Issue with storing authorization information, trying to start Home Sharing

I am currently attempting to set 'Home Sharing' up on my iTunes so that I will be able to share music and videos between two computers in my household. Both computers are on the same network, my home network. When I attempt to start Home Sharing, the following phrase pops up after putting in my iTunes username and password:
"There was an error storing your authorization information on this computer." (followed by other writing)
If anyone can help me to correct this issue and to start my Home Sharing it would be greatly appreciated.

Hello \'CUSE FAN,
I would recommend taking a look through the following article.
Troubleshooting Home Sharing
http://support.apple.com/kb/TS2972
Cheers,
Allen

Similar Messages

Getting an error 5506 when I try to start home sharing

I just tried to start home sharing. I get a 5506 error. What do I do?

Welcome to the Apple Community.
Try verifying your account and/or re-authorising your computer.
The following article(s) may help you.
Troubleshooting Security Software

Issues with Analysis Authorization on Infoset

Hi all
We are facing an issue with Analysis Authorization on Infoset, it doesnt seem to throw authorization error when we access a record that is outside the authorization. We tried to use the same authorization set up from the same user we try to access the a record that is outside the authorization it behaves correctly.
Here is my setup
0CRM_MKTELM__0CRMCAMPTYP = ZA11
0TCAACTVT = *
0TCAIPROV = *
0TCAVALID = *
When I tried to access ZA12 it should throw an authorization error but for infoset it doesnt seem to work. Is there anything that we should take note for Infoset?

Hi Chee,
I am getting similar issue.
I believe navigational attribute was already a authorization relevant in your case.
What and where did you set it as authorization relevant to make it work on infosets.
Regards,
Ramz

Issues with Analysis Authorization checks in APO

Hi Friends,
I am facing an issue with Analysis authorization checks in APO.
We have setup user access based on Management Entity (Analysis authorization - AGMMGTENT and 0TCAACTVT) and core APO authorizations (based on the work profile - e.g: Demand Planner).
Scenario: Consider User A has access to India and Australia Management Entities with 0TCAACTVT - *
This user also has display access to all management Entities (AGMMGTENT - * and 0TCAACTVT - 03). This scenario works very well in Quality where the RSECADMIN trace shows check on both Characteristics. However in Production the RSECADMIN trace shows up only against AGMMGTENT (*) and by default takes 0TCAACTVT as (*).
In Quality the Characteristics that get checked are as below : and it works as expected. Display access for Management Entities that are supposed to be displayed only and change access to only the Management Entities that it should.
However the Trace for Production shows the following : As a result it is allowing the user to change access to all management Entities. Which is not desirable..
Resultant trace results are as below: This should not happen..
I have compared all Analysis Authorizations and it is same across both Instances. The Demand planner access is consistent too..
Will it be possible for you to advise on what could I be missing.

Hi All,
If it helps, in Quality: the Authorization checks are listed as: Subselection (Technical SUBNR) 1
while in Production it checks Subselection (Technical SUBNR) 1 in one place, however where it fails - the check happens as Subselection (Technical SUBNR) 0.
Is there a way we can change this to SUBNR 1. Is there any table entry that I can look at to check if the Authorization check is functioning incorrectly..
Please advise.. Thanks..
Regards,
Prakash

Issue with BAPI_ACC_***_TRANSFER_POST (when trying to execute as per ABT1N)

Hello experts,
For this thread, please check the following link:
[Issue with BAPI_ACC_***_TRANSFER_POST (when trying to execute as per ABT1N);
Thanks and Regards,
Daniel.

Hi Experts,
The question has been answered as per the following "link":
[Issue with BAPI_ACC_***_TRANSFER_POST (when trying to execute as per ABT1N);
Daniel

HT202213 Trying to activate home sharing with new iTunes update, says error #5506, any ideas? Worked great before this update!

I'm trying to use home sharing with the latest iTunes update. Keep getting error message 5506-any idea how to resolve this error and share at home?

Well, I tried a few other things and one worked but again just the first time I tried connecting to the desktop PC with iTunes. I flashed my router with the latest update and the ATV2 could see the iTunes library and I was able to play media. Later in the day I was going to show off to my daughter that I had fixed it and, to my dismay, no go. I tried opening the suggested ports but no luck.
I then tried loading iTunes on a Win7 laptop and it works perfectly with the ATV2. Both the laptop and the ATV2 are connected to the router wirelessly while the Desktop is connected to the router by Ethernet. Not sure if this is part of the issue as it sounds like this didn't work for others. The only other difference between the laptop and desktop is that the desktop has Win7 SP1 loaded while the laptop does not; now I'm scarred to load it though I don't think that's the issue. All in all, a very vexing situation. Hopefully Apple comes up with a solution soon.

