Issue with TestStand 2010 or 2012 hanging on the first step after continuously running TestStand?
I am having issues with a CVI test sequence hanging in TestStand 2010 & 2012. Currently, the only way to resolve this is to exit/close TestStand. Following this we must replace the entire project with a backup project. This only occurs about once a day or so with the sequence running continuously. It will hang on the first or second step in the sequence, usually the first step. The project uses several continuous XINET CAN messaging, so I wonder if this could be related to that.
Yes, I have. It hangs at the first statement in the code after all the variable defines. It does seem to be related to any particular statement, as we had skipped that test step, and then it hangs on the next step at the first statement.
Similar Messages
-
I have a 8 slot PXI system with 2 NI PXI 6508 and 1 DMM 4070 in it. I want to get started with programming the digital I/O cards (6508)! How can I use this cards with LabView 7?what is the best way to get started, or where can I get examples showing how to use the several channels?
Thanks!
PhilippPhilipp,
The best way to get started is to decide if you want to use traditional NI-DAQ or NI-DAQmx. Recently we released NI-DAQ 7.1 which provides NI-DAQmx support for the PXI-6508. In my opinion, NI-DAQmx is more efficient and much easier to use.
To get started with examples, simply launch LabVIEW and go to Help>>Find Examples. Then expand Hardware Input and Output>>DAQmx and select the appropriate digital group for your application. This should help get you started.
Please repost if you need addition assistance. Good luck with your application! -
Issues with Office 2010 and Acrobat Pro 8
Good Day All;
We are in the middle of upgrading from Windows XP to Windows 7 with Office 2010 and I was wondering if there are any issues with importing Office documents into Acrobat Pro 8. I have found out that there are a couple of issue with Office 201 and LifeCycle Designer.
Any comments would be helpful
Regards
ChompAcrobat 8 is not compatible with Microsoft Office 2010 and the PDFMaker plugins will not install. Only Acrobat X is compatible with Office 2010, and at this time only in 32-bit mode.
Acrobat 8 is also not officially compatible with Windows 7, again Acrobat X is the first version to carry approval for that OS. It will still install, but Adobe cannot guarantee it will operate perfectly in all cases, and doesn't provide install support for that combination. -
Hi Team,
We are facing issue with Word 2010.
User has created a document in Word 2007 and they inserted a symbol °C in Times New Roman and Areal.
Please find below the text which has issue.
干燥温度：60℃
温度：95℃，
In the document, instead of ℃ it is showing blocks, when we open it in MS Word 2010. (Eg: 60℃, 95℃).
We have tried the following.
1. If we select the square and click on any other font, it will change to °C with formatted font Cambria Math. We can have it by selecting any font.
2. I have tried to copy the line and paste it to excel/WordPad/notepad
• Excel(2010) : It is displayed properly(°C) but the font was Times New Roman and Arial as the word document has Times New Roman and Arial respectively.
• Notepad: It is displayed properly(°C) but the font was Lucida Console
• WordPad: The symbol is not displayed correctly (Squares and vertical lines). It is having the same issue as we have with word document.
3. I just selected the whole text and had Ctrl+space , then all the corrupted characters turned to original one (°C with formatted font Cambria Math) : we can use this as a work around.
4. I have created a word document and I typed °C in that document with fonts Times New Roman ,Arial, SimSun and STKaiti and saved the document. When I opened the document I was able to see °C properly.
Kindly help.
Regards,
SoorajHi Sooraj:
For checking the encoding of your documents, please follow below steps:
Rename your documents from xxxx.docx to xxxx.zip
The zip folder will contains basically folders: rels, docProps, word and one [Content_Types].xml
Browse to word, open document.xml file,
<?xml version="1.0" encoding="UTF-8" standalone="true"?>,
the first line will suggest the encoding type of the document.
Except checking the encoding difference, could you please do one more thing that is copying the font like
“Times New Roman” from a computer which display the symbol correctly to the computer which has issue, and please let me know the results, thank you. -
Weird issue with Exchange 2010 Room Mailboxes - allows multiple booking of the created meeting rooms
Hi,
we are facing weird issue with Exchange 2010 Room Mailboxes
it allows multiple booking of the created meeting rooms.Sometime we are not getting acceptance or declined mail but and we could see our meetings has been booked at slot.
for e.g.
User A booked room1 with weekly recurrence for time 4pm to 5pm., and User B made his booking other day,without realizing that user A meeting is exists.
Neither of user A nor user B got declined/rejected emails.
please sahre guidelines if anyone known to this issue.
