Issue with selection screen

Hi ,
I had a custom program. There i have one parameter and one select option. But when i try clicking on multiple selections it is giving me a message in the status bar saying 'Place the cursor on a selection'. And it doesn't opens up the window to enter multiple selections.
When i double clicked on the message i get the message no DB655.
What can be the possible error for this ??
Thanks & Regards,
Anuj Srivastava

Hi Anuj,
I tried with the same code in ECC6.0 but i am able to get the multiple selection window.How it is not working for you?Do you maintain any conditions inside the logic.
tables:USR02.
SELECTION-SCREEN BEGIN OF BLOCK 1 WITH FRAME TITLE text-h08.      "LC006++
PARAMETERS    : p_frggr LIKE ekko-frggr OBLIGATORY.
SELECT-OPTIONS: s_class FOR usr02-class NO INTERVALS OBLIGATORY.
SELECTION-SCREEN END OF BLOCK 1.                                  "LC006++
SELECTION-SCREEN SKIP 1.                                          "LC006++
SELECTION-SCREEN BEGIN OF BLOCK 2 WITH FRAME TITLE text-h09.       "LC006++
LC002++
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 40.
PARAMETER: p_config AS CHECKBOX.
SELECTION-SCREEN COMMENT 01(37) text-h05 FOR FIELD p_config.
SELECTION-SCREEN END OF LINE.
LC002++
LC006++
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 40.
PARAMETER: p_grptxt AS CHECKBOX.
SELECTION-SCREEN COMMENT 01(37) text-h07 FOR FIELD p_grptxt.
SELECTION-SCREEN END OF LINE.
LC006++
SELECTION-SCREEN END OF BLOCK 2.
Thanks.
Ramya.

Similar Messages

Performance Issue with Selection Screen Values

Hi,
I am facing a performance issue(seems like a performance issue ) in my project.
I have a query with some RKFs and sales area in filters (single value variable which is optional).
Query is by default restricted by current month.
The Cube on which the query operates has around 400,000 records for a month.
The Cube gets loaded every three hours
When I run the query with no filters I get the output within 10~15 secs.
The issue I am facing is that, when I enter a sales area in my selection screen the query gets stuck in the data selection step. In fact we are facing the same problem if we use one or two other characteristics in our selection screen
We have aggregates/indexes etc on our cube.
Has any one faced a similar situation?
Does any one have any comments on this ?
Your help will be appreciated. Thanks

Hi A R,
Goto RSRT--> Give ur query anme --> Execute =Debug
--> No a pop up ill come with many check boxes select "Display Aggregates found" option --> now give ur
selections in variable screen > first it will give the already existing aggregate names> continue> now after displaying all the aggregates it will display the list of objects realted to cube wise> try to copy these objects into notepad> again go with ur drill downs now u'll get the already existing aggregates for this drill down-> it will display the list of objects> copy them to notepad> now sort all the objects related to one cube by deleting duplicate objects in the note pad>goto that Infocube> context>maintain aggregates> create aggregate on the objects u copied into note pad.
now try to execyte the report... it should work properly with out delays for those selections.
I hope it helps you...
Regards,
Ramki.

Issue with selection screen element on At slection scree

Hi All,
I am facing an issue with a checkbox which is present within the subscreen of a standard selection screen.
The issue is that the value of the combobox get toggled by itselfon the event mentioned below. I am unable to find out how this combo box value gets changed by itself on the screen events.I tried clear statemetns etc nothing is helping. I debugged with a watch point on this screen element and found this to happen.It just changes the value of the element to a previously held state.I m trying to clear the combobox but this event puts back the tick mark.How can I stop this.
AT SELECTION-SCREEN ON COL_FROM. "COL_FROM is another screen element diffrent from the combobox
Thanks

Hi Vighneswaran CE,
This event corresponds to the PAI module of the COL_FROM field. So, it gets executed each time you press any valid function code on the screen (unless there was an error in a previous field). Nothing abnormal here.
That's difficult to help you on that topic, you'd better tell us exactly what report it is, where you have added your code (and what code) to change the checkbox, ...
Best regards,
Sandra

