Issue with Sub-Con PO (543 O movement)

Hi All,
I find that system is not posting 543 O movement for individual components when i do a GR for sub-con PO Material. I am following the steps below.
1. GI of components to Sub-Con PO thru' ME2o (System records a 541 movement for the components).
2. GR of Sub-Con PO thru' MB01 (101 mvt.) But the system does not post a 543 O movement for the components.
3. Also in ME2o when i check for these components, i notice the output still shows these components, although the stock is '0'.
Await inputs.
Vivek

Hi All,
Sorry for the late response. But after a detailed study, i notice this error is because, the user has actually transfered items which have bulk material indicator using MB1B by mistake, so when a GR for the material is done, system is not considering these bulk materials & hence no 543 O is posted.
Also these stocks are shown as lying with the vendor.
Now the dilemma is how to ensure these items are actually transferred to the respective finished assy & ensure that the costing of the assy is revised. If it is not possible, can i just post a 542 & reverse back these postings, will it have any financial impact? In terms of costing of the finished assembly which we received from sub-contractor will it have any impact?
Also would like to know any standard tx which displays stock @ sub-contractor by PO or any user-exits available for this?
Anyone to help on this?
Edited by: Vivek on May 7, 2008 3:02 PM

Similar Messages

MB1B - Bulk material issue for sub-con PO

Hi All,
For a subcon PO, the user has by mistake done a transfer of a bulk material using MB1B. The vendor has used this material as well. Now when i receive the material from the vendor, this bulk material is not consumed by this PO with a 543 mvt, which is normal.
But the issue is, this item is now shown as lying with sub-contractor, & there is no way i can post a 543. I can post a 542 & reverse the issue, but then how do i treat this stock?
Hope my question is clear, await inputs.
Regards,
Vivek

Hi Vivek,
Thanks for your explanation.
Still I have doubts. Are you speaking of bulk material in terms of BOM?
I haven't got experience with them BUT SAP help definetly says that bulk material is not 'withdrawn specially for the order' and 'a bulk material item is only for information'.
http://help.sap.com/saphelp_46c/helpdata/en/b1/c043f4439a11d189410000e829fbbd/frameset.htm
Considering this, we cannot expect consumption by mvt 543 of bulk material when GR against subcon-PO takes place.
It's only my opinion so please think about this yourself as well.
BR
Csaba
Re: Items with Bulk Indiactor in subcontracted assembly.
http://www.sapfans.com/forums/viewtopic.php?f=9&t=289342&p=869693&hilit=bulkmaterialconsumption#p869693
http://www.sapfans.com/forums/viewtopic.php?f=6&t=310542&p=938766&hilit=bulk+material#p938766

Issue in Sub con PO

Dear All,
I am facing the issue
User created the Subcon PO with the two bill materail.
Next he for to issue materail to subcontractor
then he made GR for that particular PO.
I checked the GR document there is no BOM materail that child item Mvt 543 .
How system is allwing . what i ahve todo now.... if the BOM is there for that particular materail.
Regards
Murugan

Dear Umakanth,
Yes i check in that parent materail only is there that 101 mvt only no child item is there .
That is Mvt 543 is niot there. But BOM is there for the Materail.
Why the System is not picked the BOM items
Regards
Murugan
Edited by: murugan jayaraman on Jan 3, 2011 9:09 AM
Edited by: murugan jayaraman on Jan 3, 2011 9:09 AM

Apple tv....house is wifi. issue with streaming as thrown off during movies

I have wifi in my house. My desk top is upstairs and the apple tv box is downstairs. We can not seem to be able to watch a complete movie or tv show. It shows buffering before it starts and then 1/3 of the way through we are thrown off.
Should we get a second modem that is not wifi for the tv and apple tv box? Will a second modem interfere with the wifi system that we have in our house? We are with BELL CANADA for our internet and Rogers for our TV. Our goal is to get rid of cable all together.
Thanks

Welcome to the Apple Community.
How far away from the router are both devices. Your issue might be distance but could also be interference.

Issue with in the cloud feature for movies/tv

Im having an issue on my macbook pro 2011 moutain lion. it doesn't have the little cloud icon right beside the drop down list. It was work great in version 11 and since upgrading it isn't working. I checked if it was working on my windows pc and another macbook pro and both those machines worked for the movies and tv show in the cloud feature on the newest version of Itunes. Im stumped what to do to resolve it. any help would be appreciated.

