Issue with Teradata access from Business Objects AIX Machine

Hi,
I am using BO XI.31 which is installed on AIX 5.3 machine. I have installed Teradata driver on the machine and I have created the require ODBC.ini entry to point Teradata database. While refreshing the report I am getting below error message.
A database error occured .The database error test is (CS) "DBDriver failed ot load: /BOBJ/xi_3.1...Connectionserver/libdbd_tdodbc.so
0509-022 Cannot load module/BOBJ/xi_3.1....ConnectionServer/libdbd_tdodbc.so
0509-150 Dependent module libodbc.a(odbc.so) Could not be loaded.
0509-022 Cannot load module libodbc.a(odbc.so)
0509-022 System error:A file or directory in the path name does not exist.
Any body know what are the steps require to access teradata database from AIX box

Hi Jacks,
Following information might help you to resolve the issue.
This is caused by a wrong HOME environment variable of the user that starts the BO processes.
Resolution
Check the correct path of your BO 3.1 installation and export it as HOME environment variable:
Example:
BO 3.1 installation path: /home/<bouser>/bo3.1/Enterprise12.0../...
Type in the command line:
export HOME=/home/<bouser>/boversion
You can also change this environment variable permanently if you edit the .profile file of the BO user (home/<username>/.profile), adding the above line into the file, then source it again with:
. .profile
or with a logoff/logon of the session.
Check if the path of your HOME is correct with:
env | grep HOME
Now you can run the installation setup without any error.
Regards,
Sarbhjeet Kaur

Similar Messages

SAPBI data accessing from Business objects and other OLAP tools

Hi,
We already have heavy usage of Business Object, Essbase and are planning to implement SAPBI 7.0
    a) We are planning to connect our existing Business
        Objects infrastructure onto the new SAPBI platform, Did
        You experience any issues such as performance,
        config issues, delays, web issues.. is there any
        document or link with steps involved in integrating
        Business objects and SAPBI
     b) Can Bex analyzer gives simliar functionalities that
        are in Essabse front- end (EXCEL), I know that the
        backend data managament is quite different, but my
        question is around user interface, do you have any
        comparisons between these two tools.
     c) Is it possible to get data from SAPBI using external
        reporting tools (OLAP) such as Oracle Discoverer ...
Regards,
Raman

if the export to XML file is successful, the file will not be deleted if you are creating it from Metadata Exchange.
The file gets deleted in case you are using the create universe option and by default the file is created in %LINK_DIR%\log\MetadataExchange, you will also see ME_errorlog.txt and ME_outputlog.txt if there are any errors, do you see and erros in these files if you are creating the Universe directly from DS Designer ?
to use Metadata Exchange do the following
Open Data Services Desginer
Click on tools Menu -> Metadata Exchange
In the Metadata Exchange window
Select Export Data Services metadata to a file
Select DI CWM as metadata format
enter location for xml file (C:\temp)
Select the datastore you want to create Universe for
Click OK
Check for file named repo_export.xml in the C:\temp folder or the folder that you specified
Open Universe Builder and Select
Data Integrator bridge
and use the xml file as input to create universe

Access 9i OLAP from Business objects

can anybody help me to access 9i OLAP from Business objects, by any document or demo or step by step instructions , as i'm new in this field
thank you

For testing and POC purposes you can access the bridge software here:
ftp://ftp.businessobjects.com/pub/incoming/UBSetup_For_Ora_10104.zip (please type the entire path including the file name, you cannot navigate through this location)
For users who are using the BO 6.5.1 in particular, they need to install the following patch, otherwise the created universe won't work:
ftp://ftp.businessobjects.com/pub/incoming/patch_bobj_651_HF_497.zip (necessary for BO 6.5.1 ONLY, do not install this patch for other BO versions )

