Issue with Smart Recorder

Hi all - sorry if this is the wrong section.
Could someone tell me if there's a built in recording duration limit in Smart Recorder? It won't let me record more than 3 hours and 8 minutes (I need to be able to record a 4 hour DJ set live).
The drive i'm pointing it at has about 120Gb free so it should be ample for 4 hours.
Any clues??

Hi,
You might want to switch to the 1st tab ("Record Now") and select WMA format or WAV format with a lower sampling rate / bit rate so that you can have more than 4 hours of recording (WMA format is preferred). Hope this helps.

Similar Messages

Captivate 8 - Issues with correct recording of Software Simulations in monitor 2 (of 2)?

I've been recording Software Simulations in monitor 2 (screen 2 of 2) and an application in monitor 2 to produce automatic demo, assessment and training output. It should be possible but the system doesn't capture all recordable actions (the result is 1 slide for each of demo, assessment and training versions with the ‘final’ screen view and one mouse movement). However if I shift my recording area to screen 1 (i.e. monitor 1) there are no issues. It can be worked around, however is there some other set-up option I'm overlooking?
Thanks in advance for any input.
Jenny

Thank you so much for posting your question. I would have never stopped to think that which screen I was trying to record might make a difference. I was having huge issues with a software simulation not capturing all the necessary screen changes (on Monitor 2), but after reading your post, I moved it to Monitor 1, and it's working as it should again.
You just saved me lots of frustration.

Missing wave source with smart recorder

' Hello . I have a problem with my smart recorder . With xp i had the option to choose "wave" as my source for recording .
Now with vista 64 this option is gone . I can choose the option "what u can hear" but the kwality is not the same anymore.
Is it normal this feature is gone with vista . I have a x-fi extreme music card and the latest drivers .

Are you recording to losless wave or directly to lossy mp3/wma/etc.
Some 'general' limitations
Wav format: ----------------------------------------------------------------------
The WAV format is limited to files that are less than 4 GB in size, due to its use of a 32 bit unsigned integer to record the file size header (some programs limit the file size to 2 GiB). Although this is equivalent to about 6.6 hours of CD-quality audio (44. kHz, 6-bit stereo), it is sometimes necessary to go over this limit.
The W64 format was therefore created for use in Sound Forge. Its 64-bit header allows for much longer recording times. This format can be converted using the libsndfile library. The RF64 format specified by the European Broadcasting Union has also been created to solve this problem.
(source: Wikipedia)
Filesystem: ----------------------------------------------------------------------
NTFS5 - Limit Only by Volume Size
NTFS - Limit Only by Volume Size
FAT32 - 4GB minus 2 Bytes
FAT6 - 2GB (Limit Only by Volume Size)
FAT2 - 6MB (Limit Only by Volume Size)
(source: http://www.ntfs.com/ntfs_vs_fat.htm)
Maybe your recording software has some limitations too.
jutapa

Issue with Smart View when trying to connect to Planning/Essbase

Hi All,
I'm facing this issue with Hyperion 11.1.1.3 & 11.1.2. In Excel, I've created a connection in SmartView by giving the URL as http://ServerName:8300/HyperionPlanning/SmartView. After that i'm able to see "Servers" and when i started expanding that, it displayed the server name. When i clicked on the server name, it should display the Planning Application name right ? instead of that just a Cuble symbol is displaying. Do i need to make any settings for proper display of the Planning Application names ? This is perfectly working fine with HFM. I'm able to see HFM application names. Pls. advice

I was trying for shared conenction this morning and it was not working. Now all of sudden it started working. Even i've checked now, the private connection is also working fine with the URL http://planningserver:8300/HyperionPlanning/SmartView

Issue with Smart View for Planning Connection

Hi All,
I'm facing this issue with Hyperion 11.1.1.3 & 11.1.2. I've created a connection in SmartView by giving the URL as http://ServerName:8300/HyperionPlanning/SmartView. After that i'm able to see "Servers" and when i started expanding that, it displayed the server name. When i clicked on the server name, it should display the Planning Application name right ? instead of that just a Cuble symbol is displaying. Do i need to make any settings for proper display of the Planning Application names ? This is perfectly working fine with HFM. I'm able to see HFM application names

Well, the thing I always forget and have pulled much hair out over is to add the essbase server access to the planning group.
Check on that, and I will loosen the rocks in my head to see what else I can suggest.
Robb

