Issue with sending message delay

Hi; Got an issue that has cropped up with Mail lately. Been on the phone all day with Apple Care. Every test on the planet hasn't found what's wrong. I would greatly appreciate knowing if anyone else has come across this issue.
Mail version 4.3 (1081) on a clean IMac OSX 10.6.4. All updates current as of today. ISP is RCN; all settings correct and no known issues with the RCN SMTP server according to them.
Issue is repeatable through all troubleshooting tests performed today. You name it; we did it :-))
Issue seems isolated to sending messages in Mail. Message can be composed normally, then when the send button is hit, I get a revolving wheel for between 30 and 45 seconds on the send folder, then the message clears normally and in the case of a test back to me, can be received normally.
What's strange is that I installed Thunderbird for the sole purpose of testing the send function there to isolate MAIL as the culprit and all messages instantly cleared in Thunderbird and received normally. This takes the RCN SMTP server out of the error equation as far as I can determine.
Anyone have any ideas on this issue. Apple has given up trying to find the problem.
Many thanks
Dudley Henriques

It is "Mail and Address Book" but it's a subset of 10.5
here...http://discussions.apple.com/forum.jspa?forumID=1338
edit: SL stands for snow leopard i.e. 10.6.x
Message was edited by: taylor.henderson

Similar Messages

  • Is anyone else having issues with sending / receiving messages since ios7 upgrade

    Is anyone else having issues with sending / receiving messages since ios7 upgrade

    I found this link, and am trying it right now to see if it helps.
    http://forums.macrumors.com/showthread.php?t=1647944&highlight=ios7+imessage+tro uble

  • Issue with Sender File FCC

    Hi Experts,
    I have an issue with Sender File FCC Adapter. The file being picked is of type TXT and it is tab seperated. The first line contains the field names and from next line onwards we have values for those fields.
    The field names and field values are tab seperated. Even inserting a single letter in some field value manually disrupts the whole setup & alignment of the TXT file and the Sender File CC is unable to pick up the file from the shared folder. If the first file is errorenous and after that a correct TXT file is posted, it fails to pick up the correct file as it is trying to pick the errorenous file first.
    The Error thrown is :
    "Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 2 according to structure 'ABCD':java.lang.Exception: ERROR in configuration / structure 'ABCD.': More elements in file csv structure than field names specified!"
    I have two questions:
    1. Is there a way to handle such a scenario? For e.g., the errornous TXT file gets picked but throws error in PI.
    2. Is there an alternative that the sender FCC channel picks up the correct files and filter out the errorneous ones ? ?
    Thanks,
    Arkesh

    Hi Arkesh,
    I think you are passing more number of fields than expected. Please check paramters defined and send the data accordingly.
    In the processing parameters tab of sender file adapter, you have an option called Archive faulty source files, below to that you would have option to enter the " Directory for Archiving files with Errors".
    I hope this helps you....
    Thanks,

  • Having issues with picture messaging get told to go to settings, then general, then network then cellular  data network. my problem is there is no such option my  phone is a 3gs

    having issues with MMS messaging instruction for setup,  are to gotto settings, then general, then network then cellular data network.My problem is there is no cellular data network optiion on this page have tried resetting phone , no good .Help.

    That option does not exist depending on who the carrier is.
    Who is the carrier?  Are they a supported carrier?
    Have you tried Settings > General > Reset > Reset Network Settings?

  • Having issues with sending attachments via iMail to PC users

    Having issues with sending attachments via iMail to PC users. Either they do not see all the attachments or the attachment comes across blank. Is there any suggested ways to resolve this?

    You can also use Dropbox. 2GB free. Put files in the Public folder and you can send them links of the files instead.
    You can use my referral link http://db.tt/MXNpy62 to create an account.