Issue with assistive access not keeping permissions

Since a recent upgrade (likely from OS X 10.9.x to 10.10.2) I've had issues with Assistive Access blocking Automator and Applescript from interaction with dialogs.
If I run my script or my Automator workflow (which basically has the same script in it) I get the error:
System Events got an error: Automator is not allowed assistive access. (in the case of Automator).
If I open Automator, and then untick and retick the Automator entry in the Accessibility options within Security & Privacy (System Preferences), then workflow can run again. It continues to work until I Quit Automator. Then it's as if OS X no longer trusts Automator to be the same app I gave Accessibility permissions to. And the situation repeats. It's much as if it were not code-signed. The exact same issue plays out with Apple Script.
I came across this info, which I hoped would solve the problem, but it made no difference: http://macscripter.net/viewtopic.php?id=43394 and http://bit.ly/1x3SRmc
In my Accessibility permissions I now have:
Script Editor
Automator
1Password 5 (which the script interacts with)
com.apple.security.agentStub.xpc (in case that's being called up and triggering the Accessibility issue)
osascript (in case that's handling the script and triggering the Accessibility issue)
SecurityAgent.xpc (in case that was triggering the Accessibility issue)
I added all these because the post at http://bit.ly/1x3SRmc indicated that anything Apple Script is interacting with needs Accessibility access permissions.
My script is as follows:
set appName to "SecurityAgent"
set passApp to "1Password 5" (* set this to the name of your password manager *)
tell application "System Events"
if not (exists window 1 of process appName) then -- test if SecurityAgent window exists
set answer to display dialog "The password dialog was not found. Please check." buttons {"Ok"}
return -- abort if SecurityAgent window does not exist
end if
end tell
tell application "System Events"
set position of window 1 of process appName to {10, 10}
-- move SecurityAgent window out of the way
end tell
activate application passApp
tell application "System Events"
tell application "SystemUIServer"
set answer to display dialog "Make sure correct 1Password item is actively selected (i.e. click it again if it was previously selected), then click “Continue” to proceed." buttons {"Continue"}
end tell
tell process passApp
(* If you are not using 1Password, you may need to change the menu item clicks, below, to whatever is correct in your particular password manager *)
click menu item "copy password" of menu "item" of menu bar 1
delay 1
set appData to the clipboard
end tell
tell application "System Events"
tell process appName
set value of text field 1 of window 1 to appData
if exists (text field 2 of window 1) then
set value of text field 2 of window 1 to appData
if exists checkbox 1 of window 1 then
if value of checkbox 1 of window 1 is 1 then
click checkbox 1 of window 1
end if
end if
set value of checkbox 1 of window 1 to 0
delay 1 (* gives a moment to see what's going on *)
click button "OK" of window 1
else
if value of checkbox 1 of window 1 is 1 then
click checkbox 1 of window 1
end if
delay 1 (* gives a moment to see what's going on *)
click button "OK" of window 1
end if
end tell
end tell
end tell
In Automator it would appear the script is generating an error as soon as it reaches line 5, "if not (exists window 1 of process appName) then"
I would greatly appreciate some assistance in resolving this issue.

Starting with Mavericks, Apple changed the way that the accessibility works (see Using AppleScript with Accessibility and Security features in Mavericks) - each individual application needs to be given access, instead of a global option. A regular AppleScript application saves properties and global variables with the script, which makes it a new application as far as the system security is concerned, so it needs to be re-added to the accessibility list. To work with this new security feature, you need to code-sign your AppleScript application or make the script(s) in the bundle read-only so that they don't get changed (note that an AppleScript-based project in Xcode does not modify the application bundle by saving properties and globals).

Access Controlled Business Object ??

Hello,
Can anyone share few views about Access Controlled Business Object and RBAM Data. I have never used them before and wanted to know more about these like how it affects the security and all.
Please dont point to any reference links or pdf's to see the info abt Access Controlled BO's becoz I have already read enough material and all I had is confusion .
So, kindly share your personal views about this topic here rather than referring a document which is somewhere else.
Thanks in advance.
regards,
vatsav

Hello Vatsav,
I have used an employee association with access context to "1000 - Employee Self Service" and
"1003 - Management". It works very well.
In my case simple business user should see only their own data (1000 - Employee Self Service) and a business user with a management role (1003 - Management) can see all data.
If you want to use a different logic (such as access context code 1000/1003/1007), maybe you have a problem.
Regards,
Kay Kressner

I am having issues with streaming music from iTunes on my MacBook Pro to my audio system through AirPlay. Works perfectly with my iPod Touch. The AirPlay icon appears irregularly in iTunes and when selected doesn't connect. Running latest IOS software.

I am having issues with streaming music from iTunes on my MacBook Pro to my audio system through AirPlay. Works perfectly with my iPod Touch. The AirPlay icon appears irregularly in iTunes and when selected doesn't connect. Running latest IOS software.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
You said:
No, I do not want to "factory reset" my iPod. No I do not wish to do anything crazy long or hard to fix this.
That may be necessary, It is not what you want to do/not do but what is required to resolve your problem.

