Issue with scheduling a quarterly report in Central Management Console
Hi there,
I'm new to BusinessObjects and am a brand new member of the forum here and this is my maiden post and I'm hoping that the community here can help with an issue I have encountered. Basically we are using BusinessObjects Exterprice XI Release 2 and had a report schedule set-up to run Every N months Where N is 3, the start date was set as the 22:30 on 31/3/2009 and the report ran as scheduled on that date, however, the report didn't subsequently run at the end of Q2. I suspect it may be due to the date being set as the 31st March and that, ft is is to run every 3 months, that it tried to roll forward to 31st June which is obviously an invalid date. Has anyone seen this issue before and can you advise on the possible reason and a workaround/solution?
Thanks in advance...
Hope you have already got know on how to add new programs to CMC. (CMC->Folders->Manage->Add->Program file->Browse and select the program)
To replace...
If you are using SAP BO XI R3.x, you can use "Import wizard" or LCM for replacing \ overwriting the existing version of any objects (Programs, Crystal, webi reports etc..,) from one environment to another (Dev-QA, QA-UAT, UAT-Prod).
If you are using SAP BI 4.x, you can use Promotion Management which is integrated within the CMC to replace or overwrite the existing version of any objects from one environemnt to another.
To know more about using Import Wizard - http://scn.sap.com/docs/DOC-20523
To know more about LCM or Promotion Management - http://help.sap.com/businessobject/product_guides/boexir31/en/xi31_LCM_User_en.pdf
Note: If you are using LCM in R3.x or Promotion Management in BI 4.x, you can also utilize the "Version management" to manage your versions to keep track off.
Similar Messages
-
Hi,
I am in the process of installing Business Objects XI 3.1 in one of our server. While installing I am getting the error 'The Central Management Server has failed to start. Press 'retry' to attempt to start it again or 'cancel' to skip any actions dependendent on the Central Management Server. STW00213.'
I have tried re-installing the BO, and also tried installing without giving admin password. But it doesn't work. And also I ahve tried giving the passwords of database and CMS Admin without Sepcia Characters. But it also doesn't work.
If I cancel and install the BO, Server Intelligence Agent is not available in Central Management Server.
Could anyone help on this issue?
Thanks
PrakadeshHi Prakadesh,
Try these steps.
1. Stop and disable the service of current SIA. You can do it from start-->run services.msc. Double click the SIA service and change the status to disable.
2. Login into sqlplus and drop all the CMS tables.
3. Create a new SIA pointing to Oracle from the CCM.
4. Start the new SIA and check if all services come up and you are able to login into Manager servers.
If this does not work, check the event viewer for error messages.
Regards
Chinmaya -
Anti Virus with centralized management console
They do provide a 30 day free trial....
http://www.kaspersky.com/business-security/endpoint-selectGalaxy_Man wrote:
You can have a look at Kaspersky Business Select package; it comes with the Kaspersky Security Center for centralized management; we have been using it for a while now and so far it's worked well for us.There are so many type. which one are you using right now??
Kaspersky Endpoint Security for Business | Select
Kaspersky Security Center (including MDM)
Kaspersky Security Center (including MDM)
Kaspersky Endpoint Security for Windows
Kaspersky Endpoint Security for Linux
Kaspersky Endpoint Security for Mac
Kaspersky Anti-Virus for Linux File Server
Kaspersky Anti-Virus for Windows Servers Enterprise Edition -
How to load a new version in Central Management Console
HI I am new to Central Management Console and need to replace a program there with the new version.
i am not seeing how this is done.
i have gone there and located the current report. but i don't see where you replace it.Hope you have already got know on how to add new programs to CMC. (CMC->Folders->Manage->Add->Program file->Browse and select the program)
To replace...
If you are using SAP BO XI R3.x, you can use "Import wizard" or LCM for replacing \ overwriting the existing version of any objects (Programs, Crystal, webi reports etc..,) from one environment to another (Dev-QA, QA-UAT, UAT-Prod).
