Issue with tablespace

We had a tablespace and maxsize of it was specified as 'unlimited'. It has single datafile.
While creating index we are getting error 'unable to xtend tablespace.....'(ORA-01652).
Do we have to specify the maxsize while creating datafile also?
Regards
Rajiv Gupta

Amit,
Maran has good given description for ulimit.Will just add to it.You can check about ulimit ulimit.For root user the access to the resource to the resources are unlimited.For other users,we need to map the resources to limits so we use it.Like for example,tp increase the number of open files we can set some thing like ulimit -n 5000.You basically set all these settings in /etc/system.
Aman....

Similar Messages

Need clarification on issue with tablespaces

Hi All,
I needed clarification on this issue with tablespaces.I am following a guideline which says "Presently,The general rule of thumb is to concentrate on tablespaces that are 90% or greater used and have less than 2 GB of free space"
My Scenario:-Now i have tablesace which is 97.23 % and the free space is 10 gb.Please advise me that whats the best next step I can take in this respect?
I am very new to this and just following the guideline,so can you all please explain me some details about this.
Thanks

Well, the guideline says "*and* have less than 2 GB of free space"
Since that tablespace as 10GB of free space, the guideline says that you do not need to concentrate on it. Eh ?
I would be careful with guidelines that are hard-coded in this manner. You need to know the context in which the guideline was set.
Assuming that your database/application doesn't grow suddenly by 1GB or larger (or create temporary segments / objects of 1GB or larger), the "2 GB of free space" might make sense. Then, again, it depends on the extent allocation type. What size are extents getting allocated.
You should check with your organisation's senior DBAs on what happens if you don't concentrate on a tablespace because it is outside the guidelines !

Clarification on issue with tablespaces

Hi All,
I needed clarification on this issue with tablespaces.I am following a guideline which says _"Presently,The general rule of thumb is to concentrate on tablespaces that are 90% or greater used and have less than 2 GB of free space"_
My Scenario:-Now i have tablesace which is 97.23 % and the free space is 10 gb.Please advise me that whats the best next step I can take in this respect?
I am very new to this and just following the guideline,so can you all please explain me some details about this.
Thanks

What's the rate of growth? Is 10GB going to last you a day? A week? A month?
Cheers, APC
blog: http://radiofreetooting.blogspot.com

Issue with tablespace PSAPTEMP

Hello,
Database alert logs (Oracle + Netweaver 7) says 'Unable to extend Tablespace PSAPTEMP'.
But DB02 shows taht PSAPTEMP is totally free.
COuld you please throw some light on this paradox.
Thanks.