Planning Data from formatting issue with Smart view in 11.1.2

Hi,
We are facing one strange issue in Smart view.
We have created a dataform in Planning as follows:
Columns:
FY10 FY10 FY10
Budget Budget Budget
Jan Feb Mar
But when we open this in Smart view, we are getting the columns as follows:
FY10
Budget
Jan Feb Mar
i.e. year and scenario are spreading across months instead coming at each column level.
We are using Hyperion Planning 11.1.2, Smart View 11.1.2 and Office 2003.
Please help us.
Thanks,
Naveen Suram

Are you saying you want the dimension members FY10 and Budget to be repeated in each column?
I think that can be done for Ad-Hoc Analysis mode, but not where you have opened up a Planning form.
Cheers

Issue with smart view add-in in MS word 2003

Hi,
I have smart view 9314 and office 2003 installed on my machine. I can see hyperion tab in excel and it works fine but i can't see hyperion tab in word or powerpoint. Its not in disabled items for word. I tried to add HsTBar.xla in word using Templates and Add-Ins option but it throws error: Invalid add-in. Any info to resolve the issue would be highly appreciated.
Thanks.

Office 365 Web Apps are not supported and cannot be supported as there is no platform for add-in's in that environment. http://www.microsoft.com/en-us/download/details.aspx?id=13602
Most Office 365 uses cases and users end up with Office installed on the desktop and at that point we are talking about normal Office Support. Right now it is up to the Office 365 administrator to determine the version of Office to be used by their 365 users. http://onlinehelp.microsoft.com/en-us/office365-enterprises/ff637585.aspx
Short answer is that Smart View does not support Office 365 Web Apps and there are no plans to support the Web Apps.

Issue with Smart View Help Contents using v11.1.2.0.01

Hi there,
I just installed v11.1.2.0.01 (Build 003) of the Smart View add-in on a MS Windows XP SP2 PC with MS Office 2003 SP3.
Unfortunately, the Help Contents in MS Excel does not seem to work as whenever I select Smart View > Help > Contents, nothing gets displayed. Selecting Smart View > Help > Technical Support and Smart View > Help > EPM Documentation takes me to various links on the www.oracle.com site.
I uninstalled then re-installed this specific version a few times but to no avail. I even checked the contents of each subdirectory where Smart View has been installed but could not find any Help files whatsoever.
1. Has anyone ever encountered this issue?
2. If yes, what do I need to do to resolve this issue and get the Smart View Help to be displayed?
Thanks in advance,
JBM

Well, reading the documentation about knowing where to find the documentation would have actually helped. At the bottom of page 10 of the Smart View ReadMe document, the following is mentioned under the "Documentation Updates" section:
"For Smart View online help to be available, the Shared Connections URL on the Advanced page of the Options dialog box must contain an EPM Workspace URL."
This question is now answered.
JBM

Issue with smart tv freezing

Just got new smart tv and keeps freezing when I go to the home page? The only way to get it out of the home page is to unplug the tv. It will work until you go into the home page 2-3 times and it will freeze up on the home screen. Any suggestions?

If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 631-3811.
- Peter

Production issue with Smart Form

Hi ,
Issue is:
Data getting poplutated in Dev system but not getting in Production system.
we are using standard FM CRM_OUTPUT_SINGLE_READ
which contains FM SSF_FIELD_LIST to which our smartform name is passed.
FM SSF_FIELD_LIST returns all the global definition fields of the smart form.
It has a statement
import fields to fieldlist
         from database stxfcontr(sf) id l_fullname.
Now in Dev system we get all the required values but in Production system it doesnt show any value.
Also in table stxfcontr i can see two values for my Form
Entries from Development System :
SF    ZCLSDXT_YI01_PRINT                                   0 1815
SF    ZCLSDXT_YI01_PRINT                      X            0 1830
Entries from Production system:
SF    ZCLSDXT_YI01_PRINT                      X            0 1584
I think problem is with IMPORT statement which is inside the FM SSF_FIELD_LIST ...
Is it has to do with ABAP memory or something like that? or something i need to do in FORM ..but since in dev system same FORM is getting value why i am not getting in Prodc.'
Please help...
If anyone can help me why it is not populating the fields?
Regards,
Mayank

hI Vishnu,
yes its been transported properly..
even when i execute this FM SSF_FIELD_LIST by passing my FORM name it doesnt displays the Global defined fileds in production but in Dev same FM displays all the fields.
Any idea how this table STXFCONTR gets entry in it..
I am working on Solution Manager system....
Regards,
Mayank

Issues with Smart Shape Buttons

Greetings all, another question for you Captivate Guru's out there...
Is there a way to force a non Smart Shape Button compliant LMS/Flex Wrapper to understand the object by adding a file that would identify the Smart Shapes as a valid button without updating the Adobe Libraries completely.
A certificate, perhaps some sort of Javascript, or something along those lines?
Is there a place where I can read the code that makes Smart Shape buttons work when published like current Flash Player protocol for them in the libraries?
Any help is greatly appreciated.
Thanks!

