Issue with the site level access in the trial ac

I am following the given video to get an understanding of site level access.
SAP HANA Cloud Portal Setting Access Levels in the Site - YouTube
I could not find the option of setting the site level access to either public, restricted or private in my trial ac. in the site settings as per the given video above. Could this be some authorization issue or some settings that needs to be done.

Hello,
The site access level configuration is now under the Access Managment entry in the side panel.
Please follow the documentation in the link below.
SAP HANA Cloud Portal Documentation
Regards,
Eliel.

Similar Messages

Maintain access to network(shared folders) resources if the site loses access to a Domain Controller?

Scenario
Windows 7 users log on to workstations at a site. Domain Controller is up and does the domain authentication for those users across the WAN. Users are then accessing a local(same building) Shared directory on a Windows 2008r2 server, in order to open, modify,
save new files, etc.
Then, the site loses access to the Domain Controller due to a WAN outage.
Question
Will those users that have already logged onto their Windows 7 workstations continue to have access to the shared resources on the local Windows 2008r2 server with their cached credentials(assuming they don't logoff or restart their machines)?? This has
been the case in the past, but wondering if anything has changed with Windows 2008??
Thanks

Hi,
The duration that you can access the server depends on when the server requires re-authentication.
In Windows implementation, SMB session expiration is enforced based upon the client’s support of dynamic re-authentication capability [MS-SMB].
If the client enables the CAP_DYNAMIC_REAUTH capability bit, the server will enforce session expiration. If a client does not set CAP_DYNAMIC_REAUTH, the Windows server does not return STATUS_NETWORK_SESSION_EXPIRED.
The SMB dynamic re-authentication feature was introduced in Windows XP. From there, Windows-based clients set the CAP_DYNAMIC_REAUTH capability bit to indicate to the server that the client supports re-authentication when the Kerberos service ticket for
the session expires.
Windows servers do check CAP_DYNAMIC_REAUTH:
If clientCapabilities sets CAP_DYNAMIC_REAUTH, the server will set Server. Session.AuthenticationExpirationTime to the expiry time returned by AcceptSecuirtyContext.
If clientCapabilities does not set CAP_DYNAMIC_REAUTH, the server will not set Server. Session.AuthenticationExpirationTime, basically a CAP_DYNAMIC_REAUTH capability bit not set by the client means the session will not expire on the server side.
To configure Maximum lifetime for service ticket, you can use grouppolicy. The default value of
Maximum lifetime for service ticket
in Default Domain Policy is 600 minutes.
Note:This setting is applied to DC, not clients.
For detailed information, please view the link below
CIFS and SMB Timeouts in Windows
http://blogs.msdn.com/b/openspecification/archive/2013/03/19/cifs-and-smb-timeouts-in-windows.aspx
Maximum lifetime for service ticket
http://technet.microsoft.com/en-us/library/jj852188.aspx
Hope this helps.
Steven Lee
TechNet Community Support

Having issues with my MacBook. Even when the internet is disconnected, apps are still closing and opening on their own. I sometimes do not have control over my cursor.....any suggestions?

Having issues with my MacBook. Even when the internet is disconnected, apps are still closing and opening on their own. I sometimes do not have control over my cursor.....any suggestions?

There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not be apply in your case.
1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
2. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
3. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
4. Reset the System Management Controller.
5. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
6. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
7. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and the unit needs to be serviced or replaced.
8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

Hello, Im new to this website. Im having issues with my Macbook. I have the old 2009 model Macbook and it is our schools macbook. The school just upgraded these MacBooks to OSX Mavericks and when i try to open Minecraft it won't let me. It says no jd

Hello, Im new to this website. Im having issues with my Macbook. I have the old 2009 model Macbook and it is our schools macbook. The school just upgraded these MacBooks to OSX Mavericks and when i try to open Minecraft it won't let me. It says no jdk installed. I also try to install Java SE runtime but half way through the Software Update it says cant download software because of network problem but I'm connected to the internet and i can browse stuff just fine. Can any one help with my problems. P.S. I don't know the administrator password or stuff like that. And yes we are allowed to play games and stuff on these laptops but only at home not at school so don't tell me i need to focus on school and not games.

Since you updated the operating system, it is probably Minecraft is missing certain files that ware remove or are not longer comparable with the new version of the OSX. what I recommend, is to check is there is an update for Minecraft and install that. If there is not update available, probably the best thing will be reinstalling Minecraft. Hope this will help you.