Our PSAPTEMP is a good 4GB in size.
The alert log reads like this --
Tue Aug 25 08:02:51 2009
Completed checkpoint up to RBA [0xe0b0.2.10], SCN: 1277106986
Tue Aug 25 08:05:08 2009
ORA-1652: unable to extend temp segment by 258 in tablespace                 PSAPTEMP
ORA-1652: unable to extend temp segment by 258 in tablespace                 PSAPTEMP
Tue Aug 25 08:06:18 2009
ORA-1652: unable to extend temp segment by 258 in tablespace                 PSAPTEMP
ORA-1652: unable to extend temp segment by 258 in tablespace                 PSAPTEMP
Tue Aug 25 08:07:26 2009
ORA-1652: unable to extend temp segment by 258 in tablespace                 PSAPTEMP
ORA-1652: unable to extend temp segment by 258 in tablespace                 PSAPTEMP
Tue Aug 25 08:07:27 2009
/* BRARCHIVE */ ALTER DATABASE BACKUP CONTROLFILE TO 'E:\oracle\EBP\SAPReorg\CNTRLEBP.DBF'
Completed: /* BRARCHIVE */ ALTER DATABASE BACKUP CONTROLFILE TO 'E:\oracle\EBP\SAPReorg\CNTRLEBP.DBF'
Tue Aug 25 08:15:13 2009
Incremental checkpoint up to RBA [0xe0b0.108ed.0], current log tail at RBA [0xe0b0.10fed.0]
Tue Aug 25 08:45:14 2009
Incremental checkpoint up to RBA [0xe0b0.18b95.0], current log tail at RBA [0xe0b0.198df.0]
Tue Aug 25 09:15:22 2009
Incremental checkpoint up to RBA [0xe0b0.24c8b.0], current log tail at RBA [0xe0b0.28223.0]
Tue Aug 25 09:16:03 2009
Tue Aug 25 09:21:05 2009
Completed checkpoint up to RBA [0xe0b1.2.10], SCN: 1277162230
Tue Aug 25 09:45:38 2009
Incremental checkpoint up to RBA [0xe0b1.d6f8.0], current log tail at RBA [0xe0b1.1069b.0]
Tue Aug 25 10:15:46 2009
Incremental checkpoint up to RBA [0xe0b1.25f58.0], current log tail at RBA [0xe0b1.27367.0]
Tue Aug 25 10:20:29 2009
Tue Aug 25 10:25:32 2009
Completed checkpoint up to RBA [0xe0b2.2.10], SCN: 1277185489
Tue Aug 25 10:45:54 2009
Incremental checkpoint up to RBA [0xe0b2.89ce.0], current log tail at RBA [0xe0b2.c956.0]
Tue Aug 25 11:15:55 2009
Incremental checkpoint up to RBA [0xe0b2.221e3.0], current log tail at RBA [0xe0b2.25707.0]
Tue Aug 25 11:26:12 2009
Tue Aug 25 11:31:14 2009
Completed checkpoint up to RBA [0xe0b3.2.10], SCN: 1277208797
Tue Aug 25 11:45:56 2009
Incremental checkpoint up to RBA [0xe0b3.aabc.0], current log tail at RBA [0xe0b3.d507.0]
Tue Aug 25 12:05:42 2009
ORA-1652: unable to extend temp segment by 258 in tablespace                 PSAPTEMP
ORA-1652: unable to extend temp segment by 258 in tablespace                 PSAPTEMP
Tue Aug 25 12:07:05 2009
ORA-1652: unable to extend temp segment by 258 in tablespace                 PSAPTEMP
ORA-1652: unable to extend temp segment by 258 in tablespace                 PSAPTEMP
ORA-1652: unable to extend temp segment by 258 in tablespace                 PSAPTEMP
Tue Aug 25 12:07:07 2009
/* BRARCHIVE */ ALTER DATABASE BACKUP CONTROLFILE TO 'E:\oracle\EBP\SAPReorg\CNTRLEBP.DBF'
Completed: /* BRARCHIVE */ ALTER DATABASE BACKUP CONTROLFILE TO 'E:\oracle\EBP\SAPReorg\CNTRLEBP.DBF'
Tue Aug 25 12:15:56 2009
Incremental checkpoint up to RBA [0xe0b3.23fd4.0], current log tail at RBA [0xe0b3.243ef.0]
Tue Aug 25 12:28:00 2009
Tue Aug 25 12:33:07 2009
Completed checkpoint up to RBA [0xe0b4.2.10], SCN: 1277250318
Tue Aug 25 12:46:13 2009
Incremental checkpoint up to RBA [0xe0b4.31fa.0], current log tail at RBA [0xe0b4.884c.0]
Tue Aug 25 13:16:29 2009
Incremental checkpoint up to RBA [0xe0b4.17879.0], current log tail at RBA [0xe0b4.1b768.0]
Tue Aug 25 13:46:29 2009
Incremental checkpoint up to RBA [0xe0b4.2657a.0], current log tail at RBA [0xe0b4.2a3d8.0]
Tue Aug 25 13:50:17 2009
Tue Aug 25 13:55:18 2009
Completed checkpoint up to RBA [0xe0b5.2.10], SCN: 1277273370
Tue Aug 25 14:16:30 2009
Incremental checkpoint up to RBA [0xe0b5.11df5.0], current log tail at RBA [0xe0b5.13fa3.0]
Tue Aug 25 14:46:31 2009
Incremental checkpoint up to RBA [0xe0b5.24569.0], current log tail at RBA [0xe0b5.25e9a.0]
Tue Aug 25 14:54:21 2009
Tue Aug 25 14:59:14 2009
Completed checkpoint up to RBA [0xe0b6.2.10], SCN: 1277297035
Tue Aug 25 15:16:32 2009
Incremental checkpoint up to RBA [0xe0b6.194e5.0], current log tail at RBA [0xe0b6.1a2cc.0]
Tue Aug 25 15:42:08 2009
Tue Aug 25 15:46:32 2009
Incremental checkpoint up to RBA [0xe0b6.294ce.0], current log tail at RBA [0xe0b7.8dfd.0]
Tue Aug 25 15:47:10 2009
Completed checkpoint up to RBA [0xe0b7.2.10], SCN: 1277319066
Edited by: Gautam Poddar on Aug 26, 2009 1:07 PM

Issue with SYSAUX tablespace.

