Issue with Smart View when trying to connect to Planning/Essbase

Hi All,
I'm facing this issue with Hyperion 11.1.1.3 & 11.1.2. In Excel, I've created a connection in SmartView by giving the URL as http://ServerName:8300/HyperionPlanning/SmartView. After that i'm able to see "Servers" and when i started expanding that, it displayed the server name. When i clicked on the server name, it should display the Planning Application name right ? instead of that just a Cuble symbol is displaying. Do i need to make any settings for proper display of the Planning Application names ? This is perfectly working fine with HFM. I'm able to see HFM application names. Pls. advice

I was trying for shared conenction this morning and it was not working. Now all of sudden it started working. Even i've checked now, the private connection is also working fine with the URL http://planningserver:8300/HyperionPlanning/SmartView

Similar Messages

Issue with BAPI_ACC_***_TRANSFER_POST (when trying to execute as per ABT1N)

Hello experts,
For this thread, please check the following link:
[Issue with BAPI_ACC_***_TRANSFER_POST (when trying to execute as per ABT1N);
Thanks and Regards,
Daniel.

Hi Experts,
The question has been answered as per the following "link":
[Issue with BAPI_ACC_***_TRANSFER_POST (when trying to execute as per ABT1N);
Daniel

Crystal Ball 11.1.1 with Smart View 11.1.1.4 and Planning 9.3.3?

Hello,
I have installed Smart View 11.1.1.4 in a 9.3.3-environment, customer using SV with Planning 9.3.3 through independent provider.
This is working fine.
Now we're looking at Crystal Ball with Planning.
The thought is to use the "Simulation and Forecasting workbooks" data source in Smart View 11.1.1.4.
a) Is that possible, installling Crystal Ball Fusion Edition, using it with Smart View 11.1.1.4 and Planning 9.3.3?
b) Where can I find Crystal Ball Fusion Edition 11.1.1.x for download? Seems like the Oracle edelivery site only contains 11.1.2.1 ...
Thanks in advance.

a) Is that possible, installling Crystal Ball Fusion Edition, using it with Smart View 11.1.1.4 and Planning 9.3.3?I am not sure but I know these are the supported data sources for SV: Essbase, Planning, Financial Management, Hyperion Enterprise, Financial Reporting, Interactive Reporting, Production Reporting, Web Analysis or Oracle BI EE
b) Where can I find Crystal Ball Fusion Edition 11.1.1.x for download? Seems like the Oracle edelivery site only contains 11.1.2.1 ...Here is the link:
http://www.oracle.com/technetwork/middleware/bi-foundation/downloads/previous-releases-085543.html
Cheers,
Mehmet

Planning Data from formatting issue with Smart view in 11.1.2

Hi,
We are facing one strange issue in Smart view.
We have created a dataform in Planning as follows:
Columns:
FY10 FY10 FY10
Budget Budget Budget
Jan Feb Mar
But when we open this in Smart view, we are getting the columns as follows:
FY10
Budget
Jan Feb Mar
i.e. year and scenario are spreading across months instead coming at each column level.
We are using Hyperion Planning 11.1.2, Smart View 11.1.2 and Office 2003.
Please help us.
Thanks,
Naveen Suram

Are you saying you want the dimension members FY10 and Budget to be repeated in each column?
I think that can be done for Ad-Hoc Analysis mode, but not where you have opened up a Planning form.
Cheers

Action aborted with error 500.when trying to deploy a Planning application

I am trying to deploy the SampAp sample application that comes with the Planning 9.3.1 installation. I have installed and configured everything successfully and have created, deployed, and uploaded the HFM sample applications just fine, but I am having trouble when trying to deploy the Planning application with the following detail.
Detail : Initiating Product Action...
Inspecting Deployment History...
Generating Headers and Callback Information...
Generating Application Data...
Preparing Product Request...
Posting Product Request...
Product Response:500...
Action aborted.

Falls into the issue desribed in http://support.microsoft.com/kb/918040
Try mitigatign using the workaround section
Arthur My Blog

Issue with Smart View for Planning Connection

Hi All,
I'm facing this issue with Hyperion 11.1.1.3 & 11.1.2. I've created a connection in SmartView by giving the URL as http://ServerName:8300/HyperionPlanning/SmartView. After that i'm able to see "Servers" and when i started expanding that, it displayed the server name. When i clicked on the server name, it should display the Planning Application name right ? instead of that just a Cuble symbol is displaying. Do i need to make any settings for proper display of the Planning Application names ? This is perfectly working fine with HFM. I'm able to see HFM application names

Well, the thing I always forget and have pulled much hair out over is to add the essbase server access to the planning group.
Check on that, and I will loosen the rocks in my head to see what else I can suggest.
Robb

Issue with smart view add-in in MS word 2003

Hi,
I have smart view 9314 and office 2003 installed on my machine. I can see hyperion tab in excel and it works fine but i can't see hyperion tab in word or powerpoint. Its not in disabled items for word. I tried to add HsTBar.xla in word using Templates and Add-Ins option but it throws error: Invalid add-in. Any info to resolve the issue would be highly appreciated.
Thanks.