Having an issue with vpn load balancing certificate on the vip

Hi all,
I am setting up vpn load balancing in a lab. I have two asa's running 8.6. I created a ucc cert from our internal CA that has the vip as the CN in the cert and the two ASA's themselves as subject alternative names. I used open ssl to create the request. In each asa I am using encryption between the ASA's to encrypt the psk's. Since this is a lab and I do not have the DNS servers at my disposal I've added the hostnames and addresses of each ASA to the config in the ASA's. The problem I have is that when I connect to the vip I get a cert error saying the cert doesn't match the name on the site. See below:
"The security certificate presented by this website was issued for a different website's address."
I have a hostfile on my lab pc connected directly to the outside of the ASA that can resolve the name of the vip but when I browse to the vip I get the cert error. If I click proceed anyway the asa redirects me and the page opens without error on one of the two ASA's.
Does any one know what the CN of the cert should be for vpn load balancing. I thought the CN would be the vip but sometinhg is not right.
Any help is appreciated.
Thanks.

Issue resolved. Switched the order of the trustpoints on the outside and vpn load balance.

When I click on an Icon on my desktop to take me to a site (such as google) I get a message that it could not find the loaction. Then it goes ahead and opens a Firefox window with the site anyway as if the message never happened.

When I click on an Icon on my desktop to take me to a site (such as Google) I get a message that it could not find the location. Then it goes ahead and opens a Firefox window with the site anyway as if the message never happened. Then when I close the window I see that the message is still there. I have to close it separately. Any suggestions? Oh, and this only happens if Firefox is NOT already active. If I have another Firefox window open when I click on the Icon, it just opens as expected. This message appears no matter which site Icon I select. It did not happen before I upgraded to ver 9.0.

Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz

Issue with VO which is attached to the picklist

Hi,
Currently i have an issue with VO which is attached to the picklist
if i try to attach the same VO (but query changed) to diff picklists , the picklists are overridden with last executed query (all the code is inside a loop)
while(rs.next()) {
String lookupDefn=rs.getString(2);
if (lookupDefn!=null) {
id="InputValue_Lookup"+count_lookup;
OAMessageChoiceBean oamessage=(OAMessageChoiceBean)webBean.findIndexedChildRecursive(id);
oamessage.setPickListCacheEnabled(false);
if (oamessage!=null) {
ElementInputValuesVOImpl oaviewobject = (ElementInputValuesVOImpl)am.findviewobject(ElementInputValuesVO1)
if(!(oaviewobject ==null))
oaviewobject.setWhereClause("lookup_type = '" + lookupDefn + "'");
oaviewobject.executeQuery(); //Setting where clause Dynamically of Poplist VO
// System.out.println("Query is"+);
oamessage.setPrompt(rs.getString(1));
oamessage.setListViewObject(pageContext, oaviewobject);
oamessage.setListDisplayAttribute("Meaning");
oamessage.setListValueAttribute("lookup_type");
oamessage.setPickListCacheEnabled(false);
any one please help :)

Use different instances of the VO for each picklist.

Content location mass update at the site level

Hi,
I am looking for a way to mass update the content location at the site level. Right now, we can do the mass update at the folder level. We have about 80 folders or so. Is there a way we can mass update the starting url at the site level?
Environment: Oracle iLearning 5.2.1
Thanks
Sud

If you are mass updating the content location, you need to inspect the following three tables in the ILEARN schema.
Table Columns Description
content_server host, physical_directory Content Server Definition
rco starting_url Self Explanatory
host_adapter adapter_path CMI Adapter
You might not have to change all of them, if you are only changing the path and not the host.
Scott
http://www.seertechsolutions.com

Recently updated Contacts details of customer at the Communication tab defined at the Site level in oracle AR

Hi Expert,
Please let me know How to find out recently updated Contacts details of customer at the Communication tab defined at the Site level in oracle AR.
Thanks in advance.

Hi -
Please use the below code to get the Contacts at the Account level.
where Sold to Org id is the Customer Account Id.
SELECT hp2.person_last_name||', '||hp2.person_first_name
FROM apps.hz_parties hp,
apps.hz_parties hp2,
apps.hz_relationships hr,
apps.hz_cust_accounts hca
WHERE 1 = 1
AND hca.party_id = hp.party_id
AND hca.cust_account_id = :sold_to_org_id
AND hr.subject_id = hp.party_id
AND hr.relationship_type = 'CONTACT'
AND hp2.party_id = hr.object_id
AND hr.object_type = 'PERSON'
AND hp.party_id = hr.subject_id
Thanks
Vyaghresh
Edited by: user11990386 on Jun 20, 2011 2:33 PM

Contacts details of customer at the Communication tab defined at the Site level in oracle AR

Hi Expert,
Please tell me that how I find out recently updated Contacts details(Multiple contacts) of customer at the Communication tab defined at the Site level in oracle AR
Thanks in advance.