Without backup and any old archivelog(more then last five days),IN RAC environment we are trying to recover one of datafile of our SYSAUX tablespace which is in RECOVER state.
sysaux tablespace having two datafile,while making online to second datafile it's asking for last month archivelogs which we dont have And while making online to SYSAUX tablespace it's giving error that one of your database datafile recquire recovery.
ORA-00279: change 195638767 generated at 08/10/2009 14:17:27 needed for thread 1 while recovering by auto
recover datafile 42;
ORA-15173: entry '1_15271_682264878.dbf' does not exist in directory 'csdprod'

Jaroslaw Bicz wrote:
Hi
I'm having some issue with SYSAUX tablespace. it have 36GB Allocated Size but only 2GB used. Is there a way to reuse free space. it is oracle 10.2.0.4 on red hat.
Regards
JarekOracle doesn't recommend to use SYSAUX tablespace to store user data on it

Performance Issues with Debugging even in Display Mode

Hi not certain if this would sit in Security, ABAP or Basis, but lets start here as it is security related.
S_DEVELOP with any activity on DEBUG on a production system is a concern, but what are the performance related issues when a super user has to go into debug in display only on a production system because of a really complex issue?
I've heard in the past of a scenario where system performance was impacted, and we have notes around the allocation of S_DEVELOP display DEBUG access to this point. (I've summarised these below)
The risk with debug is associated with the length of time that the actual debugging process is being performed.
u2022 Work processes are dedicated solely to the users for the duration of the debug. If these are being performed for a long time, these can cause issues with not enough work processes being available.
u2022 It can cause DB2 locks. If the debug session last awhile, DB2 locks are not released. This impacts the availability of tablespaces, thus, affecting various transactions running across the system.
Even with these concerns, security will often get asked for debug display access.
As security is about risk identification, assessment and then controlled access what do other organisations do?
Options (not exhaustive) are "No Debug ever" or "Debug display only via a fire fight or super user on a time limited basis".
We are currently in the "debug display only via fire fight" camp, but would like to canvas opinion on this.
As one of the concepts of security is Availability of data (and to an extent ensuring the systems are up and running) do the performance risks push the security function to the "No Debug Ever" stance.

If you need to debug in production, then 9 times out of 10 you need to do root-cause analysis: The developer is the problem.
Writing sloppy code and not testing properly should not be an excuse for debugging in production.
But of course, there are exceptions even when you do try to keep them to a minimum.
To add to Jurjen's comments, also note that the debugger only has a limited capability of doing a rollback. So you can quite easily and unintentionally create inconsistencies in the system - also in display mode - which is an integrity problem, and typically more critical than availability problems or even potential confidentiality concerns.
Cheers,
Julius
Edited by: Julius Bussche on May 15, 2009 10:50 AM

Issue with back end validation in jsf 2.0

I am upgrading my apps to jsf2.0 and I came across something that I hope you have already solved.
In jsf 1.1 action methods returned a string. If that string was NOT mapped as a navigation in faces-config.xml, then it just rerendered the active page. this made doing back end validation easy because I could add messages to the faces context and when the active page rerendered the validation messages would get displayed and no one was the wiser than it was done on the back end instead of on the front end.
In jsf 2.0 I get null pointers if I return a string that is NOT mapped as a navigation. So I changed the code to return a string that is mapped as a navigation for that page when there is a validation error. but that is treating it like a new request and not a rerender so the validation messages I added to the faces context are not there when the page renders.
if i test submit a form that has only front end validation then it works fine and the validation messages are correctly shown.
any suggestions?

In 11.2.0.3 you are unlikely to see the various truncate/drop issues relating to large numbers of small extents - unless you use dictionary managed tablespaces.
There are a couple of possible threats with small extents and highly concurrent inserts with ASSM that might be a temporary problem when the object size is small. There may still be some issues with large uncommitted inserts or deletes making other session's work very hard to identify free blocks until the large transaction has committed - these things can be hard to test.
There may still be a couple of inefficiencies with parallel query and small extents, although parallel CTAS did have a (possibly temporary) hack to allocate immediate large extents to work around some of the silly details.
Really you need to think through your requirements and them model them on your system - some of the anomalies have changed several times over the last three years.
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
Now on Twitter: @jloracle

