Issue with Time Machine and WD Elements external drive
I am experiencing continuous problems with Time Machine set to back up to a WD Elements 1TByte external disk; appears to backup files perfectly but I'm plagued by recurring message 'The disk was not ejected properly...'. Dealer assures me that the disk is fine. No problem if Time Machine is disabled. But then I have no back up...
christopherfromadelaide wrote:
In fact, when I turn off Time Machine, I still get the ... message, which flashes up every 30 secs or so, and only goes away when I unplug the external drive.
That indicates that the problem may not involve Time Machine at all.
To be sure everything else is ok, verify your internal HD and repair the WD drive, per #A5 in Time Machine - Troubleshooting
If the problems persist, try different port(s), cables, and combinations of the two (a plug that works fine in one port may only make marginal/intermittent contact in another). Also make sure the WD's power cable is snug and secure, and it's plugged-in to a good power source.
Similar Messages
-
I'm using Time Machine and a LaCie external drive to backup. I also have a 8 GB LaCie flash drive I want to use for small jobs. If I plug the LaCie flash drive in, is my Mac going to think it is the LaCie external drive and start trying to backup?
no.
-
Time Machine and partition on external drive
Planning to buy a big external drive, but, is it possible to partition the external drive and make TM work on one ?
Absolutely, in fact it is recommended to give TM its own partition. Use the first partition of the drive (that's the one that ends up at the top of the list in Disk Utility).
Make sure the partition is double, if not three times, the size of what you will be backing up.
Note that you have the option (Sys Prefs-TM-Options) to exclude drives and folders from backups. This may save a lot of space and is useful for the applications folder (as you likely have that stuff on CD/DVD), for music (if you have it on CDs), the downloads folder etc; see [this page|http://www.ryanblock.com/2008/05/good-folders-to-exclude-from-time-machine -backups] for more ideas on what to exclude so as not to backup unnecessary stuff. Also, if you work with scratch disks (in Photoshop or video applications, for instance), exclude them as well as that's just unnecessary.
/p -
Time machine and files on external drive
When I first got my MacBook Pro, I left some old files on the external drive that I had been using for files. But then when I set TM up, I used that external drive, not realizing that I can no longer retrieve files except through TM. Now, that TM has filled up, I need to reset some things and do it right this time. I figure I will need to erase the entire drive and start over with partitions.
Am I out of luck to retrieve those files that were not associated with TM? If not, let me know how to find those files.
thanksTechnically you can but it is not a very good idea at all. The reason it is a flawed idea is if the HD fails (not really if but when) you will have defeated the whole idea of backup. A failure means you will lose the data files you stored on it and it's backup! A good backup plan has at least 2 forms of backup because backups can fail too. I would strongly recommend getting at least one additional external HD and use it for storing the data files you wanted off the internal HD and use the second for a Time Machine backup drive.
Personally I have 3 external HD's attached to my computer. Disk 1 is my Time Machine backup, Disk 2 is a Bootable Clone of my internal HD and Disk 3 stores my music, photography and movie libraries.
Please read these articles, they will discuss different backup strategies and I think you will see that each suggest redundant backups.
Backup Plan I
Backup Plan II
Backup Plan III -
Hi,
I'm trying to back up my macbook with time machine on the Lacie external driver I usualy use for this, but today my computer doesn't find the driver. I haven't done back up in 6 month.
Today, the Lacie driver is pluged and running, but the computer just does'nt find it.
what shall I do ?Some things to consider:
Is the drive mounted, i.e., visible via Finder and/or on the Desktop?
Is the drive still selected in System Preferences, Time Machine? If not, use the "Select Disk" button.
Is Time Machine still turned on (System Preferences, Time Machine)?
Can you see the drive (and mount it) using Disk Utility (in your Utilities folder)?
charlie -
I have just upgraded to Mavericks and have been using Time Machine on an external disk with Snow Leopard. Can I continue to backup with Time Machine on the same external disk or do I need a new disk since the operating system has changed?
Hi there,
I found that Time Machine in Mavericks will sort it all out for you. You shouldn't need to buy another backup drive, unless you have insufficient space left and can't afford to delete whats on there. It should just work fine. -
Partitioning an External 320gb drive for use with Time Machine and...
I want to be able to use my Western Digital 320GB external drive for use with Time Machine and to use as extra storage space on both my Mac and when I boot into Windows Vista.
Is this possible?
I was playing around in Disk Utility and would I partition the part I want to use for Time Machine with the Mac OS Journaled, and whatever I want as space for windows, use a MS - DOS format?
Has anyone done this before?
Cheers-Unless you are using 64 bit version of MSWindows (64 bit XP/Vista), it won't be able to handle a disk with GUID partition table (GPT). Disks with Apple Partition Map (APM) or GUID partition table are the only ones that Time Machine will work with (not MBR disks). Note also that the MBR/APM/GPT are at the DISK level and not the partition level, so don't mix the format with partitioning scheme. Time Machine disks are meant to live in the Mac universe (for now, anyway) and sharing with the MSWindows 32-bit universe is not possible.
