Issue with siebel 7.5 dashboard prompt and grandtotals

Hi Group
We are having a weird issue on a dashboard page in 7.5 version.On our dashboard there is report with columns like area,area values and area values column is being filtered with a dashboard prompt.
The dashboard prompt is working fine by applying the selected filter value but we are doing subtotals by area and grand total at the end.The subtotal and grandtotal are not changing with the filter value selected.
Say we want to see area only having area values >=40000 the report is showing right areas applying this filter to areavalues,but the subtotals and grand totals still showing up for all areas and not for selected areas as per the filter.But when we run this report individually in Answers we are getting right subtotals and grandtotals by applying filters.
I know description may not be very clear for you guys but can give you any kind of clarification you want in detail.
I believe this is somekind of bug in this version.
Please let me know.
Thanks a lot.

Quit the applications that you are not using. Monitor RAM usage with your Activity Monitor. Add more RAM, 6 Gigs is the max on your model.
When your Mac runs out of RAM, it starts using swap files on your hard drive, shown as page outs in Activity monitor. Your hard drive's speed performance will be noticeably slower than your RAM's speed.
Activity Monitor will also allow you to identify which apps are using the most RAM. The app is in your Application's Utilities folder.
Plus, Mid 2007 iMacs's (iMac 7.1) can run Mavericks, it's free, and will make better use of your RAM than Lion, IMHO.
P.S., If you actually have an iMac 6.1, it's a Late 2006 iMac and is limited to Lion.

Similar Messages

Can I pass parameters from a dashboard via a dashboard prompt and presentation variable to publisher report based on a data model with select statements in OBIEE 11g ?

I have a publisher 11g (v 11.1.1.7) report with a single parameter. The report is based on a data model not a subject area. I created a dashboard put a dashboard prompt and link to the report in separate section on the same page. The dashboard prompt sets a presentation variable named the same as the parameter in the report.
The problem was when I created the dashboard prompt, it forced me to select a subject area which I did (though did not want to) and then I created both a column and variable prompts. But clicking on the
report link completely ignored the value that I thought would be passed in the presentation variable to the report.
Side note : My report uses a pdf template for its layout where I have mapped the columns names from my data model to the form fields on the pdf form. I noticed that if I create a publisher report based on a subject area, then I do not have the choice to choose a PDF as a template type for my layout. (I only see BI Publisher Template as a choice).
I see some documentation online that suggest it could be done in 10g.
Thanks
M. Jamal

Ok,
I just tried that and it still doesn't pass anything to the prompt.
I changed the prompt to an edit field and I made the following weblink but when i click the link from an account it doesn't put anything in the prompt and all data for all accounts is shown.
This is the URL maybe I messed something up...
https://secure-ausomx###.crmondemand.com/OnDemand/user/Dashboard?OMTHD=ShowDashboard&OMTGT=ReportIFrame&SelDashboardFrm.Dashboard Type=%2fshared%2fCompany_########_Shared_Folder%2f_portal%2f360+Report&Option=rfd&Action=Navigate&P0=1&P1=eq&P2=Account."Account Name"&P3=%%%Name%%%
thanks

I tried playing a you tube video, but received a message prompt to download the latest version of Adobe Flash Player. The link to Adobe stated that there are issues with MAC OS X 10.7 and Flash Player 10.3. The new version did not download. Any Suggestion

I tried playing a you tube video, but received a message prompt to download the latest version of Adobe Flash Player. The link to Adobe stated that there are issues with MAC OS X 10.7 and Flash Player 10.3. The new version did not download. Any Suggestion

Hi Seattle
From Adobe site only!
flashplayer11_b1_install_mac_071311.dmg
Works fine.
Cheers Tomi

Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4

Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4

Hello surig84,
Thank you for providing the details of the issue you are experiencing when syncing your iPad. I recommend reviewing the following article specifically the section titled "Authorize using the correct account name."
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT1420 Even when I authorised my pc on my iphone, when i sync the iphone with a new purchase, it prompts and error that unable to sync due to pc not authorised.

Even when I authorised my pc on my iphone, when i sync the iphone with a new purchase, it prompts and error that unable to sync due to pc not authorised.