Issue with Generate Create Script in new ODT 11.1.0.5.10 beta

So I'm trying to determine if there's an issue with the Generate Create Script option in the new ODT 11.1.0.5.10 beta (when you right click on a table in Server Explorer).
The SQL create script that it generates lacks the slash between lines. For example I generated the create script for my User table and this is what was generated:
CREATE TABLE "DEV"."SYSTEM_USER_TB" ("RID" NUMBER(10,0),"USER_NAME" VARCHAR2(256 CHAR),"APPLICATION_RID" NUMBER(10,0),"FIRST_NAME" VARCHAR2(256 CHAR),"LAST_NAME" VARCHAR2(256 CHAR),"PW" VARCHAR2(128 CHAR),"PW_FORMAT" NUMBER,"PW_SALT" VARCHAR2(128 CHAR),"LAST_ACTIVITY_DT" DATE,"EXPIRATION_DT" DATE,"EMAIL" VARCHAR2(256 CHAR),"PW_QUESTION" VARCHAR2(256 CHAR),"PW_ANSWER" VARCHAR2(256 CHAR),"APPROVED_FLG" NUMBER(1,0),"LOCKED_OUT_FLG" NUMBER(1,0),"LAST_LOGIN_DT" DATE,"LAST_PW_CHANGED_DT" DATE,"LAST_LOCKOUT_DT" DATE,"FAILED_PW_ATTEMPT_CNT" NUMBER(6,0),"FAILED_PW_ATTEMPT_WINSTART" DATE,"FAILED_PW_ANSW_ATTEMPT_CNT" NUMBER(8,0),"FAILED_PW_ANSW_ATTEMPT_WINSTRT" DATE,"CREATED_BY_RID" NUMBER(10,0),"CREATED_DT" DATE,"MODIFIED_BY_RID" NUMBER(10,0),"MODIFIED_DT" DATE) TABLESPACE "USERS" PCTFREE 10 INITRANS 1 MAXTRANS 255 STORAGE ( INITIAL 131072 MAXEXTENTS 2147483645 MINEXTENTS 1 )
CREATE UNIQUE INDEX "DEV"."XPKSTAFF" ON "DEV"."SYSTEM_USER_TB" ("RID" ) TABLESPACE "USERS"
ALTER TABLE "DEV"."SYSTEM_USER_TB" ADD ( CONSTRAINT "SYS_C0033033" PRIMARY KEY ("RID") USING INDEX "DEV"."XPKSTAFF" ENABLE VALIDATE )
ALTER TABLE "DEV"."SYSTEM_USER_TB" ADD ( CONSTRAINT "SYS_C0033032" CHECK ("RID" IS NOT NULL) ENABLE VALIDATE )
CREATE TRIGGER "DEV"."SYSTEM_USER_TRG1"
BEFORE
INSERT
ON "DEV"."SYSTEM_USER_TB"
FOR EACH ROW
begin
select SYSTEM_USER_SEQ.nextval into :new.RID from dual;
end;
In my new Oracle Database Project, if I right click on the script and select "Run" or "Run On", the script fails saying:
Connected.
CREATE UNIQUE INDEX "DEV"."XPKSTAFF" ON "DEV"."SYSTEM_USER_TB" ("RID" ) TABLESPACE "USERS"
ERROR at line 2:
ORA-00922: missing or invalid option
If I then add, a slash between lines, the script runs successfully and creates the table/trigger and whatever else just fine. For example, I changed the above generated code to look as follows:
CREATE TABLE "DEV"."SYSTEM_USER_TB" ("RID" NUMBER(10,0),"USER_NAME" VARCHAR2(256 CHAR),"APPLICATION_RID" NUMBER(10,0),"FIRST_NAME" VARCHAR2(256 CHAR),"LAST_NAME" VARCHAR2(256 CHAR),"PW" VARCHAR2(128 CHAR),"PW_FORMAT" NUMBER,"PW_SALT" VARCHAR2(128 CHAR),"LAST_ACTIVITY_DT" DATE,"EXPIRATION_DT" DATE,"EMAIL" VARCHAR2(256 CHAR),"PW_QUESTION" VARCHAR2(256 CHAR),"PW_ANSWER" VARCHAR2(256 CHAR),"APPROVED_FLG" NUMBER(1,0),"LOCKED_OUT_FLG" NUMBER(1,0),"LAST_LOGIN_DT" DATE,"LAST_PW_CHANGED_DT" DATE,"LAST_LOCKOUT_DT" DATE,"FAILED_PW_ATTEMPT_CNT" NUMBER(6,0),"FAILED_PW_ATTEMPT_WINSTART" DATE,"FAILED_PW_ANSW_ATTEMPT_CNT" NUMBER(8,0),"FAILED_PW_ANSW_ATTEMPT_WINSTRT" DATE,"CREATED_BY_RID" NUMBER(10,0),"CREATED_DT" DATE,"MODIFIED_BY_RID" NUMBER(10,0),"MODIFIED_DT" DATE) TABLESPACE "USERS" PCTFREE 10 INITRANS 1 MAXTRANS 255 STORAGE ( INITIAL 131072 MAXEXTENTS 2147483645 MINEXTENTS 1 )
CREATE UNIQUE INDEX "DEV"."XPKSTAFF" ON "DEV"."SYSTEM_USER_TB" ("RID" ) TABLESPACE "USERS"
ALTER TABLE "DEV"."SYSTEM_USER_TB" ADD ( CONSTRAINT "SYS_C0033033" PRIMARY KEY ("RID") USING INDEX "DEV"."XPKSTAFF" ENABLE VALIDATE )
ALTER TABLE "DEV"."SYSTEM_USER_TB" ADD ( CONSTRAINT "SYS_C0033032" CHECK ("RID" IS NOT NULL) ENABLE VALIDATE )
CREATE TRIGGER "DEV"."SYSTEM_USER_TRG1"
BEFORE
INSERT
ON "DEV"."SYSTEM_USER_TB"
FOR EACH ROW
begin
select SYSTEM_USER_SEQ.nextval into :new.RID from dual;
end;
So, does anyone know if this is a bug? Could I be missing an option to add in the slashes to the generated code? Is there an option to not require the slashes? Could there be another way to execute these scripts?
Seriously, I think I'm having deja vu from the last release of the Dev Tools: Generate Create Script creates scripts that won't run: ORA-00922: missing..
...except this time the documentation says I should be able to use the "Run" and "Run On" commands in the Oracle Database Project (see page 8): http://www.oracle.com/technology/tech/dotnet/pdf/ODT11_whatsnew.pdf
null