See http://img87.imageshack.us/my.php?image=macpcdiskdd06sv8.png for some additional background. -
Recently my MacBookPro locked up on startup. Could not get past a certain point of progress bar. I had upgraded to Yosemite few weeks back, with no issues. I ended up doing a Recovery with Time Machine and I got all my apps, photos, documents, etc. back okay --- except I got error messages that my "registration for Photoshop (I use CS4 Extended) and Photo Mechanic are no longer working". I worked on Photoshop first, and tried (several times) to fix it with their online help suggestions. Nothing worked.
Is there a simpler way to "get my licenses/registrations back"??? I am also going to contact Camera Bits about the Photo Mechanic issues. ThanksSame problem and for months now. I haven't been able to find a solution, but I suspect that's because I don't know exactly what's wrong.
-
QUESTION.
Hallo , my question is ;whenever I delete a photo and restore it through Time machine and Western digital external hard drive , I am able to restore the photo but not the titles and descriptions . Western Digital inform me that it isn't their external hard drive problem and suggest that it is an Apple software problem ?
I am using a Macbook 4.1 , with Mac OSX 10.5.8 . I photo 7.1.5 , last modifie4d 01/05/2010 -universal . Should I be upgrading Iphoto ?
I hope that someone is able to help in this matter , as i have to restore 12000 photos !
Thanking you in anticipation.
Alan from WigtonHallo Kieth ,
I am not quite ready to restore the full iphoto library , as I have days of work re - imputting titles,descriptions and enhancement . I hope that your suggestion works , as I use my Macbook basically to work with digital photography. Through time , I will need to delete my library to recover more disc space and I would hate to have to spend more time re - imputting titles and descriptions all over again .
Thanks for your interest and advice.
regards - Alan -
I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite. Now have numerous problems. Is it possible to go back in time with Time Machine and reinstall Snow Leopard? Then upgrade to Lion or Mavericks? Any other ideas on how I can exit Yosemite?
Once you get yourself back to Snow Leopard, if you still want to upgrade somewhat, I would suggest the following:
1. Get an external hard drive that you can use for experiments with new OS versions. You could partition it into 2 or 3 partitions. You could then clone your existing Snow Leopard system to one partition using Carbon Copy Cloner (well worth $40) or SuperDuper ($25).
2. Buy OS X Mountain Lion for $20, through the Apple online store (I don't think it's available through the App Store). Apple has decided to make it very difficult for anyone to get Mavericks unless they have already downloaded it.
You will receive two e-mails from Apple, one containing a PDF with a redemption code, and one with the password you will need to unlock the PDF. Using the code, you will download Mountain Lion from the App Store, where it will appear among your Purchased items.
After ML finishes downloading, its installer app will launch itself. When you see this launch screen, QUIT the install app immediately! Go to your applications folder, find the Install OS X Mountain Lion app, and copy it to a safe location outside of your Applications folder. Keeping one or more copies will allow you to reinstall without unnecessary aggravation if you later need or want to do that. At this point, you can re-launch the Installer in the Applications folder and let it run. You can install it on a clean partition on your external HD, or you can allow it to upgrade the Snow Leopard clone you created on your external drive, or you can do both. This should allow you to test how everything works for as long as you like.
3. If you left yourself a free partition on your test drive, try a clean install of Yosemite and set everything up from scratch (do not migrate anything). This will allow you to see whether your problems with it were related to something in your Snow Leopard system. -
Cannot see backups with Time Machine and Aiport Extreme
My MacBook Pro is backing up to to an Airport Extreme with a USB drive attached to it. The backing up seems to be working. ie time machine say's it backed up my machine.. eg at 1.57.pm today.
When I enter time machine to try and get a backup, it's not there... it has one finder window for "Now" (1st April) and then the next one in the list is 23rd of March. SO I cannot see any of today, yesterday or another other recent backups.
BTW, I had originally made a backup directly to the USB drive. I am not sure of the date but it could have been 23rd of March.
Any ideas?Hey
I have the exact same problem. I have just switched from direct firewire-based Time Machine backup to an external drive, to said drive now connected to my Airport Extreme. I knew that it wouldn't accept the old TM backups, so I started up: Started the initial backup wirelessly, the unplugged it, and finished it via firewire. All worked fine, and the sparseimage was recognized and so on. After it was done, I attached the drive to the AE again, and it backup up as it was supposed to 3-4 times a day.
That was 3 days ago. But when I checked my TM yesterday, there was just the "today" window, and I couldn't browse anything. Today it's the same story. What gives?
Now, I opened the sparseimage on the TM drive to see if the incremental backups were there, and they were all there, but somehow TM doesn't read them. Can anybody who has a working TM wireless backup tell me if TM mounts the sparseimage to when launched and unmounts it afterwards?
TM worked great before when connected directly – never had a problem before and something tells me it's a problem with the sparseimage...Nevertheless, if it can't be fixed, I am back to friewire-based TM backup ;-<
Message was edited by: Hedemann -
Am replacing airport extreme with Time Machine and want to upgrade from Tiger to Snow leopard. Am told I should manually back up into T Machine before OS update but set up utility won't allow anything with OS below 10.5 and I'm 10.4.11. What to do?
