Issue with two SID installation in a Single Windows 2003 Server.

Hi,
When I install second installation in a same single machine where already One SID installed, first one is goes down.
But Database is working fine.....
Disp+Work.exe status first it goes to Yellow then goes down..
Kernal of First installation is already updated.
Disp+Work.exe ---> Develeoper_Trc detail is following..
trc file: "dev_disp", trc level: 1, release: "700"
sysno      01
sid        TRN
systemid   562 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    159
intno      20050900
make:      multithreaded, Unicode, 64 bit, optimized
pid        6360
Thu Oct 30 16:22:26 2008
kernel runs with dp version 237000(ext=110000) (@(#) DPLIB-INT-VERSION-237000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 6360) [dpxxdisp.c   1254]
     shared lib "dw_xml.dll" version 159 successfully loaded
     shared lib "dw_xtc.dll" version 159 successfully loaded
     shared lib "dw_stl.dll" version 159 successfully loaded
     shared lib "dw_gui.dll" version 159 successfully loaded
     shared lib "dw_mdm.dll" version 159 successfully loaded
rdisp/softcancel_sequence :  -> 0,5,-1
use internal message server connection to port 3901
Thu Oct 30 16:22:31 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5403]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >ides_TRN_01                             <
DpShMCreate: sizeof(wp_adm)          21008     (1616)
DpShMCreate: sizeof(tm_adm)          5912624     (29416)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm)          552080     (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1864)
DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000EF60050, size: 6604928)
DpShMCreate: allocated sys_adm at 000000000EF60050
DpShMCreate: allocated wp_adm at 000000000EF62150
DpShMCreate: allocated tm_adm_list at 000000000EF67360
DpShMCreate: allocated tm_adm at 000000000EF673C0
DpShMCreate: allocated wp_ca_adm at 000000000F50ABF0
DpShMCreate: allocated appc_ca_adm at 000000000F5109B0
DpShMCreate: allocated comm_adm at 000000000F5128F0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F599580
DpShMCreate: allocated gw_adm at 000000000F599600
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F599630
DpShMCreate: allocated wall_adm at 000000000F599640
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value :  -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
J2EE server info
  start = TRUE
  state = STARTED
  pid = 6764
  argv[0] = E:\usr\sap\TRN\DVEBMGS01\exe\jcontrol.EXE
  argv[1] = E:\usr\sap\TRN\DVEBMGS01\exe\jcontrol.EXE
  argv[2] = pf=E:\usr\sap\TRN\SYS\profile\TRN_DVEBMGS01_ides
  argv[3] = -DSAPSTART=1
  argv[4] = -DCONNECT_PORT=64999
  argv[5] = -DSAPSYSTEM=01
  argv[6] = -DSAPSYSTEMNAME=TRN
  argv[7] = -DSAPMYNAME=ides_TRN_01
  argv[8] = -DSAPPROFILE=E:\usr\sap\TRN\SYS\profile\TRN_DVEBMGS01_ides
  argv[9] = -DFRFC_FALLBACK=ON
  argv[10] = -DFRFC_FALLBACK_HOST=localhost
  start_lazy = 0
  start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1656]
***LOG Q0K=> DpMsAttach, mscon ( ides) [dpxxdisp.c   11937]
DpStartStopMsg: send start message (myname is >ides_TRN_01                             <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 159
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Thu Oct 30 16:22:36 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 5 / sock 292
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4516) [nixxi.cpp    4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=6764)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Oct 30 16:23:11 2008
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:21 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Thu Oct 30 10:53:21 2008
========================
No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
0 DIA     6800 Ended         no      1   0        0                                                                         
1 DIA     6796 Ended         no      1   0        0                                                                         
2 DIA     6760 Ended         no      1   0        0                                                                         
3 DIA     6772 Ended         no      1   0        0                                                                         
4 DIA     6896 Ended         no      1   0        0                                                                         
5 DIA     6848 Ended         no      1   0        0                                                                         
6 UPD     6860 Ended         no      1   0        0                                                                         
7 ENQ     6784 Ended         no      1   0        0                                                                         
8 BTC     6864 Ended         no      1   0        0                                                                         
9 BTC     6892 Ended         no      1   0        0                                                                         
10 BTC     6924 Ended         no      1   0        0                                                                         
11 SPO     6928 Ended         no      1   0        0                                                                         
12 UP2     6908 Ended         no      1   0        0                                                                         
Dispatcher Queue Statistics               Thu Oct 30 10:53:21 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
6
6
2000
6
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          13
wake_evt_udp_now     0
wake events           total     8,  udp     6 ( 75%),  shm     2 ( 25%)
since last update     total     8,  udp     6 ( 75%),  shm     2 ( 25%)
Dump of tm_adm structure:               Thu Oct 30 10:53:21 2008
=========================
Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
RM-T13, U14,                 , gokul_ggn, 16:22:40, M0, W-1,     , 1/0
Workprocess Comm. Area Blocks               Thu Oct 30 10:53:21 2008
=============================
Slots: 300, Used: 2, Max: 1
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
1
DISPATCHER
-1
WPCAAD001
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:26 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >ides_TRN_01                             < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (6752) (SOFT_KILL)
Stop icman
killing process (6700) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 13
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/13
LOCK WP ca_blk 2
return errno (-17) to T13
errormsg without overhead: take mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
try to send 14 to M0
NiBufSend starting
NiIWrite: hdl 5 sent data (wrt=14,pac=1,MESG_IO)
REL WP ca_blk 2
set status of T13 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 5 in set0
SiSelNSet: set events of sock 292 to: ---
NiBufISelRemove: remove hdl 5 from set0
SiSelNRemove: removed sock 292 (pos=2)
SiSelNRemove: removed sock 292
NiSelIRemove: removed hdl 5
DpDelSocketInfo: del info for socket 5 (type=3)
NiICloseHandle: shutdown and close hdl 5 / sock 292
NiBufIClose: clear extension for hdl 5
dp_tm_adm[13].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1225364011/669000
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 13
DpListInsert: insert elem 13 into tmadm_free_list (at begin)
DpListInsert: 188 elems in tmadm_free_list
DpListRemove: remove elem 13 from tmadm_inuse_list
DpListRemove: 13 elems in tmadm_inuse_list
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives  (PID:6752  HANDLE:404)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:27 2008
NiISelect: TIMEOUT occured (1000ms)
Thu Oct 30 16:23:28 2008
[DpProcDied] Process died  (PID:6752  HANDLE:404)
wait for end of icman
[DpProcDied] Process lives  (PID:6700  HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:29 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:6700  HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:30 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:6700  HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:31 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:6700  HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:32 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:6700  HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:33 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:6700  HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:34 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:6700  HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:35 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:6700  HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:36 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:6700  HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:37 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:6700  HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:38 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died  (PID:6700  HANDLE:412)
[DpProcDied] Process died  (PID:6764  HANDLE:388)
DpStartStopMsg: send stop message (myname is >ides_TRN_01                             <)
NiIMyHostName: hostname = 'ides'
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER                             
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Thu Oct 30 16:23:39 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12283]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 332 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 332 (pos=3)
SiSelNRemove: removed sock 332
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/13
LOCK WP ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 16)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 332
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 6360) [dpxxdisp.c   10484]
Good Bye .....
Please help out.
Thanks in Advance.
Regards,
Gokul Cahndola

