Issue with saving SAP& variant for report as per OSS note 1885125

Hi,
I'm implementing OSS note 1885125 and it instructs me to adjust several SAP& variants:
The variants of the report RSUSR070 (SAP&_AUTH, SAP&_CHANGE, SAP&_PROFIL, SAP&_STANDARD,
SAP&_TRANSAKT, SAP&_VALUES)
must be adjusted.
Call transaction SE38 for the report RSUSR070 in the client 000. Change the values for the relevant
variants. On the selection screen, choose "+" ("All Selections" (Ctrl+F7)):
l Select the "All Roles Irrespective of User Assignment" radio button.
For the variant SAP&_BENU, you must select the "With Valid Assignment Of" radio button.
If the variants are protected, run the report RSVARENT for each variant."
Now I'm in client 000 and I can unprotect the variants with report RSVARENT, but then SAP tells me that SAP& is the SAP name space, and that I need to create new variants. So it doesn't let me save these. The whole point of the OSS note requesting the SAP& variants to be adjusted is because they are using in SAP standard transaction codes:
S_BCE_68001418
Roles by Role Name
S_BCE_68001419
Roles by User Assignment
S_BCE_68001420
Roles by Transaction Assignment
S_BCE_68001421
Roles by Profile Assignment
S_BCE_68001422
Roles by Authorization Object
S_BCE_68001423
Roles by Authorization Values
S_BCE_68001424
Roles by Change Data
S_BCE_68001425
Roles by Complex Criteria
S_BIE_59000249
Roles By MiniApp
Any advice how to get round this issue please?
Thank you
Philipp

Ansel,
Thanks again!
In RSA1 ->Transport Connection, yes, I can see the Source System objects.
In the Source System objects, I have selected the ECC source system and dropped it to the right panel.
Now I can a list of Datasource and Transfer Rules there.
1) Does it mean these are all the source system related objects?
I then create the normal transport request to capture all the objects. And release the Transport.
2) Now how can I export this transport?
What I try to do is to delete the existing SAP Source System. Create the new SAP Source System, then import back all the source system related objects...... so that my existing data model will not disappear after deleting and creating the new SAP Source System.
Is the following steps correct?
1) Collect all the Source System related objects and capture in Transport.
2) Release and export the Transport (but how?)
3) Delete the SAP Source System
4) Create new SAP Source System
5) Import the existing SAP Source System related objects (but how?).
Please help, thanks in advance.

Similar Messages

  • Issue with Varchar2 field conversion for report output generated in EXCEL

    Hello All,
    I have an unique problem with one of my new reports for the User. The user wants the report output generated in excel data only(delimited data) format *(reports builder 10g)* .
    Everything was fine until i encountered this problem, there was this field which has unique ID's(alphanumeric and numeric), when i tried to run the report and generate output in Excel the numeric ID's say for example *(41593497999679354429)* is converted in excel and displayed like *(2.5881E+19)* and after format cells in excel it displays *(41593497999679300000).*
    The issue is only with 20 digits numeric ID's , if i append any special character to the end say '#' or '..' it shows the exact value along with the appended character. But the user insist they need only the value that is in the table. I am finding it hard to figure out, if any one of you have encountered the same issue or if any of you have any suggestions to overcome this excel conversion thing please do advice me.
    Thanks in advance :)

    Thanks for you response, but i already tried what you suggested, instead of appending single quote in front of ID, i did at the end prior with '#', it preserves the value if i add any character to the id but the appended value shows up too :(.
    Well, i just got the solution and it did work, thanks to [Brian Hill|https://forums.oracle.com/forums/thread.jspa?threadID=651632] for the post, i did what exactly he said and it worked. I was so very happy and wanted to share with everyone.

  • [svn:fx-trunk] 12982: Fix for issue with exposing accessible names for combobox list items

    Revision: 12982
    Revision: 12982
    Author:   [email protected]
    Date:     2009-12-15 20:44:23 -0800 (Tue, 15 Dec 2009)
    Log Message:
    Fix for issue with exposing accessible names for combobox list items
    QE notes: none
    Doc notes: none
    Bugs: n/a
    Reviewer: Gordon
    Tests run: checkintests
    Is noteworthy for integration: no
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/ComboBoxAccImpl.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/ListBaseAccImpl.as

    Add this to the end of your nav p CSS selector at Line 209 of your HTML file, after 'background-repeat...':
    margin-bottom: -2px;
    Your nav p will then look like this:
    nav p {
              font-size: 90%;
              font-weight: bold;
              color: #FFC;
              background-color: #090;
              text-align: right;
              padding-top: 5px;
              padding-right: 20px;
              padding-bottom: 5px;
              border-bottom-width: 2px;
              border-bottom-style: solid;
              border-bottom-color: #060;
              background-image: url(images/background.png);
              background-repeat: repeat-x;
              margin-bottom: -2px;

  • Hi All, can i have some production support issues with rootcasue and resolution for SAP TM?

