Issue with the ROLES in Precalculation of WebTemplate in Reporting Agent.

HI BWers,
I am having trouble in understanding the functionality of ROLES and USERS in the Reporting Agent.
My goal is to pre-calculate WebTemplate,so the users can get the data results based on their ROLES.
-> When I select ROLES under Authorizations in Reporting Agent; my understanding was it will just pre-calculate the WebTemplate based on Roles. But, when I look at the job details its doing for the Users. I opted for   ROLES because I have 10-Roles and 100-Users, so the job runs for only Roles.
-> I don't want to select the Users, as it will take longer time and uses lot of system resources.
Can I just run for ROLES, for that under Authorizations in Reporting Agent do I need to select Precalculate User-Specifically and Select ROLES or just selecting ROLES will do. I tried both, just selecting ROLES is not working and selecting Precalculate User-Specifically & ROLES is not yielding the required results.
Could you please throw some light on it, I am on BW 3.5 & SP15.
Any help will be highly appreciated.
Regards,
swordfish.

Hi,
If you choose the Precalculate by User option, all the data and HTML pages for the Reporting Agent setting are precalculated for each of the selected users in a single job. This applies in both the cases: Roles or users. When you specify a role after selecting the option 'Precalculate by User', the precalculation will be done for all the users assigned to that role and not the role.
Roles/Users is just 2 different ways of giving the user restriction. If you specify the roles, the system will precalculate for all the users assigned to the role. If you have few users for whom you want the precalculation to be done, then you can specify the user IDs. If you have many users assigned to a particular role for whom you want the precalculation to be done, then you can specify the role.
Regards,
Shilpa

Similar Messages

  • Issue with Reviewer role

    Hi,
    Is anyone experiencing issues with the Reviewer role in Contribute?
    I have applied the Author > Review > Approver > Publish workflow association to templates. There have been no issues with the author, approver, publisher or administrator roles. However, if a draft is Sent for Review to someone with the reviewer role, the page does not display. The person with this role is able to see pages when they browse Contribute or when they edit a draft themselves, just not when a draft is sent to them.
    If the draft is Sent for Review to an Approver/Publisher/Administrator, they are able to view the draft.
    I have checked the role settings for the Reviewer and cannot see any problems with their settings. Any suggestions?
    Thanks.

    Hi Dominic
    That is correct, the page is not rendering when the reviewer selects the page received.
    Thanks

  • Creation of a second Exchange 2013 server on a different site (with the roles of MBX and CAS) fails on prepare active directory and prepare schema.

    Hello everyone
    I have a network infrastructure  consisting of 3 sites, site A, site B, and site C. i have 2 domain controllers on every site, and the AD roles are on the primary domain controller on site A. On site A I have an Exchange 2013sp1 CU6.
    I want to create a second Exchange on Site B, with the roles of mailbox (the exchange on Site A will be first DAG member and the Exchange on Site B will be the second member of the DAG) and CAS.
    First question: Is my  thought correct about installaing on the same server mailbox and CAS server?
    Second question: how many DAG witnesses I need for the DAG? One per site, or one in general (for example located on site A)
    Third question: When I am trying to perform “Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms”  I receive the error
    “ Setup encountered a problem while validating the state of Active Directory:
     The Active Directory schema version (15303) is higher than Setup's version (15292). Therefore, PrepareSchema can't be executed.  See the Exchange setup log for more information on this error. For more information, visit:
    http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.AdInitErrorRule.aspx “
    I tried  to run the PrepareSchema from  the ISO of Exchange 2013 SP1 and form the extracted content of Exchange 2013SP1 CU6 archive, but still receive the same error. Any ideas?
    Thanks in advance.

    Thank you for your answer,
    I have tried to run "Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms”  from
    Exchange 2013 CU6 media, but I still receive  the error:
    The Active Directory schema version (15303) is higher than Setup's version (15292). Therefore, PrepareSchema
    can't be executed.  See the Exchange setup log for more information on this error. For more information, visit:http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.AdInitErrorRule.aspx “
    any ideas?

