Issue with 'Show approval controls in task details only' in Human Task

Hi,
In human task, for the approval controls / outcomes to be displayed only in the task details (Not in the task summary, actions menu), the below option was selected and it was working perfectly in SOA BPM worklist application (11.1.1.5.0). But when we migrate to 11.1.1.6.0, this was not working...
Option to be selected: .task > Assignment > Configure Assignment > Assignment > Show approval control controls in task details only.
We are anyhow planning to test in 11.1.1.7.0 also, but do anyone knows why its not working in 11.1.1.6.0?

I'm facing the same issue in 11g PS5. Any update on this?

Similar Messages

This is about issues with the approval of product registration.

Hi.
This is about issues with the approval of product registration.
In the absence of category for my problem dealing with Office 2007, I had to choose one of the enlightened choice categories. My proglem. Office 2007 is all well installed and functioning satisfactorily, except Picture Manager section. Every time I choose the
display of an image through Microsoft Picture Manager, I asked about registration. Several times I answered yes, and license code, implementation of tracing the proceeds smoothly. The problem is that by next preliminary to display images with Picture Manager
and it does not hsuker that I am registered and authenticated user.
What to do and what can I check out?
In advance thank you.

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
As the question is off topic here, I am moving it to the
Where is the Forum... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Issue with Inactive Approver Role in Workflow definition

Hi Experts,
we are having issue with Inactive Approver Role in workflow definitions.
we have created workflow for Master agreements and Projects. Phases and workflow are working fine.
But the issue is when a programmatically added approver has completed the approval activity, collaborator role is not changing from approver role to Inactive Approver Role mentioned in workflow definition. For example, you might select Reviewer in Inactive Approver Role, Then Selected collaborator role to be given to programmatically added approvers when the approval activity is completed.
This is functionality not happening when project or contract document approved and workflow completed in project and MA. we have followed all the standard functionality when we have created workflow. Please see screen shot for the same.
Can anyone please tell me is there any functionality we missed it or do we need to write any script in xpdl or do we need to check anything with collaborator role or with security profiles.
we have checked with other roles also same issue coming.
This Reviewer is in active state and have Readonly profile. We don't have Pre script in this workflow because we are using standard approval.
Thanks in advance!
Lava

Thanks gary for your helpful answer.
As per your answer We have added the approver role in the prescript so that it gets added programmatically , still no luck.
here is the script we wrote in prescript.
import com.sap.eso.api.common.*;
import com.sap.eso.api.projects.*;
import com.sap.odp.api.workflow.*;
import com.sap.odp.api.usermgmt.masterdata.*;
import com.sap.eso.api.doc.collaboration.*;
import com.sap.eso.api.doccommon.masterdata.*;
import com.sap.eso.api.ibean.*;
import com.sap.odp.api.ibean.*;
import com.sap.eso.api.contracts.*;
import com.sap.odp.api.doc.collaboration.*;
collaboratorsCollection = doc.getCollectionMetadata("COLLABORATORS").get(doc);
if (collaboratorsCollection.size() > 0)
   for (int i = collaboratorsCollection.size() - 1; i >= 0; --i)
        collaboratorsCollection_member = collaboratorsCollection.get(i);
        if (hasValue(collaboratorsCollection_member))
           collaboratorRole = collaboratorsCollection_member.getCollaboratorRole().getDisplayName();
            // Get approver of Role "Approver".
           if(collaboratorRole.equals("Approver"))
                principal = collaboratorsCollection_member.getPrincipal();
if (hasValue(principal))
     addApprover(principal);
Do you have any other suggestions? or if you have any related code snippet please share with us.

Is apple going to fix the magic trackpad issue with Autocad zoom/pan soon? It only started happening when I updated to Yosemite

is apple going to fix the magic trackpad issue with Autocad zoom/pan soon?
It only started happening when I updated to Yosemite
I am using macbook pro 15" Retina

Although it not only bothers me but alot of other photo booth users aswell

Issue with InDesign & Illustrator -- Control Panel and Tool Panel don't show

I just downloaded CS5 Creative Suite onto my shiny new MacBook. I'm formally a PC user and have used the CS suites for a long time, but haven't upgraded since CS3.
I open a file on the MacBook in Illustrator or InDesign and it shows the document window and the pasteboard. But it doesn't show the Control Panel or the Tool Panel.
Any ideas on how to get these items to show up?

