Issue with the process chain?

Hi All,
I have a process chain triggerred by an event.I had this transported into Q box.After moving it to Q i did click on acativate and schedule icon.When i triggered the event in Sm64.The process chain triggerred successfully.The next day when i tried to trigger the event ,the process did nothing,its only after i actiavted the process chain and triggrred the event the process.
I know the process chain should be good after ictivated once when moved into a new system.Can anybody tell me how to resolve my issue of activating the PC whenever i wnat to trigger it.What i am i missing here?
Please advice,urgent

I think Geo answered what you want and what I wanted to tell.
Thanks Geo
Ther are two basic things
--> In order that your PC responds to your "Event & Parameter", maintain the same and PC should be in scheduled status
--> the periodic check box schedules again once the current run completes. i.e makes ready the PC for the next run whenever the next "event and parameter" gets triggered by any means ( you no need to activate and schedule again)
Sorry If my answer confused you..Hope everything is clear now...!
VJ

Similar Messages

Statistics technical content activation issue with MD process chain in BI7

Hi,
Let me give you history of the issue first.
I had to activate the Statistics in BI7. I followed the SAP Note 965386 and activated the Technical Content.
Faced activation issues in MD process chain, Content Master Data-0TCT_MD_C_FULL_P01. It dint get activated, Followed the SAP note 1065919, which asked me to remove the below process from RSPC and activate it.
Load data- Process Variant Attribute and
Load data- Process Variant Text.
I did the same and it got activated after removing them.
Issue is. Later knew that manually activating the Process chain from Content would have activated those Infopackages aswell.
Now how should I get those processes into the chain and activate? Based on your suggestions, I can let you know what all I have been trying to fix it?
Relying on you for solution.
Thanks
Pavan

Thank You Neethika,
I have this issue solved. I replicated the data sources, activated those infoPackages manually and then added those variants into the process chain manually. So my MD chain now has all the necessary process.
Now i need to schedule them and see if it runs with out any errors. I will keep this thread open till i run it to take your help if i get any errors while running them.
Thanks
Pavan

Problem with the Process chain

Hi,
I created a Process chain and moved to Q for testing. The transport was failed because some objects are locked in BQ system. I unlocked them and moved the TR again. Now the transport was successful but the changes to the process chain are not reflecting in the Q system. There are no errors in the transport log but we have some warning messages which can be ignored. What could be the reason?
Thanks

Yes, When I get into the change mode I can see the changes. Thanks a lot for your reponse.
Full Points awarded.
Thanks again.

PSA Deletion Issue from the Process Chain

Hi,
I am facing problem in PSA Deletion from the chain. Scenario and issue as follow:
Scenario:
I have a PSA deletion Chain which got trigger daily. Which contains the many "Deletion of Requests from PSA" step. Datasources in the steps are from 3 different source system. Previously all are working fine. I am using 7.1 version.
Issue:
1. All PSA Deletion step working fine except the BW source system Datasources.
2. Few of the Datasources from BW source system are working fine(i.e, deleting the requests as per the condition given in the step.) and few are not(i.e, it does not pick up any request for deletion, but it have to delete some requests as per the conditions.).
All the PSA deletion steps are turns to green when chain executed.Few of them is not working from august and few are from the october(i.e, Not any specific date)
Please suggest me the solution for above issue.
Thanks in Advance.
Himanshu.

Hi ,
Goto display/maintain variant of the PSA deletion step and compare conditions of the Infopackages which delete data successfully with those which do not .
The condition given for the info-package whose data is not deleted from PSA , is not being satisfied that might be the reason the request is not deleted from the infopackage.

Issue with the /CPMB/EXPORT_TD_TO_FILE transformation file.