  • Hp Envy X2 issues with the touchpad gestures

    I am experiencing some issues with the touchpad gestures after every time it wakes up. I am already update the drives posted in the hp web site, is anybody out there with the same issues?

    I couldn't find any graphic drivers for that notebook, but here is an updated chipset that is available for your notebook: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-114872-1&cc=us&dlc=en&lc=en...
    It was released 6 days ago, so it might enable that option for you. It can't hurt to try it out. If not, you might just have to hold out a little bit until they update the driver. 
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Anybody else having issues with the new 1.1??

    For some reason, I have encountered two issues already.. Whenever I'm exporting my galleries as web pages, nothing happens! It creates a null folder that I specify but then doesn't export any photos or html pages.. If I delete the folder and do it again, the exact same way, for some miracle it then begins to export.. There is no logical explanation and its clear that its a bug..
    Also, when exporting multiple images into CS2, that also fails for me.. It only opens up one picture and even though the others are selected, it doesn't seem to do the trick.. Its not my computer because i have a brand new quad w/ 4 gigs of memory.. I didn't encounter either of these issues with the older version..
    Anybody else??

    I tried both, and was successfull both times.
    External Edit:
    1. I selected 2 images (D200 RAW images).
    2. Right clicked to get the contextual menu and selected Open with External Editor (I have my prefs set up for Photoshop).
    3. Both images opened in Photoshop.
    I can't image it being system specific. What camera and file type are you using?

  • Issues with the Surface Pro 3's pen in Photoshop CS6

    I used photoshop CS6 with no problems on my old computer that was connected to a graphics tablet.
    However, I recently bought a new windows computer called the Surface Pro 3. Everything works perfectly with the trackpad and touch, but I've had some issues with the Surface pen.
    The pen can draw on the canvas, but whenever I click something on any of the windows with the pen, the entire application freezes and I would have to click the computer's taskbar at the bottom to unfreeze the application.
    It's impossible to work like this. Is there any solution to fix this problem? It says that the version of photoshop I have is Adobe Photoshop Version: 13.1.2

    If you have Photoshop CS6 version 13.1.2 which is the Subscription version of Photoshop,  You shoule  Isstall Photoshop CC 2014 on your surface Pro 3.  It will work without problems on the surface Pro 3 and you will also have the option have the option to use Photoshop CC 2014 preference 2x UI to scale Photoshop's UI up in size on your Surface Pro 3.
    If you do not have a subscription the Perpetual version of windows CS6 should be version 13.0.1.3.  In that case the only way to scale Photoshop UI is to have windows do it. You would need to to update your windows 8.1 registry and add an external Photoshop manifest file in your Photoshop CS6 folder.  To get the Surface Pro 3 pen to work with Photoshop you would need to install NTig pen device drivers the support the wintab APIs.
    You will not be able to use Photoshop without a keyboard popping up the windows onscreen keyboard is too cumbersome.  You can use a utility like Touchkey to create Overlay touch keys on Photoshop and use Photoshop without a keyboard.
    The differece betweek Adobe 2XUI scaling an windows scaling ise windows scaling scalet the image areas as well as the Photoshops UI
    A couple of touchkey overlat keyboards could look something like this

  • Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?

    Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?

    Thanks Kelly,
    The answers would be the following:
    1200 cells per custom section (NEW COUNT), and up to 30 custom sections per spec.
    Assuming all will be populated, and this would apply to all final material specs in the system which could be ~25% of all material specs.
    The cells will be numeric, free text, drop downs, and some calculated numeric.
    Are we reaching the limits for UI performance?
    Thanks

