Issue with Smart View for Planning Connection

Hi All,
I'm facing this issue with Hyperion 11.1.1.3 & 11.1.2. I've created a connection in SmartView by giving the URL as http://ServerName:8300/HyperionPlanning/SmartView. After that i'm able to see "Servers" and when i started expanding that, it displayed the server name. When i clicked on the server name, it should display the Planning Application name right ? instead of that just a Cuble symbol is displaying. Do i need to make any settings for proper display of the Planning Application names ? This is perfectly working fine with HFM. I'm able to see HFM application names

Well, the thing I always forget and have pulled much hair out over is to add the essbase server access to the planning group.
Check on that, and I will loosen the rocks in my head to see what else I can suggest.
Robb

Similar Messages

Planning Data from formatting issue with Smart view in 11.1.2

Hi,
We are facing one strange issue in Smart view.
We have created a dataform in Planning as follows:
Columns:
FY10 FY10 FY10
Budget Budget Budget
Jan Feb Mar
But when we open this in Smart view, we are getting the columns as follows:
FY10
Budget
Jan Feb Mar
i.e. year and scenario are spreading across months instead coming at each column level.
We are using Hyperion Planning 11.1.2, Smart View 11.1.2 and Office 2003.
Please help us.
Thanks,
Naveen Suram

Are you saying you want the dimension members FY10 and Budget to be repeated in each column?
I think that can be done for Ad-Hoc Analysis mode, but not where you have opened up a Planning form.
Cheers

Issue with Smart View when trying to connect to Planning/Essbase

Hi All,
I'm facing this issue with Hyperion 11.1.1.3 & 11.1.2. In Excel, I've created a connection in SmartView by giving the URL as http://ServerName:8300/HyperionPlanning/SmartView. After that i'm able to see "Servers" and when i started expanding that, it displayed the server name. When i clicked on the server name, it should display the Planning Application name right ? instead of that just a Cuble symbol is displaying. Do i need to make any settings for proper display of the Planning Application names ? This is perfectly working fine with HFM. I'm able to see HFM application names. Pls. advice

I was trying for shared conenction this morning and it was not working. Now all of sudden it started working. Even i've checked now, the private connection is also working fine with the URL http://planningserver:8300/HyperionPlanning/SmartView

Issue with smart view add-in in MS word 2003

Hi,
I have smart view 9314 and office 2003 installed on my machine. I can see hyperion tab in excel and it works fine but i can't see hyperion tab in word or powerpoint. Its not in disabled items for word. I tried to add HsTBar.xla in word using Templates and Add-Ins option but it throws error: Invalid add-in. Any info to resolve the issue would be highly appreciated.
Thanks.

Office 365 Web Apps are not supported and cannot be supported as there is no platform for add-in's in that environment. http://www.microsoft.com/en-us/download/details.aspx?id=13602
Most Office 365 uses cases and users end up with Office installed on the desktop and at that point we are talking about normal Office Support. Right now it is up to the Office 365 administrator to determine the version of Office to be used by their 365 users. http://onlinehelp.microsoft.com/en-us/office365-enterprises/ff637585.aspx
Short answer is that Smart View does not support Office 365 Web Apps and there are no plans to support the Web Apps.

Issue with Smart View Help Contents using v11.1.2.0.01

Hi there,
I just installed v11.1.2.0.01 (Build 003) of the Smart View add-in on a MS Windows XP SP2 PC with MS Office 2003 SP3.
Unfortunately, the Help Contents in MS Excel does not seem to work as whenever I select Smart View > Help > Contents, nothing gets displayed. Selecting Smart View > Help > Technical Support and Smart View > Help > EPM Documentation takes me to various links on the www.oracle.com site.
I uninstalled then re-installed this specific version a few times but to no avail. I even checked the contents of each subdirectory where Smart View has been installed but could not find any Help files whatsoever.
1. Has anyone ever encountered this issue?
2. If yes, what do I need to do to resolve this issue and get the Smart View Help to be displayed?
Thanks in advance,
JBM

Well, reading the documentation about knowing where to find the documentation would have actually helped. At the bottom of page 10 of the Smart View ReadMe document, the following is mentioned under the "Documentation Updates" section:
"For Smart View online help to be available, the Shared Connections URL on the Advanced page of the Options dialog box must contain an EPM Workspace URL."
This question is now answered.
JBM

Issue with iTunes view for podcasts with the latest iOS update (for my Macbook Air, Sept 21, 2013)

I just got the latest update for iOS for my Macbook Air - and now all of my previously deleted podcast episodes are showing up as available for download from the cloud - which is clogging up my iTunes display. How can I get these previously downloaded, listened to, and deleted episodes off of my podcast view/list?