Hello, Jagatheswary.
Thank you for visiting Apple Support Communities.
The most common cause for this issue would be media or Apps present in your library that is purchased with another Apple ID. The article below will walk you through the process of verifying if that is the case or correcting the issue if not.
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Cheers,
Jason H.

Hide values on dashboard prompt and set defaults

I have a prompt with 3 values,
1) Year-Qtr
2) Year-Qtr Start Date
3) Year-Qtr End Date
2 and 3 are constrained based off of what is in the Year-Qtr drop down. How can I get 2 and 3 to automatically have the values set and also be hidden to the user.
Is this possible?

Check this thread out for different ways of hiding dashboard prompts which is already posted in our forums:
Hide dashboard prompts
And regarding the populating the default values based on the value selected in the other prompt is not possible. The default value will always be a hardcoded vaule which can be in the form of presentation variable or sql results or an expression.
Hope it helps
Thanks
Prash

Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I am operating with CS4. Photoshop produces an error " Could not complete your request because photoshop does not recognize this type of file"

Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I have operating with CS4. Photoshop produces and error " Could not complete your request because photoshop does not recognize this type of file"

Assuming you mean 5D Mark III, Photoshop CS4 cannot directly open raw files from your camera.
Generally speaking, Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS4 is no longer receiving Camera Raw updates.
You can double check this yourself:
First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
If you find your camera is supported by your version of Photoshop, you need to download the latest update for Camera Raw. There's more information on how to do that here:
Keeping Photoshop Up-To-Date
If your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
Photoshop Help | Digital Negative (DNG)
The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
-Noel

Need help with formating in a dashboard prompt

Hi
This should be an easy one. I'm creating some dashboard prompts and been looking on the Sample OBIEE and some prompts there. Well, what I would like to do is a prompt so simple as:
Prompt Label:
- alt1
- alt2
- alt3
- and so on ...
Have you seen what I've done? I want the Label of the prompt to be bold but the data inside, the alternatives should be normal.
What I do is that go to the Dashboard prompt, create it and so on and on the lower part of the Dashboard prompt edit pane "Display" I click on the pencil ... "Edit" ... go to "Format" and in there I choose "Style: Bold" ... the thing is that both Label and Alternatives turn Bold for me ...
What am I doing wrong?

Hi,
If you are using 11g then keep the prompt in a section and you can add section title and you can format it accordingly. But keep the name in the label as a BLANK.
And if you are using 10g then by default the name in the label for the prompts becomes BOLD but the values would be normal.
Award points if found useful/helpful to you.
Regards
MuRam

URL issue with Windows 7 Internet Explorer 11 and SAP NW PI 7.

Hello SAP community,
I am facing a strange issue with Windows 7 - Internet Explorer 11 and SAP NW java services (I hope I am in the correct discussion) ...
When I try to open URL http://sapserver.hosters-name:port it is working so far with Windows 7 and Internet Explorer 11.
But when I click than on NWA (example), I am getting "http 500 server error".
I don't have the issue, when I start-up a VMware Workstation with Windows XP and Internet Explorer 8.
But now the strange part: In our network DNS (Domain Name Service), we can also open the URL by http://sapserver.our-dns:port.
Than it is working without problems with Windows 7 and Internet Explorer.
I would agree to state the comment - it is just a Windows 7/Internet Explorer 11 issue, if it wouldn't work for both URLs (http://sapserver.hosters-name:port = problem URL; http://sapserver.our-dsn:port = working).
We are using a SAP NW PI 7.x system. Some URLs for PI are using http://sapserver.hosters-name:port/java service.
Do you have any hints what is cause the issue - I suspect some with Internet Explorer and Firefox (because with Google Chrome at least the URL for NWA is opened, beside the issue, Google Chrome can't display NWA content)?
Thanks for your help.
Best regards
Carlos

Hi all,
I think I found the solution.
The reason seems to be, the domain name for http://sapserver.our-dns:port, "our-dns" was already added to the compatibility view settings of Microsoft Internet Explorer.
That seemed to be the reason, why it was working with http://sapserver.our-dns:port.
When I now added for http://sapserver.hosters-name:port the domain "hosters-name" to the compatibility view settings it is now working.
Internet Explorer Options => Settings for compatibility view => Add domain
Best regards
Carlos

