Issue with the configuration of http xml port for sending the idoc

Hello,
I am planning to send multiple idocs in a single file using http xml port.
Presently I am trying to send a single idoc, but am having the issue.
I am trying to create a RFC for HTTP XML port of type H i.e. HTTP Connection to ABAP System
In the how to guide for - How Tou2026 Send Multiple IDocs Within One XI Message
( https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30ea2fdf-f047-2a10-d3a2-955a634bde6b )
the following parameters are defined for the path prefix -
RFC destination of type H (HTTP Connection to R/3 System).
Specify the path prefix as follows:
/sap/xi/adapter_plain/
?namespace=< your namespace>
&interface=<IDoc_Type>
&service=<Sender System>
&qos=EO (or EOIO).
I am trying to use the following prefix -
/sap/xi/adapter_plain/
?namespace=urn:sap-com:document:sap:idoc:messages ( this is the standard namespace of SAP for all the idocs)
&interface=DEBMAS05 (Idoc type )
&service=SNDLS100 ( ECC system name )
&qos=EOIO
On testing the RFC connection, I am getting the error of page not found.
Can anyone please give me pointers for the issue.
Regards,
Mayank

Thanks Barry!!!
Now I am getting a different message.
In RFC...it is giving me the following message ->
Status HTTP Response 204
Status Text Body is empty
In case of Idoc, the status is till 02...
the error description for the idoc is --
"When transferring the IDoc by HTTP, the return code with the message '500<SAP:Error><SAP:Category>XIServer</SAP:Category><S' has occurred.
The target address was: http://emgeccsnd1:8001/sap/xi/adapter_plain/?namespace=urn:sap-com:document:sap:idoc:messages&interf
Check whether the IDoc can be sent again.
It is unfortunately not possible to determine automatically whether the IDoc has in fact arrived in the target system and the error occurred afterwards"
I am still not able to resolve the issue.
Regards,
Mayank

Similar Messages

HT4623 My computer is not taking the new update from itunes. It states that i do not have the requirements to finish the Install and that it was Installed incorrectly. I have never had any issue with any previous update regarding iTunes. What is the issue

My computer is not taking the new update from itunes. It states that i do not have the requirements to finish the Install and that it was Installed incorrectly. I have never had any issue with any previous update regarding iTunes. What is the issue?

Hi there Double2D,
You may find the troubleshooting steps in the article below helpful.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
-Griff W.

I need to get the logs of my iPhone 5. I'm a registered as a developer and I have an issue with one of my app which is already in the market

I need to get the logs of my iPhone 5. I'm a registered as a developer and I have an issue with one of my app which is already in the market

The Firefox 3.5.x branch has reached end-of-life and is no longer maintained.<br />
You will no longer receive security updates.<br />
You can update Firefox via "Help > Check for Updates" or download and install the latest Firefox 3.6.x.<br />
Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/4.0/system-requirements/
If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

TS1398 After the recent update of iOS 7.0.6 my phone is having issues with wifi connectivity. It gets disconnected most of the time. It is very toublesome while watching videos, sending pics, chatting and so on. Please advise. Thank you.

After the recent update of iOS 7.0.6 my phone is having issues with wifi connectivity. It gets disconnected most of the time. I went through support page and done with "Reset Network settings" too but it doesn't help. It is very toublesome while watching videos, sending pics, chatting and so on. Please advise.
It works fine in LTE network. The problem is with WIFI only.
Thank you.

Hey Siddh.s!
Here is an article that will help you troubleshoot this issue with your Wi-Fi connections:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for using the Apple Support Communities. Have a good one!
-Braden

I just got my new iphone. I successfully signed in my apple account by i have an issue with my icloud. It took my email but the password is incorrect. is the apple account email just the same with the icloud email?

I just got my new iphone. I successfully signed in my apple account by i have an issue with my icloud. It took my email but the password is incorrect. is the apple account email just the same with the icloud email?

ckuan is right.
also you can check you Apple ID in this website, https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

I've been having an issue with assistive touch, every time I open an app. the AT disappears the from the screen and I have to turn it off and ON again. Is there a way to fix this?

I've been having an issue with assistive touch, every time I open an app. the AT disappears the from the screen and I have to turn it off and ON again. Is there a way to fix this?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Can I update or fix the hardware issue with my iPad instead of a usb for my 2007 MacBook Pro

Can I update or fix the hardware issue with my iPad instead of a usb for my 2007 MacBook Pro

Have no idea what you are asking about. What hardware issue? What does a USB and a 2007 MacBook Pro have to do with it?
GB

I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case som

I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case someone left me a message. How do I resolve this issue?

Wifi: my Cell phone will remember 10 wifi connections. So delete any you don't use often and your home wifi and try to enter home wifi again.
if it still won't connect to home wifi, call your internet provider for help. You may need a newer router or different settings Or upgraded service. Your phone seeks the best connection and will refuse lesser connections.
last resort. Backup the phone. Do a full reset, then restore as new with the backup.
if still not fixed, go back to apple and insist on repair or replacement.
HOWEVER. voicemail is not a wifi issue, it's a carrier function, which is why the SIM card is a suspect.

Having trouble with my Airport Utility not supporting either of my Airports Expresses or Basestation. Do i have to update Firmware of airports or is the issue with my version of Utility which i believe is the latest. Thank you.

having trouble with my Airport Utility not supporting either of my Airports Expresses or Basestation. Do i have to update Firmware of airports or is the issue with my version of Utility which i believe is the latest. Thank you.