Yes Finally I Got the solution.
please check
>r3trans -d   To Check Conectivity between Apps and DB Server.
If 000 then its OK- mean connectivity is OK, in this case all work.
when I was installing Second system then tnsname.ora and listner file was creating and privios system entry was removed.  DUE to that reasion First one goes down.
Solution:-  Both system entry should be Listner and tnsname file. Then Both server will work.
**********THANKS TO "AC"**************
Regards,
Gokul Chandola

Similar Messages

  • Performance issue with two unbanalnced hierarchies in a single report

    Hi All
    We are facing the performance issue with one of the report which houses two unbalanced hierarchies (having 18 levels) - skipped & ragged. Basically its a part of OBIAPPS financila analytics .
    The query is below :
    Could anyone let me know how to improve the performane. Any parameter that should be looked at while using unbalanced hierarchies.
    WITH SAWITH0
    AS ( SELECT SUM (T91707.OTHER_LOC_AMT) AS c1,
    MAX (T314768.HIER2_CODE) AS c2,
    MAX (T314768.HIER3_CODE) AS c3,
    MAX (T314768.HIER4_CODE) AS c4,
    MAX (T314768.HIER5_CODE) AS c5,
    MAX (T314768.HIER6_CODE) AS c6,
    MAX (T314768.HIER7_CODE) AS c7,
    MAX (T314768.HIER8_CODE) AS c8,
    MAX (T314768.HIER9_CODE) AS c9,
    MAX (T314768.HIER10_CODE) AS c10,
    MAX (T314768.HIER11_CODE) AS c11,
    MAX (T314768.HIER12_CODE) AS c12,
    MAX (T314768.HIER13_CODE) AS c13,
    MAX (T314768.HIER14_CODE) AS c14,
    MAX (T314768.HIER15_CODE) AS c15,
    MAX (T314768.HIER16_CODE) AS c16,
    MAX (T314768.HIER17_CODE) AS c17,
    MAX (T314768.HIER18_CODE) AS c18,
    MAX (T314768.HIER19_CODE) AS c19,
    MAX (T314768.HIER20_CODE) AS c20,
    T314768.HIER1_NAME AS c21,
    T314768.HIER1_CODE AS c22,
    T314914.HIER1_NAME AS c24,
    T314914.HIER10_NAME AS c25,
    T314914.HIER11_NAME AS c26,
    T314914.HIER12_NAME AS c27,
    T314914.HIER13_NAME AS c28,
    T314914.HIER14_NAME AS c29,
    T314914.HIER15_NAME AS c30,
    T314914.HIER16_NAME AS c31,
    T314914.HIER17_NAME AS c32,
    T314914.HIER18_NAME AS c33,
    T314914.HIER19_NAME AS c34,
    T314914.HIER2_NAME AS c35,
    T314914.HIER20_NAME AS c36,
    T314914.HIER3_NAME AS c37,
    T314914.HIER4_NAME AS c38,
    T314914.HIER5_NAME AS c39,
    T314914.HIER6_NAME AS c40,
    T314914.HIER7_NAME AS c41,
    T314914.HIER8_NAME AS c42,
    T314914.HIER9_NAME AS c43,
    T314914.HIER20_CODE AS c44,
    T314914.HIER1_CODE AS c45,
    T314914.HIER10_CODE AS c46,
    T314914.HIER11_CODE AS c47,
    T314914.HIER12_CODE AS c48,
    T314914.HIER13_CODE AS c49,
    T314914.HIER14_CODE AS c50,
    T314914.HIER15_CODE AS c51,
    T314914.HIER16_CODE AS c52,
    T314914.HIER17_CODE AS c53,
    T314914.HIER18_CODE AS c54,
    T314914.HIER19_CODE AS c55,
    T314914.HIER2_CODE AS c56,
    T314914.HIER3_CODE AS c57,
    T314914.HIER4_CODE AS c58,
    T314914.HIER5_CODE AS c59,
    T314914.HIER6_CODE AS c60,
    T314914.HIER7_CODE AS c61,
    T314914.HIER8_CODE AS c62,
    T314914.HIER9_CODE AS c63
    FROM W_HIERARCHY_D T314768 /* Dim_W_HIERARCHY_D_Segment11 */
    W_GL_SEGMENT_D T315677 /* Dim_W_GL_SEGMENT_D_Segment11 */
    W_HIERARCHY_D T314914 /* Dim_W_HIERARCHY_D_Segment13 */
    W_GL_SEGMENT_D T315731 /* Dim_W_GL_SEGMENT_D_Segment13 */
    W_GL_ACCOUNT_D T91397 /* Dim_W_GL_ACCOUNT_D */
    W_GL_OTHER_F T91707 /* Fact_W_GL_OTHER_F */
    WHERE ( T91397.ROW_WID = T91707.GL_ACCOUNT_WID
    AND T91397.ACCOUNT_SEG11_CODE = T315677.SEGMENT_VAL_CODE
    AND T91397.ACCOUNT_SEG13_CODE = T315731.SEGMENT_VAL_CODE
    AND T91397.ACCOUNT_SEG11_ATTRIB = T315677.SEGMENT_LOV_ID
    AND T91397.ACCOUNT_SEG13_ATTRIB = T315731.SEGMENT_LOV_ID
    AND T314768.HIER_CODE = T315677.SEGMENT_LOV_ID
    AND T314768.HIER_NAME = T315677.SEGMENT_LOV_NAME
    AND T314768.HIERARCHY_ID = T315677.SEGMENT_VAL_CODE
    AND T314914.HIER_CODE = T315731.SEGMENT_LOV_ID
    AND T314914.HIER_NAME = T315731.SEGMENT_LOV_NAME
    AND T314914.HIERARCHY_ID = T315731.SEGMENT_VAL_CODE
    AND T315677.SEGMENT_LOV_NAME =
    'Responsibility_Centre_Functional'
    AND T315677.SEGMENT_LOV_ID = 1000163
    AND T315731.SEGMENT_LOV_NAME = 'Account_Master'
    AND T315731.SEGMENT_LOV_ID = 1000165
    AND ( T314914.HIER11_CODE IN ('S526002012')
    OR T314914.HIER12_CODE IN ('S000001022')
    OR T314914.HIER11_CODE IS NULL)
    AND (T314914.HIER12_CODE IN ('S000001022')
    OR T314914.HIER12_CODE IS NULL)
    AND ( T314914.HIER8_CODE IN ('S000005160')
    OR T314914.HIER9_CODE IN ('S000000187')
    OR T314914.HIER10_CODE IN ('S526003000')
    OR T314914.HIER11_CODE IN ('S526002012')
    OR T314914.HIER12_CODE IN ('S000001022')
    OR T314914.HIER8_CODE IS NULL)
    AND ( T314914.HIER9_CODE IN ('S000000187')
    OR T314914.HIER10_CODE IN ('S526003000')
    OR T314914.HIER11_CODE IN ('S526002012')
    OR T314914.HIER12_CODE IN ('S000001022')
    OR T314914.HIER9_CODE IS NULL)
    AND ( T314914.HIER10_CODE IN ('S526003000')
    OR T314914.HIER11_CODE IN ('S526002012')
    OR T314914.HIER12_CODE IN ('S000001022')
    OR T314914.HIER10_CODE IS NULL)
    AND ( T314914.HIER1_CODE IN ('ALL_LI')
    OR T314914.HIER2_CODE IN ('S000000001')
    OR T314914.HIER3_CODE IN ('S000005150')
    OR T314914.HIER4_CODE IN ('S000005151')
    OR T314914.HIER5_CODE IN ('S000005153')
    OR T314914.HIER6_CODE IN ('S000005154')
    OR T314914.HIER7_CODE IN ('S000005062')
    OR T314914.HIER8_CODE IN ('S000005160')
    OR T314914.HIER9_CODE IN ('S000000187')
    OR T314914.HIER10_CODE IN ('S526003000')
