Issue with set up of 2 new iPads on 4G

Just purchased 2 new 4G ipads, during setup of 4G set mine up with my wifes name, email and cell phone as account info. Thought i could set up both to this account. after finding out it just moved the account, I then moved it back to mine and set hers up with using my info including cell number in the 4G account set up.. Issue is now txts from her to me show up as coming from me, same if i send one to her it shows up and she has sent... This carries over to iphones also as it looks the same there two even though no changes to them. The question is what is the easiest way to get these two iPads switched now? would moving the contract on mine to her and hers to mine work or do i have to do back ups and resture to the other machine, etc.??

Knowing the way Apple works you will probably have to delete and create a new account for one of the two

Similar Messages

HT4436 IPAD issue. Set up Icloud on new IPAD which works fine on my mac and phone. HOwever, when going to iCloud on that IPAD, I am sent to the welcome/set up Icloud screen. And icloud is already set up. How do I get the ipad to recognize the Icloud setup

? IPAD/iCloud set up issue. HAVE iCloud working fine on iPhone and mac. New iPad. Set up iCloud through the usual utility. However, when signing on the iCloud I get sent to the initial "Set up iCloud" screen and cannot sign in to my iCloud account - on the iPad only. Works fine on any other device.
Why? Anyone know what I might have done wrong?
Otis

You can't go to icloud.com on an iOS device like your iPad. You can only view your data on icloud.com from a computer. This is because you can already view all your iCloud data on your iOS device from within your apps (contacts in the contacts app, calendars in the calendar app, email in the mail app, etc.).

I am using apple configerator. I am unable to prepare or supervise 1 ipad. After preparing, I get an error that says "refresh completed but with an error, unable to verify supervision state" . I have erased all content and set up as a new ipad.

I am using apple configerator. I am unable to prepare or supervise 1 ipad. After preparing, I get an error that says "refresh completed but with an error, unable to verify supervision state" . I have erased all content and set up as a new ipad and tried again with no success. Any help would be appreciated

Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

HT4623 Help updated my ipad with IOS 7.0.4. It asks me what language, chooses my wi-fi and then asks.........1 - set up as a new ipad, 2 - restore from iclouds or 3 - restore from itunes but won't restore as not enough memory! What do I do now?

Help updated my ipad with IOS 7.0.4. It asks me what language, chooses my wi-fi and then asks.........1 - set up as a new ipad, 2 - restore from iclouds or 3 - restore from itunes but won't restore as not enough memory! What do I do now?
I don't want to lose all my pics, songs etc
Whats my next move as I CANNOT use the ipas at the moment!!!!!!!!

Your iPhone's iOS must be same or newer than the one in backups. In your case it is older so you need to update your iPhone and then recover it with backup.

Issue with setting ratings and labels

Greetings all. I am having an issue with setting ratings AND labels on image files at the same time. If the script sets the label first then the rating, the label doesn't show in Bridge. If the script sets the rating first then the label, the rating doesn't show in Bridge.
Is there a workaround for this? Here is my script function for doing this. file=filename minus extension. Rating is a number for the desired rating. lab is a number for the level of Label I wish to set. Everything works great except that I can't set both Rating and Label with the script as shown. In this instance, only the Ratings will show up in Bridge after running the script. If I move the x.label=Label line under the x.rating=Rating line, then the ratings only show for those images with no label (lab=0). Any image that gets a label receives no rating.
If you're going to test this, you may want to comment out the Collections part. That's the part within the "switch(Number(Rating))" block.
function setRating(file,Rating,lab) {
    try{
        cr=File(file+"CR2");
        psd=File(file+"psd");
        jpg=File(file+"jpg");
        tif=File(file+"tif");
        switch(lab) {
            case 0: Label = ""; break;
            case 1: Label = "Select"; break;
            case 2: Label = "Second"; break;
            case 3: Label = "Approved"; break;
        if (cr.created) {
            var c=new Thumbnail(cr);
            c.label=Label;
            c.rating=Rating;
            if (psd.created) {
                p=new Thumbnail(psd);
                p.label=Label;
                p.rating=Rating;
                if (jpg.created) {
                    var j=new Thumbnail(jpg);
                    j.label=Label;
                    j.rating=Rating;
                    Rating=0;
                else addFile=psd;
            else addFile=cr;
        switch(Number(Rating)){
            case 0 : break; /* No Rating */
            case 1 : if(!app.isCollectionMember(OneStar,new Thumbnail(addFile))) app.addCollectionMember(OneStar,new Thumbnail(addFile)); break;
            case 2 : if(!app.isCollectionMember(TwoStars,new Thumbnail(addFile))) app.addCollectionMember(TwoStars,new Thumbnail(addFile)); break;
            case 3 : if(!app.isCollectionMember(ThreeStars,new Thumbnail(addFile))) app.addCollectionMember(ThreeStars,new Thumbnail(addFile)); break;
            case 4 : if(!app.isCollectionMember(FourStars,new Thumbnail(addFile))) app.addCollectionMember(FourStars,new Thumbnail(addFile)); break;
            case 5 : if(!app.isCollectionMember(FiveStars,new Thumbnail(addFile))) app.addCollectionMember(FiveStars,new Thumbnail(addFile)); break;
            default : break;
    }catch(e){
          alert(e);
          return -1;