Solution: iPad/iPhone Login issues with IIS as Reverse Proxy (Android and Windows Phone works)

Hi,
I had issues with iPad/iPhone access from external and tried a lot. Now I found my solution I like to share.
I setup a IIS on Windows Server 2012 with ARR 2.5 and Android and Windows Phone could login but not iPad and iPhone.
The IIS Log on the reverse proxy showed:
2013-02-26 12:03:31 <IP> POST /webticket/webticketservice.svc X-ARR-CACHE-HIT=0&X-ARR-LOG-ID=1996c8d7-09d0-4310-8da4-a8dfb7940e28 443 - <ClientIP> Lync%202010/1.6+CFNetwork/609+Darwin/13.0.0 - 401 0 0 124
2013-02-26 12:03:31 <IP> POST /webticket/webticketservice.svc X-ARR-CACHE-HIT=0 443 - <ClientIP> Lync%202010/1.6+CFNetwork/609+Darwin/13.0.0 - 502 3 12018 93
First Request gets a 401 while anonymous. Second try would be with authentication but it never reached the internal front end server.
After I installed a fix for ARR
http://forums.iis.net/t/1195560.aspx/1?ARR+502+3+Bad+Gateway+0x80072ef2+2147954418+The+supplied+handle+is+the+wrong+type+for+the+requested+operation the Apple Devices could login.

Hi,
This resolved our problem too!! So happy after 2 weeks of messing around with just about every setting recommended from all types of forums and rebuilding our reverse proxy I was at a loose end.
Our environment is Lync 2013 Enterprise, Lync 2013 Edge, IIS as Reverse Proxy on Server 2012 using ARR 2.5
We had Android and Windows clients working but no iOS devices at all. In the iOS log we were seeing
<h1>Server Error</h1></div><div id="content"> <div class="content-container"><fieldset> <h2>502 - Web server received an invalid response while acting as a gateway or proxy server.</h2> <h3>There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.</h3> </fieldset></div></div></body></html>
When the client was trying to retrieve from the webticketservice.svc
2013-04-11 17:19:44.659 Lync[4970:6c61000] INFO TRANSPORT TransportUtilityFunctions.cpp/907:<ReceivedResponse>
POST https://lyncwebext.contoso.com/webticket/webticketservice.svc
Request Id: 0x72cfc18
HttpHeader:Content-Length 1477
HttpHeader:Content-Type text/html
HttpHeader:Date Thu, 11 Apr 2013 16:22:25 GMT
HttpHeader:Server Microsoft-IIS/8.0
HttpHeader:StatusCode 502
Installed the HotFix from here:-
Hotfix for Microsoft Application Request Routing Version 2.5 for IIS7 (KB 2732764) (x64)
Rebooted the Reverse Proxy and iOS clients worked straight away for both Lync 2010 and Lync 2013 on both iPhone 5 and iPad both.
I hope this helps others as I was losing the plot :-)
Cheers
Sam

We have been having some issues with Email notifications not going out and getting hung up in SOST. Can anyone please tell me whether we can use Solution Manager to monitor outbound emails?

We have been having some issues with Email Notifications not going out and getting hung up in SOST. Can anyone please tell me whether we can use SAP Solution Manager to monitor outbound email?

What version of Solman are you using ? Check in t-code Rz20 >ccms monitor template of satelliate system , there would be option to monitor your outbound mails .You can sutomise your monitorig metrics in solman 7.1 else in 7.01 you use auto reaction methods to monitor .
Regards
Jay