I'm using a Mac (latest version).
@devices: Android and iOS smartphones and tablets as well as Mac and Windows PCs.
"Do you see this same issue on a blank project (With 2 or 3 Smart Shapes) ?"
I'm not sure if I get you right, but the project I posted is nearly a blank project (created with CP7). So I think the answer is "yes".

Issue with video recording in PhotoBooth

Every time I record a video clip in Photo Booth I get the following issue. When I click the Stop button (after recording a few seconds of video) and the video clip descends into the tray below, the clip is blank (white) and freezes Photo Booth if I try to play it. If I delete the clip, pull it out of the Trash onto my desktop, and double click it, it will play just fine in a QuickTime window. Any thoughts on this issue would be greatly appreciated!

Yes, I have just used the normal Video-object together with the normal trick to load Flash Video files with it. Nothing special only with a full URL for the play()-method. I have attached the source code for your convenience. The original files are edited in Premiere Pro CS4 and are based on one original ripped DVD vob file and a newly created Quicktime-based slideshow animation which has then be edited into one using Premiere.
After that I have selected the sequence of the Premiere project which I have exported using File > Export which is using Adobe Media Encoder. For the encoding I haved used the Export Settings: "Format FLV | F4V", Codec On2 VP6 and then altered the video size and bitrate so that the file size gets smaller this is for the Alzheimer08.f4v file. The other file used the H.265 Web Medium profile with also the video size and bitrate modified after it got encoded and uploaded to my webserver.
The original files used by the Premiere Pro project are:
VTS_01_1.dv
Type: DV Stream
File Size: 2.6 GB
Image Size: 720x576
Average Data Rate: 3.4 MB/Second
Compressor: DV - PAL
Quality: Normal (3.00)
SLIDESHOW 2.mov
Type: QuickTime Movie
File Size: 3.2 GB
Image Size: 720 x 576
Average Data Rate: 3.4 MB/Second
Compressor: DV - PAL
Quality: Most (5.000)
Above information is obtained in Premiere Pro by selected Properties-option of the submenu when selecting the file.
Hopefully you can use this information but I could upload the original Premiere Pro project over the next few days. If you would be interested in it.
FLA file: http://www.letslearn.it/dropbox/alzheimer.fla

Issue with audio recorded playing early on playback

My system is a follows:
2 x Quad 2.8 Mac Pro (3,1)
8GB ram
OSX 10.9.3
Logic Pro X
Sound - Line 6 UX1 / Focusrite Saffire Pro 40 (issue untested with this card)
The issus - any audio I record (guitar/bass) plays a few milliseconds early (ahead of the beat) on playback. I keep having to move the region back a little to get the audio in time with the click (& no it's not my playing).
I'm not sure if my setting are wrong or there is something else going on here...
I did a google & apple forum search but found nothing - anyone heard of this issue before? Or are my audio setting off?
I've yet to try with my Saffire but will do so in the next few days...

Hi Seeren - my recording delay is set to what it has always been - the minimum. To be perfectly honest Im not exactly sure how this should be set...

Re: Issue with multiple records loading into cube

Hello Gurus,
A report is run on a monthly basis for Billing commissions. Info cube has all the data related to the Billing commission.
It has a custom field for total commissions for which the data gets populated from the DSO based on the Billing
document conditions. Look up has been done for the total commissions field. Most of them are showing up
the right values, but few billing documents are showing up the wrong values.
I made an attempt by reloading the effected Billing documents into Info cube, now the code works and
total commissions are showing up right values. I tried selective deletion and loaded the data for the whole month,
the billing documents again show up the wrong values. These billing documents show up the right values when
they are loaded individually.I tried checking if the code was wrong, but it was working when the effected ones
are loaded individually. Please let me know your suggestions on this. Thanks in advance