Just started home sharing with another computer, if I sync my iphone will it load my music to the newly shared computer?

I just started home sharing for the first time. I just wanted to know if i sync my iphone with it will it load my music from the other computer onto the newly shared computer. Or are they supposed to have diffrent stuff in them? ( if so, if i sync my phone to the one with nothing will i loose the music thats on it?)

The computer you sync your phone with has no relevance to home sharing. Home sharing between the 2 computers allows you to see, play and import items on the second computer from the first and vice versa.
Whichever computer you sync your phone with, new purchases will be added to that computer and therefore be able to be seen, played and imported by the other.
I rather thought that's what you wanted, it can be realised without changing the computer you sync your phone to. Of course if you want to change the computer your phone syncs with, you can, you just don't need to, to get the items on it onto both computers.

Mac won't connect to Windows when trying to use Home Sharing

Hi, I'm having trouble with my Home Sharing on iTunes.
I recently got a new Macbook Pro - it's all up to date and I'm also running the latest version of iTunes on it.
I've been trying to move my music over to this computer from my old Windows PC via Home Sharing. However, my windows will connect to the iTunes on my Mac, but the Mac will not do the same with my Windows if this makes sense: it shows a loading screen but then just goes back to its own library, but still says that the windows' library is available.
I've tried restarting both computers; turning Home Sharing on and off; authorising and deauthorising both but to no avail. My windows is also running an up to date iTunes.
I'd be grateful for any advice, thanks in advance.

Hi there issie123,
I would recommend taking a look at the troubleshooting steps Home Sharing issues found in the article below.
Troubleshooting Home Sharing
-Griff W.

Sharing does not show up on the side column ... tried turning off home sharing then turning it back on ... shared shows up untell i click "done " then its gone.

sharing does not show up on the side column ... tried turning off home sharing then turning it back on ... shared shows up untell i click "done " then its gone.

Yes, I have also tried and failed when setting up Home Sharing. I have followed the instruction given on the Support website, but this is all I see:
Both computers are on the same local network and both allow Home Sharing and are signed in with the same user name. I am not sure what else to do. Any suggestions?

I am trying to do home sharing

I am trying to do home sharing and I have follwed the instructions but where it says SHARED in the side tool bar under it it says home sharing with like a little house with a music note inside it but that is all. Where am I going wrong....please help

Hi, See These Links for Home Sharing
Understanding
http://support.apple.com/kb/HT3819
Troubleshooting
http://support.apple.com/kb/TS2972
How to
http://support.apple.com/kb/HT2688

Re- trying to do home sharing but says my computer is de-authorized

I am trying to do home sharing but every time i try to import a song, it says my computer is "de-authorized" so i re-authorized it, but it still says the same thing!!!

try if this support article helps.
also check out Troubleshooting Home Sharing.

HT4367 I am trying to activate home sharing but I am getting error code 5506. ID not recognized.

I am trying to activate home sharing for Apple 2tv, and getting error 5506.My ID is not being recognized. to enable me to share. Yet I can sign.Any answers.

Yes, the store didn't properly activate the card. If the store is nearly then you could try going back and asking them to do so, if it isn't (or if they can't/won't help) then try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

HT3819 what is the best way to set up my childs iphone with apple id and as part of home sharing?

what is the best way to set up my childs iphone with apple id and as part of home sharing?

So do I have to hook up an Ethernet cable to both the Uverse AND my computer from the Time Capsule?
I'm not sure that I understand everything that you want to do and where devices will be located.
The Time Capsule must connect to the "main" Uverse router using a permanent, wired Ethernet cable connection. An Ethernet cable can be run up to 300+ feet with virtually no loss, so you should be able to locate the Time Capsule wherever you want.....unless you have a very large estate.
If you want the Time Capsule to strengthen the wireless signal provided by the Uverse router, then the Time Capsule must be located in the area where you need that additional signal strength.
If I understand your post correctly, you plan to install the Time Capsule in the office? When you do this, you can configure the Time Capsule to create a wireless signal that uses the exact same wireless network name and password as the Uverse wireless network.
That will provide a much stronger signal for your Uverse wireless network in the office area. Hopefully, the bedroom that you mention is close to the office, so it will pick up the stronger wireless signal from the Time Capsule.
The iMac in the office can connect to the Time Capsule using another short Ethernet cable connection, or the iMac can connect using wireless. A wired connection is always preferred, if possible.
At this point, I guess the first question would be.......
Do you have a location for the Time Capsule that will be close to the office....and...the bedroom where you want a stronger wireless signal?