Afew errors to start with, you were not creating a proper file as there wasn't a fullstop in the filename.
If a CR2 file didn't exist no other file was looked for, you were using "created" and should have been "exists"
This now labels and rates....
setRating("/C/Test Area/NEF/z",2,1);
function setRating(file,Rating,lab) {
    try{
        cr=File(file+".CR2");
        psd=File(file+".psd");
        jpg=File(file+".jpg");
        tif=File(file+".tif");
        switch(Number(lab)) {
            case 0: Label = ""; break;
            case 1: Label = "Select"; break;
            case 2: Label = "Second"; break;
            case 3: Label = "Approved"; break;
        if (cr.exists) {
            var c=new Thumbnail(cr);
            c.label=Label;
            c.rating=Rating;
            if (psd.exists) {
                p=new Thumbnail(psd);
                p.label=Label;
                p.rating=Rating;
                if (jpg.exists) {
                    var j=new Thumbnail(jpg);
                    j.label=Label;
                    j.rating=Rating;
                    Rating=0;
        switch(Number(Rating)){
            case 0 : break;
            case 1 : if(!app.isCollectionMember(OneStar,new Thumbnail(addFile))) app.addCollectionMember(OneStar,new Thumbnail(addFile)); break;
            case 2 : if(!app.isCollectionMember(TwoStars,new Thumbnail(addFile))) app.addCollectionMember(TwoStars,new Thumbnail(addFile)); break;
            case 3 : if(!app.isCollectionMember(ThreeStars,new Thumbnail(addFile))) app.addCollectionMember(ThreeStars,new Thumbnail(addFile)); break;
            case 4 : if(!app.isCollectionMember(FourStars,new Thumbnail(addFile))) app.addCollectionMember(FourStars,new Thumbnail(addFile)); break;
            case 5 : if(!app.isCollectionMember(FiveStars,new Thumbnail(addFile))) app.addCollectionMember(FiveStars,new Thumbnail(addFile)); break;
            default : break;
    }catch(e){
          alert(e);
          return -1;

I bought a used iPad, restored it and set it up as "new iPad" it worked perfectly, this morning when I turned on, it asked to be activated, I entered my iTon account and password several time correctly, i got massages hat "your iPad could not be activated

I bought a used iPad, restored it and set it up as "new iPad" it worked perfectly, this morning when I turned on, it asked to be activated, I entered my iTon account and password several time correctly, i got massages hat "your iPad could not be activated because activation server is unavailable. Try to connect your iPad to iToo o activate" connected to iToon, it does not recognize my iPad and keeps giving the name of the of my wife's iPad and I cannot do anything even restore the Pad again because it asked to turn of the find "my iPad" off that I cannot do because I cannot get pass activation. can you help me?

Hi Kambizkaren,
Thanks for visiting Apple Support Communities.
If your iPad can't be activated, the steps in this article can help:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Best,
Jeremy

Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!

Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!

I'd take it into my local APple store and have them look at it. There may be something wrong inside your device.

Issue with Generate Create Script in new ODT 11.1.0.6.10 beta

I've tried this on several tables in my database. I choose Generate Script to ... a file, for a given table it gives me the error message "An error occurred while writing to fil: \nValue was either too large or too smal for an Int32."
(It doesn't matter if I'm in a Oracle database project or some other project.)
Trying to Generate Script To Project... when I'm in a Oracle Database Project, Visual Studio (2005) crashes. It appears to be some overflow exception according to crashinfo:
EventType : clr20r3 P1 : devenv.exe P2 : 8.0.50727.762 P3 : 45716759
P4 : mscorlib P5 : 2.0.0.0 P6 : 461eee3d P7 : 407b P8 : a3
P9 : system.overflowexception
(With ODT 11.1.0.5.10 beta it worked fine dispite the issue discussed in thread: Re: Issue with Generate Create Script in new ODT 11.1.0.5.10 beta
/Tomas

