Issue with the Proxy

Hi
I am having a problem generating proxies for an Asynchronous call. When the proxy is generated in the sandbox the method EXECUTE_ASYNCHRONOUS is created.
However a method is generated with the PI message interface name.
For example: if the message interface face name in PI is ZMI_MaterialClientProxy, the proxy is generated with a method name ZMI_MATERIAL_CLIENT_PROXY.
Please Help!
Thanks & Regards.

Hi ,
  Assume your message interface as'ZMI_MaterialClientProxy'
  if you generate proxy by consider prefix as 'ZPR' and packageas '$tmp'.
  then your proxy class generated with  ZPR_CO_ZMI_MaterialClientProxy"
   method generated with 'EXECUTE_ASYNCHRONOUS'.(for outbound)
    methos generated as ZPR_II_ZMI_MaterialClientProxy~EXECUTE_ASYNCHRONOUS (for inboud) 
warm regards
mahesh.

Similar Messages

  • IOS 5.1 or iPhone Configuration Profile 3.5 for Windows has not fixed the issue with apply Proxy Settings

    iOS 5.1 or iPhone Configuration Profile 3.5 for Windows has not fixed the issue with apply Proxy Settings via a Configuration Profile. Has anyone else got the same issue? Are Mac users got this issue?

    This seems to be working for me now but will keep monitoring it the next couple of times I use it to make sure its not a one time thing

  • Intermittent proxy error "There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server "

    Hi all,
    From time to time (at least once a day), the following message pops up on the user's screen:
    "There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server . Error Code 80000000)."
    If we click "OK" it goes away and everything continues to work although sometimes Outlook disconnects. It is quite annoying...
    Any ideas?
    Thank you in advance

    Hi,
    For the security alert issue, I'd like to recommend you check the name in the alert windows, and confirm if the name is in your certificate.
    Additionally, to narrow down the cause, when the Outlook client cannot connect again, I recommand you firstly check the connectivity by using Test E-mail AutoConfiguration. For more information, you can refe to the following article:
    http://social.technet.microsoft.com/Forums/en-US/54bc6b17-9b60-46a4-9dad-584836d15a02/troubleshooting-and-introduction-for-exchange-20072010-autodiscover-details-about-test-email?forum=exchangesvrgeneral
    Thanks,
    Angela Shi
    TechNet Community Support

  • There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site "Mailserver"

    Good day Guys
    First of all I am not an Exchange Expert, and I might be asking a very stupid question, but please bare with me. :) 
    While I was on leave our Mail server fell over and The company got a Specialist to help out for the time being.
    We where\are on Microsoft Exchange 2007 , which Fell over, and the specialist was able to recover as much data as he could.
    They then installed Exchange 2013 and tried to migrate everything from 2007 to 2013 and not everything migrated over.
    But the problem is, Outlook Anywhere was enable on 2007 and worked a 100% (before the disaster)
    With Exchange 2013 I get the following error message when trying to connect With Outlook 2013, using an external connection:
    "There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site "Mailserver"
    Outlook is unable to connect to the Proxy server. (Error Code 0)"
    Has anyone had the Similar when migrating over from 2007 to 2013 or is this an Issue on IIS and nothing to do with Exchange migration?
    Your assistance will be greatly appreciated.

    Hi,
    Firstly, I would suggest we use Exchange 2013 FE as the Outlook Anywhere proxy server.
    For the certificate issue, it mostly occurs because the host name that Outlook are trying to access does not match the certificate SAN. Please check with this point. If they do not match, you
    can change the host name by referring to the following article:
    https://support.microsoft.com/kb/940726/en-us?wa=wsignin1.0
    Thanks,
    Simon Wu
    TechNet Community Support

  • IMac isn't loading a specific website (can't connect to that server), regardless of browser, though the same website will load on other computers on same network. Is it an issue with the iMac's settings?

    Our iMac isn't loading a specific website (we get a message saying it can't connect to that specific server), regardless of browser (I've tried it in Chrome, Safari, and Firefox). However, the same website, which is for a major medical provider, loads without any issue on our other computers on the same wireless network. Is it an issue with the iMac's settings? All other websites seem to be loading without issue on the iMac.