I think you mean you are replacing your Airport Extreme with a Time Capsule. Time Machine is software integrated into OS X 10.5 & 10.6 used to automatically backup a system to an external HD. Time Capsule is an Airport Extreme that has a hard disk integrated into it that can be used for storage or as a Time Machine backup drive.
Because you are currently on Tiger 10.4.x you can backup to a external HD using SuperDuper or Carbon Copy Cloner. Having a backup is very wise before doing any major system update. After you have created the backup and have successfully upgraded to Snow Leopard you can still use the external HD for many things. The strategy I'd recommend is to use the new Time Capsule as your Time Machine backup and then use the external HD as backup using SuperDuper or CCC. Redundant backups is wise because backups can (and do) fail too! In addition both SD and CCC are bootable clones, this is useful in that if your internal HD crashes you can boot from a cloned drive and continue working until the internal HD is replaced.
Below are some links to some articles from MacWorld, I would recommend reading them where you find a common theme, redundant backups. Backup Plan I, Backup Plan II & Backup Plan III.
Roger -
have imac 27 inch. I plan to bootcamp the drive and install win 7 ultimate to run AutoCAD. I want to backup the imac using time machine and the boot camped drive to one device. Can time capsule be partitioned to use time machine for osx and win 7 backup for bootcamp drive.
You cannot backup a Windows partition or system using Time Machine. Nor can you partition a TC as far as I know although Airport Utility may allow that now. See:
A whole lot about Time Machine for help with TM problems. Also you can select Mac Help from the Finder's Help menu and search for "time machine" to locate articles on how to use TM. See also Mac 101- Time Machine.
Of course you should carefully read the documentation that came with your TC to find out what options are available. -
With Time Machine I have an external hard drive formatted with Mac
With Time Machine I have an external hard drive formatted with Mac. The record contained files windows. How to recover?
Serious mistake: to connect a Mac to an external drive with data (important!) Windows, the warning appears: "You want to use the disk for Time Machine?" Wrong button, so in 2-3 seconds, the disk is formatted. Now Mac "sees" the disc but empty, Windows does not see it under "My Computer" but in "Disk Management" is reported as "hard core", "healthy", "GPT protective partition" Is there a way to retrieve the files? Sorry for my English ThanksI'm having a difficult time following, I understand English isn't your native language. You may have good luck with Google Translate.
Also please read Pondini's Time Machine FAQs & Time Machine Troubleshooting. -
Has anyone had had success with Time Machine and Airport Express 6th gen?
For the last six months I have attempted to use the Time Machine product to provide first level backup for my two MacBook Airs and iMac. Tryed a number of powered USB drives, tryed all of the current 10.8, 10.9 OSX software. The Time Machine product seems to work for about a month to six weeks and then fails with message about the file integrity or access problems. In all cases I can acess files on the drive and the only application that struugles with the AE usb drive is Time Machine.
You would think that if it works for a month it should work for a year?
I have purchased Carbon Copy Cloner and it seems to function without a problem and I think that I am probably better off with a once a day clone than a Time Machine with data integrity problems.
Has anyone had long term success with Time Machine and AE sixth gen?You are connecting a USB hard disk to the new 802.11ac AirPort Extreme, not an Express, correct? If so, it works fine with both bus powered and self-powered drive enclosures, and I have no immediate explanation for what's going on.
You would think that if it works for a month it should work for a year?
Yes, besides the passage of time the only thing that is changing is the amount of available space on the backup volume, which could be a factor. Are you using separate drives for each Mac, or are they all being backed up to the same drive? If it's only one drive, is it partitioned or are they all sharing a single partition?
Are you sharing backup volumes with other, non-Time Machine files? That shouldn't cause the problem, but it's not a good idea.
What errors are being logged in system.log? Filter for backupd to find all Time-Machine related entries.
Maybe you are looking for
-
Hello, i'm trying to make a slide based on a .json file, but i can't manage in making the animation run. code for stage: $.getJSON("data.json").success( function(data){ $.each(data, function(index, item){
-
Table of Contents Showing on Desktop, but not in iPad preview
The table of contents was working just fine, meaning that it showed in both the work on the desktop and then when I sent a preview to the iPad. I'm not sure what I have done, but now, while the TOC shows on the desktop version, it doesn't show up in
-
I bought CR 2008 to do a stand alone Java project. I downloaded the "One-step" Eclipse package and installed it. It ran - well it came up. I could not run any samples, because there were no library utilities installed. I added them, but they didn't r
-
Unable to setup/mapping of XSQL Servlet
We have installed Apache web server with Tomcat Servlet engine. We have downloaded XDK 9i for Java and we have done the setup of Classpath in tomcat.bat. When we try to run the XSQL file from the browser (IE5), it opens as a text file instead of runn
-
F: EPS Import unter AI, bei wem geht das?
Hallo, ich schlage mich mit einem eigntlich nicht zu uebersehenden Bug von AI 10 unter MacOS 9 und 10.2 herum. AI verdreht Teile einer EPS Datei um 90Grad. Dh ein Teil des EPS-Datei wird (wenn auch auf dem Kopf) importiert und andere Teile um jene 90