Issue with table in Dashboard

Hi People,
I am facing an issue with a table which is acting up in the Infoview.
In my Dashboard I have a table, when i run the dashboard using the Xcelsius the table is ok,
but when i export it and run through the infoview, the table gets bigger than should be.
Does anyone know how to solve this issue ? Is it something that i have missed to configure
in the Xcelsius or something like that ?
Best Regards,
Jordan
Edited by: Jordan Silva on Sep 15, 2010 2:54 PM

I have done Quiet a dashboard's but never faced this issue before...I problem i used to get is During image component ,if dont not resize that it will be bigger than the orginal
I.g Click on image component and If First Check box is not checked image will be bigger.
Never faced this with tables...

Similar Messages

Issue with table ROOSPRMSF entries for data source 0FI_AP_4

Hi Experts,
I am facing with an issue where we found incosistencies with table ROOSPRMSF in R/3 system.
In BW , we have done initializations based on fiscal period selections (none of the selections overlap) for data source 0FI_AP_4.
We have done in total 7 initializations. So in BW system in table RSSDLINITSEL we have 7 initialization requests.
But in R/3 system we have 49 records for data source 0FI_AP_4 in ROOSPRMSF table out of which 42 are invalid records.
I suspect that these 42 invalid records are created due to the execution of program RSSM_OLTP_INIT_DELTA_UPDATE when the tables ROOSPRMSF are actually holding the 7 initialization request entries. Due to this each and every initialization request is linked to rest of the other intialization requests and ended with 49 records in table ROOSPRMSF table.
Now our data loads are running fine but daily a short dump is raised . In the daily loads, BW init records in RSSDLINITSEL are compared with ROOSPRMSF entries and all the other 42 records which are invalid are written into system log and a short dump is raised.
In order to fix these inconsistencies i checked for OSS note 852443. (Point 3 in OSS note)
But it is specified to delete the delta queue for data source 0FI_AP_4 in RSA7 and instructed to execute the program RSSM_OLTP_INIT_DELTA_UPDATE so that the ROOSPRMSF table will be reconstructed with valid records available in RSSDLINITSEL.
From OSS note 852443 point 3
"3. If the RSSDLINIT table in the BW system already contains entries, check the requests listed there in the RNR column in the monitor (transaction RSRQ). Compare these entries with the entries in the ROOSPRMSF and ROOSPRMSC tables with the INITRNR field. If, in the ROOSPRMSF and ROOSPRMSC tables for your DataSource source system combination, there are more entries with different INITRNR numbers, use transaction RSA7 in an OLTP source system to delete all entries and then use the RSSM_OLTP_INIT_DELTA_UPDATE report mentioned in the next section. For a DataMart source system, delete the entries that you cannot find in the RSSDLINIT table using the procedure described above."
My question is if we delete the delta queue in RSA7 then all the tables in R/3 (ROOSPRMSF, ROOSPRMSC, Time stamp table) and BW (RSSDLINITSEL, initialization requests will be deleted) will be cleared. Then how will the program RSSM_OLTP_INIT_DELTA_UPDATE copy entries into ROOSPRMSF table in R/3 ?
Could any one please clarify this ?
Thanks
Regards,
Jeswanth

Hi Amarnath,
Did you unhide the new field in RSA6 and regenerated the DataSource?
Often SAP will populate newly added fields (belonging to the same (set) of table(s) used for extraction) automatically (e.g. SAP uses 'move-corresponding' in it's extractor-code, or, in this case, reading all fields from the DD, FM BWFIU_TRANSFORM_FIELDLIST).
If the DataSource looks fine to you and the field is still not populated in RSA3 you can't go without a user-exit.
Grtx,
Marco

Issue with gauges in dashboard

Hi everyone. I have an issue with a gauge. I made the configuration for the alerts by value and percent, but show me and incoherent result. I'm working with filtered values.
All is good but when i run the dashboard the result is this.
What can i do to solve this? Thanks for the help. Regards.
PD: Sorry for my english.

Is anyhow your target for alerter is changing ? I checked that if I keep 0.02 as target for alerter and also max scale value, then I can see the same gauge as yours.