  • Design issue with the multiprovider

    Design issue with the multiprovider :
    I have the following problem when using my multiprovider.
    The data flow is like this. I have the info-objects IobjectA, IobjectB, IobjectCin my Cube.(Source for this data is s-systemA)
    And from another s-system I am also loading the masterdata for IobjectA
    Now I have created the multiprovider based on the cube and IobjectA.
    However, surprisingly join in not workign in multiprovider correctly.
    Scenario :
    Record from the Cube.
    IObjectA= 1AAA
    IObjectB = 2BBB
    IObjectC = 3CCC
    Records from IobjectA =1AAA.
    I expect the record should be like this :
    IObjectA : IObjectB: IObjectC
    1AAA       :2BBB       :3CCC
    However, I am getting the record like this:
    IObjectA : IObjectB: IObjectC
    1AAA       :2BBB       :3CCC
    1AAA         : #             :#
    In the Identification section I have selected both the entries for IobjectA still I am getting this error.
    My BW Version is 3.0B and the SP is 31.
    Thanks in advance for your suggestion.

    May be I was not clear enough in my first explanation, Let me try again to explain my scenario:
    My Expectation from Multi Provider is :
    IObjectA
    1AAA
    (From InfoObject)
    Union
    IObjectA     IObjectB     IObjectC
    1AAA     2BBB     3CCC
    (From Cube)
    The record in the multiprovider should be :
    IObjectA     IObjectB     IObjectC
    1AAA     2BBB     3CCC
    Because, this is what the Union says .. and the Definition of the multiprovider also says the same thing :
    http://help.sap.com/saphelp_bw30b/helpdata/EN/ad/6b023b6069d22ee10000000a11402f/frameset.htm
    Do you still think this is how the behaviour of the multiprovider.. if that is the case what would be the purpose of having an infoobject in the multiprovider.
    Thank you very much in advance for your responses.
    Best Regards.,
    Praveen.

  • Issue with the App Store showing up blank.

    Issue with the App Store, it will not let me search for new apps.  The screen is blank.  The update section and features section works, but it will not let me search for new apps. I have restarted my phone and no changes. The newest update to the iphones when the iphone 5 came out, i think, messed up this app.  When i am looking at how to fix it, it tells me to delete it and try again, but the App store is not a deletable app.  Any ideas why my App store, specifically the search section of this app doesn't work?

    I suspect it is on Apple's side of things. Mine was blank too, but now it works again. Fixed itself one morning.
    https://discussions.apple.com/message/19659161#19659161

  • Performance issues with the Vouchers index build in SES

    Hi All,
    We are currently performing an upgrade for: PS FSCM 9.1 to PS FSCM 9.2.
    As a part of the upgrade, Client wants Oracle SES to be deployed for some modules including, Purchasing, Payables (Vouchers)
    We are facing severe performance issues with the Vouchers index build. (Volume of data = approx. 8.5 million rows of data)
    The index creation process runs for over 5 days.
    Can you please share any information or issues that you may have faced on your project and how they were addressed?

    Check the following logs for errors:
    1.  The message log from the process scheduler
    2.  search_server1-diagnostic.log  in /search_server1/logs directory
    If the build is getting stuck while crawling then we typically have to increase the Java Heap size for the Weblogic instance for SES>

  • Performance issues with the Tuxedo MQ Adapter

    We are experimenting some performance issues with the MQ Adapter. For example, we are seeing that the MQ Adapter takes from 10 to 100 ms in reading a single message from the queue and sending to the Tuxedo service. The Tuxedo service takes 80 ms in its execution so there is a considerable waste of time in the MQ adapter that we cannot explain.
    Also, we have looked a lot of rollback transactions on the MQ adapter, for example we got 980 rollback transactions for 15736 transactions sent and only the MQ adapter is involved in the rollback. However, the operations are executed properly. The error we got is
    135027.122.hqtux101!MQI_QMTESX01.7636.1.0: gtrid x0 x4ec1491f x25b59: LIBTUX_CAT:376: ERROR: tpabort: xa_rollback returned XA_RBROLLBACK.
    I am looking for information at Oracle site, but I have not found nothing. Could you or someone from your team help me?

