Issue with Sound Configuration

What I am doing wrong with my sound / published file?
It has been difficult to find a good video quaality/sound download configuration / Combination:
The video is really good!!
https://skydrive.live.com/redir?resid=1C690B4E4531C4D6!111
Here is the config used:
https://picasaweb.google.com/lh/photo/4h7iQLmk0jR_Y0vcKEp5g9MTjNZETYmyPJy0liipFm0?feat=dir ectlink
I am using a Sony Vaio VPCSA with Windiws 7
Regards

Skydrive wanted me to sign up for download.  Try this instead.
https://www.depositfiles.com/en/

Similar Messages

  • Issue with Sound Blaster Live! 24-bit driver

    ,Issue with Sound Blaster Li've! 24-bit driverw Hello, I have a 2004 Dell Dimension DIM900 and a couple months ago it began making a loud crackling noise sporadically. It sounds like real ear-piercing static, like when a microphone is being plugged in, only in short random bursts at alternating pitches so I originally thought my speakers were blown. I turned them off and decided to use a headphone set only to hear the same annoying sound.
    I looked in the sound settings and read that I have a Sound Blaster 24-bit internal driver in my system, assuming that information is correct.
    What can I do? I did the search and read the read on those X-Fi drivers that had a similar problem, but I didn't know if that was the same as this because the thread concluded that their problem was exclusi've to systems with Nvidia dual SLI graphic configurations and X-Fi drivers. ? Any input would be appreciated, thanks!

    Hi IT5,
    May I know if this Li've! 24bit came pre-installed on your Dell computer or did you purchase & install the sound card separately?

  • APEX Listener 1.1.4 install issue with listener configuration

    Oracle XE 11gR2
    APEX 4.1.1
    APEX Listener 1.1.4
    Glassfish 3.0.1
    =============
    Installing APEX Listener 1.1.4 to replace APEX Listener 1.0.2. Deployed apex.war file but now:
    (1) http://10.10.1.111:8080/apex/listenerConfigure web page comes up but with no frames/windows rendered, as if it can not find images. Still I can enter data into fields. Wonder why the graphics/images are missing when page is rendered.
    (2) after entering Listener connection information for user APEX_PUBLIC_USER, I get "Permission denied". I can connect via SQL Developer to APEX_PUBLIC_USER with same credentials. I was able to connect before with previous APEX Listener.
    Any ideas?

    Hi,
    (1) http://10.10.1.111:8080/apex/listenerConfigure web page comes up but with no frames/windows rendered, as if it can not find images.
    You either have to clean your browser cache or your browser is too old/not capable of rendering the css of APEX Listener correctly.
    (2) after entering Listener connection information for user APEX_PUBLIC_USER, I get "Permission denied". "Permission denied" doesn't sound an issue with your database configuration. Do you have anything in your APEX Listeners log (probably within your GFs server.log) for that issue?
    But perhaps the error disappears as soon as you also get a proper configuration page.
    -Udo

  • Wierd issue with Sound Blaster Z and Windows 8.1

    I have just started having an issue with my sound card. For the past year it has been working perfectly fine with no issues. There have been no recent changes to the computer, but within the past week, if I am in the middle of a game or listening to music, the computer will once a day lock up, I then have to restart the computer. After it restarts, the right speakers, and only the right will not work, Center, Subwoofer, and Left side speakers work 5.0. I then go the Sound Blaster Z-series control panel and re-enable the surround sound. At this point the Center and Subwoofer cease to work, but the right side works perfectly fine. After a couple of resets the center and subwoofer still do not work. I then have to go to the back of the computer and change the cable for the center / subwoofer from left most to the second left most (as looking at the back of computer from the top side). It will work fine this way with all speakers working, for roughly a day then it will lock up again. I have to go through the same process, but move the cable from the second left most to the left most output for it to work again. I tried for the past two days to troubleshoot by removing all the software and creative drivers. Same issue after reinstalling with a fresh driver set. Any help, because this is completely annoying.
    System Stats:
    ASUS P6T Deluxe Motherboard
    Intel Core i7 965 CPU
    Corsair Dominator 3x2 GB
    Intel 520 SSD 120 GB
    Samsung Evo 840 SSD 250 GB
    WD 500 GB (x2)
    XFX Radeon HD 7770 (X2)
    Sound Blaster Z
    Windows 8.1 Pro 64 Bit
    Thank You,
    Michael Mastro II

    Considering that there is already a ca0132 driver for linux, which was made to support chromebook pixel laptop. It should not be hard for creative to make that driver compatible with discrete cards and motherboards that make use of that chip. But Creative seriously dropped the ball on users and does not care about them. I do not understand this, because all previous creative cards are supported in linux. Steam OS and steam boxes are around the corner and Creative is missing a big opportunity.