    OR T314914.HIER11_CODE IN ('S526002012')
    OR T314914.HIER12_CODE IN ('S000001022'))
    AND ( T314914.HIER2_CODE IN ('S000000001')
    OR T314914.HIER3_CODE IN ('S000005150')
    OR T314914.HIER4_CODE IN ('S000005151')
    OR T314914.HIER5_CODE IN ('S000005153')
    OR T314914.HIER6_CODE IN ('S000005154')
    OR T314914.HIER7_CODE IN ('S000005062')
    OR T314914.HIER8_CODE IN ('S000005160')
    OR T314914.HIER9_CODE IN ('S000000187')
    OR T314914.HIER10_CODE IN ('S526003000')
    OR T314914.HIER11_CODE IN ('S526002012')
    OR T314914.HIER12_CODE IN ('S000001022')
    OR T314914.HIER2_CODE IS NULL)
    AND ( T314914.HIER3_CODE IN ('S000005150')
    OR T314914.HIER4_CODE IN ('S000005151')
    OR T314914.HIER5_CODE IN ('S000005153')
    OR T314914.HIER6_CODE IN ('S000005154')
    OR T314914.HIER7_CODE IN ('S000005062')
    OR T314914.HIER8_CODE IN ('S000005160')
    OR T314914.HIER9_CODE IN ('S000000187')
    OR T314914.HIER10_CODE IN ('S526003000')
    OR T314914.HIER11_CODE IN ('S526002012')
    OR T314914.HIER12_CODE IN ('S000001022')
    OR T314914.HIER3_CODE IS NULL)
    AND ( T314914.HIER4_CODE IN ('S000005151')
    OR T314914.HIER5_CODE IN ('S000005153')
    OR T314914.HIER6_CODE IN ('S000005154')
    OR T314914.HIER7_CODE IN ('S000005062')
    OR T314914.HIER8_CODE IN ('S000005160')
    OR T314914.HIER9_CODE IN ('S000000187')
    OR T314914.HIER10_CODE IN ('S526003000')
    OR T314914.HIER11_CODE IN ('S526002012')
    OR T314914.HIER12_CODE IN ('S000001022')
    OR T314914.HIER4_CODE IS NULL)
    AND ( T314914.HIER5_CODE IN ('S000005153')
    OR T314914.HIER6_CODE IN ('S000005154')
    OR T314914.HIER7_CODE IN ('S000005062')
    OR T314914.HIER8_CODE IN ('S000005160')
    OR T314914.HIER9_CODE IN ('S000000187')
    OR T314914.HIER10_CODE IN ('S526003000')
    OR T314914.HIER11_CODE IN ('S526002012')
    OR T314914.HIER12_CODE IN ('S000001022')
    OR T314914.HIER5_CODE IS NULL)
    AND ( T314914.HIER6_CODE IN ('S000005154')
    OR T314914.HIER7_CODE IN ('S000005062')
    OR T314914.HIER8_CODE IN ('S000005160')
    OR T314914.HIER9_CODE IN ('S000000187')
    OR T314914.HIER10_CODE IN ('S526003000')
    OR T314914.HIER11_CODE IN ('S526002012')
    OR T314914.HIER12_CODE IN ('S000001022')
    OR T314914.HIER6_CODE IS NULL)
    AND ( T314914.HIER7_CODE IN ('S000005062')
    OR T314914.HIER8_CODE IN ('S000005160')
    OR T314914.HIER9_CODE IN ('S000000187')
    OR T314914.HIER10_CODE IN ('S526003000')
    OR T314914.HIER11_CODE IN ('S526002012')
    OR T314914.HIER12_CODE IN ('S000001022')
    OR T314914.HIER7_CODE IS NULL)
    AND T314768.HIER1_CODE IS NOT NULL
    AND T314914.HIER20_CODE IS NOT NULL
    AND T314914.HIER13_CODE IS NULL
    AND T314914.HIER14_CODE IS NULL
    AND T314914.HIER15_CODE IS NULL
    AND T314914.HIER16_CODE IS NULL
    AND T314914.HIER17_CODE IS NULL
    AND T314914.HIER18_CODE IS NULL
    AND T314914.HIER19_CODE IS NULL)
    GROUP BY T314768.HIER1_CODE,
    T314768.HIER1_NAME,
    T314914.HIER1_CODE,
    T314914.HIER1_NAME,
    T314914.HIER2_CODE,
    T314914.HIER2_NAME,
    T314914.HIER3_CODE,
    T314914.HIER3_NAME,
    T314914.HIER4_CODE,
    T314914.HIER4_NAME,
    T314914.HIER5_CODE,
    T314914.HIER5_NAME,
    T314914.HIER6_CODE,
    T314914.HIER6_NAME,
    T314914.HIER7_CODE,
    T314914.HIER7_NAME,
    T314914.HIER8_CODE,
    T314914.HIER8_NAME,
    T314914.HIER9_CODE,
    T314914.HIER9_NAME,
    T314914.HIER10_CODE,
    T314914.HIER10_NAME,
    T314914.HIER11_CODE,
    T314914.HIER11_NAME,
    T314914.HIER12_CODE,
    T314914.HIER12_NAME,
    T314914.HIER13_CODE,
    T314914.HIER13_NAME,
    T314914.HIER14_CODE,
    T314914.HIER14_NAME,
    T314914.HIER15_CODE,
    T314914.HIER15_NAME,
    T314914.HIER16_CODE,
    T314914.HIER16_NAME,
    T314914.HIER17_CODE,
    T314914.HIER17_NAME,
    T314914.HIER18_CODE,
    T314914.HIER18_NAME,
    T314914.HIER19_CODE,
    T314914.HIER19_NAME,
    T314914.HIER20_CODE,
    T314914.HIER20_NAME),
    SAWITH1
    AS (SELECT SUM (D1.c1) OVER () AS c1,
    MAX (D1.c2) OVER (PARTITION BY D1.c22) AS c2,
    MAX (D1.c3) OVER (PARTITION BY D1.c22) AS c3,
    MAX (D1.c4) OVER (PARTITION BY D1.c22) AS c4,
    MAX (D1.c5) OVER (PARTITION BY D1.c22) AS c5,
    MAX (D1.c6) OVER (PARTITION BY D1.c22) AS c6,
    MAX (D1.c7) OVER (PARTITION BY D1.c22) AS c7,
    MAX (D1.c8) OVER (PARTITION BY D1.c22) AS c8,
    MAX (D1.c9) OVER (PARTITION BY D1.c22) AS c9,
    MAX (D1.c10) OVER (PARTITION BY D1.c22) AS c10,
    MAX (D1.c11) OVER (PARTITION BY D1.c22) AS c11,
    MAX (D1.c12) OVER (PARTITION BY D1.c22) AS c12,
    MAX (D1.c13) OVER (PARTITION BY D1.c22) AS c13,
    MAX (D1.c14) OVER (PARTITION BY D1.c22) AS c14,
    MAX (D1.c15) OVER (PARTITION BY D1.c22) AS c15,
    MAX (D1.c16) OVER (PARTITION BY D1.c22) AS c16,
    MAX (D1.c17) OVER (PARTITION BY D1.c22) AS c17,
    MAX (D1.c18) OVER (PARTITION BY D1.c22) AS c18,
    MAX (D1.c19) OVER (PARTITION BY D1.c22) AS c19,
    MAX (D1.c20) OVER (PARTITION BY D1.c22) AS c20,
    D1.c21 AS c21,
    D1.c22 AS c22,
    SUM (
    D1.c1)
    OVER (
    PARTITION BY D1.c46,
    D1.c47,
    D1.c48,
    D1.c49,
    D1.c50,
    D1.c51,
    D1.c52,
    D1.c53,
    D1.c54,
    D1.c55,
    D1.c45,
    D1.c44,
    D1.c56,
    D1.c57,
    D1.c58,
    D1.c59,
    D1.c60,
    D1.c61,
    D1.c62,
    D1.c63,
    D1.c22)
    AS c23,
    D1.c24 AS c24,
    D1.c25 AS c25,
    D1.c26 AS c26,
    D1.c27 AS c27,
    D1.c28 AS c28,
    D1.c29 AS c29,
    D1.c30 AS c30,
    D1.c31 AS c31,
    D1.c32 AS c32,
    D1.c33 AS c33,
    D1.c34 AS c34,