There are 2 issues in the generated script :
1. Missing semicolons at the end of the create stmts
2. Missing slashes
Both of these fixes will be available in the ODT 11.1 release.

Issue with OHS (EPM) installation on Red Hat 6.4

Hello Gurus,
We are facing an issue with the installation of Oracle HTTP server which comes with EPM 11.1.2.2 using EPM Installer on Red Hat 6.4.
When I select the OHS product it says, that the Oracle software is not certified on the current operating system, however it does not happen with any other product in the suite
Is Red Hat 6.4 64 bit not a supported OS?
I have installed all the required libraries mentioned here: Oracle&#174; Fusion Middleware System Requirements and Specifications
Also my NPTL version is 2.12 which is higher than 2.3.4 as mentioned here: Oracle&#174; Fusion Middleware System Requirements and Specifications
Any help will be highly appreciated.

John,
My installation went smooth, however when I start the configuration (Oracle Database) I am getting the following error while configuring the shared service registry:
Failed to navigate from RegistryWizardState: Error while initializing registry. See logs for more details.
My DBA says that he has provided all the following privileges to the schemas.
CREATE SESSION
CREATE VIEW
CREATE TYPE
CREATE TABLE
CREATE CLUSTER
CREATE TRIGGER
CREATE SEQUENCE
CREATE INDEXTYPE
CREATE PROCEDURE
CREATE ANY SYNONYM
DROP ANY SYNONYM
UNLIMITED TABLESPACE
configTool has the following exceptions:
[2013-09-10T10:44:53.748+05:30] [EPMCMN] [WARNING] [EPMCMN-01001] [oracle.EPMCMN] [tid: 10] [ecid: 0000K46JlSgAXNIMyqqYMG1IBegW000002,0] [SRC_CLASS: com.hyperion.cis.utils.oui.OUIUtilImpl] Failed to determine home via OUI: [[
oracle.sysman.oii.oiii.OiiiInventoryDoesNotExistException: The inventory pointer location /etc/oraInst.loc is either not readable or does not exist
    at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiInstallAreaControl.java:1855)
    at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:292)
    at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:231)
    at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:180)
    at com.hyperion.cis.utils.oui.OUIUtilImpl.inventoryTemplateMethod(OUIUtilImpl.java:289)
    at com.hyperion.cis.utils.oui.OUIUtilImpl.findEpmOracleHomeFromInventory(OUIUtilImpl.java:67)
    at com.hyperion.cis.utils.oui.OUIUtilLinkageErrorProtectionWrapper.findEpmOracleHomeFromInventory(OUIUtilLinkageErrorProtectionWrapper.java:18)
    at com.oracle.preconfig.impl.InventoryPreConfigCheck.executeCheck(InventoryPreConfigCheck.java:23)
    at com.oracle.preconfig.PreConfigCheckTemplate.execute(PreConfigCheckTemplate.java:9)
    at Main.runPreconfigChecksAndExitIfFail(Main.java:142)
    at Main.main(Main.java:90)
com.hyperion.hit.registry.exceptions.RegistryException: Unable to create registry.
    at com.hyperion.hit.registry.RegistryConnection.createRegistry(RegistryConnection.java:354)
    at com.hyperion.hit.registry.RegistryUtils.initUpgradeRegistry(RegistryUtils.java:272)
    at com.hyperion.hit.registry.RegistryUtils.initRegistry(RegistryUtils.java:105)
    at com.hyperion.hit.registry.Registry.createBasicComponents(Registry.java:2305)
    at com.hyperion.config.document.Storage.initRegistry(Storage.java:245)
    at com.hyperion.cis.config.ConfigRegistryUtils.initializeRegistry(ConfigRegistryUtils.java:384)
    at com.hyperion.config.wizard.impl.RegistryWizardState$1$1.commit(RegistryWizardState.java:228)
    at com.hyperion.hit.wizard.Wizard$NextClass.run(Wizard.java:544)
    at java.lang.Thread.run(Thread.java:662)
Caused by: java.sql.BatchUpdateException: error occurred during batching: ORA-01950: no privileges on tablespace 'HYPSS_DATA'
    at oracle.jdbc.driver.OracleStatement.executeBatch(OracleStatement.java:6390)
    at oracle.jdbc.driver.OracleStatementWrapper.executeBatch(OracleStatementWrapper.java:248)
    at com.hyperion.hit.registry.RegistryConnection.createRegistry(RegistryConnection.java:344)
    ... 8 more
Any help will be highly appreciated.

