Issue with the change of GL Account in MIRO.

We are having a situation where user Creates a Purchase order against a Cost Account and thus have a cost center as one of the account assignments. But when it comes to to MIRO, user changes the Cost Account to Balance sheet Account and posts the document.
The Miro documents post against the balance sheet with the cost center and system does not give any warning or error.
Any ideas on how to either stop the user from changing the GL in MIRO or make sure that it throws an error.

You could set up FI validations to make sure that when you enter a balance sheet account that you check the company preference. That could be no cost center or require a profit center. You define your preference. Use tcode MIRO and check balance sheet type account then check to be sure that cost center is not used. Validtions are in OB28.
pls assign points if helpful as a way to say thanks.

Similar Messages

  • Issue with the change pointer  for the reduced message type ZMATMAS

    Hi All,
    I have created reduced message type ZMATMAS for the MATMAS to create a Idoc when change or insert material master data fields( MARA-LAENG, MARA-BREIT, MARA-HOEHE) . My Problem is that the Idoc is generated with the status (03) but the fields(LAENG, BREIT,HOEHE)  are not getting fill with the values. They are always filling with the values  '/'). I have done the following steps to create idoc for the change pointer. Please check whether i have missed some steps.
    1.     Create reduction maintenance ZMATMAS  (Tcode BD53)
    keep the default selected segments E1MARAM, E1MAKTM
    2.     Add following data to maintain table view for the message type ZMATMAS  (Tcode BD52)
    Object      Table Name     Field Name
    MATERIAL       MARA      KEY
    MATERIAL     MARA     LAENG
    MATERIAL     MARA     BREIT
    MATERIAL     MARA     HOEHE
    3.     Activate particular change pointer in BD50
    Message Type       Active
    ZMATMAS         yes
    4.     Activate change pointers u2013 Generally (Tcode BD61).
    5.     Assign Segment fields to change document fields (Tcode BD66 )
    Segment Type     Field Name     Object     Table Name     Field Name
    E1MARAM     BREIT     MATERIAL     MARA     BREIT
    E1MARAM     HOEHE     MATERIAL     MARA     HOEHE
    E1MARAM     LAENG     MATERIAL     MARA     LAENG
    6. I have done the distribution model settings (BD64) and  the idoc configurations
    1.     Logical System
    2.     RFC destination
    3.     Create port
    4.     Create partner profile
    7. I changed the fields in material master data(Tcode MM02)  and I executed the Tcode BD21.
    Idoc is generated but the fields are not getting fill with the values
    (Note: some fields  are filled with values e. g material number, material description)
    I checked the Idoc data segment E1MARAM (WE02)
    Fld name   Fld cont.
    LAENG       /
    BREIT       /
    HOEHE      /
    Can you please let me know the issue
    Prad

    Issue is solved when I select the segments and the fields in the segments (Tcode :BD53)
    Prad

  • HT1689 I need to get my iPod to no longer be associated with the original i store account. My husband set it up through his account but now I have my own account. I don't want to go through his every time I want to make a change. how do I make this change

    I need to get my iPod to no longer be associated with the original i store account. My husband set it up through his account but now I have my own account. I don't want to go through his every time I want to make a change. how do I make this change?

    I am trying to stop using my I-pod under my husband's I-Tune account.  It was set up under his account and the only way I can use it under my account is to erase all of the songs my husband loaded on for me.  I had heard there is a duration that I-Pods are locked into to one account only, and I am trying to discover how I can use my account without having to erase everything on the I-Pod.  I know it sounds confusing but that's the way I-tunes have set it up.  thanks for asking.

  • I added an iTunes card to my account. THe balance shows on the account, but I can not download, because iTunes has an issue with the debit card linked to the account. Shouldn't it default to the balance from the card I added?

    iTunes keeps telling me my debit card is declined, when I am trying to use an iTunes card that I added today. The amount from the iTunes card shows on the account.

    You need to fix the issue with the credit card on the iTunes account or you can remove the credit card.

  • Regarding the Cheque printing in SAP Script. Issue with Layout Change.