If you are using SAP BI 4.x, you can use Promotion Management which is integrated within the CMC to replace or overwrite the existing version of any objects from one environemnt to another.
To know more about using Import Wizard - http://scn.sap.com/docs/DOC-20523
To know more about LCM or Promotion Management - http://help.sap.com/businessobject/product_guides/boexir31/en/xi31_LCM_User_en.pdf
Note: If you are using LCM in R3.x or Promotion Management in BI 4.x, you can also utilize the "Version management" to manage your versions to keep track off. -
Cannot delete users from the Central Management Console
I cannot delete users from the Central Management Console. I'm logged in to Enterprise as administrator but still get the following error:
There was an error while writing data back to the server: Sorry, you do not have the right to 'Delete objects' (id - 22) for 'koberg' (id - 725415). Please contact your system or permissions administrator if you require this right.
Thanks in advance for any help on this matter.Oops, my mistake, sorry. Ok, so the Administrator cannot delete user koberg.
Check top level:
Logon to CMC, browse to Home > Settings and select the Rights tab. These are your top level settings. Factory default will show only Administrators and Everyone. Select the Net Access "Advanced" for the Administrators group. NB: Do not select these group names links - they will jump you out of the top level! On the Advanced rights page, ensure the right to "Delete objects" is explicitly granted.
Then set for the Users top level folder:
In the CMC, browse to Home, and select Users. Select the "Rights" button. Again - NB: Do not select these group names links - they will jump you out of the Users top level folder! Set the Administrators group to "Full Control". Save.
That should be all you need. However, there is a possibility the previous admin was busy setting security not only at the account level, but on groups so we need to verify the user:
In the CMC, browse to Home, and select Users. In the User list, select koberg. In the koberg account page, select the Rights tab. If the Administrators is not set to (Inherited Rights), make it so, and when you select the "Update" button, you should see the Net Access update to "Full Control". If this is the case, you should follow these steps on each account and accomplish this.
And if you still can't delete it, verify the groups:
In the CMC, browse to Home, and select Users. In the User list, select koberg. In the koberg account page, select the "Member of" tab. Note all groups koberg is a member of. Then in the CMC, browse to Home, and select Groups. Select the name hyperlink for the group(s) that koberg belongs to. On the group page, select the Rights tab, and ensure the Administrators have (Inherited Rights) - Full Control on all of these, also. If not, set it.
Finally, I know you inherited this, but let's overview some basics of simplifying your deployment administration. Follow these guidelines, and your administration life will be so much easier.
1. The Everyone group should never have any subgroups. Ever. All accounts on the system are a member of the Everyone group. Adding subgroups to the Everyone group is redundant.
2. For simplicity's sake, Application level access should be set on the Adminstrators Group, and the Everyone group. I know there are customers who add groups to application rights. I don't understand why users would have an account on the system if they are not allowed access to InfoView, but it's your system.
3. From a report object perspective, the Everyone group should be set at the top level to "No Access". This will result in them having no rights on anything at all. You break this inheritance at the application level to give them access to InfoView and other apps. On folders and objects, you ADD groups, then assign (ADD) rights as desired.
4. If you can help it, never explicitly deny a right to any user or group for any object or application. Explicitly deny overrides any other setting. If a user belongs to group A and group B, and group A is explicitly denied a right, you can explicitly grant it for group B or the user all day long, and it will still be denied. Always try to put yourself in the position of adding groups/users, and adding rights, then inheriting as far down the folder tree as you can. -
Not show anythings in tab License Key in Central Management Console
Dear All !
