Issue with time sheet data source
Hi All,
We are on ECC 5.0.
I am trying to load CATS timesheet data into BW thorugh data sources 0CA_TS_1 (approved time). This data source fetches data from CATSDB table.
In CATSDB there is a good amount of data with Status '30' i.e. 'Approved'.
However on running RSA3 checker this datasource is returning 0 records.
The only SAP note most relevant was 509592. But it is valid for older versions.
The ECC HR is on Level 10 and support pack SAPKE50010.
This issue has been unresolved in previous threads.
Please suggest any solution. Its urgent. Points for sure.
Thanks
Vishno
Hi Guillaume
Thanks for the reply
I had a glimpse on above link.
1) Above link says need to perform below steps. Where we need to run below steps (SQL Server or AD Server)
Sorry for asking basic question
Click Start, click Run, type Adsiedit.msc, and then click
OK.
In the ADSI Edit snap-in, expand Domain [<var>DomainName</var>], expand
DC= <var>RootDomainName</var>, expand CN=Users, right-click
CN= <var>AccountName</var>, and then click Properties.
In the CN= <var>AccountName</var> Properties dialog box, click the
Security tab.
On the Security tab, click Advanced.
In the Advanced Security Settings dialog box, make sure that
SELF is listed under Permission entries.
2) Link talks about Windows Server 2000 version. Is this applicable for 2008 ?
Regards
Santosh
Similar Messages
-
Issue with setting Planning Data Source
I keep getting error when I try to set up the data source
the Oracle database = orcl
The data base schema EPMAPLAN
Password = EPMAPLAN
when i log on i to Oracle Database
Sys as SYSDBA
Password = Password01
so what what should be the Database Source Name = ORCL Correct ????
Server = win-392h1l307n1 or localhost
Databse = ORCL
User Name = ????????????
Password = ?????????
I try all the combinations
Please adviseDuplicate post - Issue with setting up planning data source
Cheers
John
http://john-goodwin.blogspot.com/ -
Weblogic 10.3 Issue with Creating OLAP4J Data Source.
I can connect to SSAS per the DriverManager but using the same params the Data Source fails.
Here are the Data Source parameters that I am using.
Name: NPW-SSAS-CLAIMS-CUBE_DS
JNDI Name: ssas_Claim_Cube_DS
Database Type: Other
Database Driver: Other
Database Name: TECC V520
Host Name: transportationssas2k8te.atldc.nscorp.com
Port: 8080
Database User name: synpwtd
Password: The correct pw was entered
Driver Class Name: org.olap4j.driver.xmla.XmlaOlap4jDriver
URL: jdbc:xmla:Server=http://gaatlittclm01d/transportationssas2k8te.atldc.nscorp.com/transportation/msmdpump.dll
Properties: user=synpwtd
Test Select: Blank
Here is the error that I receive.
Response: '401: Unauthorized'
I anyone has any suggestion I welcome them. So far I can not file docs on the web that cover configuring a olap data source for Weblogic 10.3.
Thanks for any help.we are setting the below parameters,
MEM_ARGS="-Xms1024m -Xmx1024m"
MEM_PERM_SIZE=-XX:PermSize=128m
MEM_MAX_PERM_SIZE=-XX:MaxPermSize=256m
Please do the needful for this. Also if the parameter settin is not correct please give the correct settings.
Thanks -
Hi Experts,
we need to extract the data from <b>0ca_ts_is_1</b>(Time sheet data (Approved) but the problem is the no of records in the table <b>CATSDB</b> is <b>849</b> but in RSA3 (0ca_ts_is_1) there are <b>500</b> records only.
What could be the resons?.
could you kindly suggest me any thing.
Thanks,
Shaliny. Mno
i have increased the no of records and also calls
still i am getting only 500+ records only
thanks,
shaliny -
Hi Experts,
we need to extract the data from 0ca_ts_is_1(Time sheet data (Approved) but the problem is the no of records in the table <b>CATSDB</b> is <b>849</b> but in <b>RSA3</b> (0ca_ts_is_1) there are <b>500</b> records only.
What could be the resons?.
could you kindly suggest me any thing.