Problem with create universe on Business Objects XI 3.1 base on SAP Query

Hello,
I have a problem with create universe on Business Objects XI 3.1 base on SAP Query.
The problem is hierarchy. Massage on Busines Objects is :
OWBS_ELEMT__ISTKOSZT(cube ICPC01/BEX_ICOC01):Exception condition "HIERARCHY NOT FOUND" raised.(WIS 10901)
Query in BEX run OK.
Best regards.
Ela.

Hello,
Thanks for response.
When I run BEX QUERY, all works OK.
All hierarchies was created and activated on system BW.
This situation appears after upgrade BW to SAP NetWeaver 7.3.
Before upgrade I created universe without any problems.
Regards Ela

Calling BSP Application from Business Object?

Hi,
Can any one tried to call BSP Application from Business Object for showing in the Portal.
I have the following Scenario:
1. BSP Page: User will input the Date and Submit to store in the Database. and in this page the Workflow will be truggered and a Work item will be sent to the Next Level User.
2. When he executes the Work Item it has to trigger the BSP Application and has to show in the Enterprise Portal.
All this has to happen in the Enterprise Portal.
If any one knows how to triggere from business object, please let me know.
Thanks & Regards
Sumanth

Hi Vijay,
Thanks for the information. Its long back i was working on this, but not successful,
Now the similar requirement i need to develope in R/3.
I checked the mentioned class in R/3 4.7, This class is not available. I hope this is only in CRM because of PC-UI.
Any Suggesions how can i achieve this execution of BSP.
In one of the document i saw the Business Object BUS1006 as an example but i could not locate the way to reutilize the similar way.
Thanks & Regards
Sumanth

Issues with RAW files from my 7D

I have Aperture 1.5.6 on my computer and the software updater says that is the current version. I shoot with a 20D and a 7D. I upload my raw files to Aperture and edit them from there and then process for a jpeg. However, every time I upload a raw file from my 7D I get the following message when I click on it to edit it: Unsupported Image format.
Any words of advice, other than just buy Aperture 3??

I have Aperture 2.X and had zero issues with RAW files from a 7D, so I think the problem is you are on 1.X. Converting to DNG first was a good suggestion if you don't want to purchase 3.X. Yet another reason to hate proprietary raw image file formats.......

Where can I find information on migrating from Business Objects 5 to XI R2?

We want to migrate several Business Objects implementations - some of which are Business Objects 5 and some Business Objects 6 to consolidate them into a XI R2 environment.
I have the document that describes migration from 6.x to XI R2 but what is the process for migrating from Business Objects 5. Do I need to migrate from 5 to 6 and then follow the 6.x to XI R2 migration?
Any pointers to additional hints and tips on migration or how to estimate how much effort is involved would also be welcome.
Thanks in advance for your help.

Hi,
Following are the detailed steps for migration via Import Wizard:
1] Go to Start > Programs > Business Objects XI Release 2 > BusinessObjects Enterprise > Import Wizard.
2] The Welcome dialog box appears. Click Next.
Setting source and destination environments:
3] In the Specify source environment dialog box, set the following:
u2022 Source: Business Objects Enterprise BO 6.5.x.
u2022User Name:
u2022 Password: visor
BOMain key
Note: Do not check the Import Application Foundation contents option since you are not performing Performance Management migration at this time.
Click Next.
4] The Warning page appears. Click Next.
Note: The source repository can store any file, not just supported agnostic documents. Since the BusinessObjects XI Release 2 architecture requires a plug-in for each file extension, it does not import unsupported files (for example, .zip files and as .svg documents used in corporate dashboards).
5] The Specify destination environment page appears. Set the:
u2022 Destination: Business Objects Enterprise BOXI R2
u2022 User Name:
u2022 Password:
u2022 Domain key file to: Default drive: \Business Objects\BusinessObjects Enterprise XI R2
Click Next.
6] Select the types of objects you want to import in this stage of the importing process. At a later stage, you select the objects themselves.
u2022 Select the option u2018Import universes u2018.
Click Next.
7] Import options for universes and connections dialog box appears.
Select the third option: Import all the universes and connections that the selected Web Intelligence and Desktop Intelligence documents use directly.
8] The Please choose a merge scenario dialog box appears. Select I want to merge the source system to destination system and check the automatically rename top-level folders that match top-level folder on the destination system option.
Click Next.
9] The Incremental Import dialog box appears.
You may need to import some objects more than once from the source repository to the destination repository.
In this situation, you have the following update options:
u2022 Overwrite object contents
You select the types of objects for which the content overwrite applies:
u2022 Documents (including dashboards and analytics)
u2022 Universes
u2022 Connections
When you re-import an object, it will completely overwrite and replace the matching object (and its associated files) that you imported earlier.
u2022 Overwrite object rights
When you re-import an object, its associated security rights will overwrite the rights of the matching object you imported earlier.
If you decided not to import security in the Security Migration Options dialog box, then the Overwrite object rights option is not relevant, and is therefore not available.
If you don't select any overwrite options, the matching object in the destination repository will not change when you try to import it again.
Note: This dialog box appears only if you select update as the import scenario.
Click Next.
10] Select the specific universe
Click Next
11] Information Collection complete dialog box appears.
Click Finish
12] Import Progress dialog box appears.
Click Done
Hope this helps !!
Please revert in case of any queries.
Regards,
Deepti bajpai