I have a DVD SAP Business Objects Edge Standard XI 3.1 include
BOE Standard XI 3.1 and Add on Sap_Integration, PeopleSoft_Integration, JDE_Integration and EBS_Integration
I have a temporary License Key Code which downloaded on Sap Market Place
the frist, i install BOE Standard XI 3.1 with a temporary key and when process finish, I login Central Management Console through web Tomcat below
http://<IP of server>:8080/CmcApp
I choose tab License Keys and I see a temporary license key
and then, I install Sap_Integration with a temporary key and when process finish, I login CMC through web Tomcat above, I choose tab License Key but not show anythings, just a blank page
And now, i want to upgrade with a permanent license but i can't because i don't see anything in tab License Key
pictures here
http://upnhanh.sieuthinhanh.com/userimages/images/sieuthiNHANH201001191803ody0nwrhzd45210_1.jpeg
thank for your advicereplace licensekeycode current with file original
-
Having an issue with running reports. We have created the folder under C:\Program Files\Cisco CRS Historical Reports\reports ..to resolve a bug but now the user gets the attached error message every morning. Any ideas?
Thanks,
JoeHi Joe
No attachment?
Aaron -
Issue with indicator values in report display
Hi All,
I am getting an issue with valutype #.
we have account restricted hirerarchy ,fiscal year period and Valuetype in rows .
I need to show the actuals indicator of value type 10 data in one row for each fiscal year period.But some of the key figures we are getting # data .valuetype indiator is repeating 2 times for each period.but we need to post this # values to 10.Any one have any idea how to handle this.
for example : my report is displaying like this
Account code : Fiscal Year period Value type Keyfig 1 keyfig2 Keyfig 3
CA1100 : 001.2006
10 100 22
200
002.2006
10 200 44
300
But I need the report like below
Account code : Fiscal Year period Value type Keyfig 1 keyfig2 Keyfig 3
CA1100 : 001.2006 10 200 100 22
002.2006 10 300 200 44Sirisha,
in the Query, You can filter your query to actual value i.e. 10. display KF1 and KF2 as it is coming from source. create restricted KF with restriction on account, fiscal year period and value type (= #).
you will get exact value. or while loading to cube or ods.. you can move that value to KF3 using start routine.
Nagesh Ganisetti. -
Install and config issues with Oracle Portal, Forms, Reports and Discoverer
For a while now I've been struggling with migrating a testing database to a newer version.
And right now I'm pretty much stuck at trying to configure Oracle Portal, Forms Reports and Discoverer
What I've got:
Windows server 2008 R2 64bit
Oracle 11g database
Java 6u27 64bit
JDK 1.6 64bit (using this after 1.7 ended up throwing out bugs while trying to start a weblogic server)
JDK 1.7 64bit
Weblogic 10.3.5 (or so i think - I've installed from the wls1035_generic.jar from the oracle website)
PFRD 11.1.1.2 with 11.1.1.3 installed over it, installed without config
and a hanging up configuration
Basically I've been trying to install PFRD (only forms, reports and enterprise manager from it actually) but it kept failing once it got to the configuration stage, so I installed without config, applied 11.1.1.3 and now trying to run the config manually with the good old \bin\config.bat
Result - the config froze for approx.18 hours then failed
There isn't much useful info I could deduct from the logs, mostly just says one or more configuration parts failed. At one place it mentions trying to set up a domain and starting up an adminserver for it - and apparently that's where it hangs up and finally times out and fails.
I'm a little clueless what to do about it as the logs don't say anything else of use I could understand. Any ideas there?Trying the step by step, the only difference between that and what i do seems to be the file copying (which I can't do - there is no windows\extra\ directory anywhere, the files mentionned seem to already be on their places and either only there, or exactly the same) and clistering
So far the news ain't good - the config process hangs on creating domain ->Step Creating Domain started
It isn't frozen per se - the process doesn't use up any processor time, memory consumption within bounds, it reacts to button clicks and all..it just doesn't do anything concerning the said domain
the last thing the .out file shows:
Creating a new AdminServer Object ...
AdminServer port is 7002
Starting the domain ...