    D1.c35 AS c35,
    D1.c36 AS c36,
    D1.c37 AS c37,
    D1.c38 AS c38,
    D1.c39 AS c39,
    D1.c40 AS c40,
    D1.c41 AS c41,
    D1.c42 AS c42,
    D1.c43 AS c43,
    D1.c44 AS c44,
    D1.c45 AS c45,
    D1.c46 AS c46,
    D1.c47 AS c47,
    D1.c48 AS c48,
    D1.c49 AS c49,
    D1.c50 AS c50,
    D1.c51 AS c51,
    D1.c52 AS c52,
    D1.c53 AS c53,
    D1.c54 AS c54,
    D1.c55 AS c55,
    D1.c56 AS c56,
    D1.c57 AS c57,
    D1.c58 AS c58,
    D1.c59 AS c59,
    D1.c60 AS c60,
    D1.c61 AS c61,
    D1.c62 AS c62,
    D1.c63 AS c63
    FROM SAWITH0 D1)
    SELECT DISTINCT
    38 AS c1,
    D1.c24 AS c2,
    D1.c25 AS c3,
    D1.c26 AS c4,
    D1.c27 AS c5,
    D1.c28 AS c6,
    D1.c29 AS c7,
    D1.c30 AS c8,
    D1.c31 AS c9,
    D1.c32 AS c10,
    D1.c33 AS c11,
    D1.c34 AS c12,
    D1.c35 AS c13,
    D1.c36 AS c14,
    D1.c37 AS c15,
    D1.c38 AS c16,
    D1.c39 AS c17,
    D1.c40 AS c18,
    D1.c41 AS c19,
    D1.c42 AS c20,
    D1.c43 AS c21,
    D1.c21 AS c22,
    NULL AS c23,
    NULL AS c24,
    NULL AS c25,
    NULL AS c26,
    NULL AS c27,
    NULL AS c28,
    NULL AS c29,
    NULL AS c30,
    NULL AS c31,
    NULL AS c32,
    NULL AS c33,
    NULL AS c34,
    NULL AS c35,
    NULL AS c36,
    NULL AS c37,
    NULL AS c38,
    NULL AS c39,
    NULL AS c40,
    NULL AS c41,
    D1.c44 AS c42,
    D1.c45 AS c43,
    D1.c46 AS c44,
    D1.c47 AS c45,
    D1.c48 AS c46,
    D1.c49 AS c47,
    D1.c50 AS c48,
    D1.c51 AS c49,
    D1.c52 AS c50,
    D1.c53 AS c51,
    D1.c54 AS c52,
    D1.c55 AS c53,
    D1.c56 AS c54,
    D1.c57 AS c55,
    D1.c58 AS c56,
    D1.c59 AS c57,
    D1.c60 AS c58,
    D1.c61 AS c59,
    D1.c62 AS c60,
    D1.c63 AS c61,
    NULL AS c62,
    D1.c22 AS c63,
    NULL AS c64,
    NULL AS c65,
    NULL AS c66,
    NULL AS c67,
    NULL AS c68,
    NULL AS c69,
    NULL AS c70,
    NULL AS c71,
    NULL AS c72,
    NULL AS c73,
    NULL AS c74,
    NULL AS c75,
    NULL AS c76,
    NULL AS c77,
    NULL AS c78,
    NULL AS c79,
    NULL AS c80,
    NULL AS c81,
    D1.c23 AS c82,
    CASE WHEN 1 = 1 THEN 1 ELSE 0 END AS c83,
    CASE
    WHEN D1.c2 IS NULL
    AND D1.c3 IS NULL
    AND D1.c4 IS NULL
    AND D1.c5 IS NULL
    AND D1.c6 IS NULL
    AND D1.c7 IS NULL
    AND D1.c8 IS NULL
    AND D1.c9 IS NULL
    AND D1.c10 IS NULL
    AND D1.c11 IS NULL
    AND D1.c12 IS NULL
    AND D1.c13 IS NULL
    AND D1.c14 IS NULL
    AND D1.c15 IS NULL
    AND D1.c16 IS NULL
    AND D1.c17 IS NULL
    AND D1.c18 IS NULL
    AND D1.c19 IS NULL
    AND D1.c20 IS NULL
    THEN
    1
    ELSE
    0
    END
    AS c84
    FROM SAWITH1 D1
    WHERE ( D1.c44 IS NOT NULL
    AND D1.c50 IS NULL
    AND D1.c49 IS NULL
    AND D1.c22 IS NOT NULL
    AND D1.c51 IS NULL
    AND D1.c52 IS NULL
    AND D1.c53 IS NULL
    AND D1.c54 IS NULL
    AND D1.c55 IS NULL)
    /* Formatted on 12/17/2012 7:49:44 PM (QP5 v5.139.911.3011) */
    WITH OBICOMMON0
    AS (SELECT T156337.ROW_WID AS c2,
    T156337.MCAL_PERIOD_WID AS c3,
    ROW_NUMBER ()
    OVER (PARTITION BY T156337.MCAL_PERIOD_WID
    ORDER BY T156337.MCAL_PERIOD_WID DESC)
    AS c4,
    T156337.MCAL_PERIOD_NAME AS c5,
    T156337.MCAL_PER_NAME_YEAR AS c6
    FROM W_MCAL_DAY_D T156337 /* Dim_W_MCAL_DAY_D_Fiscal_Day */
    WHERE (T156337.MCAL_CAL_NAME = 'Accounting')),
    SAWITH0
    AS (SELECT CASE
    WHEN CASE D1.c4 WHEN 1 THEN D1.c2 ELSE NULL END
    IS NOT NULL
    THEN
    RANK ()
    OVER (
    ORDER BY
    CASE D1.c4 WHEN 1 THEN D1.c2 ELSE NULL END ASC NULLS LAST)
    END
    AS c1,
    D1.c2 AS c2,
    D1.c3 AS c3
    FROM OBICOMMON0 D1),
    SAWITH1
    AS (SELECT DISTINCT
    MIN (D1.c1) OVER (PARTITION BY D1.c3) AS c1, D1.c2 AS c2
    FROM SAWITH0 D1),
    SAWITH2
    AS (SELECT CASE
    WHEN CASE D1.c4 WHEN 1 THEN D1.c2 ELSE NULL END
    IS NOT NULL
    THEN
    RANK ()
    OVER (
    ORDER BY
    CASE D1.c4 WHEN 1 THEN D1.c2 ELSE NULL END ASC NULLS LAST)
    END
    AS c1,
    D1.c3 AS c2,
    D1.c5 AS c3,
    D1.c6 AS c4
    FROM OBICOMMON0 D1),
    SAWITH3 AS (SELECT DISTINCT MIN (D1.c1) OVER (PARTITION BY D1.c2) AS c1,
    D1.c2 AS c2,
    D1.c3 AS c3,
    D1.c4 AS c4
    FROM SAWITH2 D1),
    SAWITH4
    AS ( SELECT SUM (T91707.TD_OTHER_REP_AMT) AS c1,
    T314914.HIER1_NAME AS c2,
    D2.c3 AS c3,
    T314914.HIER1_CODE AS c4,
    D2.c2 AS c5
    FROM W_HIERARCHY_D T314914 /* Dim_W_HIERARCHY_D_Segment13 */
    W_GL_SEGMENT_D T315731 /* Dim_W_GL_SEGMENT_D_Segment13 */
    W_GL_ACCOUNT_D T91397 /* Dim_W_GL_ACCOUNT_D */
    W_GL_OTHER_F T91707 /* Fact_W_GL_OTHER_F */
    SAWITH1 D4,
    SAWITH3 D2
    WHERE ( T314914.HIER_CODE = T315731.SEGMENT_LOV_ID
    AND T314914.HIER_NAME = T315731.SEGMENT_LOV_NAME
    AND T91397.ROW_WID = T91707.GL_ACCOUNT_WID
    AND T91707.ACCT_PERIOD_END_DT_WID = D4.c2
    AND T314914.HIERARCHY_ID = T315731.SEGMENT_VAL_CODE
    AND T91397.ACCOUNT_SEG13_CODE = T315731.SEGMENT_VAL_CODE
    AND T91397.ACCOUNT_SEG13_ATTRIB = T315731.SEGMENT_LOV_ID
    AND T315731.SEGMENT_LOV_NAME =
    'Account_Retail_Distribution'
    AND T315731.SEGMENT_LOV_ID = 1000165
    AND D2.c1 = D4.c1
    AND (D2.c4 IN ('2011', '2012')))
    GROUP BY T314914.HIER1_CODE,
    T314914.HIER1_NAME,
    D2.c2,
    D2.c3)
    SELECT D1.c1 AS c1,
    D1.c2 AS c2,
    D1.c3 AS c3,
    D1.c4 AS c4,
    D1.c5 AS c5,
    D1.c6 AS c6
    FROM ( SELECT DISTINCT 0 AS c1,
    D1.c2 AS c2,
    D1.c3 AS c3,
    D1.c4 AS c4,
    D1.c1 AS c5,
    D1.c5 AS c6
    FROM SAWITH4 D1
    ORDER BY c2 NULLS FIRST, c4 NULLS FIRST, c3) D1
    WHERE ROWNUM <= 65001