Tried to debug this error and got these exception details. Hope it helps!
/Tomas
System.OverflowException was unhandled
Message="Value was either too large or too small for an Int32."
Source="mscorlib"
StackTrace:
Server stack trace:
at System.Decimal.ToInt32(Decimal d)
at System.Decimal.op_Explicit(Decimal value)
at Oracle.Management.Omo.TableSpaceQuotaDetails.FillTableSpaceQuota(OracleDataReader reader)
at Oracle.Management.Omo.User.FillTableSpaceQuotas(OracleDataReader reader)
at Oracle.Management.Omo.Connection.GetUserCollection(Boolean refresh)
at Oracle.Management.Omo.Connection.GetUsers(Boolean refresh)
at Oracle.Management.Omo.TableSQLGenerator.GetCreateSQLs(OmoObject obj, ArrayList& typeAndNames, Boolean checkRequired, Boolean appendSchemaName)
at Oracle.Management.Omo.TableViewBase.GetCreateSQLs(Boolean appendSchemaName)
at Oracle.VsDevTools.OracleUILDBProjectServices.GenerateCreateScript(OracleUILConnCtx connCtx, String[] objectNames, String objectOwner, OracleUILObjectType objectType)
at Oracle.VsDevTools.OracleUILDBProjectServices.GenerateCreateScriptAsyncMethod(IntPtr ppvObj, OracleUILConnCtx connCtx, String[] objectNames, String objectOwner, OracleUILObjectType objectType, ICollection& scriptText)
at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
at System.Runtime.Remoting.Messaging.StackBuilderSink.PrivateProcessMessage(RuntimeMethodHandle md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
at Oracle.VsDevTools.OracleUILDBProjectServices.GenerateScriptAsyncMethodDelegate.EndInvoke(ICollection& scriptText, IAsyncResult result)
at Oracle.VsDevTools.OracleUILDBProjectServices.OnGenerateScriptAsyncCompletion(IAsyncResult ar)
at System.Runtime.Remoting.Messaging.AsyncResult.SyncProcessMessage(IMessage msg)
at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)

Issue with Setting Application Item

Hi All,
I have an issue with setting the value of application item G_USER_ID as part of the login process.
I use customized authentication for login. I have created an application item G_USER_ID, and in my CUSTOM_AUTH procedure, I am setting its value as APEX_UTIL.SET_SESSION_STATE('G_USER_ID', l_user_id);
For some reason, the value is not set to G_USER_ID the first time I login. When I log out and login again without closing the browser, the value is set. Note that I even tested with a static value instead of l_user_id like APEX_UTIL.SET_SESSION_STATE('G_USER_ID', '5555555'); but still fails to set during the first login.
I hope someone can guide me as to what I am doing wrong here.
Thanks!
JMcG

What does this do?
:SVR_FLAG := NVL(l_mult_svr,'N');
Scott

How can i set rediffmail into my new ipad

how can i set rediffmail into my new ipad?? plz help me out..

Google for:
setup rediffmail on iPad
Also, have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

Previous computer crashed without my Adobe CS3 Design Standard for Macintosh application being uninstalled, I'm having issues with the CS3 on my new Macintosh laptop. Please help!

Since the previous computer crashed without my Adobe CS3 Design Standard for Macintosh applications being uninstalled, I'm having issues with the CS3 on my new Macintosh laptop. Please help, I've tried using the online "contact us" with no success, unable to get in contact with a tech support agent that can assist me.

CS3 is too old to run on a new Macintosh laptop, sorry. You'll have to purchase CS6 or a Creative Cloud subscription.

Having issues with phone calls on my new phone.

Having issues with phone calls on my new phone. Other user is hearing echoes or nothing at all. This seems to be a common issue on here. VERY annoying! Anything seem to fix this problem?

I had similar issues - Turns out it was a hardware problem or bad antennae - Call the tech support number and they can do some testing to determine the issue. They might be able to give you a replacement if you do it quickly.

Issue with setting Planning Data Source

I keep getting error when I try to set up the data source
the Oracle database = orcl
The data base schema EPMAPLAN
Password = EPMAPLAN
when i log on i to Oracle Database
Sys as SYSDBA
Password = Password01
so what what should be the Database Source Name = ORCL Correct ????
Server = win-392h1l307n1 or localhost
Databse = ORCL
User Name = ????????????
Password = ?????????
I try all the combinations
Please advise

Duplicate post - Issue with setting up planning data source
Cheers
John
http://john-goodwin.blogspot.com/

Notification settings on iPad 3 are set properly but my new IPad does not get alert badges or rounds on apps with all notifications selected and in notifications center. Why? Others are reporting same problem.

i just bought the new iPad and even though notifications are set exactly the same for mail and my app is turned on and in the Notifications Center and alerts and sounds selected for mail and apps only my iPad 2 is working. No alerts on iPad 3. I see other posts with same problem. Any suggestions or posts re same problem will be appreciated before I return to Apple Store for help. thanks.

Do you have system sounds muted? Check the button above your volume control on the right hand side of the iPad. If, when you change the button you see mute on your screen, you'll restore system sounds. If you see lock orientation, you can restore system sounds by double tapping your home button to bring up the task bar (most recently used apps). With your finger swipe those apps all the way to the right to reveal a mute icon on the left. Touch that icon and you'll restore system sounds.
Let us know if that was the issue.

Issues with setting up ATT 3g. ATT reconizes the setup but IPAD 2 won't connect with 3g network

Setup brand new IPAD 2 ATT wifi +3G. Everything went smooth even setting up the ATT cellular data connect. ATT reconized the purchase however the IPAD will not erconize the 3G function when the wifi is turned off. I have an Iphone 4 and the 3G network works excellant from where i'm using the IPAD 2.

We had the same issue, and had to take the iPad to an ATT store, where they changed out the SIM card. It worked fine after that.

Issue with set up of 2 new iPads on 4G

Similar Messages

Maybe you are looking for