Issue with Sender File FCC

Hi Experts,
I have an issue with Sender File FCC Adapter. The file being picked is of type TXT and it is tab seperated. The first line contains the field names and from next line onwards we have values for those fields.
The field names and field values are tab seperated. Even inserting a single letter in some field value manually disrupts the whole setup & alignment of the TXT file and the Sender File CC is unable to pick up the file from the shared folder. If the first file is errorenous and after that a correct TXT file is posted, it fails to pick up the correct file as it is trying to pick the errorenous file first.
The Error thrown is :
"Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 2 according to structure 'ABCD':java.lang.Exception: ERROR in configuration / structure 'ABCD.': More elements in file csv structure than field names specified!"
I have two questions:
1. Is there a way to handle such a scenario? For e.g., the errornous TXT file gets picked but throws error in PI.
2. Is there an alternative that the sender FCC channel picks up the correct files and filter out the errorneous ones ? ?
Thanks,
Arkesh

Hi Arkesh,
I think you are passing more number of fields than expected. Please check paramters defined and send the data accordingly.
In the processing parameters tab of sender file adapter, you have an option called Archive faulty source files, below to that you would have option to enter the " Directory for Archiving files with Errors".
I hope this helps you....
Thanks,

Similar Messages

Issue with Sender File Adapter

Hi,
In Sender File Adapter I have used content convertion. If the content convetion fails or the channel goes to error state, the sender file channel stops polling. The channel is not polling in the next interval once it goes to error state.
Please help.
Thanks
Aravind

Hi,
That's true.
If one file fails to process due error in content coversion or for any other reason, the channel would stop polling for the next time and also would not process the files following it.
Please correct the content conversion and process the file.
Regards,
Subbu

Issue with Sender File Adapter file content convertion

Hi Everybody,
I am facing an issue in FCC at the sender side.
Below is sender text message which contains 9 rows.Each row represents one node in the source structure.
ROUASIS.MLASIS.A02001COMASN1.1.2
HDR7072396166N^MAEU/SZH3PA288200707248IF07082007090311CAFXSYATFXS^20070903
PPL5705150010506YAT254915402713586045162543971730000002723.000C2750000000024.1602007081120070903^^
SIM3020070711^20070730Y^^^00
CONTTNU946652840CN0579566   7335
CTN100069350800012609166209.850.08068.5830.4838.10
DTL520^01
CTN200069350800012609173209.850.08068.5830.4838.10
DTL520^01
In the above message CTN row is repeating after each DTL because of which i am getting the error.
<b>Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR consistency check in recordset structure validation</b>
Can somebody help me out in resolving this issue.
Thanks in Advance,
Arvind

Hi Arvind
plas use the following parametes in the sender communication channel.
i have tried one scenario
my source structure is like that:
data (0..unbounded)
record (0..unbounded)
     key (1..1)
     fname (1..1)
     lname (1..1)
     age (1..1)
detail (0..unbounded)
    key (1..1)
    salary (1..1)
    empid (1..1)
so use the following parameters at the sender side
document name:                messge type name
document namespace:       ur message type namespace
Recordset name:               data(as per according to my source structure)
RecordsetStructure:           record,,detail,
recordsetsequence:           variable
recordsetpermessage:       *
keyfieldname:                   key
and different parameters:
RECORD.fieldSeparator     ,
RECORD.fieldNames         KEY,FNAME,LNAME,AGE
RECORD.keyFieldValue     1
DETAIL.fieldSeparator         ,
DETAIL.fieldNames             KEY,SALARY,EMPID
DETAIL.fieldNames             2
if you still have the problem pleas reply back.
Thanks
Rinku

Having issues with sending attachments via iMail to PC users

Having issues with sending attachments via iMail to PC users. Either they do not see all the attachments or the attachment comes across blank. Is there any suggested ways to resolve this?

You can also use Dropbox. 2GB free. Put files in the Public folder and you can send them links of the files instead.
You can use my referral link http://db.tt/MXNpy62 to create an account.

A serious issue with excel file read in ODI

hi gurus,
Issue with excel file read is that we can read only one file by setting the path from ODBC Data Source Administrator-->System DNS -->Select Work book
what i want to read the dynamic path(Every time I cant go back and set the Work book to select the excel file..
So i came up with a solution to write a Vbscript that convert the excel to csv my problem got solved for dynamic paths the script is as follow:
Set objArgs = WScript.Arguments
For I = 0 to objArgs.Count - 1
FullName = objArgs(I)
FileName = Left(objArgs(I), InstrRev(objArgs(I), ".") )
Set objExcel = CreateObject("Excel.application")
set objExcelBook = objExcel.Workbooks.Open(FullName)
objExcel.application.visible=false
objExcel.application.displayalerts=false
objExcelBook.SaveAs FileName & "csv",23
objExcel.Application.Quit
objExcel.Quit
Set objExcel = Nothing
set objExcelBook = Nothing
Next
Now this script convert the xls file to csv with comma seprated values
e.g in excel sheet if data is ABC XYZ PQR
csv will come with ABC,XYZ,PQR
here the delimiter is , i want the delimiter as pipe | who's ascii code is 124
but if i change 23 with 124 its not working i getting the error cannot save as...
can anyone tell me that what should be the correct code for pipe
so that the output is ABC|XYZ|PQR
AS WE CAN USE THE SCRIPTS IN TOOLS
Edited by: 789141 on Sep 14, 2010 11:33 PM