Thanks,
Shaliny. M..the data may be summarized
what is the level on granularity in CATSDB
Is all the fields in this table are seen in the datasource 0ca_ts_is_1
If some fields are missing the data is summarized to the next available level of granularity
You can see the combined totals of table contents and RSA3 total contents of certain key figures to ensure this -
Hi
I am trying to do Goods Issue with PI sheet in SAP v4.7c. I have used the following characteristics however only the finish product and the qty comes up in the PI Sheet.
can any one please let me know what should be done to have components assigned to the phase or irresepective of the phase:
The scope of the Component Recipe destination is 03: for all order items and reservation and
the position is 05: at the start of the phase
The characteristics used are:
PPPI_INPUT_GROUP Material list
PPPI_MESSAGE_CATEGORY PI_CONS
PPPI_PROCESS_ORDER
PPPI_RESERVATION
PPPI_RESERVATION_ITEM
PPPI_MATERIAL
PPPI_VARIABLE 'MYVAR&0050&'
PPPI_MATERIAL_CONSUMED
PPPI_UNIT_OF_MEASURE
PPPI_AUTOMATIC_VALUE Event date
PPPI_AUTOMATIC_VALUE Event time
PPPI_OUTPUT_TEXT Material
PPPI_OUTPUT_CHARACTERISTIC PPPI_MATERIAL
PPPI_OUTPUT_TEXT Material quantity-target value
PPPI_OUTPUT_CHARACTERISTIC PPPI_MATERIAL_CONSUMED
PPPI_OUTPUT_TEXT Unit of measure
PPPI_OUTPUT_CHARACTERISTIC PPPI_UNIT_OF_MEASURE
PPPI_INPUT_REQUEST Material quantity-actual value
PPPI_DEFAULT_VARIABLE 'MYVAR&0050&'
PPPI_REQUESTED_VALUE PPPI_MATERIAL_CONSUMED
PPPI_VALIDATION_FORMULA ( X > ( 0.95 * 'MYVAR&0050&'))
PPPI_VALIDATION_FORMULA AND
PPPI_VALIDATION_FORMULA ( X < ( 1.05 * 'MYVAR&0050&'))
PPPI_OUTPUT_TEXT Unit of measure
PPPI_OUTPUT_CHARACTERISTIC PPPI_UNIT_OF_MEASURE
PPPI_INPUT_REQUEST Batch
PPPI_REQUESTED_VALUE PPPI_BATCH
PPPI_MESSAGE_CATEGORY SIGN
PPPI_PROCESS_ORDER
PPPI_CONTROL_RECIPE
PPPI_OPERATION
PPPI_PHASE
Can any one please let me know where am I missing!!
Thanks in advance
-RahulThis is at control recipe creation or you are checking the instruction in the process order ?
This is a simple PI which is working OK fo rmaterial consumption.
Check it.
10 PPPI_DATA_REQUEST_TYPE Solicitud de datos simple
20 PPPI_MESSAGE_CATEGORY PI_CONS
30 PPPI_UNIT_OF_MEASURE
40 PPPI_OPERATION
50 PPPI_OUTPUT_TEXT Operación
60 PPPI_OUTPUT_CHARACTERISTIC PPPI_OPERATION
70 PPPI_PHASE
80 PPPI_OUTPUT_TEXT Fase
90 PPPI_OUTPUT_CHARACTERISTIC PPPI_PHASE
100 PPPI_RESERVATION
110 PPPI_OUTPUT_TEXT Reserva
120 PPPI_OUTPUT_CHARACTERISTIC PPPI_RESERVATION
122 PPPI_RESERVATION_ITEM
126 PPPI_OUTPUT_TEXT Item
127 PPPI_OUTPUT_CHARACTERISTIC PPPI_RESERVATION_ITEM
150 PPPI_PROCESS_ORDER
160 PPPI_AUTOMATIC_VALUE Hora de evento
170 PPPI_AUTOMATIC_VALUE Fecha de evento
180 PPPI_MATERIAL
190 PPPI_OUTPUT_TEXT Code
200 PPPI_OUTPUT_CHARACTERISTIC PPPI_MATERIAL
210 PPPI_MATERIAL_SHORT_TEXT
220 PPPI_OUTPUT_TEXT Material
250 PPPI_OUTPUT_CHARACTERISTIC PPPI_MATERIAL_SHORT_TEXT
300 PPPI_MATERIAL_QUANTITY
330 PPPI_OUTPUT_TEXT Plan
360 PPPI_OUTPUT_CHARACTERISTIC PPPI_MATERIAL_QUANTITY
400 PPPI_MATERIAL_CO_PRODUCT
500 PPPI_OUTPUT_TEXT Um
600 PPPI_OUTPUT_CHARACTERISTIC PPPI_UNIT_OF_MEASURE
700 PPPI_INPUT_REQUEST Lote
800 PPPI_BATCH
900 PPPI_REQUESTED_VALUE PPPI_BATCH
1000 PPPI_INPUT_REQUEST Cantidad Real
1100 PPPI_MATERIAL_CONSUMED
1200 PPPI_REQUESTED_VALUE PPPI_MATERIAL_CONSUMED
1300 PPPI_INPUT_REQUEST Sloc
1400 PPPI_STORAGE_LOCATION
1500 PPPI_REQUESTED_VALUE PPPI_STORAGE_LOCATION -
Hi! I am trying to find an app that with track everything that is done on my phone with times and dates? im not really woried about call usage and texts sent I need it to view what has been done - for example:
Messages received
Messages deleted
Facebook viewed
Messages viewed
Internet viewed and what?