    Hi Todd,
    We have 6 MQI adapters reading from 5 different queues, but in this case we are writing in only one queue.
    Someone from Oracle told us that the XA_RBROLLBACK occurs because we have 6 MQ adapters that are reading from the same queues and when one adapter finds a message and try to get that message, it can occurs that other MQ Adapter gets it before. In this case, the MQ adapter rollbacks the transaction. Even when we got some XA_RBROLLBACK errors, we don´t lose message. Also, I read something about that when XA sends a xa_end call to MQ adapter, it actually does the rollback, so when the MQ adapter receives the xa_rollback call, it answers with XA_RBROLLBACK. Is that true?
    However, I am more worried about the performance. We are putting a request message in a MQ queue and waiting for the reply. In some cases, it takes 150ms and in other cases it takes much more longer (more than 400ms). The average is 300ms. MQ adapter calls a service (txgralms0) which lasts 110ms in average.
    This is our configuration:
    "MQI_QMTESX01" SRVGRP="g03000" SRVID=3000
    CLOPT="-- -C /tuxedo/qt/txqgral00/control/src/MQI_QMTESX01.cfg"
    RQPERM=0600 REPLYQ=N RPPERM=0600 MIN=6 MAX=6 CONV=N
    SYSTEM_ACCESS=FASTPATH
    MAXGEN=1 GRACE=86400 RESTART=N
    MINDISPATCHTHREADS=0 MAXDISPATCHTHREADS=1 THREADSTACKSIZE=0
    SICACHEENTRIESMAX="500"
    /tuxedo/qt/txqgral00/control/src/MQI_QMTESX01.cfg:
    *SERVER
    MINMSGLEVEL=0
    MAXMSGLEVEL=0
    DEFMAXMSGLEN=4096
    TPESVCFAILDATA=Y
    *QUEUE_MANAGER
    LQMID=QMTESX01
    NAME=QMTESX01
    *SERVICE
    NAME=txgralms0
    FORMAT=MQSTR
    TRAN=N
    *QUEUE
    LQMID=QMTESX01
    MQNAME=QAT.Q.NACAR.TO.TUX.KGCRQ01
    *QUEUE
    LQMID=QMTESX01
    MQNAME=QAT.Q.NACAR.TO.TUX.KGCPQ01
    *QUEUE
    LQMID=QMTESX01
    MQNAME=QAT.Q.NACAR.TO.TUX.KPSAQ01
    *QUEUE
    LQMID=QMTESX01
    MQNAME=QAT.Q.NACAR.TO.TUX.KPINQ01
    *QUEUE
    LQMID=QMTESX01
    MQNAME=QAT.Q.NACAR.TO.TUX.KDECQ01
    Thanks in advance,
    Marling

  • I am having trouble connecting to my network all of a sudden. It is not an issue with the service/router. I keep getting kicked off and getting a ! in my airport... anyone know what's up with this?

    I am having trouble connecting to my network all of a sudden. I am able to connect to other networks but not my own. It is not an issue with the service/router because other devices connect fine. I keep getting kicked off and getting a ! in my airport. Last time it happended I called apple and the suggested I wipe my HD and reinstall everything. I did and it did not work. One day I turned my laptop on and it connected no problem. Now it has kicked me off again. I tried resetting my IP address but that does not work either! Has anyone had this problem?

    Try this:
    Apple menu / System Preferences / Network.
    Click Location: and select Edit Locations..
    Click + (plus sign), and enter a name for the new location - anything will do.
    Apply this.

  • Is there an issue with the hitachi hard drives in the MacBook Pro's ?  Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue.

    Is there an issue with the hitachi hard drives in the MacBook Pro's ?  Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue. Other drive I have had have lasted at least 5 or more years.

    there is a dylib you can put in the springboard if jailbroken but if not you have to find an apple store

  • Issue with the presence indicator in list/library web part.