Nanda,
Please find the start routine below
Z9SD_O21 = Billing document header
      L_ZUARC like /BIC/AZ9SD_O2300-INV_QTY,
       L_ZUART like /BIC/AZ9SD_O2300-KPRICE,
       L_ZCGU like /BIC/AZ9SD_O2300-KNVAL,
       L_ZCTU like /BIC/AZ9SD_O2300-KNVAL,
       L_ZCNU like /BIC/AZ9SD_O2300-KNVAL,
       L_ZCQU like /BIC/AZ9SD_O2300-KNVAL,
FORM SELECT_POST_ST
    USING COMM_BILL_NUM LIKE /BIC/AZ9SD_O2100-DOC_NUMBER.
*         COMM_BILL_DATE LIKE /BIC/AZ9SD_O2100-BILL_DATE.
   IF COMM_BILL_NUM <> /BIC/AZ9SD_O2100-DOC_NUMBER.
* OR COMM_BILL_DATE <> /BIC/AZ9SD_O2100-BILL_DATE.
     CLEAR /BIC/AZ9SD_O2100.
     SELECT SINGLE DOC_NUMBER /BIC/ZPOST_ST
     INTO (/BIC/AZ9SD_O2100-DOC_NUMBER,
*          /BIC/AZ9SD_O2100-BILL_DATE,
           /BIC/AZ9SD_O2100-/BIC/ZPOST_ST )
     FROM /BIC/AZ9SD_O2100 WHERE
      DOC_NUMBER = COMM_BILL_NUM.
   ENDIF.
ENDFORM. "SELECT_POST_ST
*$*$ end of global - insert your declaration only before this line   *-*
* The follow definition is new in the BW3.x
TYPES:
   BEGIN OF DATA_PACKAGE_STRUCTURE.
      INCLUDE STRUCTURE /BIC/CS8Z9SD_O24.
TYPES:
      RECNO   LIKE sy-tabix,
   END OF DATA_PACKAGE_STRUCTURE.
DATA:
   DATA_PACKAGE TYPE STANDARD TABLE OF DATA_PACKAGE_STRUCTURE
        WITH HEADER LINE
        WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
FORM startup
   TABLES   MONITOR STRUCTURE RSMONITOR "user defined monitoring
            MONITOR_RECNO STRUCTURE RSMONITORS " monitoring with record n
            DATA_PACKAGE STRUCTURE DATA_PACKAGE
   USING    RECORD_ALL LIKE SY-TABIX
            SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
   CHANGING ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
*$*$ begin of routine - insert your code only below this line        *-*
* fill the internal tables "MONITOR" and/or "MONITOR_RECNO",
* to make monitor entries
* if abort is not equal zero, the update process will be canceled
* DELETE DATA_PACKAGE WHERE STORNO = 'X'.
* DELETE DATA_PACKAGE WHERE /BIC/ZPSTAS = 'A'.
* CG: 07/02/07 Assign Summarization group for each partner function
* based on Master Data.
   DATA: LV_LINES TYPE I.
   DATA: LV_RETURN(1).
   DESCRIBE TABLE DATA_PACKAGE LINES LV_LINES.
   IF LV_LINES > 0.
     CLEAR: LV_RETURN, SY-SUBRC.
     CALL FUNCTION 'Z_FIND_SUM_GROUP_2'
       IMPORTING
         MY_RETURN                      = LV_RETURN
       TABLES
         IT_DATAPACKAGE                 = DATA_PACKAGE
       EXCEPTIONS
         GENERAL_ERROR                  = 1.
   ENDIF.
   ABORT = 0.
*$*$ end of routine - insert your code only before this line         *-*
ENDFORM.

Recording LPs with smart recorder and sound quality off.....

Hi,
I have X-Fi Extreme music card on my PC and trying to record some LPs with SmartRecorder. These are classical LPs and I find that when played back, the orchestra (violins, choir, etc) sound like this was recorded in a tin can. Any ideas why this would be? I connected all my cables accordingly and?am still?getting this problem.

Which type of connection are you using there?
Do you have preamp stage w/ RIAA there before soundcard (you have connected the PC into your stereo system just the way
like you connect a casette recorder or you have connected your turntable w/ RIAA preamp directly into soundcard) or
have you connected your turntable (w/o RIAA + preamp) directly into soundcard?
If you're using the latter method, you need to have EQ w/ RIAA compensation added into signal (you need some ASIO/VST
capable recording software which allows you add FXs into signal (Hermann Seib's VSTHost) and an EQ capable for
compensation curve +20dB (20Hz) - -20 dB (20 kHz) (ddmf:IIEQ). It's possible that you
can't get levels set high enough w/o adding some gain plug-in into signal path. You can use Sonalksis FreeG VST (stereo)
for this (in VSTHost, place (route) the FreeG either after or before the EQ (try which works better for you)).
Also, check if the recording source is set correctly (w/ "What U Hear" option you get all added effects added
into signal (EAX, CMSS) so it's best to set input as Line-In) and turn all effects OFF.
If you record into lossy format as mp3 or wma, check that the bitrate is set high enough (I suggest you use bitrates
256 - 320). Also, do not use addons like Chrystalizer, etc..
If needed some software, http://www.head-fi.org/forums/showpost.php?p=282263&postcount=7
jutapaMessage Edited by jutapa on 05-08-200704:02 PM

Issue with Smart Recorder

Similar Messages

Maybe you are looking for