Issue with Trackpad in my New BB CURVE 9320

I am having problem in scroling down my Trackpad with my BB 9320 Curve. it is a month old with 7.1 OS what could be the problem

Hi BB_DUDE,
Welcome to the Community,
Whenever you feel or see any unusual in your device the first advice is Perform a Battery Pull Restart like this While Device is Powered On remove the Battery wait for a min. then re-insert it back wait till the device take a long Reboot.and also I have a look at this Article of K.B How to maximize battery life and free memory on the BlackBerry smartphone go through it cause applications running in background may also make your device sluggish
Good Luck
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Similar Messages

Issues with Oracle in a new location.

Hello -
I recently had to change the computer name of a Windows 2003 SP2 test server. Among other software installed was Oracle 10g r2. There were issues with Oracle in its new location where it was trying to reference the old computer name.
I assumed that all I would have to do to correct the issue was to search all of Oracle’s .ORA files and replace the old server name with the new one. (Plus, of course, changing the Windows Host file entry).
But I’m finding that Oracle on Windows apparently has many other references to the original computer name. For example, there are subdirectories in the Oracle Home directory tree structure where the directories themselves contain the old computer name. (I’ve attached a screenshot of a file search off the Oracle directory tree for “BRI2KSRV” which is the test server’s old name. “Bri2ksrv.jax.fnfis.com” was the server’s old fully qualified name. ORCL is/was the default instance name).
For example, these directories were found:
..\oracle\product\10.2.0\db_1\bri2ksrv.jax.fnfis.com_orcl
..\oracle\product\10.2.0\db_1\log\bri2ksrv
..\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_bri2ksrv.jax.fnfis.com_orcl
What are the recommended steps when changing the Windows computer name (and thus the fully qualified network references) on a Windows 2003 Server which has a functioning Oracle 10g R2 instance?
Thanks!

These directory you mentioned are EM control directory. You need to reconfigure your EM with new server name.
If you are using server name instead of IP address in listener.ora and tnsnames.ora you need to change these as well.

Issue with reinstalling a brand new mac pro

I was recomended to reinstall the leopard since I had some issues with my new 27"
cinema display.( there is an update for the cinema display and my mac did not allow me to updat it so apple care person told me to reinstall the leopard.
After 15 minutes in gto the reinstalling the mac pro has stopped responding and i have a white background with apple logo in the center of the screen fro the last 2 hours.
Any recomindations until the apple care is back on the line.

Make sure you have the display usb cable connected as some of the functionalities
are addressed through the usb cable.

Issue with : Stateful BSP Applications: New State Management Option

Reference:weblog by Thomas Jung - /people/thomas.jung3/blog/2004/11/09/updated-stateful-bsp-applications-new-state-management-option
I see a comment by one user to send the complete code... I am not sure what else can be sent - try it out rather than getting spoon-fed. - getting offline - sorry...
I had two issues with this ITSM way of session handling.
First - if you are using an SP42 environment, check CL_BSP_RUNTIME=>ON_SESSION_CMD() to see if CANCEL is defined as an option. If not make sure that you use &sap-sessioncmd=CLOSE" instead of the &sap-sessioncmd=CANCEL" . If CANCEL is not defined , it will give you shortdumps...
Second - when I closed the window, the session was not terminated. I used onbeforeUnLoad="exitBSPApplication(); instead of onUnLoad="exitBSPApplication(); and it worked fine. Not sure if it has any other issues.
But now I am facing a new issue... all but one application is not ending... I have no clue on why this is happening.. I am still checking..
Thanks Thomas, you are the best, as always...

Thanks for checking the code in your system.
After some investigation, I found the behavior as explained below.
If the actual url has any fields passed as parameters, e.g.. /default.htm?var1=a&var2=2 ...
- if I use CANCEL as the option, a shortdump is created and the session is not closed. if I use CLOSE, Session is terminated and no shortdump happens.
If the actual url does not have any parameters, e.g.. /default.htm ...
- CANCEL does the work, but CLOSE does not exit the session.
In my applications I used request->get_form_fields to see if there are any parameters, and if there are, then I use CLOSE as the option and else, I use CANCEL. So now, the session
management works beautifully...
There is a good chance that I am doing something wrong here too.