Issue with Select options in select statement - ABAP Question

Hi
I am facing an issue with select options. Select statement is returning sy-subrc as 4.
I wrote the program as below:
SELECT-OPTIONS:
s_kunnr FOR bsad-kunnr,
s_lifnr FOR bsak-lifnr,
s_gjahr FOR bsad-gjahr,
s_bukrs FOR bsad-bukrs,
s_saknr FOR bsad-saknr,
s_budat FOR bsak-budat.
In start of selection I have written the select statement as
SELECT * FROM bsak INTO TABLE lt_bsak
WHERE bukrs IN s_bukrs AND lifnr = s_lifnr AND gjahr IN s_gjahr AND budat IN s_budat AND saknr IN s_saknr.
In selection screen I have not entered any values and executed the program. I am not getting any result. When I debug that, sy-subrc is 4 at above select statement. But table has records.
If am removing the "lifnr = s_lifnr " condition in select then select is returning values.
I am not getting where I made the mistake. Please suggest.
Thank you
Hanu

Hi,
The problem here with where condition select option lifnr = s_lifnr.
Use below select query.
SELECT * FROM bsak INTO TABLE lt_bsak
WHERE bukrs IN s_bukrs
    AND lifnr     IN s_lifnr
    AND gjahr   IN s_gjahr
    AND budat IN s_budat
    AND saknr IN s_saknr.
s_lifnr is a select option and you are passing it as parameter lifnr = s_lifnr.
if you want to pass this s_lifnr as single vale then pass in below mentioned way.
lifnr = s_lifnr-low
BR,
Vijay

Issue with blank screen HP G60-447CL Notebook PC

Issue with blank screen HP G60-447CL Notebook PC, I purchased warranty and have had the laptop serviced before for the same exact issue. Same problem has come up again blank screen it has been less than five months this problem was fixed and it has started again: blank screen white, laptop is powered on nothing else happens. Now I cannot reach anyone.

You're very welcome.
I have tried many times to help folks with different drivers and nothing has worked.
I'd say at least a dozen people have posted about this issue, and no one can fix it.
I don't understand it either.

We run an iMac 3.4 GHz I7 for our church worship service; we haven't upgraded to Mavericks because we heard about issues with multiple screens crashing. Has this issue been resolved? Thank you!

We run an iMac 3.4 GHz I7 in our church worship service; we have front screens and a stage display monitor ; we haven't upgraded to Mavericks because we heard about issues with multiple screens crashing. Has this issue been resolved? Now that we are 2 upgrades behind, I'm getting little concerned. Thank you!

Oh, well that was a whole other kettle of fish:
Oh the G4 I attempted to install iLife '08 before Lepoard was available. About the only thing that installed cleanly was iPhoto. I ended up reinstalling everything back to iLife '06, and then upgrading back to the current stable version of the iLife '06 version. I didn't attempt a reinstall until after I upgraded to Leopard.
When I did reinstall, I made a iLife '06 folder, copied all iLife apps into it, and upgraded. Seemed to work, except for the part where iMovie gets left behind and iDVD is only mostly functional.
When I installed on the other 2 machines, it was after installing Leopard and all upgrades. On those 2 machines, I didn't bother with the copy, I just moved everything to the iLife '06 folder I created, and did a fresh install.
I didn't have to do anything with the iPhoto Libraries, that I can recall.
I always do an upgrade, never an archive and install. I've never had a problem with this back to 10.1 or 10.2.

Captivate 5.5 Question: We seem to be having an issue with the screen capture piece not recording "e

Captivate 5.5 Question: We seem to be having an issue with the screen capture piece not recording "everything".
We're running 5.5 as an administrator on Windows 7 and my co-worker is trying to capture a webinar (GoToMeeting) with Captivate and it is not recording anything in the GTM window, except the last slide. Anyone have this problem or know a fix? Not much is mentioned in the Adobe forums.