Good evening to all,
We have to export data from a cube to a text file. To do this we have create in the BPC (NW 7.5 SP 09) a package with the process chain /CPMB/EXPORT_TD_TO_FILE but when we execute the package, we get an error. We think that the error is generated by the transformation file. In the chainu2019s log we can see that the process didnu2019t finish successful, the Appl Source and the clear BPC tables variants are in red and we get this error u201CJob or process BPCAPPS waiting for eventu201D.
Can anybody help us?
our transformation file is like this:
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=
*MAPPING
DIMENSION_1=/CPMB/NAMEDIMENSION_1
DIMENSION_2=/CPMB/NAMEDIMENSION_2
DIMENSION_3=/CPMB/NAMEDIMENSION_3
DIMENSION_4=/CPMB/NAMEDIMENSION_4
DIMENSION_5=/CPMB/NAMEDIMENSION_5
Amount=/CPMB/SDATA
*CONVERSION
Is this the proper use of the TF in this case?
The complete error log:
/CPMB/MODIFY completado en 0 segundos
/CPMB/APPL_TD_SOURCE completado en 2 segundos
/CPMB/CLEAR completado en 0 segundos
MEASURES=PERIODIC
TRANSFORMATION= DATAMANAGERTRANSFORMATIONFILESTF_EXTRACCION_PLANO.xls
FILE= DATAMANAGERDATAFILESprueba1.txt
ADDITIONINFO= Sí
(Selección de miembros)
CONCEPTO_FI:
FUENTE:
GRUPOCAME:
MONEDA:
SOCIEDAD:
TIEMPO: 2011.ENE
VERSION:
Nom.tarea TRANSACTION DATA SOURCE
Error de sentencia MDX: Valor CONTCORMOL /CPMB/T5DDIW
Aplicación: FINANZAS status de paquete: ERROR
Thanks in advance,
Best regards

Hi. Thanks for the reply.
We still working on the issue. For a test we run the package without TF but we get the same error. We can find out the variant BPC Appl Source(APPL_TD_SOURCE) is the variant that generates the issue.
When we ran the package the package didn't finish and it get the status get the status active but when we ran the package in an other application the package ends with an error.
The variant log error was:
RSPROCESS 4ENFI7BF1OI7M7E5GKHXIT5IL is unknown
Here is the log in english.
/CPMB/MODIFY complete in 0 seconds
/CPMB/APPL_TD_SOURCE complete en 5 seconds
/CPMB/CLEAR complete en 0 seconds
[Selection]
MEASURES=PERIODIC
TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\TF_EXTRACCION_PLANO2.xls
FILE= DATAMANAGER\DATAFILES\EXAMPLES\prueba_ETD.txt
ADDITIONINFO= Yes
(Members selection)
CONCEPTO_FI:
SOURCE:
GRUPOCAME:
CURRENCY:
SOCIETY:
TIME: 2011.JAN,2011.FEB,2011.MAR,2011.APR,2011.MAY,2011.JUN,2011.JUL,2011.AGO,2011.SEP,2011.OCT,2011.NOV,2011.DEC
VERSION:
[Messages]
Task name TRANSACTION DATA SOURCE
Sentence error MDX: Value CONTCORMOL /CPMB/T5DDIW
Application: FINANZAS Package status: ERROR
Thanks for your help, best regards.

Issue realted to the process chain.

dear sir,
i hope all are doing great, this is the message regarding the issue with process chain in sap-bw(from application server)
i'm trying to load data from flat file to ods and infocube parallely, i've created the infocube and ods object and i've also created the respective infopackages and copied the name of infopackages.
i've created the process chain and in monitoring i.e. rspcm when i'm adding the process chain the status in not green its a yellow triangle.
apart from that i'm getting an error message saying that- objects have been locked by the sapuser.
please do help me to get rid of this issue.
please do send me the related documents regarding the process chains, that would help me to understand the concept.
thank you.
regards,
ratin.

You will need to post this to a 'better' forum this is crystal reports.