    I have to modify the layout of a predeveloped script.
    The issue with the existing one is that, the Labels (on the window, that is printed) and the data (corresponding to it) are not on the same line.
    To be more clear, I have like this on the cheque,
    Payee : _______________________
    Amount : ____________________
    The Data corresponding to the Pay & Amount is not in the respective line (as I shown above).
    How can I get that both on the same line.?
    Shall I need to modify the layout or what else to do ?
    Pls. guide me.
    Your guidance is appreciable.
    Edited by: ravikanth seal on Mar 9, 2011 5:09 AM
    Edited by: ravikanth seal on Mar 9, 2011 5:10 AM

    Hi niraj gadre ..
    Ur idea may not workout fir me.
    My idea is :
    Can I use any formating options in the corresponding window's text elements..
    Pressing F9 on the windiw (in the Windows list) displays the Text Elements (Goto Edit-> Text Elemets on the Window chosen) in the Windows list.
    Here can we do any formating options, so as to change the layout alignment of window's Text Elements ??
    Guide me please.
    Your guidance is Appreciable
    Thanks.
    Edited by: ravikanth seal on Mar 9, 2011 7:55 AM

  • CD-ROM drive letter changed to the next available letter after an issue with the Storage appliance.

    Server platform:Windows server 2008 R2 Enterprise.
    Last time we experienced an issue with the storage device we are using to  attach a disk to our server 2008 (virtual). This storage device is also providing storage to the ESX where the server 2008 is hosted.
    The drive configuration in the server was:
    System C:\
    Tools D:\
    Apps E:\
    CD-ROM F:\
    Some hours after the storage appliance issue, we realized the Application on the server was not working and then we restarted the server. After restarting the server we went to the file explorer and realized that the Apps volume had the drive letter F and
    the CD-ROM had the E letter assigned.
    I assume windows lost the Apps disk due to the SAN disconnection. Maybe the CD-ROM was also disconnected and when the Storage appliance was connected again the CD-ROM acquire the next drive letter it found, which was the letter E:. Then the Apps disk was
    also discovered by Windows and it assigned the next available letter, F:.
    I was looking for some MS knowledge base to see how Windows 2008 server assigns the letter to the CD-ROM and how we can permanently fix the letter assigned to the disks and the CD-ROM so that this issue won't happen again. As you know many applications use
    the path including the drive letter.
    I thought that when you set a CD-ROM drive letter, it remains forever as is, and that in case of a SAN disconnection Windows assigns the same letter the drive had before the disconnection.
    Please advice if you have some documentation about this. And let me know if you have any thoughts about what really happened to prevent this in the future.
    Thank you guys!! 

    Hi, for the APP's drive it could had been assigned a new letter if the system did seen it as a new disk/partition.
    The partition was on your esx's LUN on the SAN ? (not an iSCSI connection from inside a VM?)
    Regards, Philippe
    Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
    Answer an interesting question ? Create a
    wiki article about it!

  • IMac isn't loading a specific website (can't connect to that server), regardless of browser, though the same website will load on other computers on same network. Is it an issue with the iMac's settings?

    Our iMac isn't loading a specific website (we get a message saying it can't connect to that specific server), regardless of browser (I've tried it in Chrome, Safari, and Firefox). However, the same website, which is for a major medical provider, loads without any issue on our other computers on the same wireless network. Is it an issue with the iMac's settings? All other websites seem to be loading without issue on the iMac.

    ... Is it an issue with the iMac's settings?
    Possibly. Make sure you are not using a proxy server. Look in Safari Preferences > Advanced > Proxies > "Change Settings..." This will take you to the applicable Network Preferences. Make sure that nothing is selected in the "select a protocol to configure" list. It should look like this:
    Still not working?
    Locate your Terminal app. It is in your Utilities folder. Open Terminal.
    In Terminal, copy (triple-click) and paste the following line:
    osascript -e 'tell application "System Events" to get name of every login item'
    This will produce a list of all your account login items.
    While you are in Terminal, copy (triple-click) and paste the following line:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
    This will produce a list of all non-Apple kernel extensions. There will be few, if any.
    Post the results of the above.