First of all, are you using webcenter 11.1.1.3 or 11.1.1.4?
Judging from your explenation i should say you are using .3 because in the later releases you don't need to configure adf security anymore.
If you are using .3 than you should complete following steps:
http://download.oracle.com/docs/cd/E14571_01/webcenter.1111/e10148/jpsdg_page_editor_mds.htm#CHDBHBDA

I've been using Firefox for some time now. but i've been having all kind of issues with it and am considering a move to Google Chrome. i don't want to do this, but for example: your site tells me i'm running version 3.6.10, when i am running 4.0.1...huh?

i play restaurant city on Facebook, among other things, but the game crashed every time i breathed on it. somebody suggested Chrome, so i switched to it...just for that game.
today, i started having trouble with Twitter (the new one), sending messages & tweets. i've switched to the old one & it works, but again suggested that i go to Chrome for this & all my needs.
i don't want to, but i will if things like this keep happening.

You can use the Tab key to select a search engine on the bottom bar and press Enter to use the search engine to do the search.
*https://support.mozilla.org/kb/Search+bar
In the current Firefox 34 release there is a new "one-off" search bar.
This search bar doesn't show the name of the search engine and a logo.
You can type one letter to make a drop-down list appear where you can see suggestions and see the used search engine and that also has bar at the bottom where you can select other search engines that are enabled via the Search tab in Options/Preferences.
You can use the Tab key to select one of the other available search engines and press the Enter key to search with the selected search engine.
Click the search engine icon and click "Change Search Settings" to open the Search tab in Options/Preferences (positioned between Tabs and Content) to select the default search engine and select which search engines to show in the search bar drop-down list that opens when you start typing search terms.

Issues with BW conn. while upgrading source system from R/3 4.6 to ECC 6.0

Hello
We are upgrading our existing R/3 4.6 system to an ECC 6.0 system. In this regard, I have a few questions concerning R/3 to BW extractions.
Question 1: If we have a PROD BW system PB1 mapped to a PROD 4.6 R/3 system PR1. And then we make a copy of PB1 and call it DB1. Will we get all the transfer rules mapped between DB1 and PR1 automatically.. or do we need to re-create all the transfer rules again?
Question 2: Lets say we now want to connect our ECC 6.0 DEV system ie DE1 to DB1, do we need to re-create all the transfer rules between these 2 clients?
Thanks.
Srinivas.

Hi Srinivas,
questions 1:
no need to create again...they will link up that..it is nothing but Mirror concept...
question 2 :
This one laso no need to craeted....
So your issue is solved,post me if you have any furthur...
Regards
Srinivas

Issue with sub template

<?template:Header?><?param:ReportName;string(‘My Report’)?>
<?$ReportName?> in the header region
and <?end header?>
<?template:Footer?>
<?end Footer?>
in the footer
<?call@inlines:Header?> <?with-param:ReportName;string(‘Employee Report’)?><?end call?>
this in the calling template..but seems to be not working
please help me out

Use
<?template:Header?><?param:ReportName;string(‘My Report’)?>
<?$ReportName?> in the header region
<?end template?>
<?template:Footer?>
<?end template?>
It should be <?end template?>
Also, have the import statement at the top of the file, before anything else.

Issue with posting change note processing using movement type 309

while processing Posting change note using transaction LT05, i am getting error 'Available quantity is less than selected quantity'. we need the quantity in posting change note to be picked from same storage bin from where it has been picked during transfer posting using 309. currently, it is showing all storage bins in ascending order for selection while Posting change note posting.
if we reqwhile mass porcessing of Posting change note using LSMW, it pickes the 1st storage bin. if 1st storage bin quantity is less than selected quantity of PCN then it is showing above error.

Hi Vishal,
The materials are managed by batch? Please check the batches of the material in the different storage bins. SAP asign the storage bin taking into account the material batch number and the oldest quant.
When the storage bin is not indicated, SAP looks at the batch number, and goes to the storage bin where this batch for the material is allocated. If SAP find more than one storage bin, SAP consumes from the batch that has the oldest quant.
I really dont understand deeply your question.
Hope it helps.
Regards
Enzo

Issues with Subcon PO

Hi MM Gurus,
I have a peculiar issue in sub con PO. The PO 45xxxxxxx created for material 501-XXXX-XX for 100 Quantites. 541 mvt made for all the 100 Quantites and 543 (101) made only for 80 Quantites. After this PO order Quantity changed from 100 to 80 and the Invoice also processed for 80. The PO was two years old and it has been archived.
Currently in MD04 it shows that 20 numbers still available at sub contractor end. MBLB doesn't show anything.
Please help me to fix the Issue.
Regards,
Senthil