Office 365 Web Apps are not supported and cannot be supported as there is no platform for add-in's in that environment. http://www.microsoft.com/en-us/download/details.aspx?id=13602
Most Office 365 uses cases and users end up with Office installed on the desktop and at that point we are talking about normal Office Support. Right now it is up to the Office 365 administrator to determine the version of Office to be used by their 365 users. http://onlinehelp.microsoft.com/en-us/office365-enterprises/ff637585.aspx
Short answer is that Smart View does not support Office 365 Web Apps and there are no plans to support the Web Apps.

Issue with Smart View Help Contents using v11.1.2.0.01

Hi there,
I just installed v11.1.2.0.01 (Build 003) of the Smart View add-in on a MS Windows XP SP2 PC with MS Office 2003 SP3.
Unfortunately, the Help Contents in MS Excel does not seem to work as whenever I select Smart View > Help > Contents, nothing gets displayed. Selecting Smart View > Help > Technical Support and Smart View > Help > EPM Documentation takes me to various links on the www.oracle.com site.
I uninstalled then re-installed this specific version a few times but to no avail. I even checked the contents of each subdirectory where Smart View has been installed but could not find any Help files whatsoever.
1. Has anyone ever encountered this issue?
2. If yes, what do I need to do to resolve this issue and get the Smart View Help to be displayed?
Thanks in advance,
JBM

Well, reading the documentation about knowing where to find the documentation would have actually helped. At the bottom of page 10 of the Smart View ReadMe document, the following is mentioned under the "Documentation Updates" section:
"For Smart View online help to be available, the Shared Connections URL on the Advanced page of the Options dialog box must contain an EPM Workspace URL."
This question is now answered.
JBM

Issues with cross tabs when trying to convert our cry10 reports to cry 2008

We are trying to convert our reports from crystal 10 to crystal 2008. Reports that contain cross tabs will not execute in crystal 2008. We are getting a report application failed error. Has anyone encountered this? What is the fix?

I did notice that in a formula I am using in the Summarized Fields section I have a Next() on a field that I am trying to compare the next record with the current record. If I take that Next() out, the cross tab will work. Why would using this cause me problems?

Getting error 789 when trying to connect with a PC remotely via VPN

When we set up the VPN we are getting a Error 789 when trying to connect with a PC. Any suggestions would be appreciated.

The utilities, provided on the CD, are not required for the PC to access the Internet through the 802.11n AirPort Extreme Base Station (AEBSn). They are only necessary for administering the base station.
If your PC is currently configured as a DHCP client, it shouldn't have any issues connecting by Ethernet. The AEBSn will assign the appropriate IP addresses required for connectivity to the Internet ... just like it does for wireless clients.

When trying to connect to Airplay speakers I get error message "The network connection timed out" although some sort of connection is made as the speaker is turned on. Same thing with Apple TV. Is the distance from my speaker/ TV the problem?

When trying to connect from iTunes to Airplay speakers I get error message “The network connection timed out” although some sort of connection is made as the speaker is turned on. Same thing with Apple TV. Is the distance between my PC and the speaker or the AppleTV the problem?

Hi whitwick,
If you are having issues with your network connection when attempting to use AirPlay, you may want to use the steps in this article to troubleshoot -
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
Thanks for using Apple Support Communities.
Best,
Brett L

Have been using FaceTime for long time with same person, for the last two weeks when trying to connect, we get connection failed message, something change in settings that we should look at?

Now getting FaceTime failed message when trying to connect with a person that were connecting successfully with up unto two weeks ago, has something changed?

Take a look around you here in this forum. Many people are talking about having problems using FaceTime. A few users claim to have contacted Apple and Apple says that they are aware of an issue with FaceTime and that they are working on it.
Some users claim that upgrading to iOS 7 solved there problem with FaceTime. Take a look around the forum and read some of the other discussions.

I can connect to iTunes on apple TV, but get "invalid I.d. Or password" message when trying to connect with iPad or iPhone. What the...?

I can connect to iTunes on apple TV, but get "invalid I.d. Or password" message when trying to connect with iPad or iPhone. What the...?

Hi Boscoboi,
Welcome to the Support Communities!
You may need to check the settings for your iTunes Store on the iPad and iPhone.
Sign out of the iTunes account, restart the device and sign back in.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311?viewlocale=en_US
If these basic steps don't resolve your issue, then follow the advice in this article for connectivity issues with iTunes:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers,
- Judy

HT5163 I keep getting No Service when trying to connect my unlocked phone to a new carrier. I know the SIM card works so it is an iPhone or AT&T issue.

I keep getting No Service when trying to connect my unlocked phone to a new carrier. I know the SIM card works so it is an iPhone or AT&T issue. Can anyone help me with this please?

You must complete the unlock process with the ATT SIM in the phone. Follow the directions you received with the email saying that your unlock was approved.
At the end of the process you should have gotten an message saying that your phone was succesfully unlocked.

My ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

my ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

yeah tried all that. the only thing that i havent tried is to delete itunes completely and restart. its the same with the ipad. i havent done a master reset. i just think it has to be something rather simple as it acknowledges that i have plugged in the ipad as it makes the noise it just come up usb not recognized. it shows up as an unknown device that doestn have any drivers
its driving me round the bend at the minute

Issue with Smart View when trying to connect to Planning/Essbase

Similar Messages

Maybe you are looking for