  • How do you fix the issues with the OS X mountain lion? Screen freezes pages just swipe on own

    Having issues with the lion operating system

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Issue with the App Store showing up blank.

    Issue with the App Store, it will not let me search for new apps.  The screen is blank.  The update section and features section works, but it will not let me search for new apps. I have restarted my phone and no changes. The newest update to the iphones when the iphone 5 came out, i think, messed up this app.  When i am looking at how to fix it, it tells me to delete it and try again, but the App store is not a deletable app.  Any ideas why my App store, specifically the search section of this app doesn't work?

    I suspect it is on Apple's side of things. Mine was blank too, but now it works again. Fixed itself one morning.
    https://discussions.apple.com/message/19659161#19659161

  • Issue with the presence indicator in list/library web part.

    When viewing a user field (Created By, Modified By or a custom People column) through the list web part (either through the default page /Forms/AllItems.aspx or a custom web part page using a list/library) the presence indicator always says presence unknown.
     However if I go to the Site Permissions on the same site, or My Site or a custom page using a modified core search results web part I wrote the presence indicator works fine.  I can't find any errors being reported on the server.  
    Looking at the rendered code the list web part generates:
    <IMG name=imnmark width=12 height=12 title="" class=ms-imnImg id=imn_48683,type=smtp alt="No presence information" src="/_layouts/images/blank.gif" border=0 sip="[email protected]">
    Locations where the presence indicator works the code is:
    <IMG name=imnmark width=12 height=12 title="" class=ms-imnImg id=imn{20140822-1752-098D-8C11-188AD0B8B8B6},type=sip alt=Available src="http://portal.mydomain.com/_layouts/images/imnon.png" border=0 sip="[email protected]" valign="middle">
    It appears that the List web part is not detecting that the users have a sip address and they appear to be rendered using smtp instead.  It's also odd that the list web part is pulling the correct sip address while the one that works is pulling the
    email address, not the sip address stored in the user profile.  I spent considerable time going through the xslt to try and figure how the tag is rendered but I haven't been able to figure it out.
    We are using Cisco Jabber 9.2.3 for IM, I don't know if that should make a difference or not. It's working fine in other parts of SharePoint and in Outlook. Running SharePoint Dec 2011 CU (14.0.6114.5000) with MS Office 2010 SP2 installed on the client. Tested
    in IE 9.0/10/11.
    Any ideas?