How to migrating from Business Objects to OBIEE

Hi,
I have one query is it possible migrating from Business objects to OBIEE ? if, yes could you tell me any one regarding this requirement.
Advance Thanks.

Hi,
I don't have any documentation link , we need to design rpd based on BO Universe and BO reports functionality.
first observe what are the physical tables used in universe those physical tables improted into physical layer of obiee rpd give physical joins. In BMM layer design hierarchies, calculations and outerjoins all these things done in BMM layer thats it.
Regards,
Naresh

Report Writer - Converting from MS Access to Business Objects Tools

In 2008, my company migrated to SAP. Security has forced all report writing to use business objects (specifically WEBI); however, WEBI is very very difficult to use. The data in the universe doesn't always match what SAP has and the tool itself doesn't give the robust manipulation that Access does. I have tried to tell the company I need access to the universes through MS Access in order to create the reports automatically and allow interactive databases; however they refuse to give me ODBC access (against policy). Right now I have no alternative but to do daily downloads from SAP in order to feed my robust databases.
Can anyone suggest what business object tool I should use that will replicate what MS Access does for me?
Easy report writing with robust design (including charts)
Easy front-end tool for end users
One to many relationships needed
Efficient/Automatic (no need for daily downloads)
End users can interact with reports (enter data for later analysis)
What about Crystal Reports? What are the limitations and can it do what MS Access does for me today?
Should I be posting this question in another forum?

Hi Amy,
CR 2008 is the complimentary version of CR Designer when connecting to BOE 3.1. You can get an update to Service Pack 3 and then possible SP 4:
https://smpdl.sap-ag.de/~sapidp/012002523100007123572010E/cr2008_sp3.exe
https://smpdl.sap-ag.de/~sapidp/012002523100008782452011E/cr2008sp4.exe
But before you do that check with the BOE admin, SP's should match also but not required.
They should work together, When you use the Report Wizard you'll see an option to connect to Enterprise and then log in using your User account and then the Repository will have the Universes available. Remember this is all set up by the Administrator so you will need the Admin person to grant you access to the Repository as well as anything else you need access to. Once you create the report then you can Publish them to your folder or a common folder and the Admin can then share your reports.
WEBI is what the name implies, it's a WEB interface to allow you to create reports using it's Report Wizard. It does take some getting used to and you should have training available, check with your admin group again. Same as CRD, it tool allows you to create reports but is much more flexible than WEBI is in a few ways but once you understand how WEBI works it has some very powerful tools also.
CR allows you to access any database field you have permission to see, it fully supports database permissions. So if you can't see them again you have to ask your DBA to grant you permissions. You can then link tables including your late entry table if it is separate or simply hitting the refresh button in the viewer will requery the DB for new rows of data. All depends on how it's set up.
As for security, this is a decision your company has made. SAP is just a tool that allows you to be secure. With today's security threats and other privacy laws and hackers abilities to get to and cause personal harm to those affected it's just the way things are these days. Take this up with your Management, it's not something we can decide for you and certainly can't provide you with ways to circumvent the security.....
There is training available for both WEBI and CR as well as third party Help for books available. Downloading the sample reports is a great place to start, you can switch between Design and preview mode and see what happens when you make changes....
Thanks again
Don

Error while accessing Method from Business Object

Hello Experts,
I have created a business object ZBUS7051 by using BUS7051 as a Supertype. I have crated a method GET_DATA in ZBUS7051. If I use BUS7051, Method GET_DATA in a standard task, getting a message that Method GET_DATA not defined for object type BUS7051.
Why I am getting this error? Is there way I can use BUS7051-GET_DATA instead of ZBUS7051-GET_DATA.
The workflow triggering event is BUS7051 u2013 CREATED. In the workflow binding, system is showing a warning that u2018Conversion from BO.BUS7051 to BO.ZBUS7051 can cause data-related errorsu2019. How to fix this? Please let me know.
- Krishna.