I am having issues deactivating my version of CS4. I receive an error message stating unable to connect or that my firewall or proxy settings are interfering with the process. I do not want to uninstall until i can deactivate as i wish to use a copy on an

am having issues deactivating my version of CS4. I receive an error message stating unable to connect or that my firewall or proxy settings are interfering with the process. I do not want to uninstall until i can deactivate as i wish to use a copy on another laptop

Hi K8tym,
Please refer to below article.
http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Thanks

Need help with BW Process chain issue

Hi Gurus,
I had made a copy of the existing process chain so that I can work on the changes. Its a metachain and I tried to copy a sub chain.
But at a later point of time, I have realized that the process chain had got into a nested loop in the meta chain, for the sub chain, I had copied. How do I rectify it?
Kindly suggest

hi,
use the bottom up approach.
Looking at the attached file it has many PCs.
Just note down all list of all PC and then do the copy of individual PCs, later you can copy the complete meta chain.
If you want give one more chance and try to copy meta chain again.
Thank-You.
Regards,
VB

Error while executing the Process chain

Hi Friends,
The process chain that I scheduled is getting failed at the Infopackage loading stage.
On checking the diplay message, I found the following log:
Cannot stage requested data for datasource
Error in source system
I activated the datasource in source system, then replicated the same and tried to load data.
But the issue remains the same.
I checked in RSA7. The status corresponding to this datasource is in yellow status.
Can I delete this entry and try again?
Please suggest.
Thanks in advance.
Surjit P

Hi,
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Deadlock
http://help.sap.com/saphelp_nw04s/helpdata/en/2e/44934257a5c86ae10000000a155106/frameset.htm
Dead Locks
2. Error in unit conversion
Units of measure
3.Error 1 in update
When Src file is already open or not accessible.
4.Processing no data
theres no data selected after extraction
5.Caller 70 missing
" This error normally occurs whenever BW encounters error and is not able to classify them. There could be multiple reasons for the same
1) Whenever we are loading the Master Data for the first time, it creates SIDs. If system is unable to create SIDs for the records in the Data packet, we can get this error message.
2) If the Indexes of the cube are not deleted, then it may happen that the system may give the caller 70 error.
3)Whenever we are trying to load the Transactional data which has master data as one of the Characteristics and the value does not exist in Master Data table we get this error. System can have difficultly in creating SIDs for the Master Data and also load the transactional data.
4) If ODS activation is taking place and at the same time there is another ODS activation running parallel then in that case it may happen that the system may classify the error as caller 70. As there were no processes free for that ODS Activation.
5) It also occurs whenever there is a Read/Write occurring in the Active Data Table of ODS. For example if activation is happening for an ODS and at the same time the data loading is also taking place to the same ODS, then system may classify the error as caller 70.
6) It is a system error which can be seen under
the Status tab in the Job Over View.
solution:
" If the Master Data is getting loaded for the first time then in that case we can reduce the Data Package size and load the Info Package. Processing sometimes is based on the size of Data Package. Hence we can reduce the data package size and then reload the data again. We can also try to split the data load into different data loads
If the error occurs in the cube load then we can try to delete the indexes of the cube and then reload the data again.
If we are trying to load the Transactional and Master Data together and this error occurs then we can reduce the size of the Data Package and try reloading, as system may be finding it difficult to create SIDs and load data at the same time. Or we can load the Master Data first and then load Tranactional Data
If the error is happening while ODS activation cause of no processes free, or available for processing the ODS activation, then we can define processes in the T Code RSCUSTA2.
If error is occurring due to Read/Write in ODS then we need to make changes in the schedule time of the data loading.
Once we are sure that the data has not been extracted completely, we can then go ahead and delete the red request from the manage tab in the InfoProvider. Re-trigger the InfoPackage again.
Monitor the load for successful completion, and complete the further loads if any in the Process Chain.
6.Idoc not processed completely.
Here the request remains yellow (in process) and with the same details (as seen in the details tab of the monitor) for an abnormally long time. Many-a-times, the port for communication is not open and re-starting the load helps. For long running jobs, it may not be advisable to restart the extraction
Contact the BASIS administrator to push the IDOC.
look into these links:
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
For common data load errors check this link:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Majority of the issues will be based on these things only..
Hope the following links will give u a clear idea about process chains and clear ur doubts.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
Business Intelligence Old Forum (Read Only Archive)
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Siggi's weblogs for data load error and how to restart process chain
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Hope this helps.
pls award me some points
thanks.
Thanks