I ended up uninstalling the programs and reinstalling them, on the
recommendation of a friend. This has fixed the issue.

Issue with showing input forms for update SQL statement

Hi guys - I'm currently doing a college project and I'm not overly experienced in the area of Java/JSP but I'm having an issue with a project. I have a JSP project inserting, viewing and deleting rows from a database but having an issue getting the update/modify function working in my project.
If I hardcode values into my variables and launch the project it updates fine, but I believe theres an issue with how I'm calling the existing rows. I wish for the user to be able to view the rows from the database and modify as they wish. Once they submit the modifications, I want the row to be updated. Can anyone see where the problem might exist in my code below? I hope it's something small, but I'm not able to fix it at the moment and would apreciate anyone's help! :)
The problem I'm facing at the moment is the input boxes for displaying the current rows from the database are not even showing up..
ModifyNode.jsp:
<%@page contentType="text/html" pageEncoding="UTF-8"%>
<%@page import="suaspackage.NodeManager" %>
<jsp:useBean id="AddNode" scope="session" class="suaspackage.NodeManager"/>
<%@ page language="java" %>
<%@ page import="java.sql.*" %>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
   "http://www.w3.org/TR/html4/loose.dtd">
<html>
    <head>
        <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
        <title>Suas</title>
    </head>
    <body
    <%! // Class level declarations
        Connection dbCon; // interface type in java SQL
        ResultSet rs; // interface type in java SQL
        String serverName = "localhost";
        String nodeID;
        String valowneremail;
        String valownersms;
        boolean bFirstTime;
        %>
        <%
        bFirstTime = true;
        if(request !=null){
            if(request.getParameter("submit") != null){
                nodeID = "6";
                valowneremail = request.getParameter("OwnerEmail");
                valownersms = request.getParameter("OwnerSms");
                bFirstTime = false;
                AddNode.update(nodeID, valowneremail, valownersms);
        %>
        %>
    <%
        try{
        Class.forName("com.mysql.jdbc.Driver"); // SQLServer specifics 1
        dbCon = DriverManager.getConnection( // SQLServer specifics 2
                "jdbc:mysql://" + serverName + ":3306" + "/suasdb", "root", "9631");
        Statement stmt;
        String sqlString = "select nodeid, node, owneremail, ownersms from nodemanager";
        stmt = dbCon.createStatement();
        rs = stmt.executeQuery(sqlString);
        } catch (ClassNotFoundException e){
            out.write("<B><CENTER><P>");
            out.write("Error loading class for Suas database connection: </P><P>");
            out.write(e.toString());
            out.write("</B></CENTER></P>");
            } catch (SQLException e){
                out.write("<B><CENTER><P>");
                out.write("Error accessing Suas database connection: </P><P>");
                out.write("</B></CENTER></P>");
        if(rs!=null){
    %>
<jsp:include page="includeheader.jsp" />
<table width="100%" border="0" cellspacing="0" cellpadding="0">
    <tr>
      <td><img src="images/pagemarker_nodemanager.jpg" alt="Node manager" width="176" height="55"></td>
    </tr>
</table>
         <jsp:include page="includenodemenu.jsp" />
<TABLE WIDTH="75% BORDER="0" CELLPADDING="5" ALIGN="CENTER">
<TR BGCOLOR="#9ddc4f">    </TR>
<br>
<TR BGCOLOR="#9ddc4f">
<TH>Node ID</TH>
<TH>Node</TH>
<TH>Owner E-Mail Address</TH>
<TH>Owner SMS Number</TH>
<TH></TH>
</TR>
         <% } else {
            %>
<% while (rs.next()){
    %>
<FORM>
<TR BGCOLOR="#d7eabf">
    <TD><%=rs.getString("nodeid")%></TD>
    <TD><%=rs.getString("node")%></TD>
    <TD><INPUT size="20" type="text" name="OwnerEmail" value="<%=rs.getString("owneremail")%>"</TD>
    <TD><INPUT size="20" type="text" name="OwnerSms" value="<%=rs.getString("ownersms")%>"</TD>
    <TD><INPUT type="submit" name="submit" value="Save"></TD>
</TR>
<% }
    %>
    </body>
</html>
{code}
The relevant part of my NodeManger package:
{code}
    public void update(String updateNodeId, String valEmail, String valSMS) throws ClassNotFoundException, SQLException{
        try{
            String updateSQL;
            String nodeid = updateNodeId;
            String updateowneremail = valEmail;
            String updateownersms = valSMS;
            Connection dbCon;
            Statement stmt;
            ResultSet rs;
            String serverName = "localhost";
            Class.forName("com.mysql.jdbc.Driver"); // SQLServer specifics 1
            dbCon = DriverManager.getConnection( // SQLServer specifics 2
             "jdbc:mysql://" + serverName + ":3306" + "/suasdb", "root", "9631");
            updateSQL = "update nodemanager SET owneremail='" + updateowneremail + "', ownersms='" + updateownersms + "' WHERE nodeid='" + nodeid + "'";
            stmt = dbCon.createStatement();
            stmt.execute(updateSQL);
        } catch (ClassNotFoundException e){
            throw(e);
        } catch (SQLException e){
            throw(e);
    }{code}
Edited by: daveomcgee on Apr 9, 2009 8:03 AM