Thanks to everyone.
I have delegated the custom business object to super type BO 7051. I triggered the workflow using T.Code: SWUE, BO: BUS7051. Event: CREATED. But the workflow is resulted an error as given below.
Problems occurred when generating a mail
Error '9' when calling service 'SO_OBJECT_SEND'
Work item 000000503335: Object BUS7051 method WAIT_1_MINUTE cannot be executed
Object does not exist
Object does not exist
Object does not exist
Variables of the work item text cannot be generated
Syntax error in expression &NOTIFICATION.NUMBER&
(This is a Wait Step, Created in ZBUS7051, Method: WAIT_1_MINUTE)
Since the delegation has done, I can say BUS7051 - WAIT_1_MINUTE, instead of ZBUS7051- WAIT_1_MINUTE. Is it correct?
Could some one please let me know, How to fix the above issue?

Problem with Dynamically accessing EJB Class objects in WL 7.0 SP1

I am trying to build a component which has the ability to instantiate and execute
an known EJB method on the fly.
I have managed to build the component but when I try and execute it I get a ClassNotFoundException.
I know that the EJB I am trying to invoke is deployed and available on the server,
as I can see it in the console, I also seen to have been able to get the remote
interface of the object, my problem occurs when I try and access the class object
so I can perform a create on the object and then execute my method
The code I have written is below:
private Object getRemoteObject(Context pCtx, String pJNDIName, String pHomeBean)
throws Exception {
     String homeCreate = "create";
     Class []homeCreateParam = { };
     Object []homeCreateParamValues = {};
try {
//This call seems to work and doesn't throw an exception
Object home = pCtx.lookup(pJNDIName);
//However this call throws a java.lang.ClassNotFoundException
Class homeBean = Class.forName(pHomeBean);
Method homeCreateMethod = homeBean.getMethod(homeCreate,homeCreateParam);
return homeCreateMethod.invoke(home, homeCreateParamValues);
} catch (NamingException ne) {
logStandardErrorMessage("The client was unable to lookup the EJBHome.
Please make sure ");
logStandardErrorMessage("that you have deployed the ejb with the JNDI
name "+pJNDIName+" on the WebLogic server ");
throw ne;
} catch (Exception e) {
logStandardErrorMessage(e.toString());
throw e;
Any advice would be really appreciated, I'm fast running out of ideas, I suspect
it has something to do with the class loader but I'm not sure how to resolve it
Regards
Jo Corless