I just have an issue with someone using my phone - I used to track this through double clicking the home button and roughly knowing in what order I had been on things but they have sussed this one!
Thank you!!No way to do that on a non-jailbroken iPhone. Why don't you just passcode protect your phone? That way no one but you can use it...unless they know your passcode.
-
Issue with extraction of data to Delta Queue
Hi All,
Background:- One LO Data source each from Application 8, 11 and 12 was active in LBWE. Update method was specified as Queued Delta. However this Data source was not utilized to pull any data to any of the Global BI Systems. These data sources did not exist in RSA7. There was a business requirement that these Data sources were to be enhanced, along with this other Data sources under these applications were also required to be enhanced. There were entries in LBWQ which used to get dumped out at regular interval by running the SAP Standard Collector jobs. Since no Delta was initialized for these extractors, no entries were passed on to RSA7.
Problem:- We did not clear the entries or took a downtime before sending transports and now the collector job is dumping saying the structures have changed, which is correct. I believe we wonu2019t require any data sitting in LBWQ as none of the extractors had any entry in RSA7. This problem is happening only in our Production system and we did not face this problem in any other system even though there were entries existing in LBWQ.
What is the solution to fix this? Is the only option now is to delete the Queue from LBWQ and then run the collector job or is there any other way and will that fix the problem?Hi Victor,
As u said that u were not using the DS for Application 8,11 and 12.. in this case I believe that u dont have any data in BW as well(Historical data). As u have enhanced these data sources with the new requirement, I hope u must have changed the structures in BW side as well to load the data to the newly added fields.
So in ur case u need to replicate the DS in BW and then activate the Transfer structure for all of them.
And then flushout the LBWQ for all those 3 applications and then take the setup tables fill for the same (but this requires the down time in prod to make sure that u wont loose any records).
Before setup check SM13 whether u have any blocked entries for all these entries if so then u can delete them as well before taking the setup.
Once the setup is done then u can take Init without data transfer and then take repair full loads in BW for the targets.(Activate ur V3 once the init- without data transfer took place for the regular deltas) .
Thanks
Assign points if this helps -
Find out the time sheet data entry fields
hi
this is satish,
i inserted the time sheet values in the time sheet data entry view. now the my problem is where these field values store in which tables.
thanks for allHi:
I need to transfer CATS data to FICO. I found out about transaction CAT7.
At the moment, I have 2 issues:
1) My CATSDB data have status "30". However, there is no corresponding entries in CATSCO. Could you tell me what I need to do to ensure that CATSCO has values?
2) My FICO system is running on 4.6C whereas my HR system is running on ECC6.0. Can CAT7 still works?
I appreciate your response.
Thanks,
Ash -
Transferring Time Sheet Data to Controlling/Financial Module
All:
I have an issue I am entering data via CAT2 and have supplied a receiver cost center, using wage type MI10 and entered times 8 hours per day. I have entered salary data into the basic pay via Personnel Management. I have approved the time sheet data but it appears that it is only relevant for transfer to the HR module and not the CO module. Any help would be greatly appreciated. I am attempting to use these modules to record actual hours worked and associated wage rates then post entries to CO for reporting.
Thanks,
JeremySorry I wasn't clear it appears that it is not available for transfer to controlling. It appears it is only building the data structures for transfer in HR and not CO. I get the message "No data for transfer" it appears once I approve the time sheet data it creates intermediate structures/table for transferring to other modules and is only creating the structure/table for HR. I can successfully transfer data to HR but not CO. What data on the time sheet entry triggers it to build the CO structures/tables.
Thanks,
Jeremy -
0ca_ts_is_1(Time sheet data (Approved) No of records are wrong
Hi Experts,
we need to extract the data from 0ca_ts_is_1(Time sheet data (Approved) but the problem is the no of records in the table CATSDB with status is 849 but in RSA3 (0ca_ts_is_1) there are 500 records only.
could you kindly suggest me any OSS notes please.
