Issue with status of data information in Bex analyzer report

Hi BI gurus,
One of the queries showing older date for the "status of data" information in the report of Bex Analyzer. I have tried to correct it in Bex analyzer by removing existing Text information element and adding a new Text element in the Bex Analyzer designer for the query. But it doesn't worked out as the changes made to the query through Bex Analyzer are only being saved as a local work book rather than reflecting to the query. Please suggest me with some options to resolve this issue and give any Idea to correct the "Status of data" in the Bex Query designer.

Hi Aditya
This is a common problem faced by users when reporting on Multi-Provider.
In my project what I did to overcome this is to run a Fake DTP to the cube whose status is creating problem.
Like , if under MultiPro I have a planning cube which is only updated monthly but all the actual cubes updated daily. In this case create a DTP under Plan cube with some impossible selection condition ( like fiscal year 2099). This will bring 0 records to planning cube ( and thereby not impacting the data) but will update the last loading time.
Regards
Anindya

Similar Messages

Issue with Ord Start Date

Hi,
I am having issue with Ord Start Date.
When i create XYZ Asset now when i do the acquasation for that new asset. Example: Using FB01 i enter todays date and i do the posting.
Now when i go to DEP Area TAB for the DEP Key (M200) - The Ord Dep Start Date is 15 Dec 2010.
For this DEP Key Period Control Methods (T code - AFAMP) - Acquisation Entered is ( 6 that is - at the start of year) and the Period Control is ( T code - OAVS) (4 that is - First year convention at half year start date).
Our client is using the fiscal year as 1 June 2010 to 31 May 2011.
So when i do acquistion for the asset as per the period contol the Ord Dep Start Date should be 1 Dec 2010, but here it is talking 15 Dec 2010.
Why is system talking 15 days more.
Regards.

Hi
Which Fiscal year variant are you using??
Did you maintain it in OAVH? Copy the existing entry in OAVH for K4 to your Fisc Yr var and try again
And also, 04 does not figure for Acquisitions in AFAMP under 0004.... Whatever you specify in OAVH must also be a part of AFAMP
Regards
Ajay M
Edited by: Ajay Maheshwari on Oct 28, 2010 2:31 PM

Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013

Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013
Newform.aspx of list:-
Custom List is not saving data sometimes in the new form after 15 minutes and only blank entry record got created without saving data, even though some columns are mandatory fields?

Hello dcakumar,
Sounds like a strang issue. If you can reproduce this can you see some errors in the ULS logs?
- Dennis | Netherlands | Blog |
Twitter

BEx Analyzer report "New Formula", "Scaling Factor" property not working

Hi Experts,
I have created a New Formula(Ex:- Dispatches * 2) in BEx Analyzer report. The result of the "New Formula" is 2000. When I maintain Scaling Factor as "1000" to the New Formula properties, the result should be 2 but here 2000 is coming again.
When I maintain this property to the existing keyfigure in Analyzer report, it is working fine.
Please help me in this whether Scaling Factor can be applied to the New Formula or not in BEx Analyzer report. If it works, what changes we have to make to the New formula.
SAPKW73010 is applied already to SAP BW-730
Please see the attachment.

Sree,
Is the variable ABC the new one that you've created with Scaling factor setting given? The message you get on doing a syntax check on the query indicates that settings are ignored for use beyond the query.
And if this is the case, this is a known issue.
However such settings will work on existing keyfigures as it is in your case.
What you can hence do for this new variable is that if you are developing reports on top of this bex query, you can make the scaling factor setting at the report level.
Let me know if this works for you.
Regards,
Srilakshmi B

Publishing BEX Analyzer reports

Hi,
Is it possible to pubish BEX Analyzer reports (through Broadcast mail) in BI 7.0?

http://help.sap.com/saphelp_nw04/helpdata/en/84/30984076b84063e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/7b/7998403de08368e10000000a1550b0/content.htm
Please go through the links.
Hope this would help you.