Hi Octavio,
Thank you for sending me this query. I am working on Customer Interface in R11i. For updating the records I need to check already existing data for a particular customer in a particular site. I am getting all the details except the communication tab details.
I am writing the below query but it is giving multiple rows and same data. Some phone numbers and email addresses are missing in the communication tab . Please correct me what mistake i am doing.
SELECT hcp.email_address,
,hcp.phone_area_code
,hcp.phone_number
,hcp.phone_extension
,hcp.phone_line_type
FROM ra_customers rc
,ra_addresses_all raa
,hz_party_relationships hpr
,hz_contact_points hcp
WHERE rc.party_id = raa.party_id
AND rc.party_id = hpr.object_id
AND hcp.owner_table_id = raa.party_site_id
AND rc.orig_system_reference = 'C100233' -- This I will get from the file for update
AND raa.orig_system_reference = 'A100961' -- This I will get from the file for update
AND hcp.orig_system_reference = '<Phone Reference>' -- This I will get from the file for update
Regards
Dev

Hello I downloaded adobe after effect CS6, but it is not installed and asks to install Adobe Support Advisor. I turn to the site and there wrote: "The Adobe Support Advisor tool was used to analyze installer log and system information associated with inst

Hello I downloaded adobe after effect CS6, but it is not installed and asks to install Adobe Support Advisor. I turn to the site and there wrote: "The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation . " What do I do?

yes, I did that with helping message 3, I'd remove Cs6 only, but it did not help. The message "Failed to initialize the setup program. To identify the problem, download the program Adobe Support Advisor" repeat again =(

I am having font issues with font book. It validates the font, yet it is not availabe in my software programs (Adobe or Microsoft). What can I do to use these fonts?

I am having font issues with font book. It validates the font, yet it is not availabe in my software programs (Adobe or Microsoft). What can I do to use these fonts?
I actually created these fonts with fontagrapher in 1998 and have been using them regularly ever since and now they are not available in InDesign. I really need to use them.

I found a page on Adobe, Troubleshoot fonts | Mac OS X
On PostScript type 1 fonts you need to copy/move the fonts to the correct font folder because Font Book doesn't copy them into the folder. Select the fonts double-click the fonts and Find in the font Book app and validate.
The correct font folder depends how you are set up. I am by myself so my font folder was MyHarddrive/Library/Fonts. I was using Suitcas fusion and the fonts are located in a different folder.
Most of the fonts have worked. Go to
http://helpx.adobe.com/x-productkb/global/troubleshoot-fonts-mac-os-x.html
This should help. Good Luck.

Taking down a live site from Adobe Muse. The site is one of the five that come with the package?

Taking down a live site from Adobe Muse. The site is one of the five that come with the package?

The portal you looking for is " the free partner portal " link : http://www.businesscatalyst.com/Admin/Index.aspx?to=PartnerPortal , where all the sites are listed. However, specifically for creative cloud free sites , you delete the site via Site Management option in admin.

HT4623 Is anyone else having issues with scaling down photos to fit the screen for home and lock screens with ios7??

Is anyone else having issues with scaling down photos to fit the screen for home and lock screens with ios7?? Installed ios7 this morning. Tried to use one of my photos from camera roll as background for lock screen and I can't scale the photo to fit the screen. Never had a problem before and now when I pinch the photo to get it to the right size of the screen, it won't stay that way. The photo is enlarged way beyond the screen size so it doesn't look right. Does anyone know how to fix this?

Hello, cliffiapp4.
Thank you for visiting Apple Support Communities.
Here are the steps that I would recommend going through when experiencing this issue.
Resolution
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If the above steps do not resolve the issue, contact Apple.
iOS: Not responding
http://support.apple.com/kb/TS3281
Cheers,
Jason H.

How can i add a special user to the "site collection administrators" of the personal site on sharepoint online when the personal site is creating ?

when a new personal site is created on the sharepoint online 2013， then the administrator of this personal site will be himself. we can add another person to the "site collection administrators", then this person have full control of this personal
site.
but my request is : add this personal to the personal site when the personal site is creating, but not after the personal site has created ?
Is anybody know how to do that?

Hi,
According to your post, my understanding is that you want to add a special user to the "site collection administrators" of the personal site on sharepoint online when the personal site is creating.
Per my knowledge,
there is no out of the box way to accomplish this with SharePoint.
This is a forum which is supported for SharePoint On-Premise.
Regarding SharePoint Online, for quick and accurate answers to your questions, it is recommended that you initial a new thread in Office 365 forum.
Office 365 forum
http://community.office365.com/en-us/forums/default.aspx
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

Issue with the site level access in the trial ac

Similar Messages

Maybe you are looking for