Connection with BMW car Bluetooth Problem. Curve 9320

I have a problem with the connection with my BMW car (series 3 model 2012). I have a Curve 9320 BlackBerry with 7.1 bundle OS (V7.1.0.907, platform 9.49.0.98).
When I connect the Blackberry to the BMW bluetooth everything works fine. After this though the Blackberry cannot open anymore the files attached to the e-mails. If I reset the device by disconnecting the bactery and restart it soon after that the Black berry can open the files attached to the e-mail. It work fine until it connects again to the bluetooth of the BMW. So far this is the only problem I found, the other functions work just fine.
Someone can help me?
Thanks

Yup, same issue.
I have to disconnect the lead from the phone before answering a call. Somewhat hard sometimes when driving...
Current Devices: PlayBook 16GB, 64GB. Z10, Q10.
Past Devices: Bold 9000, 9700, 9790, 9900. Torch 9800, 9810.

New Blackberry Curve 9320, can't activate radio data

Hi all,
I have just got a Blackberry Curve 9320 and was trying to set up my business email but couldn't and found the problem is I can't seem to activate the radio data.
I have tried a 'battery pull' and various other fixes used but nothing has worked.
Does anyone have any ideas as to why it will not activate?
Carl

Hello cfenton ,
Welcome to the Community,
First make sure that you have BIS , then please look at this article of KB how to associate a email address with
Blackberry Internet Service account. How to associate a email address with a blackberry service account
I hope it will help.
Good Luck
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Magic Trackpad issues with opening tabs into new windows.

I used to be able to double tap and drag a tab out of the row of tabs in Chrome and put it into it's own windows. Now the double tap and drag doesn't work. I have to depress the trackpad with my thumb while tapping on the tab and then drag it into a new window. Tried unchecking and rechecking all the boxes in Trackpad preferences, but that didn't work. Anybody have any other thoughts? Could upgrade to 10.8.4 have done this or something? (Running Mountain Lion on iMac mid 2010).

I think I just found the answer although how that changed I have no idea. Under System Preferences/Accessability/Trackpad Options, I had to enable dragging. Hope that helps someone if it ever happens to them.

SLI issue with N660Ti-2GD5/OC (new bios request)

Hi,
It started all with issue regarding SLI performance under F1 2012 game.
When SLI is enable I can't get more then 30FPS average. I try changing SLI rendering mode with no luck... nothing change.
I noticed that when SLI is enable I only get 25% GPU usage per card and my 3D GPU clock is not reaching MSI declare speed.
When SLI disable everything is working normally. I get 58FPS average, 95-100% GPU usage and my 3D GPU clock is working at MSI declare speed (I think it is 1020MHz).
So I suppose that this is negative SLI scaling...
I was doing some testing and SLI (I have enable show SLI visual indicator) doesn't work properly in any game that I have install on my pc (F1 2010, BF3, BC2 and NFS Shift).
I have same issue in all games: low gpu usage, 3d clocks doesn't reach declare speed (with three, two or only one monitor connected).
So next I installed Heaven Benchmark 4.0 and started testing and for some unexplainable reason SLI is working normally.
After that I started games again but no GO ... again in games SLI is not working correctly.
I was thinking that maybe my SLI profile are not working right... so I decided to change driver, I try 320.14 and 314.22 nothing change - SLI not working correctly.
Then I download nvida inspector and try to define SLI profile for those games - nothing change - SLI still not working correctly.
I even try to disable first card through device manager so I can test the second card and vice verse, separately both cards are working normally.
So only in Haven benchmark 4.0 SLI is working correctly I have GPU usage of 95% and declare speed for 3D clocks.
I have Win8x64 (fresh install), nothing overclocked, I enable Prefer maximum performance in nVidia drivers and disable V-sync. CPU Fx-8350, Asus sabertooth fx990 rev.2 (latest bios), 1200W chieftec power supply and everything is properly connected.
Is there a new bios release for my cards? Maybe this could solve my issue? And who can supply me with new bios?
Sorry for long post but I am really desperate... any thoughts or maybe solution.
Regards