  • Issue with provided message for WSDL of SAP PI sender interface

    Hi,
    as I am not familar with SOAP interfaces and use of WSDL by partners with WSDL generated in SAP PI there are some issues that I have with a scenario:
    1. Import of external xsd for message is done
    2. Enterprise Repository and Integration Directory objects are completely created and activated
    3. WSDL was generated from ID Sender agreement (This is PI 7.1)
    4. Partner got the WSDL
    The partner provided now some test messages by mail that I would like to test in the mapping as the message is really complex.
    But the result is strange...
    1. The header of the partner message is this:
    <XJustiz_Daten xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
      <Grunddaten xmlns="http://www.xjustiz.de">
    (Some german words are in that example. But this doesn t matter!)
    This is different to the xml that PI generates in mapping:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:XJustiz_Daten xmlns:ns0="http://www.xjustiz.de">
       <ns0:Grunddaten>
          <ns0:Grunddaten XJustizVersion="">
    Partner defines xsi:   instead of ns0   and PI fails using this message!
    So I had to change the message header and add ns0: to all element tags and node tags of the message.
    (See for example with first node "Grunddaten").
    2. There are some mandatory nodes and elements.
    An example:
    - Rechtsform is mandatory node (1..1) with element content (mandatory 1..1)
    So it will appear in the payload like this:
                        <ns0:Rechtsform>
                                <ns0:content xmlns=""/>
                         </ns0:Rechtsform>
    But the partner provides this:
    <Rechtsform xsi:nil="true" />
    which is the next issue as PI doesn t understand as xsi is not mapped to a namespace. !
    It would be easy to use an "exist" function to solve the issue with the not provided element but this will not help
    when the node is provided with additinal information xsi:....
    Can you give any help/answer why PI is not able to handle such things.
    Thank you!
    Best regards
    Dirk

    Hello Meinhard,
    If you are the Service Owner, the sender system must use your wsdl message (WebService Definition).
    If there're other problems or the sender system can't use your message structure, in agreement with them you need to develope a different mapping.

  • Having issues with Sending Emails from Excahnge 2013

    hope you can help,
    I am learning Excahnge 2013 for the first time, and I have just build my first Excahnge 2013 server on a Windows 2012 server.
    I follow the steps from "petenetlive.com" on how to install the server and services. as this is a test bed server, I haven't gone as far as getting the Cert's.
    I have tried to different domain names from JCPPhotos.local 
    and jessphotos.co.uk but for some reason, I can't get the exchange to send out a test email, but I am able to send emails within exchange to internal email accounts with no issues.
    at the moment as this is a test bed, I have all the services on the same server, AD, Domain Contractor, DNS, but once I have this all sorted out then I will split the services onto different servers.
    I have at the moment disable all firewalls on the server, and opened all ports on my main firewall for all out going traffic.
    I have set up the send connecter as shown by Petenetive, and as the domain name is the same as my public domain name I have done anything else.   has anyone else had the same issues, and if so then can you please advice.

    I have check the Queue Viewer, and it looks like all the test emails are blocked, within exchange as it is showinNext
    Hop Domain = netsmart.org.uk
    Delivery Type = DNSConnectorDelivery
    Status = Retry
    Message Count 2
    Next Retry 04 March 2015  08:20:10
    Last Error 400.4.4.7
    here is the log file
    Identity: SVREXC01\13\8589934602
    Subject: TEST 1
    Internet Message ID: <[email protected]>
    From Address: [email protected]
    Status: Ready
    Size (KB): 4
    Message Source Name: SMTP:Default SVREXC01
    Source IP: 172.16.1.13
    SCL: -1
    Date Received: 03/03/2015 14:07:40
    Expiration Time: 05/03/2015 14:07:40
    Last Error: 400 4.4.7 Message delayed
    Queue ID: SVREXC01\13
    Recipients:  [email protected];2;2;[{LRT=};{LED=400 4.4.7 Message delayed};{FQDN=};{IP=}];0;CN=Send-Connector,CN=Connections,CN=Exchange Routing Group (DWBGZMFD01QNBJR),CN=Routing Groups,CN=Exchange
    Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=JessPhotos,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=jessphotos,DC=co,DC=uk;0
    with Telnet, I tried to open a connection by        open *.*.*.* 25
    I type a Nslookup command, but I got a error message   = 500 5.3.3 Unrecognized command
    I then tried to use the Telnet a test email with this and I got a error at each command line    500 5.3.3 Unrecognized command
    Destination SMTP server   mail1.netsmart.org.uk  =  "this was a guest as this is a hosted domain"
    Source domain   jessphotos.co.uk
    Sender's e-mail address  
    [email protected]
    Recipient's e-mail address   [email protected]
    Message subject   Test from JessPhotos
    Message body   This is a test message
    with the EXRCA outbound
    I enter in the details,      outbound IP Address = Default gate "I was guesting on this"
    for the email address I enter in my local
    [email protected], and click Perform test, and I got a error, saying that it didn't like the IP Address
    I also tried the IP Address of the Exchange server,  which again didn't work
    any ideals ?