I dont have the answer for your question but i have different approach in handling multiple Excel File.
Step 1. Copy a sample source Excel File and Call it Final.xls .
Step 2. Map this Final.xls to DSN and in Topology call this Final.xls
Step 3. Do the Reversing and Map and test the Interface . Once its done.
Step 4. Create a Package and using a http://odiexperts.com/?p=1426 get the list of all the Excel File
Step 5 . Using this http://odiexperts.com/?p=273 create a Loop to Read the Excel File name
Step 6 . Copy using OdiFileCopy to Final.xls and run your interface .
Step 7. Increment the Loop and copy your next File for Final and run the interface
Step 8 . Finally you will be able to read all the Excel File .
Step 9 . Delete the source file [ Optional ]
Hope this helps.

Hi. I am having issues with copying files to my shared WB 2TB HDD connected to my airport extreme. Comes up with error 50. I am using a Macbook Pro to copy from so not sure what I am doing wrong. Can someone help? thanks Rory

Hi. I am having issues with copying files to my shared WB 2TB HDD connected to my airport extreme. Comes up with error 50. I am using a Macbook Pro to copy from so not sure what I am doing wrong. Can someone help? thanks Rory

These links might provide some information that may be of help.
http://support.apple.com/kb/TA20831
https://discussions.apple.com/message/2035035?messageID=2035035
I've encountered this error myself upon occasion. If I remember correctly, it was a permissions/ownership issue with the some of the files I was copying.

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I would first of all trash the preference file for InDesign, make sure the application is closed then find the prefs in
/Users/USER NAME/Library/Preferences/Adobe InDesign and just throw the entire folder away, it will generate a new one after you launch InDesign again.
Now launch InDesign and see if the problems are resolved.
If not I would repair your permissions on your hard drive wih disk utility, and if that fails then di-install InDesign and re-install that single application.
Let me know if any of these suggestions work for you
I will be checking my email although you might have to wait for a response as I will be taking a microlight flight over the Victoria Falls tomorrow. Yay can hardly wait.

Is there any way to send Attachements with Sender file adapter

Hi,
I am Using File to Proxy communication model. Is there any way I can use file attachments with Sender file adapter with communication protocol "FTP". Please on suggest this.
Regards,
Daniel.LA

Hi,
I think there is no Option with FTP Protocol to send the files as Attachments.
Try this
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
Regards
Seshagiri

Issue with attachment file name

Hi All,
This is about an issue with attachment file name:
we have a scenario wherein we have payload with attachments ...(attachments can be any doc ,pdf) , problem is main document is comming with messageid.sap.com and thats normal but attachments are comming with file names for example something.pdf or something.doc or something.txt ...this is failing in adapter as it expects same name as u have in main document...anybody have any idea to get through this issue...
Regards
kiran

we have a scenario wherein we have payload with attachments ...(attachments can be any doc ,pdf) , problem is main document is comming with messageid.sap.com and thats normal but attachments are comming with file names for example something.pdf or something.doc or something.txt ...this is failing in adapter as it expects same name as u have in main document...anybody have any idea to get through this issue...
- <SAP:Payload xlink:href="cid:payload-4CED452F17C601BDE10080000A492050---sap.com">
<SAP:Name>1 .Header1.txt</SAP:Name>
Error we are getting is
Cannot cast 'Header' to boolean] in class com.sap.aii.mappingtool.flib7.NodeFunctions method createIf[Header, com.sap.aii.mappingtool.tf7.rt.Context---27a73bfa]
So we have to change the File name Header1.txt to something which we can cast to creatif....(we cannot tell the sendr to change the file name as its is set already)
Thanks for interste and assisting
Regards
Kiran

Issue with corrupted file when dragging to timeline

Has anyone ever had an issue with a files audio becoming corrupted when moving the file from the editing window to the timeline. I am also seeing the my camtasia mp4 becomes blurry on the timeline but plays fine in the editing screen.
I had not problem with camtasia Mp4s previously and today I have had so many issues with premier pro

Hi,
Even i faced this issue before...the problem with file adapter is the attribute nxsd:quotedBy takes " as default even if u dont mention it takes the same and now after the quotes it immediately expects | wch is not there in the data and it throws the error...now the fix for the problem is put some symbol for nxsd:quotedBy wch u never expect in the data some thing like less than or greater than symbol ....some thing like below
<element name="FieldTwo" type="string" nxsd:style="terminated"
nxsd:terminatedBy="|" nxsd:quotedBy="<"/>

Issues with RAW files from my 7D

I have Aperture 1.5.6 on my computer and the software updater says that is the current version. I shoot with a 20D and a 7D. I upload my raw files to Aperture and edit them from there and then process for a jpeg. However, every time I upload a raw file from my 7D I get the following message when I click on it to edit it: Unsupported Image format.
Any words of advice, other than just buy Aperture 3??