Issue with presentation variables, dashboard prompt and filter

Dear Guru's,
I have a question about constraining a request with presentation variable set by a dashboard prompt. I have a dashboard prompt, that stores its value in a presentation variable . The prompt is about region. When the dashboard opens, the default of the prompt is all choices and it needs to show my reports with "All Choices". I've created the following filter on my two reports on the dashboard:
"Dim Student"."Region" = '@{variables.GILLES}'
or '@{variables.GILLES}' IS NULL
One report is just the column "Dim Student"."Region" (to see if it works) and with this report the above filter works just fine. When nothing is prompted it shows "All Choices" when a choice is made the report responds accordingly.
BUT
The second report on my dash with the same region column, but extended with some time dimension columns and a measure gives an error which I'm not able to solve.
+State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14023] None of the fact sources for ToDate(# Feitelijke Instroom:[DAggr(Feit Instroom en Uitstroom Opleidingen.# Feitelijke Instroom by [ Dim Tijd.Maand Omschrijving, Dim Tijd.Maand Nummer, Dim Tijd.Jaar, Dim Kwalificatie.Kwalificatie Niveau, Dim Leerling.RCBREGIO Regio] )], [Level JAAR]) are compatible with the detail filter [Dim Tijd.Maand Nummer = 3, Dim Tijd.Jaar = 2010].+
+(HY000)SQL Issued: SELECT "Dim Tijd".Jaar saw_0, "Dim Tijd"."Maand Nummer" saw_1, "Dim Tijd"."Maand Omschrijving" saw_2, "Dim Kwalificatie"."Kwalificatie Niveau" saw_3, "Dim Leerling"."RCBREGIO Regio" saw_4, "Feit Instroom en Uitstroom Opleidingen"."# Feitelijke Instroom Cumulatief" saw_5, REPORT_SUM(saw_5 BY saw_0, saw_1, saw_2) FROM repos_x WHERE ("Dim Tijd".Jaar = 2010) AND ("Dim Tijd"."Maand Nummer" = 3) AND (("Dim Leerling"."RCBREGIO Regio" = 'Noord-Oost') OR ('Noord-Oost' IS NULL)) ORDER BY saw_0, saw_1, saw_2, saw_3, saw_4+
While the exact same report but without the "or '@{variables.GILLES}' IS NULL" doesn't throw any errors but doesn't show the "all choices" by default.
The ultimate goal to achieve is to build a dashboard with several reports from several subject areas with one single prompt that opens default with "all choices" and constrains the reports accordingly.
Any help is highly appreciated.
Kind Regards,
Gilles

Phani,
I know "All Choices" is a special value and that it doesn't represent NULL. My filter construction seems to work fine.
My filter condition:
"Dim Student"."Region" = '@{variables.GILLES}'
or '@{variables.GILLES}' IS NULL
When it's set by the prompt it filters the request accordingly (first condition evaluates to true), when it's not set the second condition evaluates to true and shows all the results (or it's not filtered).
The problem is that it doesn't work when time dimensions are combined with this filter. Then it throws the error mentioned in the first post.
By the way: your suggested solution doesn't work.

Issue with SIEBEL - XI Integration with SOAP

Hi,
I have an issue with the integration of SIEBEL and XI via SOAP.
In the scenario Siebel calls a synch Web Service on XI. The provided WSDL was implemented on Siebel and when Siebel calls the Web Service the message is received correctly by the XI SOAP Sender Adapter and I can see the message in the Message Monitoring (SXMB_MONI).
The issue is during the mapping as the payload does not seem to comply with the structure XI expects in the message interface. When I load the payload of the SOAP Request send by Siebel into the Message Mapping Test Tool, all fields below the Message Type are in red. I found out that the problem lies in the way the namespace is addressed.
The payload I receive from Siebel that is not working in the mapping looks like this:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <MT_KUNDE_CRM xmlns="http://www.xyz.de/ariva/Kunden" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
- <KUNDE>
- <Account>
<CRM_Account_ID>1-S3YU</CRM_Account_ID>
<Customer_Segment>Other Account</Customer_Segment>
<Target_Market>Other Markets</Target_Market>
<Currency>DEM</Currency>
<Inactive_Account>N</Inactive_Account>
<Country />
<Account_Name>ATK Test Company 1</Account_Name>
</Account>
- <Account_Address>
<Country>England</Country>
</Account_Address>
</KUNDE>
</MT_KUNDE_CRM>
The structure that works looks like this:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <kun:MT_KUNDE_CRM xmlns:kun="http://www.xyz.de/ariva/Kunden" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
- <KUNDE>
- <Account>
<CRM_Account_ID>1-S3YU</CRM_Account_ID>
<Customer_Segment>Other Account</Customer_Segment>
<Target_Market>Other Markets</Target_Market>
<Currency>DEM</Currency>
<Inactive_Account>N</Inactive_Account>
<Country />
<Account_Name>ATK Test Company 1</Account_Name>
</Account>
- <Account_Address>
<Country>England</Country>
</Account_Address>
</KUNDE>
</kun:MT_KUNDE_CRM>
The ony difference between the two is that the second messages uses a prefix (kun) for the namespace while the first does not use it, although it is correct from an XML syntax perspective.
Can anybody help?
Thanks in advance.
Alex