    Hi All, can i have some production support issues with rootcasue and resolution for SAP TM?
    Thanks,
    Sreenivas

    Hi Sreenivas,
    I would recommend that you read the Rules of Engagement and other documents in the Getting Started link (top right) before posting anymore.  Your Discussion will most likely get reported as non-specific and get removed.  If you have a specific problem with TM, please post it in a new thread with error messages, version and SPs installed, and how the error occurs and what you are trying to get TM to do.
    There are a lot of resources available in the TM Overview page which can help, so start there and maybe also look at some of the MKS (Monday Knowledge Session) recordings which should also be listed.  There are also a lot of experienced people who can help resolve issues your TM installation, but you need to provide enough information on the problems you are having.  If you are just looking for information on past problems, do a Search or simply browse through past Discussions which are marked with a green Check (Correct Answer).
    Regards, Mike
    SAP Customer Experience Group - CEG (and a Moderator)

  • Issue with table ROOSPRMSF entries for data source 0FI_AP_4

    Hi Experts,
    I am facing with an issue where we found incosistencies with table ROOSPRMSF in R/3 system.
    In BW , we have done initializations based on fiscal period selections (none of the selections overlap) for data source 0FI_AP_4.
    We have done in total 7 initializations. So in BW system in table RSSDLINITSEL we have 7 initialization requests.
    But in R/3 system we have 49 records for data source 0FI_AP_4 in ROOSPRMSF table out of which 42 are invalid records.
    I suspect that these 42 invalid records are created due to the execution of program RSSM_OLTP_INIT_DELTA_UPDATE when the tables ROOSPRMSF are actually holding the 7 initialization request entries.   Due to this each and every initialization request is linked to rest of the other intialization requests and ended with 49 records in table ROOSPRMSF table.
    Now our data loads are running fine but daily a short dump is raised . In the daily loads, BW init records in RSSDLINITSEL are compared with ROOSPRMSF entries and all the other 42 records which are invalid are written into system log and a short dump is raised.
    In order to fix these inconsistencies i checked for OSS note 852443. (Point 3 in OSS note)
    But it is specified to delete the delta queue for data source 0FI_AP_4 in RSA7 and instructed to execute the program RSSM_OLTP_INIT_DELTA_UPDATE so that the ROOSPRMSF table will be reconstructed with valid records available in RSSDLINITSEL. 
    From OSS note 852443 point 3
    "3. If the RSSDLINIT table in the BW system already contains entries, check the requests listed there in the RNR column in the monitor (transaction RSRQ). Compare these entries with the entries in the ROOSPRMSF and ROOSPRMSC tables with the INITRNR field. If, in the ROOSPRMSF and ROOSPRMSC tables for your DataSource source system combination, there are more entries with different INITRNR numbers, use transaction RSA7 in an OLTP source system to delete all entries and then use the RSSM_OLTP_INIT_DELTA_UPDATE report mentioned in the next section. For a DataMart source system, delete the entries that you cannot find in the RSSDLINIT table using the procedure described above."
    My question is if we delete the delta queue in RSA7 then all the tables in R/3 (ROOSPRMSF, ROOSPRMSC, Time stamp table) and BW (RSSDLINITSEL, initialization requests will be deleted) will be cleared. Then how will the program RSSM_OLTP_INIT_DELTA_UPDATE  copy entries into ROOSPRMSF table in R/3 ?
    Could any one please clarify this ?
    Thanks
    Regards,
    Jeswanth

    Hi Amarnath,
    Did you unhide the new field in RSA6 and regenerated the DataSource?
    Often SAP will populate newly added fields (belonging to the same (set) of table(s) used for extraction) automatically (e.g. SAP uses 'move-corresponding' in it's extractor-code, or, in this case, reading all fields from the DD, FM BWFIU_TRANSFORM_FIELDLIST).
    If the DataSource looks fine to you and the field is still not populated in RSA3 you can't go without a user-exit.
    Grtx,
    Marco