Issue with time sheet data source

Hi All,
We are on ECC 5.0.
I am trying to load CATS timesheet data into BW thorugh data sources 0CA_TS_1 (approved time). This data source fetches data from CATSDB table.
In CATSDB there is a good amount of data with Status '30' i.e. 'Approved'.
However on running RSA3 checker this datasource is returning 0 records.
The only SAP note most relevant was 509592. But it is valid for older versions.
The ECC HR is on Level 10 and support pack SAPKE50010.
This issue has been unresolved in previous threads.
Please suggest any solution. Its urgent. Points for sure.
Thanks
Vishno

Hi Guillaume
Thanks for the reply
I had a glimpse on above link.
1) Above link says need to perform below steps. Where we need to run below steps (SQL Server or AD Server)
Sorry for asking basic question
Click Start, click Run, type Adsiedit.msc, and then click
OK.
In the ADSI Edit snap-in, expand Domain [<var>DomainName</var>], expand
DC= <var>RootDomainName</var>, expand CN=Users, right-click
CN= <var>AccountName</var>, and then click Properties.
In the CN= <var>AccountName</var> Properties dialog box, click the
Security tab.
On the Security tab, click Advanced.
In the Advanced Security Settings dialog box, make sure that
SELF is listed under Permission entries.
2) Link talks about Windows Server 2000 version. Is this applicable for 2008 ?
Regards
Santosh

Problems with dynamic data slices and BEx Analyzer

Hello experts,
we use a data slice to lock released data.
This data slice contains an exit-variable which selects all plan that are already released out of a ABAP dictionary table.
The user can release data via planning function. He can start this function with a button in a BEx workbook.
He use the same workbook for insert planning data.
the problem is:
when a user releases data, the value of the exit variable in our data slice changes but the data slice 9999 seems to be NOT generated with the new value. the reuslt is, that the user can still change released data.
the data slice is just new generated after logout and login again not after refresh the query.
Is there a possibility to force the system to generate data slice 9999 with the actual value of the exit variable? maybe a function module or method?
We have this problem just in BEx Analyzer. In Web Reporting everything works fine and the data is locked by the data slice after refresh.
Thank you
Johannes

Hallo Johannes,
if you want to have this kind of behaviour you need to go for a data slice of type exit. You will find some information about this in the Planning forum.
The data slice is instantiated once, but when you release the data you need to call a method in your exit data slice which rereads the values. This is a rough idea how this could be done.
Regards Matthias Nutt
SAP Consulting Switzerland

Issues with 4.1 Data Upload

I've got some issues with the new feature 'data upload' in 4.1. I had already made the pages and the data loading and it worked perfect. Now a new column was added to my data loading table and I have to add a new table lookup for this column. Everything is set up like it has to be. I've got 4 table lookups. When I try to upload some data and indicate the table columns to the data, I've always get the error: Failed to retrieve the lookup value. There is no problem when I do a data load where he only have to retrieve one column from the lookup table, when he has to retrieve data from more tables for more columns, I always get the FAILED message. Does anyone know the problem of this situation? I already tried to make a totally new data loading, but this also failed to do the job.

Hi Ellenvanhees,
I dont think the number of lookups that you defined is an issue here. If possible try to share more details about your data and tables. The few things that come to my mind are probably your data.
But if you are able to do one by one lookup without problem then I think your upload is failing due to null values. The current status of data upload feature returns a failed lookup even if a null value was to be uploaded. This is a bug #13582661 and has been fixed for the future release.
Patrick