Issue with schema publishing after installing Universal Records Management

Installing URM over Content Server has been by far the most random experience I've had so far with any technology... Out of 6 installation attemts of URM, only 1 has been entirely successful.... with no errors.... the rest have errors that makes it impossible to work with the product... The funny thing is that the installation is nothing more than the installation of two components via Component Manager, with a few non-important options in the middle that have always been set to the same value...
First of all, in the installation guide of URM there are no mentions of required avaliable space in the Database Tablespace (idc_system) and in about half of our attempts (yes the other half didn't generate issues with this...) the 300Mb Tablespace filled up and caused the installation to pause until I added another datafile to that tablespace.
Secondly, the error that is a constant present in all failed installations is this one:
Unable to publish the schema. Unable to publish the view 'MediaTypes_View' with relationship 'ObjectTypes_MediaTypes'. Failed to append row. Mismatched number of columns in data result set [ Details ]
An error has occurred. The stack trace below shows more information.
!csSchemaUnableToPublish!csSchemaUnableToPublishView2,MediaTypes_View,ObjectTypes_MediaTypes!syFailedAppendRow
intradoc.common.ServiceException: ! csSchemaUnableToPublishView2,MediaTypes_View,ObjectTypes_MediaTypes
     at intradoc.server.schema.StandardSchemaPublisher.publishViewRelationshipFragments(Unknown Source)
     at intradoc.server.schema.StandardSchemaPublisher.publishViewValues(Unknown Source)
     at intradoc.server.schema.StandardSchemaPublisher.doPublishing(Unknown Source)
     at intradoc.server.schema.StandardSchemaPublisherThread.run(Unknown Source)
Caused by: java.lang.Error: !syFailedAppendRow
     at intradoc.data.DataResultSet.addRow(Unknown Source)
     at physicalcontentmanager.PhysicalContentManagerFilters.customizeMediaTypeSchema(PhysicalContentManagerFilters.java:688)
     at physicalcontentmanager.PhysicalContentManagerFilters.doFilter(PhysicalContentManagerFilters.java:114)
     at intradoc.shared.PluginFilters.filter(Unknown Source)
     at intradoc.server.schema.StandardSchemaPublisher.publishViewRelationshipFragment(Unknown Source)
     at intradoc.server.schema.StandardSchemaPublisher.processViewRelationshipPath(Unknown Source)
     at intradoc.server.schema.StandardSchemaPublisher.publishViewRelationshipFragmentsForView(Unknown Source)
     ... 4 more
This error appears immediatly at the end of the server's first startup, just after all database changes are done upon installing URM. This last attempt I actually went to check the Content Server logs before I tried to login to the instance just to be sure that I wasn't responsible in any way for creating this error, and as I expected it was already there, since this relation is created by one of the Records components.... This error is a product of the URM installation itself and makes it impossible to run any Check-Ins or searches, due to the non-working relation causing Javascript errors which don't allow the forms to load values into any drop-down lists...
We also register every "move" we make during installations, and as we reviewed what we did we feel we did exactly the same steps (it's not that hard in a one-click installation process...), why only ONE of the installations went okay we're entirely clueless about.... What we do know is that we seriously need this issue fixed, not only is it costing us a ridiculous ammount of time in "attempts" but come on.. this issue shouldn't really exist in a public release... unless we're the only ones being affected by it?
On a side note, the URM installation was done over a "fresh" component-clean installation of Content Server, so there was nothing of our own custom components that could interact incorrectly with a component of the URM installation.
If anyone has seen this issue before, please write something here. Thanks in advance,
- Tiago Dias
Message was edited by:
user602700
Message was edited by:
user602700