  • SAP Report Painter - SAP tables for report items and hierarchy

    Hello,
    can you pls. help me with an information about the list of SAP tables for Report Painter, particularly the tables where the report items/positions and report hierarchy are stored?
    for example, for the Report Writer report items and report hierarchy can be found in T8* tables.
    What are these tables for Report Painter?
    thank you in advance for any info.
    Regards,
    Jasminka
    Edited by: Jasminka Vlahovic on Dec 29, 2010 8:53 PM

    Hi  Jasminika ,
    Could you please share with me those tables names where report items  and hierarchy are saved
    Regards
    Neeraj

  • Issue with saving sales document.

    Hi,
         I have an issue with saving the sales document.
    When I save any sales document ( Order, Quotation, Contract, Delivery) its successful and showing document no in the information bar.
    But when I try to view or change the document, it shows no document exist in the database. Its not even in the archive.
    Any solution for this issue.
    Cheers
    Senthil

    Dear Senthil,
           This is related to technical issue (Database Updating) so you please take help from BASIS or ABAP people they will help you to fix this issue.
    I hope it will help you
    Regards,
    Murali.

  • URGENT: Issue with hierarchy level keys and report drill down

    Hi,
    BASIC STRUCTURE:
    I have created a subject area with 3 facts (FACT_A, FACT_B, FACT_C) and 4 dimesnions (TIME_DIM,DIM_2,DIM_3,DIM_4). Each fact table also has additional aggregate tables aggregated along levels of the time dimension. Also our timw dimension has aggregated dimension tables like TIME_DIM_WEEK, TIME_DIM_MONTH, TIME_DIM_QUARTER and TIME_DIm_YEAR.
    GOAL:
    All 3 facts have the same measures M_1 and M_2 in them but may not have data for the same dimension values selected.
    For example
    For month JAN 2000 FACT_A.M1=100$ and no data exists for JAN 2000 in FACT_B and FACT_C. Then in the report
    for JAN2000 it should show FACT_A.M1= $100, FACT_B.M1 = 0 and FACT_C.M1 =0. In this case I should be able to drill down to the lowest level.
    ISSUE:
    The time dimension TIME_DIM has the following levels - Total -> Year -> Quarter -> Month -> Week -> Day
    However I am having an issue with drill down in the reports whenever I pull metrics from more than 1 fact at a time. I have defined the level keys but not sure if I need to do anything in addition since I am using aggregates.
    I have to fix this issue quickly. Please help me.

    Alastair,
    All the fact tables have aggregated facts as sources.
    I have checked the levels set for each of the sources to the time dimesnion table in BMM and they look okay. So the Time dim table in BMM has 4 source tables
    Time_Day (level set to day, table key is "day"),
    Time_month (level set to month, table key is "Fiscal_Month_Code"),
    Time_Quarter(level set to quarter, table key is "Fiscal_Quarter_Code") and
    Time_Year(level set to year, table key is :Fiscal_Year_Code").
    Note: No time week aggregate added as logical source.
    Again the time dim hierarchy based off of this table has levels: Total -> Year ->quarter -> Month -> week -> day
    The levels keys set for each level are
    Year -> Primary key is Year_Name (YYYY)(Checked as chronological key) and another key is Year_Num (YYYY)(Checked as chronological key)
    Quarter->Primary Key is Quarter_Name (YYYY Qn), another key is Quarter_Number (Format n where n can assum values 1,2,3,4). Both keys are set as chronological keys
    Month -> Primary key is Month_Name (MON YYYY), another key is Month_Num (Format n where n can assume values from 1 to 12) Both keys are set as chronological keys
    Week -> Primary Key is week name (YYYY Wk nn, where nn can have values from 1 to 53), another key is week num (nn, where nn can have values from 1 to 53)
    Day -> primary key set to day (date format)
    Issue1: When I try to drill to lower levels it throws out an error saying report cannot find any data because filters may be too restrictive even though I see data at higher level
    For ex: If I drill down to Year: 2010 and Qtr: 2010 Q2 and M1:$100 when I click on Qtr to drll to month level it throws me the error
    Issue2: when I add year and qtr colums to the report I see data as below which is incorrect
    Year_Name Qtr_Name data:FACTA_M1 Data: FactB_M1
    2009 2009 Q1 $10 $5
    2009 2009 Q2 $20 $80
    2009 2009 Q3 $20
    2009 2009 Q4 $30
    2010 2010 Q1 $100
    2010 Q2 $101
    2010 Q3 $102 $230
    2010 Q4 $103
    2011 Q1 $10
    In the above example year_name is not showing up for 2010 Q2 and after. However if I change the primary key for level 'Quarter' by having key consist of year name and quarter name instead of just quarter name the issue doesnt occur and drill down works great. The only issue is when I drill from qtr it first shows year name and quarter name instead of showing the next level which would be month name.
    Sorry about the long message but I thought you might notice something in how I have set up the keys.
    Thanks