Note - Allow Conflict booking is disabled already :) but still have issue
Thanks,
NPratikHi,
Just add more in this issue, following testing is done.
referring results and conclusion, you will get better view on issue
====================
Test Case - 1
User OnCloud/O365 - Pratik Nimbalkar
Email ID - [email protected]
( same as UPN)
Room Booking Scenario - Book Room for 6.30pm to 7.30pm slot
Results - Accepted
Room Booking Scenario for same slot- ReBook Room for 6.30pm to 7.30pm slot
Results - Declined
Conclusion = working fine
==================
Test Case - 2
User OnCloud/O365 - Testsm
Email ID - [email protected]
( different from UPN)
Room Booking Scenario - Rebook Room for 6.30pm to 7.30pm slot
Results - No Response from Room Mailbox neither Accepted nor Declined
But we can see as booked as "Tentative"
Room Booking Scenario for same slot- Rebook Room for 6.30pm to 7.30pm slot
Results -No Response from Room Mailbox neither Accepted nor Declined
But we can see as booked as "Tentative"
=========================
Conclusion = There is issue with booking room and not getting response while user is
@abc.my id.
======================
Note = for all other on premise users those are having @abc.co.in
and @abc.my it is working fine. Users are getting respective correct reply from room mailboxes.
This issue seems with only on cloud
@abc.my users -
I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!
I have created a navigation system on the master pages and set the presentation to links only mode. I also have other links scattered throughout the program, like a linkable table of contents, etc. Some of them work, some of them don't. Not sure why. Anyone out there having similar issues? Or have any idea on how I can solve this issue? Any help would be appreciated!
Thanks!Links should not create any problems in Keynote. If they are set up correctly on text, the text will be underlined. Objects that have links will have a curved arrow bottom right, if you click the arrow a popup will display the link information.
Try this repair for Keynote, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
4
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
5
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
6
when complete, restart the Mac normally, Apple menu > Restart
7
install Keynote from the Mac App Store
let us know if this helped -
I'm having a billing issue with my apple id. I got my first iPhone today and I've signe din etc however before i can download any apps etc i need to resolve an old payment apparently. The problem is i cant enter my new card details because the issue is registered to when i was in America and i require to pay the funds from an American source. Any ideas how i can resolve this? It wont accept my new card detail as im back in the UK. I think i have posted this in the wrong area but anyone got any ideas?
I have managed to change the rest of my accoutn being registered to the UK i think except thisHi..
You can email Apple for help but the link is for the iTunes store not the Mac App Store. You've inadvertently poasted in the Using Mac App Store forum but that's ok. Billing issues are the same for the iTunes Store.
Click here > Apple - Support - iTunes Store - Contact Us
It wont accept my new card detail as im back in the UK
Your credit or debit card credentials must be associated with the same country where you reside.
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
From here > The Complete Guide to Using the iTunes Store | iLounge Article -
My Magic Mouse (wireless) paired with my 2010 iMac: Often at startup the cursur just sits in top left corner of screen, frozen. Not a battery problem. New. I take batteries out, reboot (a real pain)... then ok. HELP!
Hello:
Try resetting the PRAM and SMC.
Barry -
My debit card kept getting rejected by my iTunes account, it there an issue with iTunes? I have been using the same Card since very long time. I downloaded the iOS 8, can I talk to someone so I can get this resolve?
Apple is not here. Contact Apple to resolve your issue:
iTunes Support WorldWide
or
iTunes Support by eMail ww
Cheers,
GB -
We had some accuracy issues with NI 5112 scope in one of the ATE and then I decided to perform self calibration using Labvidew vi to perform “niScope_CalSelfCalibrate(handle, "", 0);” function.
But it made it worse. I tried using option 2 to restore but it did not work.
Could you pls advice me to resolve this issue.Hi Ana10,
Are you using this digitizer with NI VideoMaster? if not you should probably post this in the Digitizer forums. That said I would suggest using the self calibrate function in MAX for this device rather than the LabVIEW API method just so that you can rule out any errors in correctly configuring the digitizer for self cal in LabVIEW. Also you should ensure that all inputs are disconnected before performing a self cal. If this still results in an error in calibration you could refer to the following document or arrange to return the digitizer to NI for external calibration.
http://www.ni.com/pdf/manuals/370328e.pdf
Hope this helps,
Nick -
Skype Windows client hangs for the first call - co...
Hi,
Skype on my Windows 8.1 (depending on its mood) hangs for the first call. It will keep ringing and ringing till it times out, during that time I am not able to hang up the call as well, the red hang up button doesnt work and we have to let the call go on till it drops on its own. Then on the second try it connects perfectly fine. This happens most of the times, there are only a few days where it connects on the first try otherwise its always the 2nd time.