I support what ThomYork suggests. Learn how to properly separate database/business logic from your view logic. Learn how to use servlets and JSPs together. Read abourt DAO classes. Learn how to build a view in JSPs using taglibs (JSTL to begin with).
You might think it is too much work, but if you learn this stuff the wrong way now, it is going to be that much harder converting to the clean, readable, reusable and maintainable way later on.

DVR issue with show overrun by 1 minute

New customer to FIOS. Loving the service so far however, I am encountering a problem with show overrun.
I am DVRing two shows at 9pm. I am also attempting to DVR two shows at 10pm.
Show A (records from 9:00-10:01) is scheduled to run until 10:01pm. Therefore the FIOS DVR will not allow me to record 3 shows, even though Show A is only going over by one minute.
Cablevision used to allow me to alter the recording time by changing the recording time by a minute. Ergo, my 10pm show could be recorded from 10:01 -11:00. I don't care if I miss the first minute recap of the show.
Is there anyway for this to happen? To be able to alter the actual record time, so that it would not completely disregard the entire 10pm show I want to record?
Thanks in advance!
Solved!
Go to Solution.

Manual recording is not so much a 'solution' as it is a workaround. Come on Verizon even Comcast automatically just clips the 1 minute of off the next show and their DVR is terrible.

Issue with PO Approval (POAPPRV) delegate option

Hi All,
I'm working on PO Approval i.e. (POAPPRV) customised workflow. When I'm using forward option for PO approval it is working fine and PO is getting approved.
But at the same time if i'm using delegate option for the PO approval it is not apporving the PO and workflow is getting stuck at one activity.
for both process i'm using same set of data.
Please let m eknow if you have any idea about this issue.
Thanks,

Hi Kjetil,
Release strategy is being used. Configuration for release strategy is given as following.
RGroup Rcode   Workflow     Agent
Z6          R1         1                Blank
Z6          R1             1                Blank
Z6          R1             1                Blank
Z6          R1             1                Blank
Release is sequential.
For column 'Agent' mentioning position or User is not really useful because we are getting agents through Z table. Reason is: current org structure supports 1 position with multiple users from same department. In our scenario we need to find initiators department then find relevant approval levels for that departemnt. So I cannot mention any position in 'Agent' Column as release code will be locked against one position and one departetment.
Agents picked through Z table. Table has fields Agent/ UserID , level, department.
Logic to pick agents( Object and method created ):
When workflow starts, it finds department of the initiator.
For that department-> find approval levels available(L1, L2, L3).
For these levels -> Find Agent mentioned for that level.
Onece Agents are found for all levels -> Pass them to WF container.
In task activity, These agents are passed back to the rule and the task comes to know which agent it should go to.
Result : Four workflows start in sequence. When last level releases, only 1st workflow shows COMPLETED status. Rest three hang at level 2. If I see Me29N , release for that item is shown completed. To me it seems triggering of only first workflow is enough for release. Is there any way I can avoid trigerring of other three workflows?
Edited by: User112 User112 on Jan 25, 2008 6:30 AM
Edited by: User112 User112 on Jan 25, 2008 6:31 AM