  • Weird issue with sound control?

    I am not sure what is going on with my audio controls. I use MSI to control my audio (it's connected to the motherboard). The strange thing is, a crack appears on the "Reset EQ Setting" button.
    See link: http://www.facebook.com/photo.php?pid=30673857&l=2041bbbec3&id=1458901123
    That wasn't there when I first got the computer. Is there any way I could reinstall this? What could have caused the "crack" to appear? Has this happened to someone else?
    I have also noticed that sometimes when I am playing music, the sound wavers, as if I am adjusting the volume slowly up and down by 1 degree. Is this an issue with my motherboard or WMP? Please answer both questions.

    Quote
    I cannot find the MS-XXXX anywhere!
    Please read this thread:
    https://forum-en.msi.com/index.php?topic=113146.0
    If you can't find the model number, please look at the BIOS P.O.S.T. Status Screen and write down the full BIOS ID String as it appears in the following example picture:
    Example (taken from the second picture): A7375NMS V2.2
    The BIOS ID String will tell us a lot about the System.  In the above example, the following information can be decoded from the ID String:
    A...AMI BIOS Implementation
    7375 ... Model Number (=MS-7375)
    N... NVIDIA Chipset Board
    MS... MS Standard BIOS Release
    V2.2 ... BIOS Version 2.2

  • Issue with Network configuration - ACS 4113 Appliance

    We are having issues with two particular devices. I am trying to remove and add the devices, but when I do a search and go to their IP, I receive.
    Failed to edit blahblah.ourdomain.... Reason: The Host no longer exists.
    How do I get rid of this so I can readd the devices?
    Thanks
    Dwane

    Yes, ACS SE doesn't support csutil. Please use RDBMS with solution engine and see if that helps.
    Creating, Reading, Updating and Deleting AAA clients
    http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/configuration/guide/rdbms_sync.html#wp1011624
    Regds,
    JK
    Do rate helpful posts-

  • Issue with TableAdapter Configuration Wizard and CASE statements

    I am having an issue with using any CASE statements in the select clause for the Table Adapter Configuration Wizard (TCW).  I can take any query without a CASE and it will run fine, but inserting any CASE statement in the Select such as:
    SELECT
    (CASE WHEN :ras_sort = 'D' THEN TO_CHAR(a.TRANS_DATE,'YYYYMMDD')
      WHEN :ras_sort = 'C' THEN  c.CLAIMDEP_NAME
      WHEN :ras_sort = 'A' THEN  TO_CHAR(a.ACCOUNT_NUMBER)
      END) sort1
    FROM xxxx
    causes the TCW to error with "error in list of function arguments, 'THEN' not recognized" and several other errors.  I have tried with and without parameters in the CASE and have tried both forms of the CASE statement.  I have tried multiple queries, all that run with no problem outside of TCW and ODP, but this seems to be a real issue
    Is this a known problem and are there any workarounds that will allow use of the TCW?
    Thanks,
    Dave

    Hi Ashish,
    perhaps you launch the Web service wizard from the wrong location (i.e. not selecting the SEI you want to use). Did you strictly follow the steps described in the <a href="http://help.sap.com/saphelp_nwce10/helpdata/en/44/f36fa8fd1d41aae10000000a114a6b/frameset.htm">documentation</a> for creating the web service?

  • Not a question -version 7 has issues with sound.  Period.   Admit it and put out a fix

    There are known issues with version 7 and sound issues on the Iphone.  Apple - please fix it. 

    I'm of the older generation and even posting these messages are foreign to me... however i have read several posts of this very same issue after upgrading.   The phone rings but no other alerts sound.  It will repair itself after reset but that is short lived.  This affects ITunes as well.  