  • Issue with PI messages in "To be Delivered" Status

    Hello Experts,
    We have a Mail to SOAP scenario on PO 7.4 single stack PI system. Currently we are facing issue with messages where messagess are in status "To be Delivered". Messages dont get processed further.
    Two days back, we had issue with file system table overflow and this cause messages remained in "Delivering" status. I can see Audit log with error emssage for table space full.
    I couldnt cancel/resend those messages.
    I believed these messages are causing rest of the messages to go in "To be Delivered" status. I found few blogs to check resources in Java Engine Additional Data->Queues and its looks good.
    we had system restart and these "Delivering" messages were cancelled but again when we tried a fresh run and first message went into "Delivering" Status with 500 server error message in audit log and subsequent messages started going into "To be Delivered" status. This is happening only for one scenario, rest of the message are working fine.
    I tried wit new BS, Channel, Integrated scenario for same functioanlity but its not working.
    Recent messages with "To be Delivered" can be seen with below audit log
    Information MP: processing local module localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean
    Information Mail: Calling the module processor for channel CC_Sender_V2
    Information Mail: Message leaving the adapter (call)
    Information Trying to put the message into the send queue
    Information Application attempting to send an XI message asynchronously using connection AFW
    Information Message successfully put into the queue
    Information Trying to put the message into the send queue
    Information Mail: Call completed
    Information Message successfully put into the queue
    Information The application sent the message asynchronously using connection AFW. Returning to application
    Information Mail: Call returned for channel CC_Sender_V2
    we have latest patch(SAP_XIESR Version 1000.1.70) applied 10 days back only
    Kindly suggest.

    Hi All,
    Thanks for your reply and suggestions.
    Now messages are flowing properly. Issue was with data population in the target structure. Receiver side we have Knowledge Management portal website and CreateDocument operation fields were expecting some values to be populated. We tried few combinations and it worked.
    We also tried changing mapping and we could reproduce messages with "To be delivered" status.
    Now we are searching for KM Portal Webservice documentation where information about every field of operation is mentioned. If we straight away pass source mailbody to webservice, its not working. failing at webservice end with error 500 internal server error. It expects data to be in Base64 format and also fields like Length of data to be populated. If we get documentation then things would be more easy. We are also passing attachment but its not getting generated at target end. We are not sure if webservice support that feature.
    Thanks,
    Vinit.

  • TS3899 Intermittent issue with sending emails from a blueyonder.co.uk email address.