Issue with Parent child dashboards using SWFLoader component

Hello Gurus,
I am using Parent-child dashboards approach in our project.
I have multiple child files embedded in Parent dashboard using the SWFLoader (directly passing the URL as SWFLoader value) to load child dashboards. All the child, parent swf's are saved in the same intranet folders.
When I open the parent SWF, everything loads fine in the intranet.
But for some users, when they open from the intranet, the child dashboard doesnt load up properly or size of the dashboard gets reduced to a small version. (Iam sure that it has nothing to do with the access/privileges)
Any thoughts/ideas what could be causing an issue with child dashboard/resizing of the child dashboard.
Please help!
regards,
S R

Check whether the machine has compatible flash version in error specific machine and your machine.

Issue with tables :( Plz Help!

Hey all!
Never posted before on this forum and pretty new with
dreamweaver. So I'm having the strangest issue with dreamweaver
tables. I bought a template that I'm modifying by my self which
isnt all that hard haha. But Here's what I ran into. Whenever I put
one table and then another one under it and another one under it
and I insert txt or pics in there and save it, after I upload it
and preview it, I can only see the info from the first table.
Everything else under it, wont show up.
So no matter where and on what page I do it from that
template, if I put more than 1 table down, it'll only show the info
from the first and top table and everything else in other tables
under it, wont show up at all (after I upload it) even thou it
looks good on dreamweaver itself :(
Is there an option to enable or disable something? Plz help,
thank you all!

"Unknown7" <[email protected]> wrote:
> So no matter where and on what page I do it from that
template, if I put more
>than 1 table down, it'll only show the info from the
first and top table and
>everything else in other tables under it, wont show up at
all :(
>
> Is there an option to enable or disable something? Plz
help, thank you all!
The bad news is that if you want to do anything remotely
complicated with
Dreamweaver you will have to learn a fair amount about HTML.
I would virtually
guarantee that when you put your new table in something is
going wrong so that
one or other table is not being defined correctly.
As you are modifying someone else's template there is
virtually no way to find
out what is happening other than to examine the HTML. It is
unlikely that
fiddling with any Dreamweaver settings will make any
difference.
Every table should start with something like:
<table width="100%" border="0" cellspacing="0"
cellpadding="5"
bgcolor="#e0e0ff">
<tr align="center" valign="middle">
<td width="9%"><a href="#Bottom">
and end with:
</td>
</tr>
</table>
You can have more or less as many columns as you like in a
table, (<td> ...
</td>
And more or less as many rows ( <tr><td> ...
</td></tr>) as you like, but
unless you get up to special tricks you should have the same
number of columns
in every row. You can put anything you like -- images, more
tables, whatever --
inside a cell e.g.:
<td> image, blah, table </td>,
but you mustn't put any content anywhere else, and every
opening definition
(<table>, <tr>, <td> must have a matching
closing definition in the correct
order.
You can nest tables more or less indefinitely, but
Dreamweaver Design View
sometimes blows its top if you go more than three deep.
HTML usually doesn't produce any error messages, but the
effect of omitting any
of the steps in building a page is quite unpredictable.
Sometimes a major error
will not produce any visible effect, but on other occasions a
minor error will
send the page completely haywire.
You may care to have a look at:
http://www.corybas.com/Technical/Wrapping.htm
This has a series of demonstration pages illustrating what
happens when you try
to display increasingly complicated page layouts on narrow
screens.
Once you have learnt to interpret HTML, you can often learn a
lot by inspecting
the source code for the page (in IE click view, then Source).
This works with
anybody's page, so you can look at the source code for my
pages if you wish.
Clancy

Strange issue with table control in dialog programming! Please help!

Hello everyone:
I have a table control on screen painter and I have atleast 10 rows on display when user calls the screen. If I have 15 columns then ofcourse user has to scroll down to see extra rows. I have line selection set to "single" for table control so that user can select only one row at a time. This works fine when user does not have to scroll to see extra rows. It is tough for me to explain i.e., if the table control displays 10 rows when the screen opens up then they can only select single row at a time (rows 1 -10). For example user selected row 7 and now they scroll down to see extra rows (for example 13) then it lets them select row 13 also even though I set line selection to "single" in the properties for table control! They should be able to select only one row at a time. Is this some limitation with table control in SAP? Please give me any information you have.
Thanks.
Mithun

Hi,
As you suspected, this is a limitation in the table control. You need to take care of the single-selection functionality yourself except for the rows that are actually being displayed. See [Note 588284|https://service.sap.com/sap/support/notes/588284] for the official SAP explanation.
Regards,
Jamie