    Hello Gurus, Experts
    Any help/tips here ...

  • SQL Express 2008 R2 and SQL 2005 Server SP1 in single Windows 2003 server

    Hi,
    I am using a Windows Server 2003 R2 Enterprise Ed SP2 OS with SQL 2005 SP1 intallled on it for our Nav 5 database.
    As my backup software requires SQL Express 2008 R2 as default daabase, is it possible to install this in the same server with the SQL 2005 currently running on it? Would there be any impact on the existing SQL 2005 and the application and the Navision database
    on it?
    Appreciate your help.
    Sharon Lo

    Hi,
    I am using a Windows Server 2003 R2 Enterprise Ed SP2 OS with SQL 2005 SP1 intallled on it for our Nav 5 database.
    As my backup software requires SQL Express 2008 R2 as default daabase, is it possible to install this in the same server with the SQL 2005 currently running on it? Would there be any impact on the existing SQL 2005 and the application and the Navision database
    on it?
    There is no issue with installing multiple versions of SQL Server on a machine.I have SS 2005 ,2008 R2 and 2012 all on same machine and they work just fine. You can install all version instances side by side and all will work independently from
    each other.
    Now issue which might cause problem  your SQL Server 2005 is SP1 which is a Blunder IMO. Please ASAP patch it to SP4 because you are running very old version of 2005 which is unsupported by Microsoft and also SP4 includes MANY fixes for SQLServer
    2005. Applying SP4 will fix many issues and will bring you under Microsoft support.
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
    My TechNet Wiki Articles

  • Two SID installation a single machine???