  • Selection screen variant for report

    Hi,
    Can we restrict the selection screen variants for reports by user? For example my report is ZREPORT. Different users can save variants for the report. When they choose a variant for executing the report, they would like to see only the variants they created.
    By default SAP lists all variants created (irrespective of who created).
    Thanks
    Anil

    Hi,
      If you want the other users doesn't want to execute (Not see) other variant..you can check if that user has created the variant in the AT SELECTION-SCREEN event..
      By checking VARI-VARIANT against the table VARID and check if sy-uname <> VARID-ENAME.
    Thanks,
    naren

  • Issue with Saving the Query output data in Excel format

    Hi,
    Recnetly we had upgraded from 4.6c to ECC 6.0.
    In ECc 6.0 environment, when user try to export the query output , we are getting only XML option to save the data.
    But user want to save the data in EXcel format, he was able to do that in 4.6C.
    pleas eprovide some inputs, on this issue.
    Thanks,
    Sanketh.

    I cannot for the life of me imagine, why a link to a post in the 'Business One Forum' where one uses ODBC to transfer query-data to MicroSoft Excel is of relevance to the OPs question, even if the same is not a security issue.
    Never mind. [note 40155|https://service.sap.com/sap/support/notes/402155] deals with various symptoms in the ALV-Excel combination as as of release 4.6C. There are various others, mostly in components BC-SRV-ALV and BC-ABA-LI - also: I remember that when we upgraded from 4.5B to 4.7C there was an issue with Excel-templates -> the solution was in the release notes somewhere. So, in addition to SMP you might want to check the release notes and/or upgrade guide for solutions.
    And yes, moderators ... this is not a security issue, this should go to ECC-Applications/Upgrade.

  • ALE Error + Mass deletion of variants for Reports

    Hi,
           I have two questions
    1- is there any transaction in SAP, which delete the mass variants for reports for all users?
    2- I am getting an error  “An Idoc without a message type was passed to the ALE layer”.
    I have already check file port is set up correctly and I am passing message type “HROT_BRM”.
    This also happen in previous test, as user does not have the proper authorization, so I assign the authorization and ran it. It worked.
    However, this time a user has the authorization and still the error messaging is coming. Am I missing something?
    Waiting
    Bye

    There are some function modules like "KYVA_REPORT_VARIANTS_DELETE” or get user variants "RM_GET_VARIANTS_4_REPORT_USER".
    - is there any transaction in SAP, which delete the mass variants for reports for all users?
    2- I am getting an error “An Idoc without a message type was passed to the ALE layer”.
    I have already check file port is set up correctly and I am passing message type “HROT_BRM”.
    This also happen in previous test, as user does not have the proper authorization, so I assign the authorization and ran it. It worked.
    However, this time a user has the authorization and still the error messaging is coming. Am I missing something?

  • Directory Caching issue with Cisco Jabber client for Windows

    Hi ,
    I am facing cache issue with Cisco Jabber client for Windows. If I do any change related to modification or deletion of contacts in Active Directory/ Callmanager, it does not reflect in the Jabber. Because jabber takes the contacts from the locally stored cache file in the Windows system.
    Every time I have to remove the cache file to overcome this issue, practically it's not possible to do the same with all the Widows users. As, if any employee leaves the company and still I can see his contact appears in the "Cisco Jabber client". I have not seen this issue with Android/Apple iOS.
    Is there any automated way to remove the cache file? 
    Here is the detail of CUCM,Presence and Jabber.
    CUCM version: 9.1.x
    Presence          : 9.1.X
    Jabber              : 10.5 and 10.6

    Hello
    On our environment we had to install a dedicated Microsoft Certificate Authority "just for Cisco Jabber usage" to house the
    Network Device Enrollment Service.
    Our certificate for the CUPS were generated on this Certification Authority too.
    I discussed this certificate matter with my colleagues this afternoon and nobody seems to remember how these certificates were deployed into the
    Enterprise Trust store for the users.
    But I think they asked all 400 users to accept the 3 certificates by answering "yes" to the popup instead of using a script deployed by GPO...
    I wish you success with that deployment and really hope you have a technical partner that *Knows* this subject.
    Our partner left us alone with that unfortunately.
    Florent
    EDIT: If the "Certutil script method" works, please let me know. This could be useful in our own deployment.