Issues with table filter during navigation between task-flows

Hello everyone,
I'm looking for a workaround to resolve two issues about the table filter. They are:
1) If I type something in a filter and I change tha page (in a different task flow) when I return on the first page there is the previous search plus the string "%*". Here the video example: http://screencast.com/t/FbVenZGm
2) In the same scenario, if I click enter on this filter the system returns this message error: "Attempt to set a parameter name that does not occur in the SQL: vc_temp_1 ". Here the video example: http://screencast.com/t/yMs6rNDF
I have found something interesting in this thread: task-flow table filtering behaviour related to bug 8602867
Anyway, I have implemented the solution reported in this document: http://www.oracle.com/technetwork/developer-tools/adf/learnmore/april2012-otn-harvest-1609383.pdf (pp. 8-11). This solution works fine with my master table, but it doesn't with the detail table.
Have you any idea for this kind of behavior?
Thanks in advance,
Baduel

Sudipto,
each table has a binding on a page fragment in this way:
<af:table [...] binding="#{backingBeanScope.MyBackingBean.masterTable}">
<af:table [...] binding="#{backingBeanScope.MyBackingBean.detailTable}">
In the pageDef I have two methods, each one of the VOImpl class related to the table:
<methodAction IterBinding="MasterTableVO1Iterator"
id="clearOutstandingImplicitViewCriteriaMaster"
RequiresUpdateModel="true" Action="invokeMethod"
MethodName="clearOutstandingImplicitViewCriteria"
IsViewObjectMethod="true" DataControl="MyDataControl"
InstanceName="MyDataControl.MasterTableVO1"/>
<methodAction IterBinding="DetailTableVO2Iterator"
id="clearOutstandingImplicitViewCriteriaDetail"
RequiresUpdateModel="true" Action="invokeMethod"
MethodName="clearOutstandingImplicitViewCriteria"
IsViewObjectMethod="true" DataControl="MyDataControl"
InstanceName="MyDataControl.DetailTableVO1"/>
MyBackingBean class:
public class MyBackingBean {
private RichTable masterTable;
private RichTable detailTable;
/*getter methods here*/
public void setMasterTable(RichTable masterTable) {
this.masterTable = masterTable;
resetTableFilter(1);
public void setDetailTable(RichTable detailTable) {
this.detailTable = detailTable;
resetTableFilter(2);
/*This method returns the phase id */
private String printCurrenPhaseID() {
FacesContext fctx = FacesContext.getCurrentInstance();
Map requestMap = fctx.getExternalContext().getRequestMap();
PhaseId currentPhase=(PhaseId)requestMap.get("oracle.adfinternal.view.faces.lifecycle.CURRENT_PHASE_ID");
// System.out.println("currentPhase = "+currentPhase);
return currentPhase.toString();
public void resetTableFilter(int tab) {
String phase = printCurrenPhaseID();
FilterableQueryDescriptor queryDescriptor;
if(phase.startsWith("RENDER_RESPONSE")) { // Only in this phase the binding is ready
switch(tab) {
case 1:
queryDescriptor = (FilterableQueryDescriptor) getMasterTable().getFilterModel();
if (queryDescriptor != null && queryDescriptor.getFilterCriteria() != null) {
queryDescriptor.getFilterCriteria().clear();
// PPR refresh a jsf component
AdfFacesContext.getCurrentInstance().addPartialTarget(getMasterTable());
break;
case 2:
queryDescriptor = (FilterableQueryDescriptor) getDetailTable().getFilterModel();
if (queryDescriptor != null && queryDescriptor.getFilterCriteria() != null) {
queryDescriptor.getFilterCriteria().clear();
// PPR refresh a jsf component
AdfFacesContext.getCurrentInstance().addPartialTarget(getDetailTable());
break;
default: return;
invokeClearViewCriteria(tab);
public BindingContainer getBindings() {
return BindingContext.getCurrent().getCurrentBindingsEntry();
/* This method invokes the exposed method in my fragment */
public void invokeClearViewCriteria(int tab) {
BindingContainer bindings = getBindings();
OperationBinding operationBinding;
if(tab == 1)
operationBinding = bindings.getOperationBinding("clearOutstandingImplicitViewCriteriaMaster");
else if(tab == 2)
operationBinding = bindings.getOperationBinding("clearOutstandingImplicitViewCriteriaDetail");
else
return;
if(operationBinding != null) {
operationBinding.execute();
Finally I have two identical exposed methods in the VOImpl classes of the tables:
public void clearOutstandingImplicitViewCriteria() {
// we only want to remove the stuff that was added though the table
//filter (or a default search form)
// "__ImplicitViewCriteria__" is the magic name for this VC
ViewCriteria vcDefault = this.getViewCriteria(ViewCriteriaManager.IMPLICIT_VIEW_CRITERIA_NAME);
if (vcDefault != null) {
//Clear the stored values
vcDefault.clear();
//And refresh the collection
this.executeQuery();
Please note that this workaround works fine with my master table, but i does not with the detail table.
Thanks again.
Baduel