    Hi can anyone help?  My iphone 4 has recently developed an intermittent issue sending emails from my 'blueyonder.co.uk email account.  The emails get delivered to my outbox with a message 'cannot send mail, recipient was rejected by the server'  When the emails are in my outbox there is no means to delete them there the only way to remove them is to remove the full email account and reset it up again.
    I have tested the send functionality with my Gmail account and this seems to work ok!
    I have spoken to Virgin Media my email provider and they have walked me through removing the account and resetting it up again but to no avail.  They have suggested I contact Apple as there appears to be something wrong with the email application on my phone for this particular email account. 
    All incoming emails are being received as normal

    Hi can anyone help?  My iphone 4 has recently developed an intermittent issue sending emails from my 'blueyonder.co.uk email account.  The emails get delivered to my outbox with a message 'cannot send mail, recipient was rejected by the server'  When the emails are in my outbox there is no means to delete them there the only way to remove them is to remove the full email account and reset it up again.
    I have tested the send functionality with my Gmail account and this seems to work ok!
    I have spoken to Virgin Media my email provider and they have walked me through removing the account and resetting it up again but to no avail.  They have suggested I contact Apple as there appears to be something wrong with the email application on my phone for this particular email account. 
    All incoming emails are being received as normal

  • Cannot receive email. No issues with sending. Settings not changed. Help?

    Nothing has changed with my email settings and I can successfully log in through webmail. I can send messages through Thunderbird but cannot receive anything. My account is not over its allotted size, so it isn't a space issue. Please help.

    Maybe you need to change something to match a change your provider made.
    Successfully logging into your account on the webmail page just confirms that you know your username and password. The webmail and POP or IMAP servers are two completely different things.
    Do you get any kind of error message?
    Get a current list of server settings from your provider and compare those with what you have in Thunderbird to see if you need to change anything.

  • Moving mail users to IMAP from POP. Issues with sent messages disappearing

    Our mail server has been working well for several years, running currently on Mac OX 10.4.10 (Xserve G5). All user accounts have always been setup for pop and imap in WGM but we have just recently started to move client settings to IMAP. No changes to the mail settings in server admin except opening the firewall to include port 993 for imap ssl.
    The issue is that all users appear to loose the sent mail records when using the apple mail apps. After a message has been sent, the message record stays in the Apple generated sent box for that account and then disappears (presumably after syncing with the server).
    The mail app "account" settings shows that sent messages are to be stored on the server and never to be deleted (in mailbox behavior).
    If you do a "get info" on the mailbox,sent messages don't show on the server either under "Sent". I also created an additional mailbox "Sent Messages" to be used as sent mailbox location. mailbox shows up on the server, but no mail is added when sent from the apple mail app.
    Now, I would have assumed this to be an issue of the client app, but the behavior is consistent across several machines and also on new mail app configurations.
    When using Entourage with the same account however, the server works as anticipated and all sent messages are stored on the server (in the "Sent Messages" box). Any Entourage sent messages also show up in the "Sent Messages"mail box of the apple mail apps.
    When using iphones, the behavior is somewhat unclear. The iphone mail settings (under advanced) show the "server" selected ("Sent Messages") for sent mail, yet the actual iphone mail app lists that folder as just "Sent". When sending messages, that mailbox shows the Entourage sent messages and iphone sent messages, but the iphone messages never appear on the server.
    This only happens on sent messages; inbox, drafts, deleted and junk mail boxes work perfect. This also happen on any imap client account I setup, not just a specific one.
    Any suggestions? Any setting I am overlooking? Using Entourage for all users is not an option...
    Thanks for any help...

    Please see my post and how it was resolved:
    http://discussions.apple.com/thread.jspa?threadID=1181356&tstart=0
    When I had that issue, I tried using Apple Mail app and noticed that Sent Mails are getting lost. Try sending an email using WebMail. You might see similar "Permission Denied" error. Try restarting the server and see if the issue still exists.

  • Issues with sending mail when using 2 email accounts - possible bug?

    Hi all,
    Having issues with trying to send email from the 3g iPhone. I have 2 IMAP acounts set up on the phone, one
    which works fine but when I try to create mail from the primary account as soon as I hit send it exits the mail program and goes back to the home screen.
    Both IMAP accounts have identical settings apart from the username and email address. On the primary account there is no sent messages folder on the iPhone whilst there is on the account that works. I've had a look in the advanced settings and it is programmed to store sent messages in the local sent folder which doesn't exist. I've tried selecting it to store in a IMAP folder as I thought maybe it was crashing as the local folder wasn't there but it has the same result.
    Have deleted the account and entered the settings back in again to try to coax it to create the local sent folder but cake up with the same problem.
    Suggestions are welcome.