Hello Joanne,
Congratulations! I'm very happy that you've managed to fix your problem. It's
always essential to understand how to package applications when deploying on BEA
WebLogic. Usually, by throwing everything into an EAR file solves just about all
the class loader problems. :-) Let us know if you have any further problems that
we can assist you with.
Best regards,
Ryan LeCompte
[email protected]
http://www.louisiana.edu/~rml7669
"Joanne Corless" <[email protected]> wrote:
>
>
I've fixed it!!!!!!!!
Thanks to everyone who gave me help!!!!
The class loader was the culprit which is what I suspected all along.
As soon
as I put the 2 jar files I was using into an EAR file the problem went
away!!!!!
Thanks again
Jo Corless
"Ryan LeCompte" <[email protected]> wrote:
Hello Joanne,
As Mr. Woollen mentioned, I also believe it's a problem with the class
loader.
You need to be careful how you arrange your EJBs, because WebLogic has
a specific
method in which it loads classes in an EAR, JAR, and WAR file(s). Please
refer
to http://dev2dev.bea.com/articles/musser.jsp for more information about
BEA WebLogic
class loading mechanisms and caveats. Also, try printing out the various
methods
that are available on the object that was returned to you via reflection.
For
example, use the getMethods() method, which returns an array of Method
objects
that you can subsequently cycle through and print out the various method
names.
This way you can discover if the class found/returned to you is indeed
the one
you intend to locate.
Hope this helps,
Ryan LeCompte
[email protected]
http://www.louisiana.edu/~rml7669
Rob Woollen <[email protected]> wrote:
I believe the issue is the home interface class for this EJB is not
available in the class loader which is doing the reflection.
If you do:
getClass().getClassLoader().loadClass(homeInterfaceClassName)
I suspect it will fail. Reflection still requires that the class be
loadable.
-- Rob
Joanne Corless wrote:
Hi Slava,
If I make my code look like you describe below I get a compliationerror telling
me that
home.getMethod() is not recognised (no such method)
If I change it slightly and use
Method homeCreateMethod =
home.getClass().getMethod(homeCreate,homeCreateParam);
The code will compile OK but when executed it still throws a NoSuchMethodException
Any ideas ?
Thanks for your help so far
Regards
Jo Corless
Your code should look like
Object home = pCtx.lookup(pJNDIName);
Method homeCreateMethod =
home.getMethod(homeCreate,homeCreateParam);
return homeCreateMethod.invoke(home, homeCreateParamValues);
Regards,
Slava Imeshev
"Joanne Corless" <[email protected]> wrote in message
news:[email protected]...
Hi Ryan,
I also wanted to mention that if you do a "header search" in this
particular
newsgroup
with the search query as "reflection", you will see many previousmessages
regarding
reflection and EJBs. I believe you could learn a lot from thedifficulties
that
others have faced and solved.I tried that and although there was a number of similar cases noneof them
actually
seem to fix my issue. Thanks for the suggestion though
Are the EJBs that you are trying to access accessible via your
system
classpath?
Try to avoid having them accessible via the main system classpath,and
only bundle
them in your appropriate EJB jar files (contained in an EAR file,for
example).Maybe I should have laid the problem out a little clearer.
I have a number of EJB's bundled up in a JAR file which is hot deployedto
the
server. Within this first JAR file is an EJB (SSB) component that
needs
to
be
able to invoke a known method on another EJB. This second EJB may
or
may
not be
within the first JAR file but it also will be hot deployed.
The component trying to invoke the method on the 2nd EJB has to
be
able to
create
an instance of the 2nd EJB without actually knowing anything bar
a
JNDI
Name which
is passed in at runtime.
I can get as far as doing the
Object home = pCtx.lookup(pJNDIName);
This returned a class with the name
"com.csc.edc.projects.allders.httppostoffice.postman.PostmanBean_mp8qy2_Home
Impl_WLStub"
My problem seems to occur when I try and invoke the create method
Method homeCreate = home.getClass().getMethod("create", new Class[0]);
My code throws a java.lang.NoSuchMethodException at this point so
I
am
unable
to progress to the next step of :
Object bean = homeCreate.invoke(home, null);
So I can return the instantiated bean back to the calling client.
Why am I getting the NoSuchMethodException, is is because I am gettinga
stub
back rather than the home interface and if so how do I get the truehome
interface
from the bean
Thanks in advance
Jo Corless

Issue with file download from BLOB type data

i have been using this for a while, with no problems, including on hosted machines.
the upload to the database works fine.. not the issue, and the download script also works fine, on the local WAMP machine.
but once moved to the server it fails.. the query does not work.
i have a feeling that it is something to do with the managed hosting i am using, but they say no, i have tried it on 2 seperate hosted machines (different providers), with no joy.
if i run the select query on the hoisting server via phpmyadmin, the query runs ok.
any suggestions as to what may be causing the problem on the server compared to the local WAMP machine?
i really don't know where to start looking, or where to point the hosting company.
This is the php code to download the blob data, works fine on local WAMP setup, browser asks if you want to save the file/open etc. as expected.
<?php require_once('Connections/connTracker.php'); ?>
<?php
// if id is set then get the file with the id from database
if(isset($_GET['docindex']))
           {$id    = $_GET['docindex'];
        $query = "SELECT document_name, document_type, document_size, document_content " .
           "FROM tracker_documents WHERE document_index = ".$id;
*** seems to be failing here when running the query ***
$result = mysql_query($query) or die('Error, query failed');
           list($name, $type, $size, $content) = mysql_fetch_array($result);
     header("Cache-Control: maxage=1"); //In seconds
   header("Pragma: public");
     header("Content-length: $size");
           header("Content-type: $type");
           header("Content-Disposition: attachment; filename=$name");
           echo html_entity_decode ($content);}
exit;
?>

Hi Gun,
You are the only one responded to my issue. I have allocated some points.
Yes. I have checked the assignment in CRM organizational model.
I did download the org. structure from ECC 5.0
All objects including sales offices are activated for determination and I have verified with green light
As per your suggestion if the sales area data is not matched between the two systems, then how come the error will not reappear during the bdoc reprocess?
What is missing during the first time bdoc process? Looks something is missing for validation module?
Any inputs?
Thanks,
Raj

Issue with Teradata access from Business Objects AIX Machine

Similar Messages

Maybe you are looking for