Error in delta run in the process chain

Hello Experts,
I have a delta infopackge that runs everyday , since many days the process chain is giving error at the IP.
The IP is red everyday and the following objects does not start, however when I check in the monitor the ip is completed successfully without any errors.
I checked the logs which is in greeen in the batch job , please find the details below.
Job started
Step 001 started (program RSPROCESS, variant &0000000111903, user ID ALEREMOTE)
Last delta upload not yet completed. Cancel
Data saved successfully
Start InfoPackage ZPAK_4EH1CYBST65PTYCQVFAQY6ZI7
Last delta upload not yet completed. Cancel
Last delta upload not yet completed. Cancel
InfoPackage ZPAK_4EH1CYBST65PTYCQVFAQY6ZI7 created request
Request REQU_4L001XOSR2IQQ14M90QLO1CTA could not be generated with InfoPackage REQU_4L001XOSR2IQQ14M90QLO1CTA without errors
Last delta upload not yet completed. Cancel
Error After Starting InfoPackage ZPAK_4EH1CYBST65PTYCQVFAQY6ZI7 in Process Chain ZIM_INT_ORDER
Entire chain now has status 'A'
Job finished
Could you please suggest.

Hello
Thanks for your reply
the problem was with the way it was schudled, the chian was ticket at periodic run , as a result it as running automatically, and causing problem.
I have removed the periodic n saved it again ...the error stopped appearing !
The issue is resolved now.
Thanks for your help.

Issues related to process chains

dear gurus,
i hope all are doing great, this is the message regarding the issue with process chain in sap-bw(from application server)
i'm trying to load data from flat file to ods and infocube parallely, i've created the infocube and ods object and i've also created the respective infopackages and copied the name of infopackages.
i've created the process chain and in monitoring i.e. rspcm when i'm adding the process chain the status in not green its a yellow triangle.
apart from that i'm getting an error message saying that- objects have been locked by the sapuser.
please do help me to get rid of this issue.
please do send me the related documents regarding the process chains, that would help me to understand the concept.
thank you.
regards,
ratin.

Hi,
Please refer the below doc:
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00a1f389-ec7c-2c10-04bc-9d81b3084171?quicklink=index&overridelayout=true]
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80ffbc22-8c91-2d10-ed84-e246b29e7be5?quicklink=index&overridelayout=true]
Thanks

Regarding "Delete Index" process in the process chain.

Hi Gurus
In the process chain, I have Delete Index -> Load Info pacakge -> Create Index process in the above order.
I am loading few records, so no need to delete indexes everytime. Can i remove the "Delete Index" process from the Chain without deleting the Create Index process. Or do I have to delete both.
Could you please clarify my doubt if possible in detail.
Thanks,
Regards,
aarthi

With the numbers you provided, you probably don't need to have the steps. With Oracle (not sure about all the other DB flavors) there are some other considerations:
Not having the indexes when loading the data can improve the load time since the bitmap indexes are not very efficient with respect to inserts/updates. The more dimensions you have, the more indexes there will be and the more noticable the impact of having the indexes present when loading.
The drop index process only drops the F fact table indexes. If you compress your cubes regularly so that you don't have many uncompressed requests, the index rebuild time will remain small, but if you have many uncompressed requests in your cube, the index rebuild time can begin to exceed whatever time you might save on the load with indexes deleted.
With bitmap indexes present, you can also occasionally receive a ORA-0600 deadlock error during the load process, and that can be prevented by dropping the indexes before loading or chose the load option packet by packet so that two packets are not trying to update the same index block at the same time.
Another concern in shops where reporting on the cube might occur during the load process - if you drop indexes prior to a load, any one trying to run a query on teh cube could have poor query performance since all the indexes will be missing onthe F fact table, this agina becomes more apparent the more data you have in the uncompressed fact table.
So it really comes down to your environment, but certainly drop the indexes any time you have large loads.