Issue with 0hrposition master data

We are extracting data from SAP using 0HRPOSITION_ATTR datasource. I noticed that data is not maintained correctly in master data tables in BW and giving us incorrect results in reporting. Consider below mentioned scenario:
Position A created as vacant on 04/01/2006 with start date (BEGDA/ Valid from) as 04/01/2006 and End date (ENDDA/ Valid to) as 12/31/9999 and is vacant. Below mentioned entry is shown under maintain master data for 0HRPOSITION in BW:
Position Valid To Valid From Position Vacant
A 03/31/2006 01/01/1000
A 12/31/9999 04/01/2006 X
Position A is now delimited on 09/15/2006 as its no more required. In SAP, position has record only from 04/01/2006 till 09/15/2006 as vacant. When record is extracted in BW, it creates below mentioned entry in master data table.
Position Valid To Valid From Position Vacant
A 03/31/2006 01/01/1000
A 09/15/2006 04/01/2006 X
<b>A 12/31/9999 09/16/2006 X</b>
Entry 09/16- 12/31 is incorrect as position doesnt exist for this duration. If we report on 0HRPOSTION with key date as 09/30/2006, it shows position A as vacant though position no longer exists.
Has anyone come across this situation. any help is greatly appreciated.
Kamal
P.S: Milind Rane...I was searching through the forums and came across your post.I would appreciate if you could let me know how you solved this issue...
Message was edited by:
Kamal K

HI KK
I have a similar issue. Can you please let me know how this Issue with 0HRPOSITION_ATTR extractor was resolved. In my case i have incorrect data in BW when reporting is done. THrough the extractor untill the PSA i have the correct records coming but in the master data 0HRPOSITION i have incorrect records.
Please help.
Thanks
Hari
Message was edited by:
SAPCOOL

Issue with the Posting Date of the Purchase Order.

Hi All,
There are fields in BW like SSL1: Time OK, SSL2: Qty OK, SSL3: Time & Qty Ok, SSL4: Days Late (Routines are written to calculate). These fields will indicate whether the delivery against a GR is OK or not with respect to Time, Quantity and the No. of Days..
But here the issue I am facing is
If there is only1 delivery/ GR against a single item the calculation in BW are correct - i.e. for a particular PO if there is only one delivery the above fields like SSL1: Time Ok, SSL2: Qty OK will show like the delivery is done within the specified time and everything is OK (in case if it is delivered within the allotted time)
But if there are multiple deliveries or multiple GR's posted for one PO item, the calculations are going wrong i.e. even if the delivery is done well within the specified time it is showing the wrong calculations like it is delievered too late. Because in this case the earlier dates are overwritten.
Can anyone throw me some light on how can I go about solving this issue.
I am thinking of declaring the Posting Date as the KeyField of the DSO as of now it is a Data field I also want to know the impact of assigning this as a Keyfield.
Thanks in advance,
Prasapbi

Hi,
As I understand, you have a DSO based on Purchase Order and your key field is PO and its line item. The problem as you stated will always be there if you have multiple deliveries/GRs created for a single line item because the system will overwrite the entries for same key.
Problem with adding Posting date as keyfield will be that then your key will be PO-PO Lineitem-Date. When PO will be created, the Posting date will be blank(correct me here if I am wrong), therefore you will have one entry for same PO-line item combination. One without date and other with date, which again would be incorrect. If my assumption about Posting date was wrong, even then your data may not be correct because then you may have many entries with same posting date which again would overwrite each other.
If there is any direct link between PO line item and number of deliveries that will get created for them, then you can bring that field in DSO as keyfield. But I don't think there is any such field.
Looking at your report requirement, I would suggest that you make a DSO based on Goods Receipts and then calculate these keyfigures by comparing the dates between GR posting date and PO line item date.
Else you can change the way your datasource works(if its generic one based on function module). Since your main requirement is to check whether the GR posting date has met your SLA or not, you should fetch all the details only when GR is created and make your key field as PO-PO Line item-GR

Issue with setting Planning Data Source

I keep getting error when I try to set up the data source
the Oracle database = orcl
The data base schema EPMAPLAN
Password = EPMAPLAN
when i log on i to Oracle Database
Sys as SYSDBA
Password = Password01
so what what should be the Database Source Name = ORCL Correct ????
Server = win-392h1l307n1 or localhost
Databse = ORCL
User Name = ????????????
Password = ?????????
I try all the combinations
Please advise