    ... Is it an issue with the iMac's settings?
    Possibly. Make sure you are not using a proxy server. Look in Safari Preferences > Advanced > Proxies > "Change Settings..." This will take you to the applicable Network Preferences. Make sure that nothing is selected in the "select a protocol to configure" list. It should look like this:
    Still not working?
    Locate your Terminal app. It is in your Utilities folder. Open Terminal.
    In Terminal, copy (triple-click) and paste the following line:
    osascript -e 'tell application "System Events" to get name of every login item'
    This will produce a list of all your account login items.
    While you are in Terminal, copy (triple-click) and paste the following line:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
    This will produce a list of all non-Apple kernel extensions. There will be few, if any.
    Post the results of the above.

  • Hp Envy X2 issues with the touchpad gestures

    I am experiencing some issues with the touchpad gestures after every time it wakes up. I am already update the drives posted in the hp web site, is anybody out there with the same issues?

    I couldn't find any graphic drivers for that notebook, but here is an updated chipset that is available for your notebook: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-114872-1&cc=us&dlc=en&lc=en...
    It was released 6 days ago, so it might enable that option for you. It can't hurt to try it out. If not, you might just have to hold out a little bit until they update the driver. 
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Anybody else having issues with the new 1.1??

    For some reason, I have encountered two issues already.. Whenever I'm exporting my galleries as web pages, nothing happens! It creates a null folder that I specify but then doesn't export any photos or html pages.. If I delete the folder and do it again, the exact same way, for some miracle it then begins to export.. There is no logical explanation and its clear that its a bug..
    Also, when exporting multiple images into CS2, that also fails for me.. It only opens up one picture and even though the others are selected, it doesn't seem to do the trick.. Its not my computer because i have a brand new quad w/ 4 gigs of memory.. I didn't encounter either of these issues with the older version..
    Anybody else??

    I tried both, and was successfull both times.
    External Edit:
    1. I selected 2 images (D200 RAW images).
    2. Right clicked to get the contextual menu and selected Open with External Editor (I have my prefs set up for Photoshop).
    3. Both images opened in Photoshop.
    I can't image it being system specific. What camera and file type are you using?

  • Issues with the Surface Pro 3's pen in Photoshop CS6

    I used photoshop CS6 with no problems on my old computer that was connected to a graphics tablet.
    However, I recently bought a new windows computer called the Surface Pro 3. Everything works perfectly with the trackpad and touch, but I've had some issues with the Surface pen.
    The pen can draw on the canvas, but whenever I click something on any of the windows with the pen, the entire application freezes and I would have to click the computer's taskbar at the bottom to unfreeze the application.
    It's impossible to work like this. Is there any solution to fix this problem? It says that the version of photoshop I have is Adobe Photoshop Version: 13.1.2

    If you have Photoshop CS6 version 13.1.2 which is the Subscription version of Photoshop,  You shoule  Isstall Photoshop CC 2014 on your surface Pro 3.  It will work without problems on the surface Pro 3 and you will also have the option have the option to use Photoshop CC 2014 preference 2x UI to scale Photoshop's UI up in size on your Surface Pro 3.
    If you do not have a subscription the Perpetual version of windows CS6 should be version 13.0.1.3.  In that case the only way to scale Photoshop UI is to have windows do it. You would need to to update your windows 8.1 registry and add an external Photoshop manifest file in your Photoshop CS6 folder.  To get the Surface Pro 3 pen to work with Photoshop you would need to install NTig pen device drivers the support the wintab APIs.
    You will not be able to use Photoshop without a keyboard popping up the windows onscreen keyboard is too cumbersome.  You can use a utility like Touchkey to create Overlay touch keys on Photoshop and use Photoshop without a keyboard.
    The differece betweek Adobe 2XUI scaling an windows scaling ise windows scaling scalet the image areas as well as the Photoshops UI
    A couple of touchkey overlat keyboards could look something like this

  • Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?

    Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?