HT3819 How to start home sharing

How to start home sharing in my I pad 2

There is no such thing as home sharing on an iDevice.
Home Sharing is on computers and clearly explained in the document from which the question was posted. Try reading that document.

Having issues with getting SQL Server Express to start services and run.

Good afternoon everyone,
I have been working on a 2012 R2 server getting ready to move databases to new hardware. I had SQL Server Express 2008 R2 running on this server with no issues. I was handed another software package that ran SQL Express 2012 and had to for compatibility
reasons. I have had multiple versions run on Server 2012 before with no issues. This time, not so lucky. When the installer from the updated package put on SQL Express 2012 it completed with errors ( error log posted at the end of post) and
would not allow me to run software. I then tried the db that I had installed on 2008 R2 and it also gave the same error as the 2012 version. IN basic terms the required services attempted to start and shut back down again. I have received
Error 1068 about database handles and error %%945. I know this db has plenty of space and the permissions were added for the Admin account to access both db's. I then uninstalled both versions and tried again, with the same errors listed when
I tried to start the services. I am thinking that a clean install would fix the issue however I am not certain what files/folders/reg entries need to be deleted or modified. I have researched all the errors I can find, however I am very
new with SQL anything so I know I am missing something. I also do not have an "E:" drive on this server (not sure why it is going there). Input would be very welcome as I am not certain where to go from here.
Thanks,
Matt
Error Log follows, server and domain names have been blacked out with ****.
2015-04-15 11:57:55.16 Server Microsoft SQL Server 2012 (SP1) - 11.0.3128.0 (X64)
Dec 28 2012 20:23:12
Copyright (c) Microsoft Corporation
Express Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
2015-04-15 11:57:55.16 Server (c) Microsoft Corporation.
2015-04-15 11:57:55.16 Server All rights reserved.
2015-04-15 11:57:55.16 Server Server process ID is 4104.
2015-04-15 11:57:55.16 Server System Manufacturer: 'HP', System Model: 'ProLiant ML350p Gen8'.
2015-04-15 11:57:55.16 Server Authentication mode is WINDOWS-ONLY.
2015-04-15 11:57:55.16 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\Log\ERRORLOG'.
2015-04-15 11:57:55.17 Server The service account is 'NT AUTHORITY\LOCAL SERVICE'. This is an informational message; no user action is required.
2015-04-15 11:57:55.17 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA\mastlog.ldf
2015-04-15 11:57:55.17 Server Command Line Startup Parameters:
-s "SQLEXPRESS"
2015-04-15 11:57:55.48 Server SQL Server detected 1 sockets with 6 cores per socket and 12 logical processors per socket, 12 total logical processors; using 8 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2015-04-15 11:57:55.48 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2015-04-15 11:57:55.48 Server Detected 8157 MB of RAM. This is an informational message; no user action is required.
2015-04-15 11:57:55.48 Server Using conventional memory in the memory manager.
2015-04-15 11:57:55.68 Server This instance of SQL Server last reported using a process ID of 7840 at 4/15/2015 11:57:47 AM (local) 4/15/2015 3:57:47 PM (UTC). This is an informational message only; no user action is required.
2015-04-15 11:57:55.68 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
only. No user action is required.
2015-04-15 11:57:55.69 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2015-04-15 11:57:55.72 Server Software Usage Metrics is disabled.
2015-04-15 11:57:55.73 spid5s Starting up database 'master'.
2015-04-15 11:57:55.79 spid5s 20 transactions rolled forward in database 'master' (1:0). This is an informational message only. No user action is required.
2015-04-15 11:57:55.79 spid5s 0 transactions rolled back in database 'master' (1:0). This is an informational message only. No user action is required.
2015-04-15 11:57:55.80 Server CLR version v4.0.30319 loaded.
2015-04-15 11:57:55.86 spid5s Service Master Key could not be decrypted using one of its encryptions. See sys.key_encryptions for details.
2015-04-15 11:57:55.89 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2015-04-15 11:57:55.91 spid5s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2015-04-15 11:57:55.91 spid5s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2015-04-15 11:57:55.94 spid5s SQL Trace ID 1 was started by login "sa".
2015-04-15 11:57:55.94 spid5s Server name is '********\SQLEXPRESS'. This is an informational message only. No user action is required.
2015-04-15 11:57:55.96 spid5s Failed to verify Authenticode signature on DLL 'C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\Binn\ftimport.dll'.
2015-04-15 11:57:55.96 spid5s Starting up database 'msdb'.
2015-04-15 11:57:55.96 spid9s Starting up database 'mssqlsystemresource'.
2015-04-15 11:57:55.96 spid5s Error: 17204, Severity: 16, State: 1.