LOADING DLL : E:\OracleDb\Middleware\develtools\install\config\\StartUtil64.dlland in the log:
[2011-09-08T11:57:03.456+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 14] [ecid: 0000J98U0KsFS8XLxuDCiW1EQ92r000005,0] Setting >valueOf(DOMAIN_PORT) to:7002. Value obtained from:USERit's the same it did last time, when after 18hours it woke up with .out saying:
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3173)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3033)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1644)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:634)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:390)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3143)
... 18 more
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:685)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:390)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 13 more
progress in calculate progress4
progress in calculate progress4
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:685)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:390)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 13 more
Going to execute executeAfterConfig
java.lang.IllegalStateException: Action:Application Configuration failed with error:Configure Classic Failed.
at oracle.as.install.engine.modules.configuration.client.ConfigAction.fail(ConfigAction.java:227)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:129)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
In Config Module Finish Event...and the log continuing with some variable setting notifications and this:
[2011-09-08T08:27:45.272+02:00] [as] [ERROR] [] [oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager] [tid: 14] [ecid: >0000J93lRQOFS8XLxuDCiW1EPpn_000005,0] One or More configurations failed. Exitingthen again more traces and notifications until the end marking config as failed
I'm kinda paranoid about the double backslash in the dll path, but other than that no clue as to why the domain doesn't set up
the other link you mentionned seems to have no relevance yet
does that clear up anything for you though?
..can the lack of SOA suite have anything to do with the problem? -
Issue with schema publishing after installing Universal Records Management
Installing URM over Content Server has been by far the most random experience I've had so far with any technology... Out of 6 installation attemts of URM, only 1 has been entirely successful.... with no errors.... the rest have errors that makes it impossible to work with the product... The funny thing is that the installation is nothing more than the installation of two components via Component Manager, with a few non-important options in the middle that have always been set to the same value...
First of all, in the installation guide of URM there are no mentions of required avaliable space in the Database Tablespace (idc_system) and in about half of our attempts (yes the other half didn't generate issues with this...) the 300Mb Tablespace filled up and caused the installation to pause until I added another datafile to that tablespace.
Secondly, the error that is a constant present in all failed installations is this one:
Unable to publish the schema. Unable to publish the view 'MediaTypes_View' with relationship 'ObjectTypes_MediaTypes'. Failed to append row. Mismatched number of columns in data result set [ Details ]
An error has occurred. The stack trace below shows more information.
!csSchemaUnableToPublish!csSchemaUnableToPublishView2,MediaTypes_View,ObjectTypes_MediaTypes!syFailedAppendRow
intradoc.common.ServiceException: ! csSchemaUnableToPublishView2,MediaTypes_View,ObjectTypes_MediaTypes
at intradoc.server.schema.StandardSchemaPublisher.publishViewRelationshipFragments(Unknown Source)
at intradoc.server.schema.StandardSchemaPublisher.publishViewValues(Unknown Source)
at intradoc.server.schema.StandardSchemaPublisher.doPublishing(Unknown Source)
at intradoc.server.schema.StandardSchemaPublisherThread.run(Unknown Source)
Caused by: java.lang.Error: !syFailedAppendRow
at intradoc.data.DataResultSet.addRow(Unknown Source)
at physicalcontentmanager.PhysicalContentManagerFilters.customizeMediaTypeSchema(PhysicalContentManagerFilters.java:688)
at physicalcontentmanager.PhysicalContentManagerFilters.doFilter(PhysicalContentManagerFilters.java:114)
at intradoc.shared.PluginFilters.filter(Unknown Source)
at intradoc.server.schema.StandardSchemaPublisher.publishViewRelationshipFragment(Unknown Source)
at intradoc.server.schema.StandardSchemaPublisher.processViewRelationshipPath(Unknown Source)
at intradoc.server.schema.StandardSchemaPublisher.publishViewRelationshipFragmentsForView(Unknown Source)
... 4 more
This error appears immediatly at the end of the server's first startup, just after all database changes are done upon installing URM. This last attempt I actually went to check the Content Server logs before I tried to login to the instance just to be sure that I wasn't responsible in any way for creating this error, and as I expected it was already there, since this relation is created by one of the Records components.... This error is a product of the URM installation itself and makes it impossible to run any Check-Ins or searches, due to the non-working relation causing Javascript errors which don't allow the forms to load values into any drop-down lists...