Event is not getting triggered in the process chain

Hi,
We had a process chain which was triggered by an Event, and it was running fine until few days ago. So I removed the chain from schedule and re-scheduled it again with these details:
File load: every 2 hrs
Process chain setting
Immediate tab: start immediately
After event: "event name" and "parameter name" and periodic job: ticked
I activated the chain and scheduled it. But the event is not triggered and the chain does not start. I even tried to trigger the process chain manually in sm64 but the process chain did not start.
Can someone please tell me steps to automate the event triggering and also any setting that should be taken care off in the info package and the process chain.
Thanks In advance.
Ram

Hello Ram, to start your Process Chain by an event, then you need to maintain the Start process of the process chain.
Select "Direct Scheduling".
In the Change Selections, press After Event. Put your event name and parameter (if any). Also click on Periodic job.
Press Save. Then Activate and Schedule your process chain. All your processes should turn green.
To verify, right-click on the Start process and select Displaying Scheduled Job(s).... You should see a job called BI_PROCESS_TRIGGER in a Released status. You can click on the job and look at the start conditions.
When you go to trigger the event, use the same event name and parameter (if any) as in the start condition. Your process chain will then execute. To insure, use RSPC to view your process chain and press the Logs icon (last one at the top).
Does this help?

Performance issues with the Vouchers index build in SES

Hi All,
We are currently performing an upgrade for: PS FSCM 9.1 to PS FSCM 9.2.
As a part of the upgrade, Client wants Oracle SES to be deployed for some modules including, Purchasing, Payables (Vouchers)
We are facing severe performance issues with the Vouchers index build. (Volume of data = approx. 8.5 million rows of data)
The index creation process runs for over 5 days.
Can you please share any information or issues that you may have faced on your project and how they were addressed?

Check the following logs for errors:
1. The message log from the process scheduler
2. search_server1-diagnostic.log in /search_server1/logs directory
If the build is getting stuck while crawling then we typically have to increase the Java Heap size for the Weblogic instance for SES>

The 0co_om_opa_6 ip in the process chains takes long time to run

Hi experts,
The 0co_om_opa_6 ip in the process chains takes long time to run around 5 hours in production
I have checked the note 382329,
-> where the indexes 1 and 4 are active
-> index 4 was not "Index does not exist in database system ORACLE"- i have assgined to " Indexes on all database systems and ran the delta load in development system, but guess there are not much data in dev it took 2-1/2 hrs to run as it was taking earlier. so didnt find much differnce in performance.
As per the note Note 549552 - CO line item extractors: performance, i have checked in the table BWOM_SETTINGS these are the settings that are there in the ECC system.
-> OLTPSOURCE - is blank
   PARAM_NAME - OBJSELSIZE
   PARAM_VALUE- is blank
-> OLTPSOURCE - is blank
   PARAM_NAME - NOTSSELECT
   PARAM_VALUE- is blank
-> OLTPSOURCE- 0CO_OM_OPA_6
   PARAM_NAME - NOBLOCKING
   PARAM_VALUE- is blank.
Could you please check if any other settings needs to be done .
Also for the IP there is selction criteris for FISCALYEAR/PERIOD from 2004-2099, also an inti is done for the same period as a result it becoming difficult for me to load for a single year.
Please suggest.

The problem was the index 4 was not active in the database level..it was recommended by the SAP team to activate it in se14..however while doing so we face few issues se14 is a very sensitive transaction should be handled carefully ... it should be activate not created.
The OBJSELSIZE in the table BWOM_SETTINGS has to be Marked 'X' to improve the quality as well as the indexe 4 should be activate at the abap level i.e in the table COEP -> INDEXES-> INDEX 4 -> Select the u201Cindex on all database systemu201D in place of u201CNo database indexu201D, once it is activated in the table abap level you can activate the same indexes in the database level.
Be very carefull while you execute it in se14 best is to use db02 to do the same , basis tend to make less mistake there.
Thanks Hope this helps ..

Issue with the process chain?

Similar Messages

Maybe you are looking for