    We don't have a Lync server and I don't have the software available.  Are you saying just having Lync installed even though it won't work might help?
    I did some more digging and believe that this is an issue with the XsltListViewWebPart.  If I go to the UserInformationList the web part used to render the list is the ListViewWebPart and the presence indicator works there.  Also our environment
    was migrated from 2007 and there are a number of pages that are using the old ListViewWebPart and the presence indicator works fine in this part.  If edit the page and add the same list library to it, it's added as a XsltListViewWebPart and the presence
    indicator does not work.
    The presence control is not rendered by the xsl files used by the webpart.  I modified the xsl to display the raw xml and the html code for the presence is part of the xml.  I'm guessing this can't be changed and is part of how SharePoint is rendering
    the data for the XsltListViewWebPart.  You can see the Editor and CheckoutUser lines have the html code embedded in the data.
    <Row
    ID="60"
    PermMask="0x7fffffffffffffff"
    HTML_x0020_File_x0020_Type=""
    File_x0020_Type="xlsx"
    HTML_x0020_File_x0020_Type.File_x0020_Type.mapall="icxlsx.png|Microsoft Excel|SharePoint.OpenDocuments"
    HTML_x0020_File_x0020_Type.File_x0020_Type.mapcon="SharePoint.OpenDocuments"
    HTML_x0020_File_x0020_Type.File_x0020_Type.mapico="icxlsx.png"
    serverurl.progid="1http://myparkersdev.domain.com/sites/BPIT/_layouts/xlviewer.aspx?id=/sites/BPIT/Shared%20Documents/Database%20Sizes.xlsx"
    ile_x0020_Type.progid="SharePoint.OpenDocuments.3"
    File_x0020_Type.url="FALSE"
    FSObjType="0"
    FileRef="/sites/BPIT/Shared Documents/Database Sizes.xlsx"
    FileRef.urlencode="%2Fsites%2FBPIT%2FShared%20Documents%2FDatabase%20Sizes%2Exlsx"
    FileRef.urlencodeasurl="/sites/BPIT/Shared%20Documents/Database%20Sizes.xlsx"
    FileLeafRef="Database Sizes.xlsx"
    FileLeafRef.Name="Database Sizes"
    FileLeafRef.Suffix="xlsx"
    CheckoutUser="&lt;span class=&quot;ms-imnSpan&quot;&gt;&lt;a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'&gt;&lt;img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_77,type=smtp'/&gt;&lt;/a&gt;&lt;a onclick=&quot;GoToLink(this);return false;&quot; href=&quot;/sites/BPIT/_layouts/userdisp.aspx?ID=526&quot;&gt;Ian Howe&lt;/a&gt;&lt;/span&gt;"
    CheckoutUser.id="526"
    CheckoutUser.title="Ian Howe"
    CheckoutUser.span="&lt;nobr&gt;&lt;span&gt;&lt;a onclick=&quot;GoToLink(this);return false;&quot; href=&quot;/sites/BPIT/_layouts/userdisp.aspx?ID=526&quot;&gt;Ian Howe&lt;/a&gt;&lt;img border=&quot;0&quot; height=&quot;1&quot; width=&quot;3&quot; src=&quot;/_layouts/images/blank.gif&quot;/&gt;&lt;a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'&gt;&lt;img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_78,type=smtp'/&gt;&lt;/a&gt;&lt;/span&gt;&lt;/nobr&gt;"
    CheckedOutUserId="526"
    IsCheckedoutToLocal="0"
    Created_x0020_Date="0;#2014-08-22 09:47:01"
    Created_x0020_Date.ifnew=""
    ContentTypeId="0x0101000AE0EC76CD0DB743B42D2FE022EAA6DC"
    Modified="8/22/2014 10:51 AM"
    Editor="&lt;span class=&quot;ms-imnSpan&quot;&gt;&lt;a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'&gt;&lt;img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_79,type=smtp'/&gt;&lt;/a&gt;&lt;a onclick=&quot;GoToLink(this);return false;&quot; href=&quot;/sites/BPIT/_layouts/userdisp.aspx?ID=526&quot;&gt;Ian Howe&lt;/a&gt;&lt;/span&gt;"
    Editor.id="526"
    Editor.title="Ian Howe"
    Editor.span="&lt;nobr&gt;&lt;span&gt;&lt;a onclick=&quot;GoToLink(this);return false;&quot; href=&quot;/sites/BPIT/_layouts/userdisp.aspx?ID=526&quot;&gt;Ian Howe&lt;/a&gt;&lt;img border=&quot;0&quot; height=&quot;1&quot; width=&quot;3&quot; src=&quot;/_layouts/images/blank.gif&quot;/&gt;&lt;a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'&gt;&lt;img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_80,type=smtp'/&gt;&lt;/a&gt;&lt;/span&gt;&lt;/nobr&gt;"
    ecb.dispex="return DispEx(this,event,'TRUE','FALSE','FALSE','SharePoint.OpenDocuments.3','0','SharePoint.OpenDocuments','','1http://myparkersdev.domain.com/sites/BPIT/_layouts/xlviewer.aspx?id=/sites/BPIT/Shared%20Documents/Database%20Sizes.xlsx','526','526','1','0','0x7fffffffffffffff','','')" />
    I just find it strange that the old ListViewWebPart works.  Our SP environment has not been patched to the latest version, I'll try that next and see if it makes a difference.

  • Issue with PO change output - Service line items

    Hi All,
    This is issue with PO change output. We have PO with line item 10, 20 and item 10 has 4 service line items. PO is approved and initial print out is taken.
    Some one goes and makes changes to 1st service line items of PO line item 10.
    A change output gets triggered. When this output is printed, it prints line item 10 details. This is standard functionality as this item is changed. But its printing all the service line items for this PO line item. Consider a case where there are 3000 service lines for a PO item. If I add 1 service item to this PO line item, the change form prints 3001 services for that line item. There were no changes done to first 3000 service line items.
    Currently PO change form takes care of changes at PO line item but it does not take care of changes at service line item level.
    Is there any setting that needs to be done for this so that it only considers the changes at Service line item level also.
    Regards,
    Shahu

    If you're using a standard form, send a message to SAP. Otherwise make a change in the form.