Hi
you can retreve this PO from archive and you can post for remaining 20 qty then you can archive this alone using SARA ( for archive)
With regards
Pavan

Reg:Consumable material in Sub con scenario

Hi experts,
I have an issue in sub-con scenario.For consumable material we are not maintained in BOM .For this how to map in sap for inventory purpose or how to knock of the consumables stock at sub- con place.Kindly suggest me .
Thanks in advance
vichu

Hi Experts,
For finished goods i maintained BOM,for consumable item not maintained in BOM,now i want to issue the consumable item to sub -con & it should be accountable or it should show that has been consumed in that finh goods .For this pls suggest me & i am in a urgency.
Thanks in advance
vichu

I have noticed an issue with utilizing the "stream" function on iOS 7. If you choose to just stream the movie by hitting the play button it seems to actually start downloading (which is fine) but if you are say halfway thru the movie and stop you can clea

I have noticed an issue with utilizing the “stream” function on iOS 7. If you choose to just stream the movie by hitting the play button it seems to actually start downloading (which is fine) but if you are say halfway thru the movie and stop you can clearly see that storage has been reduced under the usage, yet under the “videos” tab it still states “No Data” the only way to delete what you have partially downloaded is to fully download the video, which is fine but there is no way to tell what videos have been partially downloaded (I.e which occurs a lot when your child switches between movies using the so called “stream” function). This becomes troublesome once the capacity of the ipad is almost met and you have no way to delete this data since you may have several videos that have started to be viewed (hence partially downloaded). Apple needs to somehow make it truly streaming or provide an update so the storage can be managed. The only way I have been able to remove partially downloaded videos is by doing a total software restore. (The video data that is in question when connected to my MacBook shows up in iTunes as “other”) if you have any insight into this issue it would be greatly appreciated. Thanks.

Here are the screenshots for what it's worth.
Not sure why I can't post them in the original post. 
Mod edit: See [https://bugzilla.mozilla.org/show_bug.cgi?id=718813 bug 718813]
'''Again, when I set my DNS server to automatically detect the servers both problems disappear and I have no issues at all.'''
IMO opendns is either doing this on purpose (unlikely) or they're under some sort of attack/being used to attack the specific torrent sites although I'm open to other explanations. I believe using the automatic setting for DNS is using my own ISP's DNS servers (which again, work fine... but still...)
I'd rather not use Google's public DNS servers as Google is to commercial these days and I think there's potential privacy issues.
'''Again I have changed the setting for DNS servers back and forth several times to duplicate/verify the issue(s)... and the issues only happen with the opendns servers.'''

I bought a few songs on itunes but the songs appear in grey letters and I cannot transfer them to my iphone. I've bought/rented TV shows/movies since so there isn't an issue with my account. How can I get these newly purchased songs onto my iphone?

I bought a few songs on itunes but the songs appear in grey letters and I cannot transfer them to my iphone. I've bought/rented TV shows/movies since so there isn't an issue with my account. How can I get these newly purchased songs onto my iphone?

You made a purchase and exhausted the credit on your card before it processed. All purchases are final. Contact iTunes Store support. You need to settle up before you can purchase or download anything else.

Issue with windows movie maker

Hi Team,
I am a windows 7 enterprise user working with Dell. My OS is an OEM/corporate image and I am unable to install movie maker and get an error code 0x80070643. I have tried multiple times to install and been unsuccessful. Please help me as this important tool
for my presentations @ work. My IT team confirmed that this is not an issue with the system itself and it is an issue with either the app or the config.

Any updates on this?
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Hi, i have an imac which i bought second hand but but the itunes store wont load up nor will me songs ect sync with the itunes on this comp? i have had no issues with this on previous laptops.... any more of this and i may move to samsung! please help!

hi, i have an imac which i bought second hand but but the itunes store wont load up nor will me songs ect sync with the itunes on this comp? i have had no issues with this on previous laptops.... any more of this and i may move to samsung! please help!

kaylsk1 wrote:
udated and its on 10.6.8 yet still no change
Your signature in 1st post was 10.8.2.
You went backwards?
Did you reformat and reinstall when you first purchased it?
If not I HIGHLY recommend you do that before you do anything else.

Issue with Sub-Con PO (543 O movement)

Similar Messages

Maybe you are looking for