"Not only did it download a new version of itunes, but it also downloaded MS Word updates, and other software that required updating."
MS Word is not an Apple product so it could not've downloaded with all the Apple software updates.
"I clicked File > Check for Updates"
What program were you running to do that?
In any case boot from your OS installer disk and run Repair Disk from Disk Uility.

Crystal Ball 11.1.1 with Smart View 11.1.1.4 and Planning 9.3.3?

Hello,
I have installed Smart View 11.1.1.4 in a 9.3.3-environment, customer using SV with Planning 9.3.3 through independent provider.
This is working fine.
Now we're looking at Crystal Ball with Planning.
The thought is to use the "Simulation and Forecasting workbooks" data source in Smart View 11.1.1.4.
a) Is that possible, installling Crystal Ball Fusion Edition, using it with Smart View 11.1.1.4 and Planning 9.3.3?
b) Where can I find Crystal Ball Fusion Edition 11.1.1.x for download? Seems like the Oracle edelivery site only contains 11.1.2.1 ...
Thanks in advance.

a) Is that possible, installling Crystal Ball Fusion Edition, using it with Smart View 11.1.1.4 and Planning 9.3.3?I am not sure but I know these are the supported data sources for SV: Essbase, Planning, Financial Management, Hyperion Enterprise, Financial Reporting, Interactive Reporting, Production Reporting, Web Analysis or Oracle BI EE
b) Where can I find Crystal Ball Fusion Edition 11.1.1.x for download? Seems like the Oracle edelivery site only contains 11.1.2.1 ...Here is the link:
http://www.oracle.com/technetwork/middleware/bi-foundation/downloads/previous-releases-085543.html
Cheers,
Mehmet

I just got the iPhone 5s, I have had a 4 for the last few years, my husband uses a galaxy. I have never had issues with any of our phones connecting the the cars Bluetooth until this one sometimes it will connect and sometimes it won't. I drive a gm car

I just got the iPhone 5s, I have had a 4 for the last few years, my husband uses a galaxy. I have never had issues with any of our phones connecting to the cars Bluetooth until this one sometimes it will connect and sometimes it won't. I drive a gm car. A friend of mine drives an Acura and said she is also having the same problem? I have to connect the phone every time I get in the car.

Turn Off BT on your Phone & ReBoot..
Delete the phone from the vehicles memory..
Restart the Vehicle & go thro' the Pair set up..........

Language Setting for - Hyperion Smart View for Office

Hi,
Here's a scenario I need to find an answer to.
1. We have Essbase system 9 installed on a machine named: USESSSRVR and here the ESSLANG environment variable is set to "English_UnitedStates.US-ASCII@Binary".
2. We build two Unicode cubes, one for Korea Sales called APPKR.SALESCUB & other for Turkey Sales called APPTR.SALESCUB
3. Korean users are sitting in Korea & Turkey users are in Turkey & both these users need to see data in their local languages.
4. Since Essbase Excel Add-In is not compatible with Unicode cubes, we have asked them to use "Hyperion Smart View for Office".
Now question is,
-> Where in this entire system do I need to do Language Settings so that they see their characters correctly?
-> Is there a place in Smart View where you can set languages?
-> Also we have a limitation that we need to have both the applications APPKR & APPTR on the same Essbase server which is in US.
PLEASE HELP.
Thanks.
~Jaymin Darbari.

It's actually because you are installing over an old version. Uninstall SV, review the registry entries and directories and then reinstall with admin priv.
Of course when I looked it up on support the Oracle ID 1466433.1 suggests that the .net install is corrupt so was i going mad? Not beyond reasonable doubt since I put in an SR a while back about it so I have proof that it is listed as an " "internal bug #14149839 : "SMART VIEW EXTENSION ACTIVATOR OBJECT (-2147467262) This is reported for excel 2010" has been raised with development team. As per the update from the bug this issue has been addressed in patch 11.1.2.2.310 which is yet to be released."
So if you are on an earlier version of Office possibly is because of the .net install (which I think needs v3.5, at least for Office2003), but I would try do a clean install first.
Steve

Issue with 2wire dsl router when connecting power pc g4 via ethernet

Issue with 2wire dsl router when connecting power pc g4 via ethernet. The 2wire will keep resetting. When I connect my macbook pro via ethernet to the 2wire all is ok, but as soon as i connect the power pc. . . .reset. I have emailed 2wire support. They recommended using a different patch cable. Tried that.. .. anyone else having this issue???? Any help would be appreciated. . .

Search the discussions for issues with 2wire dsl routers. This has come up before in a discussion I've been involved with, but probably not to do with the MDD. I do remember it being a design issue with the router, something that was done to it before dispatch.
Let us know if you can't find it and we'll have a look.
If you afford it, bin the 2wire and go buy something decent like a Netgear.