Duplicate post - Issue with setting up planning data source
Cheers
John
http://john-goodwin.blogspot.com/

Issues with processin the data in Adpater engine

Dear experts,
we are facing the below mention issues while processing the data Please let me know what we can do to resolve the issue.
"Error while reading ID of own business system from the SLD for system DX1 and client 500 Internal error in Landscape Directory"
regards
shankar

Hi,
As suggested by Aashish, you can go through.
It seems to like problem with SLD. It might be wrongly configured. Please check with the T.code SLDAPICUST
Regards,
P.Rajesh

Issue with extraction of data to Delta Queue

Hi All,
Background:- One LO Data source each from Application 8, 11 and 12 was active in LBWE. Update method was specified as Queued Delta. However this Data source was not utilized to pull any data to any of the Global BI Systems. These data sources did not exist in RSA7. There was a business requirement that these Data sources were to be enhanced, along with this other Data sources under these applications were also required to be enhanced. There were entries in LBWQ which used to get dumped out at regular interval by running the SAP Standard Collector jobs. Since no Delta was initialized for these extractors, no entries were passed on to RSA7.
Problem:- We did not clear the entries or took a downtime before sending transports and now the collector job is dumping saying the structures have changed, which is correct. I believe we wonu2019t require any data sitting in LBWQ as none of the extractors had any entry in RSA7. This problem is happening only in our Production system and we did not face this problem in any other system even though there were entries existing in LBWQ.
What is the solution to fix this? Is the only option now is to delete the Queue from LBWQ and then run the collector job or is there any other way and will that fix the problem?

Hi Victor,
As u said that u were not using the DS for Application 8,11 and 12.. in this case I believe that u dont have any data in BW as well(Historical data). As u have enhanced these data sources with the new requirement, I hope u must have changed the structures in BW side as well to load the data to the newly added fields.
So in ur case u need to replicate the DS in BW and then activate the Transfer structure for all of them.
And then flushout the LBWQ for all those 3 applications and then take the setup tables fill for the same (but this requires the down time in prod to make sure that u wont loose any records).
Before setup check SM13 whether u have any blocked entries for all these entries if so then u can delete them as well before taking the setup.
Once the setup is done then u can take Init without data transfer and then take repair full loads in BW for the targets.(Activate ur V3 once the init- without data transfer took place for the regular deltas) .
Thanks
Assign points if this helps

Need to provide certain informations within BEX Analyzer

Hi folks,
we need to provide certain information to users being connected over BEX Analyzer ...
Is there any way to write a custom help text or to provide some kind of info box or pop up or something similar to the info box on the SAP logon screen or anything else that can be used to inform users of certain things ?
Tricky thing is, that we don't want a permanent pop up appearing every time the user logs on to the analyzer. It's supposed to be more like something that the user can open every time he wants to look up the information or alternatively a permanent info text somewhere on the screen or maybe under the system information that one can open up under Bex Analyzer ...
Or how about adding a new (custom) button to the BEX Toolbar opening an information window ? Is that possible ?
Any idea what could be done to accomplish this ?
Regards
Thomas
Edited by: Thomas Schmitt on Jul 8, 2009 10:52 AM

Hi,
Is it an idea to make one or more Excel Comment fields in your template
Like directly under your company logo using a row with Excel cells with subjectnames and adding the documentation as comments in there?
Udo

Missing Row Data on BEX Analyzer Report

Hi, been a while since I used BEX Analyzer. Have a BEX Query that we added a row of data to and the results show the row populated in Query Designer. However, when I open up a workbook in BEX analyzer that uses that query, the row still does not show up. What do I have to do to make the row of data show up?
Thanks.

Hi Keith,
I am not sitting in front of system now,but there are three checks which needs to be done. there is one refresh on every opening option also which needs to be selected.
Thanks and regards

Issue with status of data information in Bex analyzer report

Similar Messages

Maybe you are looking for