    You have their SMTP servers mixed up, go to Mail>Preferences>Accounts>Outgoing Mail Server (SMTP), click on the server then choose Edit SMTP Servers and select the correct one for each account. Then check the Use Only This Server box

  • Conntrans error with SENDING messages

    Hello everybody.
    Still using a CRM 4.0 SR01 SP08 build, this time I am facing a Conntrans error : sending messages keep failing, while the reception process is OK.
    If I select "SEND & RECEIVE", the SEND status becomes orange, RECEIVE is blue (OK) and I get in the summary the error related to the failure. Synchronizing another time gives the same result. When I close Conntrans, I get a "GUI MFC Error" crash popup.
    If I select "SEND only", the SEND status stays gray and I get the error related to the failure. When synchronizing again, I get a "GUI MFC Error" crash popup while in the background the SEND status becomes orange, with the error related in the summary.
    What we have tried so far is :
    - deleting the 1st message from outbound queue (table = MW_Q_OUT, where MSG_ORDER = 1 ), gave no result
    - testing connections to Comm Station : connection is OK
    - launching the Check Environment from the Client Console : it reports that ADO version seems to be less than 2.5, and the registry setup is not complete (it misses HKLMsoftwaresapmtsoptions) but as all was working before, I don't think it is very important.
    Here follow the data from the logs :
    c:TempDotNetQmtClient.log
    22/02/2007 09:48:50 : PushFirstTime ('CRM_SITE_000000000000503', '', '0', 3)
    22/02/2007 09:48:50 : GetMessageCountToSend : Found 50 message to send.
    22/02/2007 09:48:50 : Updating pending confirmation table for queue CRM_SITE_000000000000503
    22/02/2007 09:48:50 : TransferPushMessages (2, 20)
    22/02/2007 09:48:50 : Total messages read from the out queue : 20
    22/02/2007 09:48:50 : Sending data to the server without compression.
    22/02/2007 09:48:50 : Sending messages to server :  Single_Send
    Error In TransferPushMessage() : Type is not resolved for member System.Data.SerializationFormat, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089.
    22/02/2007 09:48:57 : PullFirstTime (CRM_SITE_000000000000503, )
    22/02/2007 09:48:57 : ConfirmMessageRecvd ()
    22/02/2007 09:48:57 : LastReceived MsgOrder = 0
    22/02/2007 09:48:57 : TransferPullMessage (20, 0)
    22/02/2007 09:48:57 : PullMessage LastTID : 0AF90185-0998-0059-45DC4AA3
    22/02/2007 09:48:57 : Next Pull: msg_count = <20> msg_size = <0>
    22/02/2007 09:48:57 : TransferPullMessage : ActualPullMsg = <0> ActualSizeRcvd = <0>  MsgOnServer = <0>
    22/02/2007 09:48:57 : Calling Confirm Messages after Recv end !!
    22/02/2007 09:48:57 : Confirming unprocessed messages to server
    22/02/2007 09:48:57 : ConfirmMessageRecvd ()
    22/02/2007 09:48:57 : LastReceived MsgOrder = 0
    22/02/2007 09:48:57 : GetReceiveStatistics (...)
    22/02/2007 09:48:57 : GetSendStatistics (...)
    22/02/2007 09:48:57 : Finish (0, 0, 296, 62, 0)
    22/02/2007 09:48:57 : Finally ()
    C:Documents and Settings feugierLocal SettingsTempTransferService.log
    868        828                               ! Entering PreConnect
    868        828                               ! Entering BeforeTransfer
    868        828      Thu Feb 22 09:48:50 2007 ! Initialization for Site 'AE08F6F235D1C84BA36C73DE2CA25F54' succeeded, Server version info: - unknown -
    868        828                               ! Leaving BeforeTransfer with 'OK'
    868        828                               ! Entering Transfer
    868        828                               ! Entering PushTransfer
    868        828                               ! Entering 'PushMessages' for queue 'CRM_SITE_000000000000503' / limit 20 messages
    868        828                               ! First time: Messages found to send in Outbound Queue: 50 (125 msecs)
    868        828      Thu Feb 22 09:48:57 2007 E
      ERROR in TransferService - Send: 'Send' call to Communication Station/CRM Server
    failed with fffffffb:
    (null)
    868        828                               E
      NO ERROR POPUP DISPLAYED !!!
    868        828                               E
      _TransferPushMessages failed with fffffffb
    868        828                               E
      Process modules loaded:
    108 modules found in process:
    Location  Module name                                                                                File version     Prog.version   File size  File date/time
    00400000  C:Program FilesSAPMobilebinConnTrans.exe                                                                                1,210,863,0      1,210,863,0      376895  17.11.2004  18:07
    011a0000  C:Program FilesCommon FilesSystemadomsado15.dll                                                                                2.80.1022.0 (srv03_rtm.030324-2048)      2.80.1022.0      565248  25. 3.2003  12:00
    01230000  C:Program FilesCommon FilesSystemOle DBMSDASQLR.DLL                                                                                2.80.1022.0 (srv03_rtm.030324-2048)      2.80.1022.0       16384  25. 3.2003  12:00
    01ed0000  C:Program FilesCommon FilesSystemOle DBoledb32.dll                                                                                2.80.1022.0 (srv03_rtm.030324-2048)      2.80.1022.0      512000  25. 3.2003  12:00
    01f50000  C:Program FilesCommon FilesSystemOle DBOLEDB32R.DLL                                                                                2.80.1022.0 (srv03_rtm.030324-2048)      2.80.1022.0       69632  25. 3.2003  12:00
    01f70000  C:Program FilesCommon FilesSystemOle DBmsdasql.dll                    
    {...}  follow the list of what I think to be all the stuff loaded at that moment...
    If anyone has a clue, a hint, a solution...
    Thanks and Regards,
    François