AirPort Utility in Mountain Lion will not support the older versions of the AirPort Express.....model numbers A1084 and A1088. Check on the side of the Express for the model number.
In addition, AirPort Utility in Mountain Lion will not support the older "round" or "dome" shaped versions of the AirPort Extreme.
Can you check to see how your devices might be affected?

Start with the Option key down - Which port to connect the keyboard?

When I need to start my Mac with the Option key down in order to select a boot volume, I have noticed that the system ignores the Option key press and boots into a previous boot volume if a USB keyboard is plugged into an external USB hub. That's understandable because the boot sequence may not detect the keyboard on the external USB bus fast enough for the system to recognize the Option key press.
My Mac will always recognize the Option key press at a boot time if the USB keyboard is plugged into a USB port on the Mac.
I want to know what if the boot sequence will detect the keyboard +soon enough+ to recognize the Option key press if the keyboard is connected to a USB port on a PCIe USB expansion card.
If you know the answer, please let me know because, if the answer is no, I would not want to invest money into an expansion card.

Even if it doesn't work with the card, you can plug the keyboard into a built-in port and use the card's ports for other USB devices. The total number of USB ports would be the same.

List of ports for all the WCI services

I'm trying to figure out why collab cant talk to the CNS, and I see in the log:
"Attempting to connect to teh notification server at host=blah (udp heartbeat port=28282 ..."
aarg. where is the configuraiton for this? can't find it anywhere.
Has anyone created a complete list of source - destination ports for all the new components?
I"m going to start writing them down here:
http://wiki.oracle.com/page/Webcenter+Interaction+Deployment

Hi Joel,
I have had a similar problem before but I am not sure if it is related to this, if you take a look inside the PTHOME/settings/configuration.xml file you will find some extra parameters which are not listed in the configuration manager for collab.
I suggest trying some of these settings to see if they coincide with your issue. The problem I had before was when a port that was not even listed in the config manager was blocked by my firewall.

Firefox does not open, but instead gives the error message, "Failed to read the configuration file." It has worked in the past, but not now.

Firefox does not open, but instead gives the error message, "Failed to read the configuration file." It has worked in the past, but not now.
I REINSTALL 10 TIMES SO DON'T TELL ME THAT!!!
I'm piss because i need firefox working again so i can finish reseaching my speech in 5 days.

Which files do you have in the defaults\pref folder in the Firefox program folder?
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
See also "Other solutions":
*http://kb.mozillazine.org/Preferences_not_saved
Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 22.0: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!

have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!
The configure bar gets about an 1/8 full and then just does nothing. I think its lists the update as combo update? cant remember with out checking.
I have tried to do the disk verify and repair but this has made no difference.
Please let me know what i need to do, I have reformatted the mac just to start over as was clogged with a lot of useless data, I had installed lion (10.7) from the app store previously and now cant seem to find a way to re install lion. I hope I dont need to pay for it again?

If you erased your hard drive, you'll need to reinstll OS X 10.6 Snow Leopard to access the App store. You won't have to pay for OS X 10.7 Lion again. Did you try booting to the recovery partition by holding the command and r keys down? If that's still there, you can reinstall OS X 10.7 from there.
If you're looking to install the current iTunes, you need OS X 10.6.8 at a minimum.
If you're still trying to update OS X 10.5 Leopard, you can download the combo update from here. Download, use Disk Utility to repair permissions, apply the update, then repair permissions again. That will take you to OS X 10.5.8.

Compatibilityy issue with windows XP and windows 8.1 for adobe photoshop elements 4.0

Compatibility issue with windows XP and windows 8.1 for adobe photoshop elements 4.0?comcom

You are going to have to contact Adobe on this one. We are other users.
Sounds like it's not even an Apple question? Not sure.
But the Adobe program changed, nothing changed in iTunes, right?

Problem on the configuration about creating an SPN for your CMS on a Window

I have some problem on the configuration about creating an SPN for your CMS on a Windows 2003 domain
My Environment:
Domain Controller and AD Server :SV01
Crystal Report Server: SV07
Domain Name: SVG.NTT.LOCAL
I created a domain user "BOUSER" in SV01
When type the following command in the SV01, it have not any response.
"SETSPN.exe u2013A BOBJCentralMS/SV07.SVG.NTT.LOCAL BOUSER"
And i cannot find the "Delagation" tab in the domain user property window.
Have any wrong in the command ?

Hi Tim,
Thank you for your reply.
We used Tomcat and MySQL database.
I have only integrating with AD and requiring manual logon.
I had created a bscLogin.conf file and krb5.ini file
krb5.ini file:
[libdefaults]
    default_realm = DNS.COM
    dns_lookup_kdc = true
    dns_lookup_realm = true
[realms]
DNS.COM = {
    kdc = SV01.SVG.NTT.LOCAL
    default_domain = SVG.NTT.LOCAL
bscLogin.conf file
com.businessobjects.security.jgss.initiate {
com.sun.security.auth.module.Krb5LoginModule required;
And insert the following two lines in Tomcat's Java Tab
-Djava.security.auth.login.config=C:\WINDOWS\bscLogin.conf
-Djava.security.krb5.conf=C:\WINDOWS\krb5.ini
I also set Serivice Principal Name "bouser FQDN" in Crystal Report Server.
We can login in Central Management Console with our domain user.
But When we logon in InfoView with our domain user account.
It display the following error:
"Account Information Not Recognized: Active Directory Authentication failed to log you on. Please contact your system administrator to make sure you are a member of a valid mapped group and try again."
Any step i missed ?

Issue with the configuration of http xml port for sending the idoc

Similar Messages

Maybe you are looking for