Well my monitor doesn't support more then 1680x1050, but still if this is the case I think that ATI is the way to go... my humble opinion.
So now I can sell my second card because SLI doesn't work... I am totally depressed.
Ok but can someone please,please supply me with new firmware for the cards? I just one to try it just to know that I tried everything before I go and sell those cards and go for ATI solution.
Regards

Issue with af:commandMenuItem exiting new window...

Hi everybody!
Testers are reporting an issue that I have not yet successfully reproduced.
This app was produced in JDeveloper 10.1.3.3.0 using ADF BC/JSF.
The issue is very simply described. I am jsp-including an af:menuButtons component which has af:commandMenuItem's inside of it. One of these is a help button which has only the onclick event defined as follows:
window.open('../Help.html##{requestScope.currentPageFileName}', 'helpWin', 'width=1000,height=350,resizable=1,scrollbars=1').document.title = 'Application Help'
The tester complaint was that when they clicked on the commandMenuItem help link, then immediatley exited this help window, before it had finished rendering (presumably using the red X in the upper right corner, or alt-F4), the adf application would hang. No navigation could occur after that pre-mature exit.
Has anybody seen anything like this?
Thanks in advance for your time.

Michael,
can you try a goLink to open the new window instead of the onClick event ? This way you avoid that your code conflicts with the internal framework JavaScript. In the past I recognized that JavaScript added to the on... events may conflict with the framework codes. The work around I found in this situations are
- use a goLink
- register the on... event dynamically during page load using document.getElementById()
I would try the goLink first because it does exactly what you want without having to hack in JavaScript
Frank

Having issues with gotoURL and open new window

I am having trouble opening a new browser window with the gotoURL
script. This is the current FormCalc that I am using.
$host.gotoURL("http://www.google.com",1)
I am wondering if this is working as expected? My PDF does not open
into a new window in any browser or Adobe Reader. Is anybody aware of
this problem? I have hyperlinks on my form that I am trying to get to
open in a new window using FormCalc scripts.
Appreciate any help. I am trying find out if this is bug, or is working
as expected, or if there is another script to accomplish this?
Thanks,
Rebecca

There are lots of customer applications that are based on Windows RAC. And as mentioned above, it is very well supported by Oracle.
However, because of the security vulnerabilities of Windows, I've observed that most of the financial institutions and listed companies opt for unix based servers for all high profile applications and run only low to medium risk application on Windows.
Regarding maintanence issues, I guess it's going to be pretty much the same; there shall always be lots of bugs, lots of patches and updates just like an yother software; doesn't really matter if you are on Unix or Windows systems. As long as you purchase support, it's all good.
It's pretty much same concern regarding Grid Control on windows.
Cheers.

Is anyone having issues with trackpad after install lion?

Since I have installed Lion(clean install from flashdrive) my track pad makes me "click" and hold to move windows around. I use to be able to just "tap" without fully compressing the trackpad. Is anyone else having this issue?
Thanks

I've noticed peculiarities with the trackpad on both Mac laptops as well as the Magic Trackpad on our home iMac since updating to Lion.
The biggest one is random right-click only where it seems the touchpad gets stuck in right-click mode. The only way to stop it is to "tap" rather than click and it seems to fix it. Otherwise, I've not had problems with dragging or anything.
What you may try is turning the option off/on again in Trackpad under System Preferences that is giving you problems. I had this problem on our home iMac with the Magic Trackpad with three-finger drag. Works fine now.

My new iPhone 5 just blacked out and won't come on. Does anyone know if I will have an issue with Verizon getting a new phone?