Captivate simply doesn't 'hear' some screen events on certain applications and you just need to resort to doing manual captures at these points.
I usually set up my manual capture button to be F2 so that I can hit it with my left hand while my right hand is on the mouse navigating through the task.

Submit program with selection screen parameters - getting blank values

Hi, I'm submitting a program with selection screen parameters. when I pass '000' (I_TPLSCN )value for Planning Scenario and when this goes to selection screen then I don't see value for Planning scenario as '000'(I_TPLSCN ) but the value is blank in selection screen. I'm using the below code for this.
SUBMIT RMCPAMRP WITH MATNR_GL EQ I_MATNR   SIGN 'I'
                  WITH WERKS_GL EQ I_WERKS   SIGN 'I'
                  WITH PLSCN    EQ I_TPLSCN SIGN 'I'
    via selection-screen        AND RETURN.
Could anyone please help me how to display value '000' rather than blanks.
thanks in advance.

If I_MATNR, I_TPLSCN and I_WERKS are variable then try with
SUBMIT rmcpamrp
WITH matnr_gl = i_matnr
WITH plscn    = i_tplscn
WITH werks_gl = i_werks
via selection-screen
   AND RETURN .
If I_MATNR, I_TPLSCN and I_WERKS are of type range then try with
SUBMIT rmcpamrp
WITH matnr_gl IN i_matnr
WITH plscn    IN i_tplscn
WITH werks_gl IN i_werks
via selection-screen
   AND RETURN
Edited by: Pawan Kesari on Dec 24, 2009 3:33 PM

Issu in selection screen tabstip

Dear all,
i have issue in selection screen tab control, i have 3 tab on screen when i execute the report using 3 tab and come back on selection screen then cursor default move on first tab, i want to stop control on my current tab.
thanks in advance ,
Abhilash

Hi ,
When we create the Tabs,we set one tab as default by passing the activetab attribute.
So when passing the control back to the tab,we need to set the tab in which user has previously done an action into the " activetab" attribute by either using the cursor properties or any other logic suited to the requirement.
Please Check the Program : DEMO_DYNPRO_TABSTRIP_LOCAL
Hope it Helps
Regards
Byju

Issues with selection tools using PS CS6

OK, I'm having issues with selections in Photoshop CC… This video shows my issue (which I never had with CS3). Basically, I go to select an area within an image, and then the selection area disappears, and when I go to move the selection area I am unable to get the selection to "drop". This happens regardless of whether I'm using my wacom tablet or my trackpad. My mac is a 2009 macbook pro running 10.8.5. Updated my OS and wacom tablet with the latest drivers. I've gone into preferences and disabled the GPU, but to not avail. Haven't run into this issue at work using CS6 (but i'm on a windows box there) Any ideas? Any help would be greatly appreciated ;-) http://www.youtube.com/watch?v=FGPla7V9QI8

say, SAKNR is 10 character field and ur appending only 6 characters, then it will give such type of errors normally.
before inserting the data to ur Z table use function module... CONVERSION_EXIT_ALPHA_INPUT

I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

I have a group of my images that rotate, and yes it happens oneach. I do believethat I have at one time had the images cover the entire screen, however I cannor remember how I made that happen, just like the desktop. I am sure it is old'ites setting in!

How to fill internal table with selection screen field.

Hi all,
i am new to sap . pls tell me how to fill internal table with selection screen field.

Hi,
Please see the example below:-
I have used both select-options and parameter on the selection-screen.
Understand the same.
* type declaration
TYPES: BEGIN OF t_matnr,
        matnr TYPE matnr,
       END OF t_matnr,
       BEGIN OF t_vbeln,
         vbeln TYPE vbeln,
       END OF t_vbeln.
* internal table declaration
DATA : it_mara TYPE STANDARD TABLE OF t_matnr,
       it_vbeln TYPE STANDARD TABLE OF t_vbeln.
* workarea declaration
DATA : wa_mara TYPE t_matnr,
       wa_vbeln TYPE t_vbeln.
* selection-screen field
SELECTION-SCREEN: BEGIN OF BLOCK b1.
PARAMETERS : p_matnr TYPE matnr.
SELECT-OPTIONS : s_vbeln FOR wa_vbeln-vbeln.
SELECTION-SCREEN: END OF BLOCK b1.
START-OF-SELECTION.
* I am adding parameter value to my internal table
wa_mara-matnr = p_matnr.
APPEND wa_mara TO it_mara.
* I am adding select-options value to an internal table
LOOP AT s_vbeln.
    wa_vbeln-vbeln = s_vbeln-low.
    APPEND wa_vbeln TO it_vbeln.
ENDLOOP.
Regards,
Ankur Parab