Issue with viewing SAP Dashboards Portal iView in iPad Safari browser (Mobile)

Hi,
I am facing an issue while viewing iViews hosted in SAP Enterprise Portal. I have two iViews -
1) An SAP BICS Dashboard - Published as an iView in EP. I can see the dashboard in my laptop running properly. It consumes BEx queries (BICS dashboard) in the background.
2) A BEx query published as an iView (java web format), also able to run and execute from my laptop.
When I am logging into the portal from IPad Safari web browser I am able to see and run the BEx query iView published in the portal.
However, for the SAP Dashboard iView, it is showing me a blank page after loading. Is it possible to see SAP BICS Dashboard through an iView in Ipad?
I need to run the dashboard iView from the IPad as well. It is an urgent requirement
Would really appreciate your help!!
Thanks,
Debtanay
Message was edited by: Anja Engelhardt

Hi,
Don't spend your time to find the reason.
BI platform content is not supported directly in Safari on iPad or Chrome on Android, only through the Mobile BI apps on these platforms.
Please see PAM chapter "SAP BusinessObjects BI Platform 4.1 Mobile Clients supported with this release"
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/507d3365-009b-3010-04b0-e5abc8f00c91?QuickLink=index&overridelayout=true&59407987714033
Best regards,
Roman

Fade Effect Issue with table structure

I have an existing HTML page with a table framework that uses
CSS divs in some of the table rows. My SPRY data is currently
wrapped in DIV tags within the table. I've discovered that the
table is screwing up the fade effect in IE7. Is there any way I can
get around this without removing the table and recoding the whole
page in CSS? FYI...I using version 1.4. I'm not sure if 1.5 will
fix this issue.

Essentially the fade in fade out effect isn't working at all
in IE. It's setup as a slideshow and uses the fade effect as a
transition between the spry data. The slideshow works fine just
without the fade effect. Everything works perfectly in Firefox
though. I know this code will work as we have used it before, the
only thing different is that I have my DIV with the SPRY content
wrapped within a table cell and row. I've read that the TR tag
cannot be used, but it's not exactly using the TR as an ID. Once I
comment out the table, tr, and td tags, the effect works no problem
so I know it is the table. I can't give you the URL because it's on
our local network.

SQLServer to oracle migration. Issue with table having image data.

Hi,
I am using the SQL Developer version 1.5.0.53 Build MAIN-53.38. I am trying to migrate from sql server database to oracle. Sql server database version is 2005 and oracle database version is 10g (10.1.0.2 and 10.2.0.3). Both Oracle and Sql server databases are on windows-xp.
Everything (including data) migrated well except for the one table having blob (oracle) and image(sqlserver). I am getting the following error in sql developer while migrating data for the blob from sql server to oracle.
Data Move information:Rows : 497 Errors: 10278
Commit failed: Closed Connection
Must be logged on to server
[POCRepository].[td].[REPOSITORY] Closed Connection
Io exception: Software caused connection abort: socket write error
[POCRepository].[td].[REPOSITORY] OALL8 is in an inconsistent state
No more data to read from socket
[POCRepository].[td].[REPOSITORY] No more data to read from socket
Inserting ' ' into column td_POCRepository.REPOSITORY.RP_DATA (Row number 498)
I have created sqldeveloper.cmd file as suggested in other threads and I am using the same java provided with SQL Developer 1.5.0.53.
The database alertsid.log shows the following error messages for this activity.
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [0x34EF9E5] [] [] [] []
ORA-00600: internal error code, arguments: [kghasp1], [0x5F3B718], [], [], [], [], [], []
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [0x34EF9E5] [] [] [] []
The error ORA-00600[kghasp1] refers to the problem with heap memory. I also restarted the database and tried the data migration for only this table but with the same error.
I tried it on both 10g release1 and 10g release 2.
Can someone please help me in resolving this issue.
Thanks
Raghavendra