    Hello,
    it's possible to install a single 2 system with the same SID on a machine??? (ECC 6.0, oracle 10,win 2003)
        Thank you!

    Hi,
    Two system on single machine with same SID is not possible.
    you have to use different SID to install two system on single machine.
    check Note 28392 - Two R/3 Systems on one Windows NT Server
    regards,
    kaushal

  • Very Strange Network Issue With Two Guests on 2012 R2 Hyper-V Failover Cluster

    Hi all.  We're having a odd issue with two guests on our 2012 R2 failover cluster.  
    In a nutshell, if we shutdown a particular server (I'll call it Server A) another totally different server (Server B) on the same node loses it's network connectivity to the domain. If we start server A back up, network connectivity returns on server B.
    At first I thought server A might be running a service that was somehow linked to server B, so I decided to disable server A's NIC.  Interestingly, that had no affect on server B's connectivity.  
    The next step I tried was pausing server A and again, no adverse affect on server B's connectivity.  
    Next step was to live migrate server A to another node.  This action did
    cause server B to lose its network connection. 
    One other clue is that if I ping server B from either of the Hyper-V hosts in the cluster, I never lose network connection to server B.
    So I would suspect this is some network issue on the cluster, but I'm kind of at a loss where to go from here.  
    Has anyone seen this behavior before or does anyone have any troubleshooting suggestions I can try?
    Thanks! 
    George Moore

    Hi Sir,
    I'v never seen this before .
    >>Next step was to live migrate server A to another node.  This action did
    cause server B to lose its network connection. 
    They are connecting to same virtual switch ?
    First please run cluster validation to check if there is any error .
    If it is ok , please try the following items for troubleshooting :
    1. shutdown  serverA   serverB
    2. then add another virtual NIC for serverB
    3. start server B  check if the issue happens to both "old" and "new" virtual NIC .
    In addition , you can live migrate both A and B to another node , then try to live migrate A to the original node .
    If the issue persists , I would suggest you to remove that virtual switch on both nodes then re-create them .
    Best Regards,
    Elton Ji
    If it is not the answer please unmark it to continue
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • Facing issues with oracle client installation 32 bit 10.2.0.1