  • I have an issue with the address browser in mail in Yosemite

    I am using IOS 10.10.1 now on an iMac and have discovered an issue with the address browser in mail.
    Previously in my pending to send email toolbar there was a contacts icon which I clicked  on to display my contacts list. I could hold down the Command button and select as many contacts I wanted (often up to 100), then select the field to send (to, ccc, bcc) and the contact would appear.
    Now, I have to click the + sign at the end of the field line, and select recipients one at a time. Not only that, but I have to click twice to get to the email address, once on the name and then the email address drops down under the name and then I click on the email address. When I do that the drop down box disappears and the recipient's email address goes to the field. I have tried all combinations of buttons to be able to choose multiple addresses but haven't found the right one yet.
    An Apple Support guy told me to open my regular Address book, and hold down the command button to choose multiple recipients then drag them to the field on my already opened send email.
    This is one way around the issue (which wasn't an issue in Mavericks) but where some recipients have two or more email addresses listed in my contacts it means I have to manually go through the finished list on my emails to make sure the most desired one was selected. What a pain.
    Also, previously, where I was sending out many emails and wanted to stop say half way down my list, and send, I could come back to that list for the next email and see where I'd got up to.
    I don't want to make groups because my recipients vary depending on what I am sending so my lists change constantly.
    Any suggestions?
    Last point...who archives? On my regular email page I now have the Archive icon to the left of my Delete icon which I would prefer was to the left, first in the line as this is the icon I use mostly. With Folders, my Sent and Trash lists, who needs to archive?
    Cheers,

    Last point...who archives? On my regular email page I now have the Archive icon to the left of my Delete icon which I would prefer was to the left, first in the line as this is the icon I use mostly. With Folders, my Sent and Trash lists, who needs to archive?
    I can help you only with the placement of the icon placement -- if you right-mouse click on the toolbar, then select Customize Toolbar, you can move an icon to where you want it to be.

  • How to deal with the change in address of plant,

    how to deal with the change in address of plant,companycode,sales org etc.?

    Hi,
    Do you want to change the address of Company code, Plant and Sales org?
    Follow the menu path in SPRO.
    SPRO >> Enterprise structure >> Definition >> Financial accounting >> Define Company code >> Edit company code >> Click on address and change.
    .. Definition >> Sales and Distribution >>  Define ...sales org >> select the sales org and click on address and change.
    ... Definition >> Logistics - general >> Plant >>>> Click on address and change.
    Regards,
    K Bharathi

  • Premiere Elements 13 issue with the mouse on When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip rom the mouse.    The clip follows my mouse movements and goes to other places in my

    Premiere Elements 13 issue with the mouse on MAC OSX Yosemite 10.10.1
    When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip from the mouse.
    The clip follows my mouse movements and goes to other places in my time line.
    I try to delete these extra insertions, but the mouse will not release the clip.
    Action I’ve taken: I’ve re-installed Premiere Elements 13. Problem remains.
    This issue has consumed too much of my time and does not go away.  It ruins my video.
    Help please.
    Thanks

    I tried using the Guest Account on my Mac. In the Guest Account, Illustrator works perfect!
    Then I started wondering what processes (tools/tweaks) I run by default on my account. Turned out the problem was called by a little background tool called RightZoom. RightZoom let's the green 'zoom' button always maximize your current window.
    So thanks! Problem solved!