Hi Raghavendra,
Are you saying the Microsoft SQL Server bcp dump of image data failed? It has been tested, it results in a hex dump rather than a binary dump, hence the clob to blob, and hextoraw workaround.
What are the version numbers and what is the reproducible test case?
-Turloch
Note that the clob to blob process is automated:
Tools->preferences->Migration->Generation Options->General Options->Generate Stored Procedure for Migrate Blobs Offline
From Help:
Generate Stored Procedure for Migrate Blobs Offline: Causes a stored procedure named CLOBtoBLOB_sqldeveloper (with execute access granted to public) to be created if the schema contains a BLOB (binary large object); this procedure is automatically called if you perform an offline capture. If this option is not checked, you will need to use the manual workaround described in Populating the Destination Database Using the Data Files. (After the offline capture, you can delete the CLOBtoBLOB_sqldeveloper procedure or remove execute access from public.)

Issue with presentation variables, dashboard prompt and filter

Dear Guru's,
I have a question about constraining a request with presentation variable set by a dashboard prompt. I have a dashboard prompt, that stores its value in a presentation variable . The prompt is about region. When the dashboard opens, the default of the prompt is all choices and it needs to show my reports with "All Choices". I've created the following filter on my two reports on the dashboard:
"Dim Student"."Region" = '@{variables.GILLES}'
or '@{variables.GILLES}' IS NULL
One report is just the column "Dim Student"."Region" (to see if it works) and with this report the above filter works just fine. When nothing is prompted it shows "All Choices" when a choice is made the report responds accordingly.
BUT
The second report on my dash with the same region column, but extended with some time dimension columns and a measure gives an error which I'm not able to solve.
+State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14023] None of the fact sources for ToDate(# Feitelijke Instroom:[DAggr(Feit Instroom en Uitstroom Opleidingen.# Feitelijke Instroom by [ Dim Tijd.Maand Omschrijving, Dim Tijd.Maand Nummer, Dim Tijd.Jaar, Dim Kwalificatie.Kwalificatie Niveau, Dim Leerling.RCBREGIO Regio] )], [Level JAAR]) are compatible with the detail filter [Dim Tijd.Maand Nummer = 3, Dim Tijd.Jaar = 2010].+
+(HY000)SQL Issued: SELECT "Dim Tijd".Jaar saw_0, "Dim Tijd"."Maand Nummer" saw_1, "Dim Tijd"."Maand Omschrijving" saw_2, "Dim Kwalificatie"."Kwalificatie Niveau" saw_3, "Dim Leerling"."RCBREGIO Regio" saw_4, "Feit Instroom en Uitstroom Opleidingen"."# Feitelijke Instroom Cumulatief" saw_5, REPORT_SUM(saw_5 BY saw_0, saw_1, saw_2) FROM repos_x WHERE ("Dim Tijd".Jaar = 2010) AND ("Dim Tijd"."Maand Nummer" = 3) AND (("Dim Leerling"."RCBREGIO Regio" = 'Noord-Oost') OR ('Noord-Oost' IS NULL)) ORDER BY saw_0, saw_1, saw_2, saw_3, saw_4+
While the exact same report but without the "or '@{variables.GILLES}' IS NULL" doesn't throw any errors but doesn't show the "all choices" by default.
The ultimate goal to achieve is to build a dashboard with several reports from several subject areas with one single prompt that opens default with "all choices" and constrains the reports accordingly.
Any help is highly appreciated.
Kind Regards,
Gilles

Phani,
I know "All Choices" is a special value and that it doesn't represent NULL. My filter construction seems to work fine.
My filter condition:
"Dim Student"."Region" = '@{variables.GILLES}'
or '@{variables.GILLES}' IS NULL
When it's set by the prompt it filters the request accordingly (first condition evaluates to true), when it's not set the second condition evaluates to true and shows all the results (or it's not filtered).
The problem is that it doesn't work when time dimensions are combined with this filter. Then it throws the error mentioned in the first post.
By the way: your suggested solution doesn't work.