    Hi ,
    I am facing issues with oracle client installation 32 bit 10.2.0.1
    Windows 2008 R2 enterprise edition 64 bit
    Java 1.6 update 34
    Below is the error recieved:
    Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x8079055
    Function=[Unknown.]
    Library=C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\client\jvm.dll
    NOTE: We are unable to locate the function name symbol for the error
          just occurred. Please refer to release documentation for possible
          reason and solutions.
    Current Java thread:
      at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.RegSetValue(Native Method)
      at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.RegSetValue(OiipwWin32NativeCalls.java:516)
      at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.RegSetValue(OiipwWin32NativeCalls.java:473)
      at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.setInstallerKey(OiipgBootstrap.java:511)
      at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.updateInventoryLoc(OiipgBootstrap.java:418)
      at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.doInvSetupOperations(OiicSessionInterfaceManager.java:401)
      at oracle.sysman.oii.oiic.OiicInvSetupWCCE.doOperation(OiicInvSetupWCCE.java:217)
      at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
      at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1273)
      at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
      at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:547)
      at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:935)
      at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:872)
    Dynamic libraries:
    0x00400000 - 0x0040B000 C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\javaw.exe
    0x77C60000 - 0x77DE0000 C:\Windows\SysWOW64\ntdll.dll
    0x75AB0000 - 0x75BC0000 C:\Windows\syswow64\kernel32.dll
    0x77420000 - 0x77467000 C:\Windows\syswow64\KERNELBASE.dll
    0x77370000 - 0x77410000 C:\Windows\syswow64\ADVAPI32.dll
    0x76610000 - 0x766BC000 C:\Windows\syswow64\msvcrt.dll
    0x75DD0000 - 0x75DE9000 C:\Windows\SysWOW64\sechost.dll
    0x776E0000 - 0x777D0000 C:\Windows\syswow64\RPCRT4.dll
    0x757C0000 - 0x75820000 C:\Windows\syswow64\SspiCli.dll
    0x757B0000 - 0x757BC000 C:\Windows\syswow64\CRYPTBASE.dll
    0x77470000 - 0x77570000 C:\Windows\syswow64\USER32.dll
    0x764F0000 - 0x76580000 C:\Windows\syswow64\GDI32.dll
    0x77C30000 - 0x77C3A000 C:\Windows\syswow64\LPK.dll
    0x75820000 - 0x758BD000 C:\Windows\syswow64\USP10.dll
    0x74EA0000 - 0x74EEC000 C:\Windows\system32\apphelp.dll
    0x6EF10000 - 0x6EF9D000 C:\Windows\AppPatch\AcLayers.DLL
    0x76720000 - 0x7736A000 C:\Windows\syswow64\SHELL32.dll
    0x761D0000 - 0x76227000 C:\Windows\syswow64\SHLWAPI.dll
    0x76350000 - 0x764AC000 C:\Windows\syswow64\ole32.dll
    0x75F30000 - 0x75FBF000 C:\Windows\syswow64\OLEAUT32.dll
    0x74660000 - 0x74677000 C:\Windows\system32\USERENV.dll
    0x74650000 - 0x7465B000 C:\Windows\system32\profapi.dll
    0x74340000 - 0x74391000 C:\Windows\system32\WINSPOOL.DRV
    0x74570000 - 0x74582000 C:\Windows\system32\MPR.dll
    0x6E8B0000 - 0x6EAC8000 C:\Windows\AppPatch\AcGenral.DLL
    0x6EFA0000 - 0x6F020000 C:\Windows\system32\UxTheme.dll
    0x6F060000 - 0x6F092000 C:\Windows\system32\WINMM.dll
    0x74840000 - 0x7484F000 C:\Windows\system32\samcli.dll
    0x6F0D0000 - 0x6F0E4000 C:\Windows\system32\MSACM32.dll
    0x74C80000 - 0x74C89000 C:\Windows\system32\VERSION.dll
    0x6F340000 - 0x6F343000 C:\Windows\system32\sfc.dll
    0x6F260000 - 0x6F26D000 C:\Windows\system32\sfc_os.DLL
    0x6F040000 - 0x6F053000 C:\Windows\system32\dwmapi.dll
    0x758C0000 - 0x75A5D000 C:\Windows\syswow64\SETUPAPI.dll
    0x75C90000 - 0x75CB7000 C:\Windows\syswow64\CFGMGR32.dll
    0x77570000 - 0x77582000 C:\Windows\syswow64\DEVOBJ.dll
    0x75DF0000 - 0x75F27000 C:\Windows\syswow64\urlmon.dll
    0x775A0000 - 0x77695000 C:\Windows\syswow64\WININET.dll
    0x75FD0000 - 0x761CF000 C:\Windows\syswow64\iertutil.dll
    0x76230000 - 0x7634E000 C:\Windows\syswow64\CRYPT32.dll
    0x75FC0000 - 0x75FCC000 C:\Windows\syswow64\MSASN1.dll
    0x6F0C0000 - 0x6F0C6000 C:\Windows\system32\SHUNIMPL.DLL
    0x6F030000 - 0x6F03D000 C:\Windows\system32\SortServer2003Compat.dll
    0x75CC0000 - 0x75D20000 C:\Windows\system32\IMM32.DLL
    0x75BC0000 - 0x75C8C000 C:\Windows\syswow64\MSCTF.dll
    0x08000000 - 0x08138000 C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\client\jvm.dll
    0x10000000 - 0x10007000 C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\hpi.dll
    0x003F0000 - 0x003FE000 C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\verify.dll
    0x007B0000 - 0x007C9000 C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\java.dll
    0x007D0000 - 0x007DE000 C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\zip.dll
    0x051D0000 - 0x052E2000 C:\Users\Administrator\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\awt.dll
    0x052F0000 - 0x05341000 C:\Users\Administrator\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\fontmanager.dll
    0x6E7C0000 - 0x6E8A7000 C:\Windows\system32\ddraw.dll
    0x6F020000 - 0x6F026000 C:\Windows\system32\DCIMAN32.dll
    0x75DA0000 - 0x75DCD000 C:\Windows\syswow64\WINTRUST.dll
    0x6E6F0000 - 0x6E7BC000 C:\Windows\system32\D3DIM700.DLL
    0x05770000 - 0x05793000 C:\Users\Administrator\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\JavaAccessBridge.dll
    0x007E0000 - 0x007E5000 C:\Users\Administrator\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\jawt.dll
    0x007F0000 - 0x007F7000 C:\Users\Administrator\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\JAWTAccessBridge.dll
    0x06340000 - 0x06359000 C:\Users\Administrator\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\oui\lib\win32\oraInstaller.dll
    0x06470000 - 0x0648E000 C:\Users\Administrator\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\jpeg.dll
    0x776B0000 - 0x776DA000 C:\Windows\syswow64\imagehlp.dll
    0x6E600000 - 0x6E6EB000 C:\Windows\syswow64\dbghelp.dll
    0x776A0000 - 0x776A5000 C:\Windows\syswow64\PSAPI.DLL
    Heap at VM Abort:
    Heap
    def new generation   total 704K, used 90K [0x10010000, 0x100d0000, 0x10770000)
      eden space 640K,  13% used [0x10010000, 0x10026448, 0x100b0000)
      from space 64K,   2% used [0x100c0000, 0x100c07a8, 0x100d0000)
      to   space 64K,   0% used [0x100b0000, 0x100b0000, 0x100c0000)
    tenured generation   total 8436K, used 5698K [0x10770000, 0x10fad000, 0x16010000)
       the space 8436K,  67% used [0x10770000, 0x10d00a40, 0x10d00c00, 0x10fad000)
    compacting perm gen  total 12288K, used 12049K [0x16010000, 0x16c10000, 0x1a010000)
       the space 12288K,  98% used [0x16010000, 0x16bd47a0, 0x16bd4800, 0x16c10000)
    Local Time = Thu Aug 22 14:42:03 2013
    Elapsed Time = 40
    # HotSpot Virtual Machine Error : EXCEPTION_ACCESS_VIOLATION
    # Error ID : 4F530E43505002EF
    # Please report this error at
    # http://java.sun.com/cgi-bin/bugreport.cgi
    # Java VM: Java HotSpot(TM) Client VM (1.4.2_08-b03 mixed mode)
    Thanks

    10.2.0.1 is not supported/certified on Win 2008, so expect issues with the install and/or with using the software.
    Why cannot you use a supported version - minimum is 10.2.0.4, which is only available to customers with an Extended Support contract
    http://docs.oracle.com/cd/B19306_01/relnotes.102/b14264/toc.htm#BABGFAJI
    HTH
    Srini

  • Issue with DataServices4.0 Installation

    Hi All,
    Can you throw some light on Issue which I'm facing
    As part of the installation of BOXI Data Services 4.0 on Windows 2003 Server 64 Bit box.  One of the critical requirement i.e, KB941105 was missing.   We tried downloading the hot fix using: http://support.microsoft.com/kb/941105
    But could not find it and not able to proceed with installation. Please suggest on how to overcome this problem.
    Thanks,
    Raj

    The hotfix is available at the top of the page, just below the main "FIX: Error messages after SQL Server 2005 or SQL Server 2000 ......." message.
    Regards,
    Mark

  • IDES 46E with windows 2003 server Installation errors..

    Hi,
    Can some body help me in IDES 46E with windows 2003 server Installation?.I'm tired of installing with this combination on my desktop my env as follows.
    1.Windows 2003 Server
    2.JDK.142
    3.Oracle 9.0.2 with 7 patch
    4.IDES 46E
    Installed successfully Database and SAP but while exporting data in to tables then getting errors.
    Thanks in advance..
    Sreedhar

    Hi GreetZ,
    I opened the respective 3200,3300,and 3600 ports and I can access my router from outside home.I can also ping <IPAddress> and telnet<IPAddress> successfully.But I'm unable to telnet <IPAddress><space>3600 giving error..connection failed on port 3600 and same error for remaining ports too.Pls help me in fix this issue.
    Thanks for your replies..
    Sreedhar

  • I don't know if this is the right section but I experience the following issue with Adobe Acrobat Pro XI installed on Windows 8.1. When I start Acrobat the related window opens normally but, after some scroll up and down along the document, it blocks, Acr

    I don't know if this is the right section but I experience the following issue with Adobe Acrobat Pro XI installed on Windows 8.1. When I start Acrobat the related window opens normally but, after some scroll up and down along the document, it blocks, Acrobat doesn't respond to any command I can give and, in place of the pointer arrow, a vertical bar, as the one of the text editor appears. The only way I can stop Acrobat is by means of the task manager. I tried to de-install and the re- install Acrobat but the behaviour is always the same. What can I do??