  • MacBook Pro mid-2014 Intermittent issue with sound

    This occurs in an intermittent fashion : I cannot adjust volume neither with the slider at the top of the screen, nor with the volume buttons of my keyboard. In fact, there is no way I can adjust the sound. I get this image (bottom) when I try to adjust the sound using the keyboard and the slider in the top menu is maxed and greyed out.
    Context:
    I bought this MacBook Pro last week, as a replacement for my mid-2009 MacBook Pro. I restored a Time Machine backup.
    The new computer came with Yosemite and the old one had Mavericks installed last time I made a backup, therefore the new computer was downgraded to Mavericks when I did the restore. After the Time Machine restoration was completed on the new computer, I (re)installed Yosemite.
    I just brought the computer to the Apple Store; the diagnosis tools were run and no hardware problems were found. As I said this is an intermittent problem, so sometimes I restart the machine and it works normally, other times the problem occurs. (1 out of 3 reboots, i'd say...)
    What do you think ? Hardware problem ? Software issue due to Mavericks being restored on top of Yosemite ?
    Any others have got the same issue ?
    Thanks folks,
    Emile

         Reset PRAM. http://support.apple.com/kb/PH18761?viewlocale=en_US&locale=en_US
         Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • Is anyone having issues with sound after upgrading RAM?

    I recently bought a 2009 Mac Mini with 1GB of RAM. Everything was working fine so I decided to upgrade the RAM to make running more apps a little smoother.
    I took it to KRCS (an Apple Premium Reseller) and they put in another 1GB stick. I took the MM home and booted it up but no chime. I loaded iTunes and songs wouldn't play. I couldn't even turn the volume up or down.
    After taking it back to KRCS they verified all the connections were ok and everything was seated correctly, however the sound still wont work. They ran some hardware diagnostics and they said that it is showing that there is a sound devicde present but it isn't showing any input or output devices once booted in to OS X.
    Has anyone else had this problem? Does anyone have any suggestions as to what could be causing this? Could it be a firmware issue do you think?
    Cheers,
    James

    Morning peeps
    As mentioned I booked my Mac Mini in with an Apple Genius to see if they could shed any light on the problem. So I saw a very helpful guy called James (go figure 8-)) who looked first of all looked to see if there were any reported problems by Apple. He also had a look around the net to see if there were any suggestions but unfortunately this all proved to be fruitless. He then tried booting from a clean drive to see if it was a software issue but this again failed, leaving him a little stumped.
    Finally after a few minutes of looking at verious hardware information he decided to look at the RAM as the Mac was reporting the new 1GB stick I had installed was from a different manufacturer. Again no luck and at this point I knew what was comming...
    "It doesn't look like I will be able to fix the problem today."
    After all his efforts he couldn't seem to solve the issue so the next stange involves replacing some of the hardware. He showed me that he had gone ahead and ordered a new sound board, the ribbin that connects it to the main board and something else which escapes me at the moment, all of which is covered under the waranty.
    So after all that the issue still remains. My Mac Mini is at the Apple Store at the moment and is awaiting the new parts to be installed. James was confident that it could be fixed with these new parts, however he did say that if it couldn't be fixed then Apple would replace it with a new one. He also mentioned that they would try and get the RAM upgrade working once the new hardware was fitted, but if that is unsuccessful he is going to give me the RAM back to get a refund at KRCS.
    I think I have covered everything there - sorry if I started to ramble a bit
    If you need any more information then I would be more than happy to help.
    Cheers,
    James

  • Issues with Sound Clip.getMicrosecondPosition in Mac OS X

    Hi All
    I am trying to implement sound player in Java as following.
    public void play() throws Exception
            AudioInputStream stream = AudioSystem.getAudioInputStream( new FileInputStream(new File(m_path)));
            AudioFormat format = stream.getFormat();
            DataLine.Info info = new DataLine.Info( Clip.class, stream.getFormat(), ((int)stream.getFrameLength()*format.getFrameSize()));
            soundClip = (Clip) AudioSystem.getLine(info);
            soundClip.open(stream);
            soundClip.addLineListener(new LineListener() {
                public void update(LineEvent event) {
                    if (event.getType() == LineEvent.Type.STOP)
                        System.out.println("playcomplete event: " + soundClip.getMicrosecondPosition());
                   soundClip.start();
        }'soundClip' is instance of javax.sound.sampled.Clip.
    After completion of play LineEvent.Type.STOP event is fired.
    Method call soundClip.getMicrosecondPosition() displays the proper values in windows but in Mac OSX it always prints 0.
    Did any face the similar issue?
    Do we have any other approach to know whether the sound play is finished?
    Please help me out
    Thanks in advance
    -Surendhar