Issue with request approval in OIM 11gR2

HI,
I have created an workflow so that when ever a user tries to provision an entitlement to a user then request should go the approver. Now whenever the request has been raised , workflow has been triggered and the approver approves the requet and the status of the request changes to approve. But even then the entitlement is not getting provisioned to the user. I am getting the below logs :
<Mar 20, 2013 5:10:09 AM PDT> <Error> <oracle.soa.bpel.engine.delivery> <BEA-000000> <Error: Fault not handled.
failure to handle a fault thrown from a scope, by any blocks in the scope chain.
This exception occurred because the fault thrown in the BPEL flow was not handled by any fault handlers and reached the top-level scope.
A top-level fault handler should be added to the flow to handle faults not caught from within the flow.
happened for conv_id = urn:E6A7D570915611E2BFA2613558FA7D90 and message guid = urn:E6A7D570915611E2BFA2613558FA7D90 and subscriberId = default/ApprovalWorkflowProj!3.0*soa_d071bc60-5d33-4a6d-a2f3-0a004bc66666/ApprovalProcess/20002-BpRcv1-BpSeq2.6-3, transaction will be rolled back>
<Mar 20, 2013 5:10:09 AM PDT> <Error> <oracle.soa.bpel.engine.dispatch> <BEA-000000> <failed to handle message
com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.oracle.com/bpel/extension}remoteFault}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
parts: {{
summary=<summary>oracle.fabric.common.FabricInvocationException: Unable to access the following endpoint(s): https://stgsso.a.b.c.com:443/workflowservice/CallbackService</summary>
,detail=<detail>Unable to access the following endpoint(s): https://stgsso.a.b.c.com:443/workflowservice/CallbackService</detail>
,code=<code>null</code>}
Please help me in resolving this issue.
Thanks,

1. End user raising the request is able to view the process form, I need to restrict few attributes i.e. position and responsiblity should not be visible to end userEnd user will see Application Instance Form and you can customize the UI to hide attributes
2. Position and Responsibility should be provided by approver (this is specified in request data set of provision resource)
Make your Java Code/Beans/Expression to show/hide attributes conditionally.
3. As per Oracle document there is no request data set for PROVISION and MODIFY resource. What is the replacement for this?Application Instance Form
4. After Request is raised it has been assgined to xelsysadm, how do i control the approval ?Approval Policies

Issue with Java Mission Control 5.3

I see the following issue when using Java Mission Control 5.3 - the text area that appears in the Method Profiler section of the Code => Call Tree tab accepts text for filtering purposes. However, the filtering is seen to be applicable only to the top level nodes. For e.g., I am unable to search for a certain Java package name (or its part) that I know exists deep down in the stack trace. Is there a way to search for text that appears in lower level nodes? I find that the search does not work even if I expand the tree using the Expand Subtree option. Thanks for any insight.

I also have this issue on 5.3. It is very difficult to do even a basic level of profiler analysis. The tool is ok at finding big watermelons (CPU cost or memory allocations), but when you want to drill in and see any more detail, it becomes quite painful. Best case is that I would be able to "swim" through the profile data, moving easily from method-to-method, and see the recorded sample counts in a base (samples in this method itself) and cumulative (samples in this method and all called methods) fashion. The indentation in the tree view can be painful. I would suggest a more simplified view as an option,
PARENT (callers) methods, full names and cumulative sample counts (percentages would be nice as well)
SELF (called) method, full name and cumulative sample counts (percentages would be nice as well)
CHILD (calles) methods, full names and cumulative sample counts (percentages would be nice as well)
Clicking on any row in the above immediately makes that method become the SELF in the view.
Also, I should be able to enter the class/method name into some text box above this view and easily get into the data for the method. With the current tool, there is no way to quickly go to the data for a specific known method.

Issue with DTW import of BP bank details

Dear Experts,
While trying to update IBAN & Swift Code for existing bank details in BP Master using DTW, below error appears :-
Enter Valid Code (OCRB.BankCode) [?????173-36] Application defined or object defined error65171
I have checked the Bank code & it is correct.
Another question is if there are more than 1 entry in OCRB template, & a particular entry is to be update, linenum is required but there is no field named linenum available in OCRB table to determine which line in table is to be updated. But in DTW sample template for OCRB, linenum field is shown. Please advise from where to get this value or how to determine which line to be updated.
Another issue is that even if there is a single line in DTW template it takes 10-15 min for DTW to show the results. DTW hangs for this period.
I have tried to update the entry manually in BP master data to validate the IBAN number & it happened successfully.
I checked the import in a test environment & there as well I faced the same issue. Tested the issue on 8.82 PL12 & 14 with same results.
Please advise.
Thanks & regards,
Nitin