    When viewing a user field (Created By, Modified By or a custom People column) through the list web part (either through the default page /Forms/AllItems.aspx or a custom web part page using a list/library) the presence indicator always says presence unknown.
     However if I go to the Site Permissions on the same site, or My Site or a custom page using a modified core search results web part I wrote the presence indicator works fine.  I can't find any errors being reported on the server.  
    Looking at the rendered code the list web part generates:
    <IMG name=imnmark width=12 height=12 title="" class=ms-imnImg id=imn_48683,type=smtp alt="No presence information" src="/_layouts/images/blank.gif" border=0 sip="[email protected]">
    Locations where the presence indicator works the code is:
    <IMG name=imnmark width=12 height=12 title="" class=ms-imnImg id=imn{20140822-1752-098D-8C11-188AD0B8B8B6},type=sip alt=Available src="http://portal.mydomain.com/_layouts/images/imnon.png" border=0 sip="[email protected]" valign="middle">
    It appears that the List web part is not detecting that the users have a sip address and they appear to be rendered using smtp instead.  It's also odd that the list web part is pulling the correct sip address while the one that works is pulling the
    email address, not the sip address stored in the user profile.  I spent considerable time going through the xslt to try and figure how the tag is rendered but I haven't been able to figure it out.
    We are using Cisco Jabber 9.2.3 for IM, I don't know if that should make a difference or not. It's working fine in other parts of SharePoint and in Outlook. Running SharePoint Dec 2011 CU (14.0.6114.5000) with MS Office 2010 SP2 installed on the client. Tested
    in IE 9.0/10/11.
    Any ideas?