How to create tcode for modulepool program with selection screen?

hi,
How to create tcode for modulepool program with selection screen?
thanks,
sagar

Hi,
We need to goto SE80.
In our program we right click on object name and goto create
-> transaction. Enter the module pool program and screen number and save and activate.
Or by SE93 also we can create a transaction code for our program.
Hope ths helps.
plz reward if useful.
thanks,
dhanashri..
Edited by: Dhanashri Pawar on Jul 22, 2008 8:29 AM

Issue with selection paramter

Hi all,
I am developing a simple report.
For selection screen, i have defined as follows.
selection-screen: begin of block block1 with frame title text-001.
select-options: s_date for i_table-zdate obligatory.
parameters: p_projid like ztab1-projid obligatory.
selection-screen: end of block block1.
The SELECT statement as follows..
select empid name zdate projid actid hrs remarks into
corresponding fields of table i_table
from ztab1
where zdate in s_date
and projid eq p_projid.
Now while execution, i am facing few problems...
If i enter "444" in the selection screen for P_PROJID, the report will be blank, even thought the table is having values as "0000444".
In the database table, the corresponding field has been defined as follows...
projid cats_cproject_guid char 32
How to come out of this issue?
Please Help me.....
Regard
Pavan

Hi All,
I have coded as follows and facing few difficulties.
In the selection screen, i have to enter date and Project ID.
selection-screen: begin of block block1 with frame title text-001.
select-options: s_date for i_table-zdate.
parameters: p_projid like zpoc_time-projid obligatory.
selection-screen: end of block block1.
select empid name zdate projid actid hrs remarks into
corresponding fields of table i_table
from ztime
where zdate in s_date
and projid eq p_projid.
NO, if i enter '406' in the project ID field, the pgm will retrive the value with '406' only from table. If the entry is having value as '00000406', it will not be selected.
How to overcome this issue...????
Message was edited by:
Pavan Sanganal

Anyone have issues with "touch screen" not responding?

Does anyone find that the touch screen doesn't respond? I have huge issues with this style.
Touching and swiping on a screen that is 1.5 inches isn't fun. I need shade to read the screen (bad for snow), I need to go thru so much just to get to a song, a podcast, whatever that was playing before I HAD to turn off nana. I need to turn off nano each time.
1. Turn on by holding button like forever.
2. swipe, swipe, swipe, swipe to get to songs or podcast. Select, select, touch selcet, not selecting, touch, touch touch.
3. Select 'songs; selevet something else to get to a screen that says shuffle.
4. Select, select, touch, touch, use index finger, thumb, touch, breath on finger, touch again.
5. After one song plays after selecting "shuffle", it repeats, repeats,
6. Take ipod out of pocket, stand in shade, hit the snooze whatever button, to activate screen, Is screen activitated? yes? But it blinked off to quick to make selectioon of touch proof screen.
7. Walk inside to touch screen, to see screen. Hit button, wait for long time for this to start again (much like laptop starting).
8. Swipe to get to menu with songs, swipe, swipe, swipe swipe.
9. Select music: albums, artist songs. By selecting I mean touch touch touch, touch, use thumb, touch. for each selection
10. Are you sure this is an Apple product?
Can I return this POS and wait for someone to go back to what worked best??

Oh, and yes I have restored to factory settings. Then resynch.
I have done the soft reset or whatever it's called on this one.
It is updated.

Issue with selection screen

Similar Messages

Maybe you are looking for