    If you require Framework 2.0, upgrade to SP07. In this support package conntrans becomes compatible with 2.0.
    EDIT: Sorry you are using 4.0, I meant SP07 for 5.0
    Message was edited by:
            João Sousa

  • Issue with Sender Mail Adapter Configuration

    Hi All,
    We are PI 7.1.1 version. We are unable to see the following parameters in the sender Mail adapter:-
    Default XI Parameters : Default Interface Namespace and Default Interface Name.
    Also, we are geeting a Nullpoinetr exeception in RWB.
    Kindly provide your suggestions.
    Thanks & Regards,
    Navneeth K.

    Hi.
    I have faced the sane problem. My solution is to use DynamicConfigurationBean module:
    AF_Modules/DynamicConfigurationBean     Local Enterprise Bean
    with
    parameters:
    message.interface=<Your Interface Name>
    and
    message.interfaceNamespac=<Your Interface Namespace>
    Note that last parameter name is not interfaceNamespace but interfaceNamespac .
    It would be great if anyone will explane were Default XI parameters gone and how we can get them back.

  • Issue with Sender Side JDBC processing

    Hello,
    I am facing some problem with Sender Side JDBC Processing.
    I am polling the DB MY SQL Server 2000 and using some SELECT statement i picked up some data and updated the DB with an UPDATE statement. At the receiver side i am using RFC adapter which takes the data from the DB and process further to SAP system.
    At sender side , i can see that the DB has been updated but in Integration Engine / Adapter Engine i could see any message related to that. So now my question is where did the message go.
    Can you please provide the inputs.
    THanks,
    Soorya

    Hi Surya,
    as u mentioned that u r unable to see ur message in IE & Adapter enigne
    pls do chk with the DB connections with XI and make sure that u choose every thing under same name space
    pls try to refersh cache
    thanx
    Sampath

Maybe you are looking for