Issues with Using Data Dashboard and Using Web Service

After running a system for many months it has suddenly decided to not work at all. I am using Data Dashboard to read variables on a host. I'll outline the system here to get a baseline:
I'm running LV 2012 SP1 f5.
I collect data from one Ethernet port and interfact it to another Ethernet port to form a proxy.
I use a fixed IP address from my DSL along with port forwarding/port triggering in my router for data observation and control.
So, what have I done so far?
1. Repaired my original LV 2012 SP1 and tested system.
2. Upgraded to LV 2012 SP1 f5 and tested system.
3. Ran service.msc and checked all the NI services that should be operational. Started and stopped several of them and rebooted computer.
4. Deployed all my SVs (multiple times)
5. Disconnected second Ethernet interface becasue sometimes the variables would deploy to this IP address.
6. Turned off my wireless because sometimes the variables would deploy to this IP address.
7. Checked "Web Server Configuration" "Application Web Server" for correct port number.
8. Checked "Web Services Management" and under "Deployed Web Services" there is one category: SV is marked as running. NOTE!! WebService is NOT listed and this could be a problem
I can use the following to retrieve data&colon; localhost:<port number>/sv/variable. But when I substitute my DSL IP number, I can no longer get any data.
So, what am I missing?
Thanks,
Paul.

Siana,
Thanks for your response.
I haven't touched the NI code in months. It is running on an XP laptop and I have the Windows updates turned off. McAfee is running on it and of course that updates regularily. This laptop is a dedicated machine that I only use for this function, nothing else. I haven't added or subtracted any programs for many months.
There have been no changes to the DSL from me. AT&T is constantly trying to get us to upgrade to U-Verse but we have resisted. All DSL modem and router hardware is the same.
Confusing, huh?

ADF Popup issue with table row not selected

OK, imagine this scenario. There is a page displaying a table of employees, and when you click on the employee_id (which is shown as URL), which is one of the columns of the table, a popup displays, showing the details of that particular employee.
Now in the properties of the employee table, we unchecked the row selection property. Now how will I be able to achieve the same thing?
I dragged the setCurrentRowWithKeyValue operation on employee_id column, changed the bindings of the TEXT property, added a popup behaviour, but still the popup displays the first row which is fetched in the table.
Where am I missing, or is there any other way to achieve the same thing?
JDev version: 11.1.2.2.0
Edited by: Sonal on Oct 11, 2012 3:11 AM

I did an exercise where I created one page which was displaying all the employees, and once you click on employee_id (which is shown as URL), a 2nd page opens displaying the details of the employees.
Now in the above exercise, ROW SELECTION was disabled, for which I had to use this setCurrentRowWithKeyValue operation and then set the NDValue with the binding of the employee ID. So whenever I used to click on the employee_id, the page was taking to me the form, which was displaying exactly the same employee details.
Now this thing should work with the popup thing too, right? So I disabled the ROW SELECTION

Issue with table selection in popup window in oaf

Hi ALL,
I have a popup seach window in that i am displaying search data in table region below, from that i need to select the number of rows and clicking on a button the same selected rows should display in another page.
i tried with using RowSetIterator but not able to achive this , please help me out on this.
Thnaks

Can anyone please help me on this
Thnaks

Issue with table selection and display the seleted rows in another page as a table data

Dear ALL,
I have a requirement as below:
I have a custom OAF page having one button, on pressing the button it will open a popup window, in that i am doing search operation and data would populate in table region below.
Then from the table i am doing multiple selection of rows and i have a button, on pressing the button the seleted rows should display in the base page where i called this popup window and popup window should close.
so i am able to perform multiple selection of row from the table but how i can display the seleted rows in my base page and how i can close the poup window after the seleted rows displayed in the base page, please help me on this.
Thanks
Deb

Hi,
For navigation data from one page to another you can use a hashmap that contains the parameters.
// processFormRequest()
HashMap hsp = new HashMap(1);
hsp.put("myParam", "myParamVal");
pagecontext.setForwardURL("MY_FUNCTION", (byte)0, null, hsp,true, "N", (byte)0);
You can then retrieve this parameter in processRequest() via:
pagecontext.getParameter("myParam")
//Code for redirect to base page with commit
Refer to the setPostToCallingPage method, from OADialogPage Class how to make the dialog page action buttons submit back to the calling page. In the example, the OK button commits the changes on the dialog page and the NO button rolls back the changes.
OADialogPage dialogPage = new OADialogPage(OAException.*, mainMessage, null, "", "");
dialogPage.setOkButtonItemName("okButton");
           dialogPage.setOkButtonToPost(true);
           dialogPage.setNoButtonToPost(true);
           dialogPage.setPostToCallingPage(true);
           dialogPage.setOkButtonLabel(yes);
           dialogPage.setNoButtonLabel(no);
Thanks,
Dilip

Issue with table in Dashboard

Similar Messages

Maybe you are looking for