    MacOS is notoriously bad for support for JavaSound as Apple (1) rolls their own JVM (2) doesn't like for things to compete with their products, AKA QuickTime...
    Your best bet would be to handle the playing yourself at the Mixer level, and then you'll know you're done playing when you're done writing (plus whatever time it takes to finish playing the buffer, which you can just code a static delay for if you'd like)
    [http://www.jsresources.org/examples/SimpleAudioPlayer.html]

  • Issue with UDMS configuration in SAP PI 7.4

    Hi All
    I am trying to configure User defined search in AE of SAP PI 7.4
    But for some of the interfaces i am facing the issue. I get error stating that Service Interface or Namespace doesnot exist in the set of allowed list.(but SI/Namespace exist in ESR)
    This issue is only happening only with few Interfaces not all.
    I have followed the below link to configure udms in AE.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/803b22cf-ad75-2f10-0790-da055f2e8c0e?overridelayout=true
    Please suggest.
    Thanks and Regards
    Osman Abdul Aziz Jabri

    The surveys functionality was not included for PPC platform in the Service Manager 4.0 release.  There was I beleive a technical issue that prevented it from being included.  It may be included in a future release.
    --Bill

  • Issue with Site Configuration / Load Balancing

    We’re noticing strange behavior with our servers that are configured behind a load balancer. We’ve got two servers with different ports and a load balancer:
    Server1: https://host1:30003/opensso
    Server2: https://host2:30103/opensso
    Load Balancer: https://loadbalancer:30003/opensso
    When we go to the admin console, we can access Server1 without a problem, but the second time we go the load balancer sends us to Server2, and our browser returns a page not found error. We’ve traced the HTTP traffic and discovered that every other time we go to the admin console (the load balancers are configured round robin), Server2 always returns a bogus HTTP found URL. The response it provides is something like https://loadbalancer:*30103*/opensso/UI/Login (just an example).
    The issue here is that it is properly directing the end user’s browser to the load balancer DNS entry. It is not however directing the end user’s browser to the proper port. It seems to sends its own port value to the browser. Obviously when the browser tries to access this URL the Load Balancer rejects the request because it is not listening on port 30103.
    Can Multiple OpenSSO application servers (configured as a site) run from behind a load balancer when they are listening on different ports? If so, why is the application server responding to the user request with its own port, rather than that of the load balancer, yet still providing the DNS hostname entry for the load balancer the whole time.

    Major updates of Muse are targeted to release roughly every quarter. The 1.0 release was in mid-May. The 2.0 release was in mid-August. A fundamental change to image loading would only appear as part of a major update due to the engineering and testing efforts required.
    As provided in your previous thread http://forums.adobe.com/message/4659347#4659347 the only workaround until then is to reduce the number of images in the slideshow.

  • Issue with iphone configuration utility: eap-tls certificate selection

    hello,
    I am a new Apple user so if there's anything obvious, please bear with me. I also tried to search in the forum but didn't find any solution.
    here's my issue:
    I use iphone configuration utility v2.1 for windows. I added 2 certificates(one user cert and one CA cert) under 'credentials'. then i configured one wifi network (eap-tls using the certificate i justed added). then i synced with my phone. everything worked fine so far. however, when I tried to connect to wifi, i got error and found out that iphone was using a certificate issued by IPCU CA instead of the certificate i uploaded.
    this behavior could be corrected by manually change the certificate from wireless setting. however, this has to be done every time I try to connect to wireless network which is quite frustrated. a workaround is to email me the certificate and install it from iphone. but i can't install the CA certificate via this way.
    i am wondering if anyone has similar issue and how to fix this.
    thanks,
    -ns

    the configuration utility doesn't allow you to select the iPCU cert which is kind of a self signed by the software. you could only select the cert that you imported.
    upgraded to ipcu ver 2.2 today and it seems to fix the problem. will monitor it for several days and report back.

  • Issues with sound and scroll function on touchpad on my Satellite A500/026

    Hi
    I have just brought a new A500/026 laptop and when I play music from my ipod I get a small pop static sound on regular intervals during the song... this happens on all my music. I accidentally scroll horizontally across my touhpad and my screen minimises or maximises. I try to locate how I did it but can never seem to get it back to its normal state. There is obviously some kind of function here, can anyone help me with what this is? I have installed the x64 bit version of windows 7.
    Thanks
    Eddie

    Hi
    The touchpad settings are placed in control panel -> mouse
    There you will find the additional tab which would allows you to access the touchpad properties.
    As far as I know the touchpad properties contains a lot of different options which allows you to configure the scroll function, to enable and to assign different actions to the touchpad corners, etc
    Check it!

Maybe you are looking for