Hi
Why don't you try and create a schema (XSD) which will prefix kun to the input, instead of using the message type created by XI.
Just a suggestion.
regards
Sameer

Duplication Issues with Photo Sync via iTunes/iPhoto and Photo Stream/iCloud (Detailed Scenario Given)

Hi Everyone,
I'd like to share an issue I am having with photo syncing between my iDevices.
Here is how I USED to sync my Photos between my iDevices (no issues with photo duplication)
Note: In this scenario, I use iTunes and iPhoto on my Mac. iCloud and Photo stream have NOT been activated in this case.
1. Take photos via iPhone that saves in Camera Roll
2. After a month or so, I will connect my iPhone to my Mac.
3. Import my Photos in iPhoto and arrange Events and Photos in monthly sections and add some of them in a separate Albums (ex. Written Notes Photos) for easy access.
4. Once the import is done, iPhoto prompts an option to delete photos in my Camera Roll which I do as I like to start a fresh month with empty Camera Roll in my iPhone.
5. In order to access the Photos I have imported in iPhoto in my iPhone, I go to iTunes and sync all my photos to my iPhone. This syncs my events, photos, faces, albums as they have been arranged in iPhoto in my Mac. (I cant delete them in my iPhone once they are synced. I have to delete in my iPhoto and sync again to have similar setup in my iPhone which isn't a problem).
NOW I decided I don't want to manually go through all this process and went on to enable the Photo Stream ON in my iPhone and iPhoto with iCloud.
THIS IS WHERE THE PROBLEM ENSUES.
1. I Take photos with my iPhone that saves in Camera Roll
2. This automatically syncs with my Mac due to Photo Stream which a really convenient.
3. It syncs automatically to Photo Stream, Events, Photos, Faces section in the iPhoto and I put put some of them (notes) in a separate album.
THE PROBLEM:
The Photos does not show up in the Album, Events and Photos Folder in my iPhone. They are only shown in Camera Roll. So I thought to sync using iTunes so the new Photos will be arranged in their appropriate folder like it used to with my prior process of syncing. This worked, HOWEVER the photos in my iPhone started showing DUPLICATES! Apparently, one comes from Photo Stream (which, if I delete on my phone also deletes in all my iDevices) and the other duplicate is from the iTunes sync (this sets up my photos as arranged in iPhoto which is what i WANT to happen as Photo Stream does not sync them accordingly).
SOLUTION I AM IN SEARCH FOR:
I want to be able to take photos with my iPhone that automatically syncs in iCloud AND iPHOTO AS ARRANGED IN MY MAC (Albums, Events etc) WITHOUT PROBLEM OF PHOTO DUPLICATES.

Other folks have resolved similar issues by trashing the iPod Photo Cache.
Regards
TD

Issue in Default selection in Dashboard prompt

Dear All,
I have a dashboard prompt with columns year and month.month column i kept as slider in that default selection i kept 45 days backward from current date,since my requirement is the end user have the option to selection the day backward instead of 45 they need to selection either 45 or 30 15 15 based on that they have to run the report.can any help in this regards.
appreaciate the immediate response !!!!
Regards
GN

Hi GN,
Create an variable prompt ( Eg: v_days ) and add custom values as 15,30,45,100 into it and keep the default as 45.
Use v_days variable in another column prompt (Eg: Period) with the format MON-YYYY.
Now when user selects no of days , period will get the corresponding change.
Thanks,
Haree

Issue with siebel 7.5 dashboard prompt and grandtotals

Similar Messages

Maybe you are looking for