User issue with a report supply planning area today monthly

this is a support issue....the user has an issue with a report supply planning area today monthly. The user is getting wrong values in BW, it sums PLOs and POs under production (config). for eg: BW says we are producing 46T while in R/3 we have 4T.

The issue was related to the heap size being too much and as a result the Class block memory was not getting enough memory. I think we can make a use of -XXCompressedRefs:32 parameter in the Java start up to allow the heap size to increase till 32 Gb.

Issue with Visibility Settings for Backgrounds and Layers

I am using Acrobat Pro XI 11.0.10 (Windows) and having an issue with visibility settings for layers and backgrounds. I am attempting to get backgrounds to appear while viewing in Adobe Reader and Acrobat Pro but not be printed and so far have had no success.
When using a background the Appearance Options dialogue has "Show when printing" unchecked, but "Show when displaying on screen" is checked. This results in the background not showing on the screen, and the background will only appear once the box for "Show when printing" is checked. It looks like the option for printing is dictating whether or not the background is able to appear.
Using layers has not worked either. The background layer is set to "Never Prints", but will still show up when printed.
I was wondering if anyone else has run into this and has a solution, or has any recommendations.
Thanks in advance.

Hi setrev2012,
How are you adding the backgroud?
The only way I can think to accomplish this is via a watermark.
The basics...
Open PDF in Acrobat. Choose Pages > Watermark > Add Watermark.
Select a jpg or PDF of your background and adjust scaling options as desired.
Then click the Appearance Options.. and uncheck the Show When Printing option.
In this image the PDF is a blank page with the word "Test" on it. The watermark is the stamp and impression (a stock photo jpg).
If you want a solid color background, just create a flat image of the background color for use as the watermark.
If you have already followed the steps and still facing the issue then please share the file with me at [email protected] so that i can have a look.
Regards,
Rave

Issue with Tree view

Hello experts,
I am facing a very strange issue with tree view.
I have created a custom component with a tree view. All data are coming in the tree view. But the strange thing is that the data is not getting displayed on the screen.
I am sure about the data because, when I am selecting a line from the tree, the data from that line is coming to the main screen.
Please help!!
Regards
Debolina

Hi experts...
Any pointers to this issue???
Please help!
Regards,
Debolina

Issue with Sales Views in MM01

Hi gurus,
We need to create a material with only views for Basic Data 1&2, and Sales Org. Data 1, Sales Org. Data 2 and Sales General Plant data.
The sales organization is created but when trying to assign the material (with existing Basic Data 1&2) to the Sales Organization the system is giving error "sales org. and distrib. channel invalid sales area".
Any idea what additional settings are necessary to assign the material to the sales org. ?
Thanks!
VL

Sales organisation itself is not enough, you have to define distribution channel also:
SPRO > Enterprise Structure > Definition > Sales and Distribution > Define, copy, delete, check distribution channel
Distribution channel has to be assigned to sales organisation:
SPRO > Enterprise Structure > Assignment > Sales and Distribution > Assign distribution channel to sales organization
Division should also be defined and assigned:
SPRO > Enterprise Structure > Assignment > Sales and Distribution > Assign division to sales organization
It's starnge that you want to create material master and still your config has such serious deficiencies...

I have an issue with disappearing option for 1920x1080 in Preferences / Displays.

Recently updated to 10.9 - have all updates installed - Mid 2010 iMac 21.5.
I have an issue with disappearing option for 1920x1080 in Preferences / Displays. - After overnight shutdown, my iMac woke up and the screen resolution of my 2nd was set at 800 x 600 - the display a Samsung S22B150 was previously working properly at 1920 x 1080. This option is no longer available in the system preferences - highest resolution available 1600 x 1200.
I use my mMac for Photography and use the second monitor for the interface, leaving the iMac screen as a full work area for the photos.
I have tried:
Power down Monitor & restart
Shutdown & restart
Shutdown & restart in Safe Boot Mode (options same in Prefs)
Power down Monitor & restart in Safe Boot Mode
Ran Disc Utility - Repaired Permissions, verified both HDD & Mac OSX
Udated Pram
I am now at a loss, I guess I could try a recovery, and download/install Mavericks again, but do not wish to do this if I can help it.
I have searched the net to see if there are any Terminal commands to enable the resolution, but can find nothing.
Anyone out there have any ideas, please.

Back up all data. Quit System Preferences if it's running.
Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
~/Library/Preferences/ByHost
In the Finder, select
Go ▹ Go to Folder...
from the menu bar. Paste into the box that opens (command-V), then press return. A folder should open. If it does, look for a file with a long name that begins "com.apple.preference.displays2". There may be several such files. Move them to the Trash.
Test.

Issue with Smart View for Planning Connection

Similar Messages

Maybe you are looking for