    Thanks Kelly,
    The answers would be the following:
    1200 cells per custom section (NEW COUNT), and up to 30 custom sections per spec.
    Assuming all will be populated, and this would apply to all final material specs in the system which could be ~25% of all material specs.
    The cells will be numeric, free text, drop downs, and some calculated numeric.
    Are we reaching the limits for UI performance?
    Thanks

  • Design issue with the multiprovider

    Design issue with the multiprovider :
    I have the following problem when using my multiprovider.
    The data flow is like this. I have the info-objects IobjectA, IobjectB, IobjectCin my Cube.(Source for this data is s-systemA)
    And from another s-system I am also loading the masterdata for IobjectA
    Now I have created the multiprovider based on the cube and IobjectA.
    However, surprisingly join in not workign in multiprovider correctly.
    Scenario :
    Record from the Cube.
    IObjectA= 1AAA
    IObjectB = 2BBB
    IObjectC = 3CCC
    Records from IobjectA =1AAA.
    I expect the record should be like this :
    IObjectA : IObjectB: IObjectC
    1AAA       :2BBB       :3CCC
    However, I am getting the record like this:
    IObjectA : IObjectB: IObjectC
    1AAA       :2BBB       :3CCC
    1AAA         : #             :#
    In the Identification section I have selected both the entries for IobjectA still I am getting this error.
    My BW Version is 3.0B and the SP is 31.
    Thanks in advance for your suggestion.

    May be I was not clear enough in my first explanation, Let me try again to explain my scenario:
    My Expectation from Multi Provider is :
    IObjectA
    1AAA
    (From InfoObject)
    Union
    IObjectA     IObjectB     IObjectC
    1AAA     2BBB     3CCC
    (From Cube)
    The record in the multiprovider should be :
    IObjectA     IObjectB     IObjectC
    1AAA     2BBB     3CCC
    Because, this is what the Union says .. and the Definition of the multiprovider also says the same thing :
    http://help.sap.com/saphelp_bw30b/helpdata/EN/ad/6b023b6069d22ee10000000a11402f/frameset.htm
    Do you still think this is how the behaviour of the multiprovider.. if that is the case what would be the purpose of having an infoobject in the multiprovider.
    Thank you very much in advance for your responses.
    Best Regards.,
    Praveen.

  • Issue with the App Store showing up blank.

    Issue with the App Store, it will not let me search for new apps.  The screen is blank.  The update section and features section works, but it will not let me search for new apps. I have restarted my phone and no changes. The newest update to the iphones when the iphone 5 came out, i think, messed up this app.  When i am looking at how to fix it, it tells me to delete it and try again, but the App store is not a deletable app.  Any ideas why my App store, specifically the search section of this app doesn't work?

    I suspect it is on Apple's side of things. Mine was blank too, but now it works again. Fixed itself one morning.
    https://discussions.apple.com/message/19659161#19659161

  • Performance issues with the Vouchers index build in SES

    Hi All,
    We are currently performing an upgrade for: PS FSCM 9.1 to PS FSCM 9.2.
    As a part of the upgrade, Client wants Oracle SES to be deployed for some modules including, Purchasing, Payables (Vouchers)
    We are facing severe performance issues with the Vouchers index build. (Volume of data = approx. 8.5 million rows of data)
    The index creation process runs for over 5 days.
    Can you please share any information or issues that you may have faced on your project and how they were addressed?

    Check the following logs for errors:
    1.  The message log from the process scheduler
    2.  search_server1-diagnostic.log  in /search_server1/logs directory
    If the build is getting stuck while crawling then we typically have to increase the Java Heap size for the Weblogic instance for SES>

  • Performance issues with the Tuxedo MQ Adapter

    We are experimenting some performance issues with the MQ Adapter. For example, we are seeing that the MQ Adapter takes from 10 to 100 ms in reading a single message from the queue and sending to the Tuxedo service. The Tuxedo service takes 80 ms in its execution so there is a considerable waste of time in the MQ adapter that we cannot explain.
    Also, we have looked a lot of rollback transactions on the MQ adapter, for example we got 980 rollback transactions for 15736 transactions sent and only the MQ adapter is involved in the rollback. However, the operations are executed properly. The error we got is
    135027.122.hqtux101!MQI_QMTESX01.7636.1.0: gtrid x0 x4ec1491f x25b59: LIBTUX_CAT:376: ERROR: tpabort: xa_rollback returned XA_RBROLLBACK.
    I am looking for information at Oracle site, but I have not found nothing. Could you or someone from your team help me?