Please let me know what could be the possible solution for this one?
ThanksHi Marcin,
This forum is mainly for talk about the product use related issue and not the best place to talk about the develop issue, for the develop issue we can post in MSDN forum for
the further help and your issue may need capture a dump then for the further analysis it is not an efficient way to work in this community since we may need more resources which is not appropriate to handle in the community. I‘d like to suggest that you submit
a service request to MS Professional tech support service so that a dedicated Support Professional can further assist with this request.
MSDN forum
https://social.msdn.microsoft.com/Forums/en-US/home
Please visit the below link to see the various paid support options that are available to better meet your needs.
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
Thanks for your understanding and support.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Process Chains Always Hangs at the second step waiting for an event
Gents;
all BI process chains created in Production system are always hanging in the second step waiting for an event RSPROCESS with a certain parameter. This issue is happening for all process chains in Production system and it is not happening for the same in other systems in the landscape (development, Copy of porudction, quality and so on). I tried to trigger the event manually using SM62 but the job is always stick to status " released". the same thing was replicated in other systems and the job status has changed and the process was completed.
Any idea what might cause this issue??
Thanks.Hi,
You said that this thing is happening only in production system.Try doing the following checks :
1.Check SM21to see if there are any red entries.It can be possible that there is some data base RFC connection failure.While checking SM21, make sure you give proper selection condition.If there are any red entries, you may take the help of basis guys to understand the type of failure.May be file system has got some problems.
2.Check St22 and try to analyse if any short dumps.
3.Try to check Connection with the source system ( Goto RSA1->source system tab->right click on the source system and select check option to find if any errors in the connection.
4.If possible, try to load manually in some other info provider.
Thanks,
Tarun Brijwani. -
I am not allowed to sign in with my Apple ID on iTunes Connect when I am trying to publish my book in iBooks Author. I do not understand why because I have fulfilled the first steps creating an account and informed my IRS tax number...
The recommendation is always to make another ID for use with a paid books account. And while I can't swear this is at the root of your issue, you should in any case reach out to Apple for assistance on this one, I think.
Account Applications:
[email protected]
Global Phone Support
We have expanded English-language publisher phone support. To make contacting the iBookstore support even easier, new local phone numbers are now available for Australia, France, Germany, Italy, Netherlands, Spain, and the U.K. Support is available Monday to Friday, from 7 a.m. to 5 p.m. (PT).
Country
Phone Number
Australia
1300 307 504
Note that this is a low tariff number.
France
0805 540 117
Germany
0800 664 5307
Italy
800 915 902
Netherlands
0800 0201 578
Spain
900 812 687
U.K.
0800 975 0615
U.S.
+1 (877) 206-2092
Toll-free from U.S. and Canada.
Good luck -
I have a problem with the touchsmart 420pc, after a running time (2 hour approx) is turned off,
good afternoon, I have a problem with the touchsmart 420pc, after a running time (2 hour approx) is turned off, probably warming, but this rare, is suddenly going slow parapadear and image.
also sounds like when damaged ballasts for lamps,
ANYONE know what could be the cuasa and / or what is causing this.
greetings and thanks in advanceHi,
Please write your TouchSmart model number, which system are you using and country of purchase.
Resource:
How Do I Find My Model Number?
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. ** -
My imac 10.6.8 hangs on the spinning wheel after installing Samsung Kies (KiesMac_2-0-0-13023_10_1).
I was able to restart ok after installation; I even moved some files from my
Galaxy 3 to the imac.
But on the next (and all subsequent) restart attempts, it hangs on the spinning wheel.
How to fix? Thanx in advance.Mac OS X: Gray screen appears during startup
Maybe you are looking for
-
Camera will not open need help
i have the 4th generation ipod touch and i have very few complaints the only thing i can really complain about its that when i try to open up my camera instead of opening up the screen stays black is there anything i can do to stop this from happeni
-
Hello, Is the Cobol Pro*compiler is available on Linux ?
-
Why doesn't 5 support other programs
why have you released and forced firefox 5 onto users when it does not support google or roboform
-
Hello All, Good morning We have a WT which we use to report to third party for hours worked and now i wanna add another WT (PTO taken) also to be reported, so rather than changing the config of program that we use for reporting, how can we add this P
-
HT2693 keyboard and screen protector affects display on retina macbook?
i have read the issue about the palm guard affecting the display here: http://support.apple.com/kb/TS4384 I am just wondering if using keyboard and screen protector will have the same effect if i put it on and close the shell cover?