I have Aperture 2.X and had zero issues with RAW files from a 7D, so I think the problem is you are on 1.X. Converting to DNG first was a good suggestion if you don't want to purchase 3.X. Yet another reason to hate proprietary raw image file formats.......

Sharpening issues with RAW files

Hi,
I have downloaded lightroom 5 as a one month trial and have been playing with the program. I am not an experienced user and are wondering if I am doing something wrong, have wrong settings applied or if it is the known sharpening bug that messes with my photos. I know that sharpening and noise reduction includes a bug that does not let you export pictures 1/3 of original size with sharpening/noise intact. However, in my case, this also happens with RAW files. I do not crop or change size/resolution to any of the photos, but the sharpening is still not working. Photos look great in develop mode, but when I click on library mode to export them, all sharpening disappears!
Is this the same bug previously reportered "only for pictures 1/3 of original size", or do I have some strange settings applied?
I was loving lightroom 5 up until I noticed this, and now I am reluctant to buy the product...
I'd be greatful if anyone has any input on this!
Thanks in advance

I have Aperture 2.X and had zero issues with RAW files from a 7D, so I think the problem is you are on 1.X. Converting to DNG first was a good suggestion if you don't want to purchase 3.X. Yet another reason to hate proprietary raw image file formats.......

Is anyone else having issues with sending / receiving messages since ios7 upgrade

Is anyone else having issues with sending / receiving messages since ios7 upgrade

I found this link, and am trying it right now to see if it helps.
http://forums.macrumors.com/showthread.php?t=1647944&highlight=ios7+imessage+tro uble

[Applet]Printing issue with pdf files on Xerox 4595

Greetings !!
I'm trying to print to a Xerox 4595 printer from a Windows XP station (limited account) using a Java Web Applet.
This applet generates pdf files which have to be printed.
The Xerox 4595 uses a printing queue that is detected by the Applet.
The problem is the following: usually when printing a simple local file from this computer there is a box that asks you your login to let you create a job and then print.
When using the Java Applet, there is no way to have this print box displayed. We have the Java Print Dialog but once clicked on "Print" there is no box displayed to pass the login to the printer and let us print.
Is anyone already worked with Xerox 4595 and experienced such issue ?
How can I, using the Java language and modify the Applet, ask the printer to send me the dialog box asking for the login ? Without this login no jobs are accepted and we can't print the generated pdf files.
I looked on the printer queue settings and it seems that the Xerox uses the IPP to communicate with the local computers in the office.
The server from which the Applet is used is a openSuSE Linux Web server (apache2)
How come using Linux workstations any pdf files are printed (on shared printers such HP laserjet) and under windows there is jammed characters and sheet feed instead ?

A lot can depend upon which app your are using on your tablet device, the same applies to computer programs but apps are much worse.
Which app are you using?
I would try the free Adobe Mobile Reader. This product seems to support more features than other apps.
There could even be issues with the type of tablet you are using. The Apple line may work better then Android devices since there is QA check and approval by Apple.
Another factor is the how the PDF was created.
How well are the maps displayed on your laptop or desktop? Try different values of zoom.

Sender File (FCC) - Content of File into single XML Tag

Hi,
Input file
This is Line1
This is Line2
Expected Sender File adapter FCC into XML
<Document>
.<File>
..<Content> This is line 1 This is line2</content>
.</File>
</Document>
FCC is giving the following output with the below config,
File.fieldNames = Content
File.fieldSeparator = '0x1A' (HexaDecimal rep for EndOfFile)
<Document>
.<File>
..<Content>This is line 1</content>
..<Content>This is line 2</content>
.</File>
</Document>
How can i read the complete file into a single XML tag?
I am aware of other options (AdapterModules or Javamapping). But i want to keep it simple to FileAdapter using FCC or using MessageTransformBean (if possible)
-SM

FCC donse't work here, So i wrote a simple Java map inside Execute method to convert the content to the required format.
public void execute(InputStream in, OutputStream out) throws StreamTransformationException{
StringBuilder sb = new StringBuilder();
       try {
       BufferedReader reader = new BufferedReader(new InputStreamReader(in, "UTF-8"));
       while ((line = reader.readLine()) != null) {
           sb.append(line).append("\r\n");
       } finally {
       in.close();
After i had the input string, i formatted it to get the required output as XML ...
<Document>
.<File>
..<Content> This is line 1 This is line2</content>
.</File>
</Document>

Issue with Sender File FCC

Similar Messages

Maybe you are looking for