  • I have an hardware issue with my iphone 5 64gb. its lock button in not working. for a fact i know that it can be replaced but my question is this that do they require the bill or anything to replace or they only require the phone in usa

    i have an hardware issue with my iphone 5 64gb. its lock button in not working. for a fact i know that it can be replaced but my question is this that do they require the bill or anything to replace or they only require the phone in usa

    Warranty and support is only valid in the country of origin.  The only exception being the EU where a device bought in any EU country can get warranty or service in any EU country.
    Warranty is determined by device (serial number), no documentation required.
    Apple does not repair devices, they replace them.  For that reason, ensure the device is backed up and any pictures take with the device are copied off the device prior to going in for service.

  • Issue with Audit Vault Collector for Peoplesoft-MS Sql Server

    Experts,
    Requesting your valuable inputs regarding below issue :
    Environment:
    - Peoplesoft with SQL Server 2008
    - Oracle Audit Vault.
    Current issue with Audit Vault collector for SQL server is that it is not giving PSFT login ID instead it is giving Peoplesoft DB service Account ID.
    Is this expected ?. If yes, what is the workaround ? Can Database Firewall is a best option to capture PSFT login ID ?
    Thanks

    Hi Rabi ,
      just do one think here ..
    During data source creation , in the Additional tab area , in the SQL Engine session , select "Vendor SQL"  instead of "Open SQL".
    HOw could u create data source without selecting the driver corrsponding to MS SQL.?
    it is recommended to download the latest Driver and use this for Driver creation.
    let me know ..
                                       Regards
                                       Kishor Gopinathan

  • Is there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly?

    Greetings everybody,
    I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
    I just launched a new website where I sell products with certain variations, for example please view this link: http://www.finerribbon.com/aegean-single-face-satin-ribbon.html
    On this particular product, the product variants are supposed to work in such a way where:
    If you select the value "1/8" from the "Choose Ribbon Width" field
    THEN
    The only options active and available to choose from in the "Choose Roll Size" field should be: 500 Yds, 20 Yds & Sample Swatch
    Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem where all the options are available regardless of the values chosen, basically the above functonality does not work.
    I was told that there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly, is this true? Can anyone advise me if there is a solution to this problem? I would sincerely apperciate it.
    Thank you very much for your time and help!

    Hi...
    I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
    Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem
    At the top of this window you'll see the following:
    Apple Support Communities > Mac OS & System Software > Safari > Discussions
    This the Safari forum for the Mac OS X.
    Better that you post your topic here  > Developer Forums: Apple Support Communities
    I do see on my iPad what you are rreferring to. But you shoudl get the feedback you need in the developer forum.

Maybe you are looking for

  • HD cam with FCP 5.1.4 ?

    Hi everybody, as I encounter big problems with my DV Canon XM1, I plan to buy a new one maybe HD cam. I saw that most of those cams have USB connection and no more FW, will I be able to capture an HD cam from FCP ? I doubt of it but can you tell me h

  • HT204350 how do i install '09 iwork to my Macbook air?

    How can I install my iWork '09 to my macbook air if it does not have a CD slot and I dont have an external CD drive?

  • Trying to understand the use of adjustment layers

    I think I am missing something here so thought I would bring it here for discussion. I am learning to do Adjustment Layers and when I do an adjustment layer of levels  and then another of  hue/saturation it has no way of confirming my choices.  If  t

  • Web Photo Gallery - Photoshop CS 8.0 (WinXP) -  Please help!!!

    Hello all, I'm using Photoshop CS 8.0 on WinXP, but when I load images for Web Photo Gallery, it shows the error as: "This is an error disbling controls for missing tokens. Some files or folders for selected style might be missing." I don't know what

  • I need help with Premiere Elements 8

    I have enough rams and storage space. I am working in windows XP; I finished a project with still pictures, music, home movie clips, and title menu. I got the program to burn the first copy. I need 19 more, but the program keep "crashing". I have res