MM
    OS: Windows 8.1 64bit Professional
    CASE:  NZXT H630 CA-H630F-W1
    I am plugging them into the USB 2.0 ports on the back of the motherboard, but it doesn't seem to matter where I plug them in I get the same errors.

  • Library issues with Windows 7 (64 Bit)

    I have just upgraded to a new computer and have had enormous issues with I tunes 64 bit for Windows 7. I had my music on another disc which I have mounted into the new computer. It is the same drive name (D) as on my old computer (Windows XP 32 bit). I Tunes finds my libray and I can see all my songs. However, 1. All of my existing artwork is missing.
    2. When I try to play any song it says file not found?
    I have authorised the new PC, but still no joy.

    Did you download the 64bit version of iTunes? I have Win7 Pro 64 bit and iTunes works on my pc. Just keep in mind that when you upgrade your OS, that doesn't mean that your programs automatically switch to 64 bit too, you may need to do a lot of re-installing of some of your programs

  • Driver issue with Cisco HD Precision / JFV 4.4

    Hi,
    Just to installed Jabber for Video4.4 on my laptop ( win7 64bits)
    all works fine except the video!! i use a Cisco HD precision wih Jabber, may be a driver issue, the camera is not recognized.
    When i selected my integreted camera from laptop, the video is going up.
    i've already the same issue with Jabber Video 4.3.
    Does anyone has got the same issue? Any idea?
    Thanks

    Thread back from the dead...
    I have this exact scenario playing out today trying to use a PrecisionHD USB camera with Windows 7. Completed the 1.5 update listed here and following the update I see the results in the picture. The LibUSB device is present, and it looks like a Tandberg HD camera is known to the system, but not accessible/usable.
    Anybody have success with this issue or have any additional ideas to try?

Maybe you are looking for