you should issue a support ticket yourself and get a SR number... that's probably faster than going through the sales guy.
I'd suggest turning on the "schema" trace section, make it verbose, and restart. You may need to disable all component (including URM) before doing this.
Something is wrong with the "MediaTypes_View" definition file, which is here somewhere:
contentserver/data/schema/views/
just not sure what...

Issues with Creative Cloud for teams deployment workflow

The Adobe Creative Cloud for teams IT Deployment Guide lists out steps for IT admins to deploy the CS6 applications and then have their end-users license the trial software with their Adobe IDs once they have been invited to the team. There are two major issues with this document.
First, the media that is on the FTP is not for North American English. We are working to get that posted on the FTP site ASAP. In the meantime, you can find the CS6 MC media from: http://www.adobe.com/downloads/
[Note: Getting media from that page requires the use of the Adobe Download Assistant which is very consumer focused. Sorry about that.]
Second, in order to have the ability to login properly with a Creative Cloud for Teams account the system needs to have the latest copy of Adobe Application Manager installed. If you do not do this step the end user will be prompted for a serial number.
Unfortunately the Adobe Application Manager can’t be packaged with AAMEE nor is it a native installer. I know, I know! Here are the links to the Adobe Application Manager installers:
Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
It can be installed from command line by:
Win: <Path to Setup.exe>Set-up.exe –mode=silent –action=install
Mac: <path to ASU> /ASU/Install.app/Contents/MacOS/Install –mode=silent –action=install
Jody Rodgers | Sr. Product Manager | Creative Cloud for Enterprise | Adobe Systems

Hi Boncker,
I see that you have an active Subscription under your account . Please launch any of the installed product and when you get the trial prompt , please click on License this software and then Enter the Adobe Id & Password for the account that you have accepted the invite .
Please do let us know if that worked for you or not .
Cheers,
Kartikay Sharma

Issue with magsafe/charging (blinks green, amber, off)

Having a quirky issue with my mid-2009 Macbook Pro.
A month or so ago, I began having an issue with my macbook charging. When the computer is up and running and I plug in the magsafe it will say "Calculating..." and then say "Not Charging" and then switch to battery use. It constantly does this as long as the magsafe is connected. The lights on the magsafe will constantly cycle from green to amber to no light.
At first, it would do it a few times then it would start charging. Now it constantly does this without ever stopping. I was editing video the other day for a while and it never stopped the cycle.
Thinking it was the battery, I took it into the Apple Store last week and got a new battery because it had been saying "Service battery" for a while and the battery would only last about 20 minutes on a charge. So I just thought the battery finally refused to charge.
But the problem still exists.
The magsafe is new (only 3 months old) and here's the quirky thing: the computer will charge if it's asleep (lid closed) or shut down completely. No blinking lights at all. It will charge as long as it's asleep or shut down. So I don't think it's the charger. But as soon as you hit the power button to starting booting up, it will blink.
I have reset the SMC a couple times actually, but no change.
Is there something software/firmware related that I haven't tried? Any insight or suggestions would be greatly appreciated before I take it back to the Apple Store (which is about an hour away).
Thanks!

Try resetting the system management controller
http://support.apple.com/kb/HT3964?viewlocale=en_US
If that did nothing for you, try resetting the NVRAM
https://support.apple.com/kb/HT1379