2015-04-15 11:57:55.96 spid5s FCB::Open failed: Could not open file e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBData.mdf for file number 1. OS error: 3(The system cannot find the path specified.).
2015-04-15 11:57:55.96 spid5s Error: 5120, Severity: 16, State: 101.
2015-04-15 11:57:55.96 spid5s Unable to open the physical file "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBData.mdf". Operating system error 3: "3(The system cannot find the path specified.)".
2015-04-15 11:57:55.96 spid5s Error: 17207, Severity: 16, State: 1.
2015-04-15 11:57:55.96 spid5s FileMgr::StartLogFiles: Operating system error 2(The system cannot find the file specified.) occurred while creating or opening file 'e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBLog.ldf'.
Diagnose and correct the operating system error, and retry the operation.
2015-04-15 11:57:55.96 spid5s File activation failure. The physical file name "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBLog.ldf" may be incorrect.
2015-04-15 11:57:55.99 spid9s The resource database build version is 11.00.3000. This is an informational message only. No user action is required.
2015-04-15 11:57:56.02 spid12s A self-generated certificate was successfully loaded for encryption.
2015-04-15 11:57:56.03 spid12s Server is listening on [ 'any' <ipv6> 53345].
2015-04-15 11:57:56.03 spid12s Server is listening on [ 'any' <ipv4> 53345].
2015-04-15 11:57:56.03 spid12s Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\SQLEXPRESS ].
2015-04-15 11:57:56.03 spid12s Server named pipe provider is ready to accept connection on [ \\.\pipe\MSSQL$SQLEXPRESS\sql\query ].
2015-04-15 11:57:56.04 spid12s Dedicated administrator connection support was not started because it is disabled on this edition of SQL Server. If you want to use a dedicated administrator connection, restart SQL Server using the trace flag 7806.
This is an informational message only. No user action is required.
2015-04-15 11:57:56.04 Server SQL Server is attempting to register a Service Principal Name (SPN) for the SQL Server service. Kerberos authentication will not be possible until a SPN is registered for the SQL Server service. This is an informational
message. No user action is required.
2015-04-15 11:57:56.04 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/********.****.local:SQLEXPRESS ] for the SQL Server service. Windows return code: 0xffffffff, state: 53.
Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been
manually registered.
2015-04-15 11:57:56.04 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/********.****.local:53345 ] for the SQL Server service. Windows return code: 0xffffffff, state: 53. Failure
to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually
registered.
2015-04-15 11:57:56.09 spid9s Starting up database 'model'.
2015-04-15 11:57:56.10 spid9s Error: 17204, Severity: 16, State: 1.
2015-04-15 11:57:56.10 spid9s FCB::Open failed: Could not open file e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\model.mdf for file number 1. OS error: 3(The system cannot find the path specified.).
2015-04-15 11:57:56.10 spid9s Error: 5120, Severity: 16, State: 101.
2015-04-15 11:57:56.10 spid9s Unable to open the physical file "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\model.mdf". Operating system error 3: "3(The system cannot find the path specified.)".
2015-04-15 11:57:56.10 spid9s Error: 17207, Severity: 16, State: 1.
2015-04-15 11:57:56.10 spid9s FileMgr::StartLogFiles: Operating system error 2(The system cannot find the file specified.) occurred while creating or opening file 'e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\modellog.ldf'.
Diagnose and correct the operating system error, and retry the operation.
2015-04-15 11:57:56.10 spid9s File activation failure. The physical file name "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\modellog.ldf" may be incorrect.
2015-04-15 11:57:56.10 spid9s Error: 945, Severity: 14, State: 2.
2015-04-15 11:57:56.10 spid9s Database 'model' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
2015-04-15 11:57:56.10 spid9s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.

Hi HMLunger,
Did you install the SQL Server instance successfully? If not, please help to post the summary and detail logs for analysis. By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
However, if you fail to start SQL Server Express service after successfully installing SQL Server,
you might have to change the paths of the files by running the following scripts from the command prompt. For more details, please review this similar
thread.
NET START MSSQL$SQLEXPRESS /f /T3608
SQLCMD -S .\SQLEXPRESS
ALTER DATABASE model MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
ALTER DATABASE model MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
go
exit;
ALTER DATABASE msdb MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
ALTER DATABASE msdb MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
NET STOP MSSQL$SQLEXPRESS
In addition, you can follow the steps in this KB article to uninstall SQL Server.
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Issue with storing authorization information, trying to start Home Sharing

Similar Messages

Maybe you are looking for