    Hi Todd,
    We have 6 MQI adapters reading from 5 different queues, but in this case we are writing in only one queue.
    Someone from Oracle told us that the XA_RBROLLBACK occurs because we have 6 MQ adapters that are reading from the same queues and when one adapter finds a message and try to get that message, it can occurs that other MQ Adapter gets it before. In this case, the MQ adapter rollbacks the transaction. Even when we got some XA_RBROLLBACK errors, we don´t lose message. Also, I read something about that when XA sends a xa_end call to MQ adapter, it actually does the rollback, so when the MQ adapter receives the xa_rollback call, it answers with XA_RBROLLBACK. Is that true?
    However, I am more worried about the performance. We are putting a request message in a MQ queue and waiting for the reply. In some cases, it takes 150ms and in other cases it takes much more longer (more than 400ms). The average is 300ms. MQ adapter calls a service (txgralms0) which lasts 110ms in average.
    This is our configuration:
    "MQI_QMTESX01" SRVGRP="g03000" SRVID=3000
    CLOPT="-- -C /tuxedo/qt/txqgral00/control/src/MQI_QMTESX01.cfg"
    RQPERM=0600 REPLYQ=N RPPERM=0600 MIN=6 MAX=6 CONV=N
    SYSTEM_ACCESS=FASTPATH
    MAXGEN=1 GRACE=86400 RESTART=N
    MINDISPATCHTHREADS=0 MAXDISPATCHTHREADS=1 THREADSTACKSIZE=0
    SICACHEENTRIESMAX="500"
    /tuxedo/qt/txqgral00/control/src/MQI_QMTESX01.cfg:
    *SERVER
    MINMSGLEVEL=0
    MAXMSGLEVEL=0
    DEFMAXMSGLEN=4096
    TPESVCFAILDATA=Y
    *QUEUE_MANAGER
    LQMID=QMTESX01
    NAME=QMTESX01
    *SERVICE
    NAME=txgralms0
    FORMAT=MQSTR
    TRAN=N
    *QUEUE
    LQMID=QMTESX01
    MQNAME=QAT.Q.NACAR.TO.TUX.KGCRQ01
    *QUEUE
    LQMID=QMTESX01
    MQNAME=QAT.Q.NACAR.TO.TUX.KGCPQ01
    *QUEUE
    LQMID=QMTESX01
    MQNAME=QAT.Q.NACAR.TO.TUX.KPSAQ01
    *QUEUE
    LQMID=QMTESX01
    MQNAME=QAT.Q.NACAR.TO.TUX.KPINQ01
    *QUEUE
    LQMID=QMTESX01
    MQNAME=QAT.Q.NACAR.TO.TUX.KDECQ01
    Thanks in advance,
    Marling

  • I am having trouble connecting to my network all of a sudden. It is not an issue with the service/router. I keep getting kicked off and getting a ! in my airport... anyone know what's up with this?

    I am having trouble connecting to my network all of a sudden. I am able to connect to other networks but not my own. It is not an issue with the service/router because other devices connect fine. I keep getting kicked off and getting a ! in my airport. Last time it happended I called apple and the suggested I wipe my HD and reinstall everything. I did and it did not work. One day I turned my laptop on and it connected no problem. Now it has kicked me off again. I tried resetting my IP address but that does not work either! Has anyone had this problem?

    Try this:
    Apple menu / System Preferences / Network.
    Click Location: and select Edit Locations..
    Click + (plus sign), and enter a name for the new location - anything will do.
    Apply this.

  • Is there an issue with the hitachi hard drives in the MacBook Pro's ?  Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue.

    Is there an issue with the hitachi hard drives in the MacBook Pro's ?  Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue. Other drive I have had have lasted at least 5 or more years.

    there is a dylib you can put in the springboard if jailbroken but if not you have to find an apple store

Maybe you are looking for