Issue With Page Break When Sorting is also applied on group

Hi
I am facing an issue with Page break only when I have sorting applied on the grouping that I have in the template.
The following is the sample XML
<ROWSET>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Accounts</ORGANIZATION>
<FULL_NAME>test1,</FULL_NAME>
<ELEMENT_NAME>TEST BONUS</ELEMENT_NAME>
<CLASSIFICATION>Supplemental Earnings</CLASSIFICATION>
<RUN_VALUE>250</RUN_VALUE>
<MONTH_VALUE>500</MONTH_VALUE>
<QUARTER_VALUE>500</QUARTER_VALUE>
<YEAR_VALUE>500</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test2</FULL_NAME>
<ELEMENT_NAME>VOLUNTARY AD AND D</ELEMENT_NAME>
<CLASSIFICATION>Voluntary Deductions</CLASSIFICATION>
<RUN_VALUE>5.19</RUN_VALUE>
<MONTH_VALUE>10.38</MONTH_VALUE>
<QUARTER_VALUE>10.38</QUARTER_VALUE>
<YEAR_VALUE>10.38</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test3</FULL_NAME>
<ELEMENT_NAME>HMO MEDICAL</ELEMENT_NAME>
<CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
<RUN_VALUE>19.67</RUN_VALUE>
<MONTH_VALUE>39.34</MONTH_VALUE>
<QUARTER_VALUE>39.34</QUARTER_VALUE>
<YEAR_VALUE>39.34</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test4</FULL_NAME>
<ELEMENT_NAME>PENSION NR DC</ELEMENT_NAME>
<CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
<RUN_VALUE>0</RUN_VALUE>
<MONTH_VALUE>360</MONTH_VALUE>
<QUARTER_VALUE>360</QUARTER_VALUE>
<YEAR_VALUE>360</YEAR_VALUE>
</ROW>
</ROWSET>
In the template I group the data based on CLASSIFICATION and then sort on the same column CLASSIFICATION. I have a page-break applied for every group.
When I generate the PDF, I am not getting the page-breaks for every group. Instead some of them are displayed in the same page.
But when I remove the sorting that I had in the template on the column CLASSIFICATION, I am getting the output in the desired way but not in a sorted order.
kumar

Hi All,
I am using MS-WORD 2007 and BI Publisher desktop 10.1.3.3.3.
When I use split-by-page-break, splitting is performed for every line .. but not for group of lines.
Can anybody throw some light on this?
FYI...
I am using this code:
?if: position() mod 6= 0?
?split-by-page-break:?
?end if?
(Of course with in tags)
in G_LINES loop.
Can anybody help me out :-(
--Saritha

Issue with PTO (Paid Time Off) quota generation

Hi All,
We have an issue with quota generation of PTO for our employees.
The issue goes like this:
We have a Paid time off for employees 5weeks( 200 hrs) for employees who have worked less than 5 years.
we have paid time off for employees 6 weeks ( 240 hrs) for employees who have worked more than 5 years.
we have the following logic that has to go in this config:
-- Our fiscal year starts on Feb 1st and ends on Jan end or Feb starts which has a full week of working days. ( ex: if 01/31/2012 falls on a Thursday the following Monday which has full 5 day working week would be the end of the fiscal year).
-- Depending on the working hours of the employees and the date of joining for the first year ( for new hires)0041 info type the eligibility gets varied and reduced. Ex( employees who joins on start of fiscal year and works 40hrs per week schedules is eligible for 200hrs of PTO. Employees who join in the month of august and works for 35 hrs per week ( i.e mid of fiscal year) would get 91 hrs of PTO.
I need to put this in the system. I am thinking this could be done with out tweaking PCR.I need help in configuring this in Absence quotas as to what are the things i need change in system config and how do i do it. Please help with some screen shots if possible. I really need this to get it done ASAP. Looking forward for help.
Thanks,
Chowdary.

We use TM00 schema. Can i call TS15 and TS 12 rules into TM00 acheieve my issue of quota entilements?
Iam doing this because my businees needs to see if an employee chages his work schedule from 40 to 30 or 20 etc.. the PTO has to vary accordingly.
As the minimum eligibility is to work for 20 hrs to avail the PTO days. If at any point the employee drops it under 20 he will not be eligible till he work any this >= 20hrs per month so the evaluation has to check periodically to update the quota availability.... I need help plz suggest ...

Issues with iMessage when switching data carrier (wifi - cellular)

So I have had this issue with my 5S and now my 6+ in iMessage. Not *always* but often enough I've run into issues sending messages via iMessage when I associate with wifi in that they don't send. I'll get an error message saying "not delivered" and it will stack as many outgoing messages I try to send. However, if I force the first message to send as text, subsequent messages will go through afterwards without issue. If I go from wifi to cellular I have no issues whatsoever and when I have these issues on wifi, my data works fine (incoming emails, Facebook notifications, etc.). I used to run cellular data only because I had unlimited but now I have a cap so I intend on using wifi when possible...but to have to send my first message as a text just so I can use iMessage is annoying...

Hi there BigDogg795,
I would recommend taking a look at the troubleshooting steps for iMessage found in the article below.
iOS: Troubleshooting Messages - Apple Support
To resolve issues with sending and receiving iMessages, follow these steps
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you still can't send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that the contact you're trying to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
-Griff W.

Issue with tablespace

Similar Messages

Maybe you are looking for