    We don't have a Lync server and I don't have the software available.  Are you saying just having Lync installed even though it won't work might help?
    I did some more digging and believe that this is an issue with the XsltListViewWebPart.  If I go to the UserInformationList the web part used to render the list is the ListViewWebPart and the presence indicator works there.  Also our environment
    was migrated from 2007 and there are a number of pages that are using the old ListViewWebPart and the presence indicator works fine in this part.  If edit the page and add the same list library to it, it's added as a XsltListViewWebPart and the presence
    indicator does not work.
    The presence control is not rendered by the xsl files used by the webpart.  I modified the xsl to display the raw xml and the html code for the presence is part of the xml.  I'm guessing this can't be changed and is part of how SharePoint is rendering
    the data for the XsltListViewWebPart.  You can see the Editor and CheckoutUser lines have the html code embedded in the data.
    <Row
    ID="60"
    PermMask="0x7fffffffffffffff"
    HTML_x0020_File_x0020_Type=""
    File_x0020_Type="xlsx"
    HTML_x0020_File_x0020_Type.File_x0020_Type.mapall="icxlsx.png|Microsoft Excel|SharePoint.OpenDocuments"
    HTML_x0020_File_x0020_Type.File_x0020_Type.mapcon="SharePoint.OpenDocuments"
    HTML_x0020_File_x0020_Type.File_x0020_Type.mapico="icxlsx.png"
    serverurl.progid="1http://myparkersdev.domain.com/sites/BPIT/_layouts/xlviewer.aspx?id=/sites/BPIT/Shared%20Documents/Database%20Sizes.xlsx"
    ile_x0020_Type.progid="SharePoint.OpenDocuments.3"
    File_x0020_Type.url="FALSE"
    FSObjType="0"
    FileRef="/sites/BPIT/Shared Documents/Database Sizes.xlsx"
    FileRef.urlencode="%2Fsites%2FBPIT%2FShared%20Documents%2FDatabase%20Sizes%2Exlsx"
    FileRef.urlencodeasurl="/sites/BPIT/Shared%20Documents/Database%20Sizes.xlsx"
    FileLeafRef="Database Sizes.xlsx"
    FileLeafRef.Name="Database Sizes"
    FileLeafRef.Suffix="xlsx"
    CheckoutUser="&lt;span class=&quot;ms-imnSpan&quot;&gt;&lt;a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'&gt;&lt;img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_77,type=smtp'/&gt;&lt;/a&gt;&lt;a onclick=&quot;GoToLink(this);return false;&quot; href=&quot;/sites/BPIT/_layouts/userdisp.aspx?ID=526&quot;&gt;Ian Howe&lt;/a&gt;&lt;/span&gt;"
    CheckoutUser.id="526"
    CheckoutUser.title="Ian Howe"
    CheckoutUser.span="&lt;nobr&gt;&lt;span&gt;&lt;a onclick=&quot;GoToLink(this);return false;&quot; href=&quot;/sites/BPIT/_layouts/userdisp.aspx?ID=526&quot;&gt;Ian Howe&lt;/a&gt;&lt;img border=&quot;0&quot; height=&quot;1&quot; width=&quot;3&quot; src=&quot;/_layouts/images/blank.gif&quot;/&gt;&lt;a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'&gt;&lt;img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_78,type=smtp'/&gt;&lt;/a&gt;&lt;/span&gt;&lt;/nobr&gt;"
    CheckedOutUserId="526"
    IsCheckedoutToLocal="0"
    Created_x0020_Date="0;#2014-08-22 09:47:01"
    Created_x0020_Date.ifnew=""
    ContentTypeId="0x0101000AE0EC76CD0DB743B42D2FE022EAA6DC"
    Modified="8/22/2014 10:51 AM"
    Editor="&lt;span class=&quot;ms-imnSpan&quot;&gt;&lt;a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'&gt;&lt;img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_79,type=smtp'/&gt;&lt;/a&gt;&lt;a onclick=&quot;GoToLink(this);return false;&quot; href=&quot;/sites/BPIT/_layouts/userdisp.aspx?ID=526&quot;&gt;Ian Howe&lt;/a&gt;&lt;/span&gt;"
    Editor.id="526"
    Editor.title="Ian Howe"
    Editor.span="&lt;nobr&gt;&lt;span&gt;&lt;a onclick=&quot;GoToLink(this);return false;&quot; href=&quot;/sites/BPIT/_layouts/userdisp.aspx?ID=526&quot;&gt;Ian Howe&lt;/a&gt;&lt;img border=&quot;0&quot; height=&quot;1&quot; width=&quot;3&quot; src=&quot;/_layouts/images/blank.gif&quot;/&gt;&lt;a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'&gt;&lt;img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_80,type=smtp'/&gt;&lt;/a&gt;&lt;/span&gt;&lt;/nobr&gt;"
    ecb.dispex="return DispEx(this,event,'TRUE','FALSE','FALSE','SharePoint.OpenDocuments.3','0','SharePoint.OpenDocuments','','1http://myparkersdev.domain.com/sites/BPIT/_layouts/xlviewer.aspx?id=/sites/BPIT/Shared%20Documents/Database%20Sizes.xlsx','526','526','1','0','0x7fffffffffffffff','','')" />
    I just find it strange that the old ListViewWebPart works.  Our SP environment has not been patched to the latest version, I'll try that next and see if it makes a difference.

  • Issue with the pVal.BeforeAction in Item_Pressed event

    Hi all,
    I am facing an issue with the <b>pVal.BeforeAction</b> in the <b>Item Pressed event</b>.
    In delivery notes, When I press the Add button, i am getting the control, which is passing through both of the if blocks [<b>if (pval.BeforeAction=True)</b>block and <b> if(pVal.BeforeAction=False)</b>].
    But
    When I try the delivery using <b>Pick and Pack Manager</b> form with in the Inventory Menu, I am getting the same Delivery form in Add Mode. When I click the Add button in the form, the control  is passing through the <b>if(pCal.BeforeAction=true)</b> block successfully, but after that, the form closes and it never comes to the <b>if(pVal.BeforeAction=false)</b> block.
    I need to run the codes, what i have written in the second if block, in this case also.
    Is it possible?
    Please help me to solve this issues.

    Hi,
    It's a known bug. As Rasmus said try the SBO2005A SP01 FormDataAdd Event.
    Regards,
    Ian

Maybe you are looking for