MMy new iPhone 5 just blacked out and won't come on. Does anyone know if I will have an issue getting a new phone from Verizon.? I can't even call because I don't have a phone!

Ebony,
Let's see if we can't get this phone working for you! What exactly is happening with the device? Is the screen just out and you can hear that it will still ring, or is the phone completely dead? Please elaborate more on what you are experiencing.
SandyS_VZW
Follow us on Twitter @VZWSupport

Issues with 'stuck' keys on new iMac (2011) with Aluminium KB

Hi All,
I've got a weird issue which I've seen on a few other forums... with no real fix. I've got a new 27" iMac (2011) and I have been using it happily for a few weeks. In the last two days, my keyboard has been going a little crazy.
Firstly I thought it funny that the 'option' key wouldn't work during bootup and later I discovered that once booted in OSX, i'd have 'sticky' keys or keys not registering when pressed.
When I reset the keyboard, everything works fine again.
Its becoming a problem as I cannot register an of the bootup options anymore and have reverted to using an old Remote to access my boot volume screen (holding the Menu button).
Has anyone seen this before and if so, what is the fix other than taking the keyboard back to the Mac store?
Thanks again,
Con

Hi Cabakroll,
Yeah, I've been doing regular updates (when available). I have actually figured out the issue... its a very weird fix mind you. I went back to see what changed the other day, when I first notice the issue. I recalled that I swapped out the batteries (the ones that came with it were running low for some reason), with rechargables.
Since then, the keyboard has been going crazy. I swapped the rechargables with normal batteries and bingo, problem fixed. :S
Thanks for getting back to me though.
Hopefully this helps others too.

Potential Driver Issues with OS Install on New Hard Drive?

I want to upgrade my laptop's hardrive, but my laptop did not come with recovery discs. I did purchase a full copy of Windows 7 Professional, but I have been saving it...for when all else fails, I suppose. Whether I am able to reinstall Win 7 Home or whether I have to install Win 7 Pro, how can I be sure to reinstall all the necessary HP drivers (e.g. trackpad, cool sense, beats audio, etc.) for my machine? Is it best to download the drivers prior to installing the new hard drive and have them ready on a flash drive; or is there an easier method? Thanks.
This question was solved.
View Solution.

Yes that is a very good question.
It's very much advised you do a HDD error check, hard drive test from BIOS and SFC scan lastly.
You can then undergo a disk cleanup and disk defragmentation of the HDD & then proceed with backing up or cloning tools.
I do back up regularly into my 2TB external drive using Macrium reflect, AOMEI back upper and also have all my latest drivers downloaded and copied to another USB along with another bootable USB with Windows OS ISO.
Note: I've already created my recovery media after I setup the laptop first time for additional safety.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Focusrite Scarlett 2i2 clapping and crackling issues with Logic Pro x new iMac 27"

Hi, I have just purchased a brand new iMac and downloaded Logic Pro x, I also purchased the Focusrite Scarlett 2i2 interface. I have downloaded the drivers from the focusrite website and everything is set up, when I plug in guitar or mic I get really bad clapping and crackling to the point where the sound cuts out altogether. I have changed buffer size and sample rates and everything else I can think of but nothing seems to fix the problem. I also deleted the 2i2 drivers and logic and reinstalled them both but still have the same issue, when I record using the iMac built in mic everything is fine so it's deffinately something to do with the interface. I am waiting to hear back from Focusrite tech help. Does anyone else have this problem? Any help would be appreciated.

I'm having a similar issue which might indicate that the problem is not your interface.
Yesterday I migrated all my stuff from my 2009 iMac to a brand new iMac 27", and when I did a quick test to play back some old projects in Logic there was loads of annoying clicks and pops. My interface is a Roland Octa-Capture.
I also noticed some weird CPU spikes from time to time, which I never had on my older, much less powerful iMac...

Issue with Trackpad in my New BB CURVE 9320

Similar Messages

Maybe you are looking for