We also register every "move" we make during installations, and as we reviewed what we did we feel we did exactly the same steps (it's not that hard in a one-click installation process...), why only ONE of the installations went okay we're entirely clueless about.... What we do know is that we seriously need this issue fixed, not only is it costing us a ridiculous ammount of time in "attempts" but come on.. this issue shouldn't really exist in a public release... unless we're the only ones being affected by it?
On a side note, the URM installation was done over a "fresh" component-clean installation of Content Server, so there was nothing of our own custom components that could interact incorrectly with a component of the URM installation.
If anyone has seen this issue before, please write something here. Thanks in advance,
- Tiago Dias
Message was edited by:
user602700
Message was edited by:
user602700you should issue a support ticket yourself and get a SR number... that's probably faster than going through the sales guy.
I'd suggest turning on the "schema" trace section, make it verbose, and restart. You may need to disable all component (including URM) before doing this.
Something is wrong with the "MediaTypes_View" definition file, which is here somewhere:
contentserver/data/schema/views/
just not sure what... -
Issue with running a script in Oracle test manager
Tool - Open Script 9.0.1 , OTM
Hi All
I am facing issue while executing a open script with Oracle Test Manager , I have a script which was made with open script 9.0.1 and which is running very fine with the Open Script UI ,
problem occurs once I am trying to run this with OTM.Issue looks that playback was so fast in OTM so that script was not able to recognize some of the objects.
Is there anyway so that I can control the speed of playback at any particular step when I am using OTM
ThanksHi Kumar,
Regarding your query below is the suggestion:
You have to configure the job server with the repository. While configuring the adapter, you have to configure the job server in management console also..
Still if you are facing issue then please share Job Server logs available in BODS Job Server Folder and error screenshot to debug the issue.
Thanks,
Daya -
Not able to Log on to Central Management Console
Hello All
My Application was down, so I shutdown the servers and web Servlet container(tomcat).
Then i restarted the servers and web Servlet container.
I am still not able to log into CMC.
I am getting the login page, but when I try to login it says :
"The system servername can be contacted, but there is no Central Management Server running at port 6400."
When I ran the script for server start up,I got the message
Failed to register with name server. Reason: a server of this name already exists.
Please check for name duplication and validness of the server: ConnectionServer
Please help.
Thanks in advanceI hope you are working on a Unix server. If yes here is ur solution.
Check if under bobj/serverpids folder any listing is there. If yes then probably the BO are not stopped properly.
In that case u can kill the processes which are not stopped by using Kill -9 <pid>.
make sure that all processes that is BO services, tomcat services are stopped or the process are killed.
Once that is done restart the services and everything will be working fine.
Gud Luck!!!
Prashant -
Issues with scheduling job in sm36 for a standard report...
Hi,
After creating a variant for a program, if I try to execute SM36 -> Define step and then, I select ABAP program, the variant name associated with it. Now what do I need to do to schedule job for that report.Hi,
After giving the program and variant..
Press the start condition button..
Press Immediate to run immediately..
Or
Choose the date and time you want to run this job..
After that press save.
Then press save in sm36 for the job..THis will release the job...
Thanks,
Naren -
Email delievery Issues with scheduled advanced reports XLS and PDF format
Has anyone experienced problems with not recieving XLS, PDF formatted advanced reports via email?
Is anyone using the TAW/WEB-INF/web.xml parameter:
<context-param>
<param-name>scheduledReportUrl</param-name>
<param-value>http://reportservers.mydomain.com</param-value>
</context-param>
<context-param>
<param-name>reportServerUrl</param-name>
<param-value>http://reportservers.mydomain.com</param-value>
</context-param>
<context-param>
<param-name>isReportServer</param-name>
<param-value>true</param-value>
</context-param>Thanks for the reply Sebastian,
I created APS with only CVOM service and changed the parameter Xmx6g, but the result is the same. But there are some strange thing, since com at the time of shipment and PDF generation dedicated to the APS, the value of the metric "Maximum Memory (MB)" was 5.461Mg that corresponds to the parameter Xmx6g, but the metric "Total Memory (MB)" value was 1792Mg and "Free Memory (MB)" the 1.052Mg value. Is it possible that the APS does not use all available memory is allocated to it? At the time of generating the server had memory available to grow.