Thanks,
Shaliny. MHi Shaliny,
in BW you will see only the time sheet data wich are ok, that means , which have been confirmed (Approve?)
I hope this helps you -
Employee Search in MSS Approve Time Sheet Data
Employee Search in MSS Approve Time Sheet Data (Net Weaver Portal 2004s)
In MSS we need upper level managers to be able to approve time for employees who reside in lower level org units and are not the managers direct reports. This is usually the case when the chief the employees do report to directly is absent.
In the MSS Team view the links General Information, Compensation Information and Personnel Development have an Employee Search iView with a dropdown containing options for Direct Reports, Employees from Organizational Structure, Employees from Organizational Units and Employee Search. We have been told that in previous versions of MSS that functionality existed in the Approve Time Sheet Data iView as well which would appear to solve our problem.
Is this functionality available in Approve Time Sheet Data and if so how is it configured? Or is there another way (other than manipulating the org structure) for managers to view non-direct reports and approve their time?Hi Mani,
It is a good thing you have found this post, as it demonstrates that you put in some effort to search for similar posts to your problem.
However, if the post you found is like 3 years old and there are no replies, chances are the guy did not find a solution or isn't visiting here anymore. So it might be a good idea to raise a new post, to increase you chances of getting some answers. -
I have updated my iPad mini to iOS 7.1.1 recently. After updated, it went wrong with time and date even I tried to restart it or set manual time/date or set auto time/date. How can I solve this problem?
Hello Phirum OL,
Here is an article that will help you adjust the date and time settings on your iPad:
iOS: Troubleshooting issues with date and time
http://support.apple.com/kb/ts3920
Learn the steps to take if your device has any of the following issues with the date and time.
Incorrect date or time
Wrong time zone being set automatically
Issues related to automatically switching with daylight savings time
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
Hi,
I am having issue with Ord Start Date.
When i create XYZ Asset now when i do the acquasation for that new asset. Example: Using FB01 i enter todays date and i do the posting.
Now when i go to DEP Area TAB for the DEP Key (M200) - The Ord Dep Start Date is 15 Dec 2010.
For this DEP Key Period Control Methods (T code - AFAMP) - Acquisation Entered is ( 6 that is - at the start of year) and the Period Control is ( T code - OAVS) (4 that is - First year convention at half year start date).
Our client is using the fiscal year as 1 June 2010 to 31 May 2011.
So when i do acquistion for the asset as per the period contol the Ord Dep Start Date should be 1 Dec 2010, but here it is talking 15 Dec 2010.
Why is system talking 15 days more.
Regards.Hi
Which Fiscal year variant are you using??
Did you maintain it in OAVH? Copy the existing entry in OAVH for K4 to your Fisc Yr var and try again
And also, 04 does not figure for Acquisitions in AFAMP under 0004.... Whatever you specify in OAVH must also be a part of AFAMP
Regards
Ajay M
Edited by: Ajay Maheshwari on Oct 28, 2010 2:31 PM -
Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013
Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013
Newform.aspx of list:-
Custom List is not saving data sometimes in the new form after 15 minutes and only blank entry record got created without saving data, even though some columns are mandatory fields?Hello dcakumar,
Sounds like a strang issue. If you can reproduce this can you see some errors in the ULS logs?
- Dennis | Netherlands | Blog |
Twitter
Maybe you are looking for
-
I face to 2 problems with my app after reserving app name for published app. 1. IAP I published my WP8 apps ~1 year ago (we didn't have to reserve app name at this time). Recently, I reserved an app name (same with published app) and published app. A
-
Hi there, When syncing by audio, what's happening when I offset the audio frames from the video frames? I was looking around for official documentation on this, but couldn't find any. I'm thrilled that the new Premiere Pro CC (7.0.0) can sync by audi
-
I'm looking to shoot something and here's a selection of cameras I'm considering: Panasonic AG HVX200, AG DVX 100B, or the AG DVC 30. I'm not looking to shoot anything real fancy looking, but probably Mini DV. Definately not HD, since I actually want
-
Hi, I have two OBIEE 11g installation, A and B, and I would like to migrate the environment A from installation A to B. I have copied the catalog and repository from A to B and I loaded them using EM. Then I refreshed the GUID's by editing the files
-
Security sandbox and accessing multiple servers
I own the domain kitfox.com, and need to have my WebStart application access servlets on my host server. However, I would like to distribute my servlets across many servers so that the load is balanced. I would also like to do this while keeping ever