Hi,
Please refer SAP note:
865191
- DTW Troubleshooting Guide
Thanks & Regards,
Nagarajan

Issue with displaying QM control chart for specific date range

Dear All
In our chemical mfg organisation, we just implemented SAP QM solution and things are working fine. I have implemented control chart functionalities as below:
SPC Criteria in Inspection Plan: Task List Charateristics / Material (0020)
Sampling Procedure: Fixed Sample / SPC Inspection (without inspection point)
We use process orders to get the inspection lots for products (material) and record results for the MICs and UD the inspection lots.
Currently all our Control Chart have status 1 (created) and we have not moved any of those charts to status 3 and 5 yet.
Using QGC1 when user trying to run control chart for any particular material in the plant and for a specific date range, report showing all the charts for that material with different MICs as expected. Though the result is NOT restricted to the selection dates either against "Lot Created On" or " Insp. Start Date" ( may be due to SPC criteria????) , its always showing all the result for any particular MIC for that material starting from go live till today.
How to restrict the dispaly of result on the chart for any particular MIC against the Material / Plant within a specific date range ?
Looking forward for your response.
Best Regards
SK

Hi,
1. Even though when i give the Created on, and to date the system is displaying the report which is prior to the created on date.
2. Similarly the report data is different when the field is maximum no of Hits is given. for example when i giving this field as 10, 20, 30, etc the report is showing only 10 line items. if i enter 50, 60 etc it is showing the list for half i given.
Note that system is having more than 1000 line items to display..
Regards,
R. Loganathan

Issue with webservice data control while invokin bpel process from ADF side

Hello Experts,
we are creating webservice data control to invoke bpel process from ADF side.
When I run the application and inovoke the bpel every thing is working fine.
But when we are changeing the instances from DEV to SIT the bpel url(hostname and port) will change.
So we just edited DataControls.dcx file and we just replaced the wsdl url and trying to run the applicaiton.
This time the applicaiton is not invoking the bpel process.
If I remove the webservice data control and recreate it with new WSDL url then it is working fine.
Can any one tell us what the exact issue is. Is there any other files do i need to modify or etc.
Thanks & Regards
Gayaz

DataControls.dcx & connections.xml (.adf/META-INF)

HR Securtity Issue with CATS_APPR_LITE - Approve Working Times and query

hi Gurus
here is the our issue :
1. User need access to do timekeep as well as query . In order to process the time keep task one of the transaction used in the process is CATS_APPR_LITE which requires P_ABAP in the role or by transaction ( Se93 added P_abap object) .
From the query side role this should not have P_ABAP since giving access to this will have access to sensitive data even though the roles are restricted by Personal area or structural authorisation.
If both roles are assigned to users then P_ABAP from the timekeep role will overwrite the query roles and users get access to data for which they should not see .
We have created dual sign on to avoid this task but is there a better way that users can do this task by just single id.
any suggestions

Hello,
CATS_APPR_LITE is meant for Time Approval
CATS_DA is meant for Display Working Times.
Can you ellaborate more if this does not solve your inquiry?
Thanks.
REgards,
Bentow.

Issue with OEM grid control.

I created a stream replication for scott schema on 10gR2 using maintain_tables.
Everything is working fine and for initail two days there was no issue when i checked the diffrent processes using OEM grid control. After two days, OEM is not showing anything under the "propagation" process and instead showing "no data found". I checked the dba_propagation and there is a propagation process in that. Even the replication is working fine. So is that an issue/Bug in OEM? Any cure for this?
Kapil

I created a stream replication for scott schema on 10gR2 using maintain_tables.
Everything is working fine and for initail two days there was no issue when i checked the diffrent processes using OEM grid control. After two days, OEM is not showing anything under the "propagation" process and instead showing "no data found". I checked the dba_propagation and there is a propagation process in that. Even the replication is working fine. So is that an issue/Bug in OEM? Any cure for this?
Kapil

Issue with 'Show approval controls in task details only' in Human Task

Similar Messages

Maybe you are looking for