Tnks,
Calres -
Issue with Multiple Tables in Report
Post Author: dwessell
CA Forum: General
Hi,
I'm using Crystal Reports 2k8.
I'm doing a report with three tables, CQ_HEADER, SO_HEADER and SALESPERSON. Both the CQ_HEADER and the SO_HEADER tables link to the SALESPERSON table via a SPN_AUTO_KEY field.
However, I always receive duplicates in my result set, due to the joins made, and I don't receive results that are valid in one table, and empty in another (Such that it only counts a CQ, if there is a SO associated with it. Here's the query that's produced by CR.
SELECT "CQ_HEADER"."CQ_NUMBER", "CQ_HEADER"."ENTRY_DATE", "CQ_HEADER"."TOTAL_PRICE", "SALESPERSON"."SALESPERSON_NAME", "SO_HEADER"."ENTRY_DATE", "SO_HEADER"."TOTAL_PRICE"
FROM "CQ_HEADER" "CQ_HEADER" INNER JOIN ("SO_HEADER" "SO_HEADER" INNER JOIN "SALESPERSON" "SALESPERSON" ON "SO_HEADER"."SPN_AUTO_KEY"="SALESPERSON"."SPN_AUTO_KEY") ON "CQ_HEADER"."SPN_AUTO_KEY"="SALESPERSON"."SPN_AUTO_KEY"
WHERE ("CQ_HEADER"."ENTRY_DATE">={ts '2007-12-01 00:00:00'} AND "CQ_HEADER"."ENTRY_DATE"<{ts '2007-12-18 00:00:00'}) AND ("SO_HEADER"."ENTRY_DATE">={ts '2007-12-01 00:00:00'} AND "SO_HEADER"."ENTRY_DATE"<{ts '2007-12-18 00:00:00'})
ORDER BY "SALESPERSON"."SALESPERSON_NAME"
There is no link between the SO_HEADER and the CQ_HEADER. Can anyone make a suggestion as to how I could go about structuring this such that it doesn't return duplicate values?
Thanks
DavidHey,
I understand you used Retainsameconnection property true for all the OLEDB connections you used in the package if not make sure its for all the connection including file connection as well.
Additionally, you can try to set Delayvalidation property to true for all the dataflows and control flows in the connection and try running the package for 10MB file.
I hope this will fix the intermittent failure issue you are facing with SSIS.
(Please mark solved if I've answered your question, vote for it as helpful to help other user's find a solution quicker)
Thanks,
Atul Gaikwad.
Maybe you are looking for
-
Trouble converting pdf to word document with ocr
I just tried converting a pdf to a word document. I've done this successfully before. I checked the box indicating I wanted character recognition in English. The conversion I received was only a picture of the pdf file. No OCR. What's wrong?
-
Twitter iOS Notifications Badge broken
Has anyone figured out how to disable the Twitter icon notification badge on iOS 8 yet? Option not present in Settings.app...
-
Support of Farsi (Persian) keyboard/language on iOS devices!
Hello, I'm wondering when Apple is planning on supporting Farsi (Persian) characters on iOS devices? I am aware of Arabic keyboard that is available, but as you may or may not know, Farsi has 32 alphabet vs Arabic which has 28. Kind regards, -Shahin
-
How do you sync albums created in Photo on the iPad back tp iPhoto on Mac?
-
i have been trying forever 2 restore my ipad in itunes as its disabled due 2 unknown passcode. but when it goes 2 download software it says it cant communicate with ipad. please help