  • Re : Issue with the column display in Bex reports

    Hello Gurus,
    I have an issue with the reports in Bex, this is a bit confusing scenario I would try to explain in more details. A query was already built for monthly Report in Sales and Billing for which the variable were  Calender month/year range 1 (mandatory), range 2 range 3 range 4. These 4 variable were created and moved to column rows in query.
    Later the user wanted the copy of same report but he wanted the variables to be Calender date range 1 (mandatory), range 2, range 3 , range 4. I have created them with 0calenderday as reference and moved to the columns.
    for the monthly report text variables were already existing for the Calender month/ year, but for the daily report text variable were not existing for Dates. I have created a text variable for the date in the following way processing by
    " replacement path" and reference characteristic as 0calday and in the replacement path tab.. in replace variable the selection is info object, the next option Replace with " External charactersitic value key " .
    By creating this text variable the dates were being displayed in the colum header like 11/01/2013 - 11/30/2013 which satisfies the requirement.
    But the user wanted to see the report same like monthly report when the mandatory variable Calender year/ month is selected, the rest of the columns range 2, range 3, range 4 are displayed as unassigned in the report. but coming back to the daily report when the user is giving the Calender date rage 1, he is finding that Calender date range 2, range 3, range 4  are also being displayed with values. He want to see the Calender date range 2,3,4 as unassigned in the report just like monthly. Please find the images attached.
    As Calender month/ year is predefined, if the calender range values are not given it would show up as not assigned default. I have created a separate text variable for Calender day, I believe that could be the reason rest of the columns are not showing up as unassigned. The user want to see them as unassigned like monthly report columns.
    I tried different ways changing the text variables but I could not change the display of the columns in Calender date report by the option - replace with ----> External characteristic value key, key, label. when I chose the option external characteristic value then the date was showing up in the text of the column when report is run ( Please find the image for the reference in the attachment ). . I request you to help me out in this. Please find the images of the variables and output below.

    Anshu,
    Thank you very much for above code I  made minor changes to the code that finally worked. I created 4 different text variables needed for Calender date range 1, 2 ,3 ,4. Please find the code below for the text variable that worked in the system
    WHEN 'ZTEXT_CAL1'.
       READ TABLE I_T_VAR_RANGE INTO loc_var_range
       WITH KEY VNAM = 'ZCALDATE1'.
        IF loc_var_range-LOW = '#'.
          dt_low = 'Not Assigned'.
          dt_high = 'Not Assigned'.
          CONCATENATE dt_low '-' dt_high INTO l_s_range-low.
        ELSE.
          CONCATENATE loc_var_range-low+4(2) '/' loc_var_range-low+6(2) '/' loc_var_range-low+0(4) into dt_low.
          CONCATENATE loc_var_range-high+4(2) '/' loc_var_range-high+6(2) '/' loc_var_range-high+0(4) into dt_high.
          CONCATENATE dt_low '-' dt_high INTO l_s_range-low.
        ENDIF.
            L_S_RANGE-SIGN = 'I'.
            L_S_RANGE-OPT = 'EQ'.
            APPEND L_S_RANGE TO E_T_RANGE.

Maybe you are looking for

  • "Unable to Open" PDF attachment using BlackBerry PlayBook when message is received from Exchange 03

    Hello, Recently I have found that some users are having an issue with opening PDF attachments on the BlackBerry PlayBook using their Exchange 2003 accounts. I have isolated the issued to only users on Exchange 2003 using activesync. To resolve/workar

  • CS3 : Create hidden color

    Hello, Is there any way to create a color with a script that does not goes to the swatch palette? In Indesign it is possible to create directly a color and put it to a item, i would like to create a color that is hidden for the user without myDoc.col

  • Embed meta data in QTfiles !

    If I have a QTfile with metadata already included in the file will FCSvr read it and store it. If not what can I do to have it do that. This would be a time saver if I didn't have to re write all those things 3 times everytime.

  • IRQ from FPGA delay

    Hi. I have encoutered a problem in my code: I am using a cRIO 9012 with FPGA utilize a NI 9871 4-port RS-485 module. My code is using FPGA code and low-level communication VI's from this example: http://zone.ni.com/devzone/cda/epd/p/id/6166  In my ap

  • [Solved] Syslinux + GPT on SSD

    Hello all, I've been trying to install arch for the past 3 days without success. I have a thinkpad x230 with an M4 SSD on which I want to install the configuration stated in the title. I've managed to install Windows and LMDE on this disk in less tha