    Have you opened Acrobat and gone to Help>Updates to get an updated install?

  • On windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it  a windows 8 issue?

    on windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it  a windows 8 issue?

    No. You have no alternative but to plug it into a computer running iTunes and restore it.

  • Two R/3 Systems on one Windows NT Server

    Hello SAP  Guru ,
    I have ECC6 on database DB2 for Development server and quality server as different client . Now i want to install quality server on same H/W . i go through sdn forum and market place but not found sufficient information for DB2 database , i go through      
    Note 28392 - Two R/3 Systems on one Windows NT Server also.
    Please suggest some more information to keep in mind while doing this activity.
    Thanks
    Om....

    Hi juan,
    "When you run two systems in the same box you need to be aware that any mayor mantainance done in one system will have a detriment effect on the other one, specially if you're sharing the Database. During the installation you may find necesary to have some downtime in the system that is currently running as OS or DB restarts are potentially necesary."
    I am agree with your post. but still my question is not answered . i am looking for information about what are the things need to modify in current system (either on OS , DB or SAP side) before start of new instance installation for Quality server.
    let me explain bit more.
    If current system having database name Dev now if i install new instance of SAP on same H/W with name QLT for SID as well as Database name. what are the things i need to change prior installation start so that not any conflict will happen (on OS , DB & SAP)
    Or nothing is require to change i can just start installation as on fresh system.
    Regards
    OM.......

  • Space Problem in G: - after NW2004s SR1 installation on Windows 2003 server

    HI Friends,
    I have installed NW2004s SR1 on Windows 2003 server with Oracle 10g database successfully. My server has sufficient harddisk space as follows.
    C: 9.6GB
    G: 24GB
    H:64GB & I: 73GB.
    RAM is 6GB
    While installing NW2004s i have defined a paging size on C: 400MB-1600MB and
    i have set the option as System Manageble on other drives G, H& I drives. I did not get any Swap space problem while installing.
    During installation I have chosen G: drive to store MirrorlogA, MirrorlogB, Oraarch, OriglogA, OriglogB folders of Oracle for redolog archives,.Total size of all these folders is 17.4 GB
    G: drive has one more folder Program files which is of 155KB  and no other files exist in it.
    But My system says that I am running out of Space on G: drive and free space available now is only 44MB.
    My question is where has the rest 5GB of space gone? Is it consumed as a part of Paging file which i have set on this drive as System manageble??
    I have set the same option on other drives too i..e H & I. But i am not facing any space issues for these drives.
    What could be going wrong?? Please suggest me how to correct this
    Thanks
    mv_d

    898118 wrote:
    Hi All,
    I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
    I double-insured that there is enough disk-space and I am also in the Administrators-Group.
    Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
    Regards
    Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names.

  • ORA-12546 error during installation of 9.2.0.1 on Windows 2003 Server

    I have encountered an error whilst installing oracle 9.2.0.1 on a Windows 2003 Server. The error appears in the final part of the installation, when the Database Configuration Assistant is performing some work - it reaches the part where it creates the database instance - here we get the "ORA-12546: TNS Permission denied" error - this part of the installation is marked as failed - i can retry it as many times as i want but the same thing happens. If i finish the installation (even though the error has occurred) the oracle installation doesn't really work . I can't open the Database Configuration Assistant and don't really have a sysdba user. However all the services seem to be running fine (even the tns listener)
    I was wondering whether it could be a problem that would be solved with the 9.2.0.3 patch - but this patch assumes that you have performed a proper working installation of 9.2.0.1, so I'm not quite convinced that the problem is related to the oracle version.
    I've read other threads where the problem has been read/write privileges on some files and folders, but this shouldn't be an issue when I'm logged onto the machine as a local administrator.
    The install.log files don't really provide any extra information.

    I have exactly the same problem installing Oracle on a Windows Server 2003 X64 Enterprise Edition. I have Intel Xeon processors (EM64T).
    I tried to install Oracle for 64 bits, but it didn't work. Now I'm trying to install 32 bits version of Oracle, and I get the same error and the same problem, mentioned above.
    Can anyone help us, I can't figure out a way to solve it. I don't know if Oracle for 32 bits is not compatible with that version of Windows, even if it is supposed to be.
    Thanks!!!!

  • XMII installation on Windows 2003 Server ( 64- Bit)

    Hello,
    Can we install xMII 11.5 SR01 on Win 2003 server ( 64 -Bit ) ??? When i am trying to download xMII software from SAP market place , under xMII downloads
    -> i can see only win32 link.
    Thanks
    Sharat

    Sharat,
    Did you try installation? I think that hasn't problem. The Windows 2003 Server has the full compabillity with x86 (32 bits) softwares.
    Post here your issues, I will try to help you. I'm very interested in this results.
    Regards,
    Vinicius Martins
    Neoris/Konitech
    Brasil

  • How to install 11.5.10 on VMWare with Windows 2003 Server?

    Need help on installing 11.5.10 on VMWare which runs Windows 2003 Server.
    I've XP Pro laptop with 2GB RAM and 80GB HDD and external HD with 250GB. Gathered all required s/w for installation.
    The Win 2003 Server VMWare is sitting on the external HD. I want to install pre-req s/w along with 11.5.10 on the VMWare.
    (1) How do I make the laptop's CD drive and HD visible to the VMWare?
    (2) Can I use the XP laptop HD as staging area and install on VMWare on external HD?
    (3) What are the disadvantages/risks of using the external HD for both staging and actual installation?
    Any help is appreciated.
    FYI - we already have an Oralce 11.5.9 on VMWare. All services are up and running. Able to logon to SQL*Plus and EBS home page. The issue is, we are not able to connect to this Oralce VMWare image from other VMWare image(Siebel), ie, if we do a telnet to oracle vmware image connection establishes and closes immediately. No clue on why this is happening. But this is not happening when we did telnet from a vmware image(plain win 2003 server) that does not have Siebel. All vmware images work fine individually.
    Any inputs?
    Thx,
    Jags

    Need help on installing 11.5.10 on VMWare which runs Windows 2003 Server.
    I've XP Pro laptop with 2GB RAM and 80GB HDD and external HD with 250GB. Gathered all required s/w for installation.
    The Win 2003 Server VMWare is sitting on the external HD. I want to install pre-req s/w along with 11.5.10 on the VMWare.
    (1) How do I make the laptop's CD drive and HD visible to the VMWare?
    (2) Can I use the XP laptop HD as staging area and install on VMWare on external HD?
    (3) What are the disadvantages/risks of using the external HD for both staging and actual installation?
    Any help is appreciated.
    FYI - we already have an Oralce 11.5.9 on VMWare. All services are up and running. Able to logon to SQL*Plus and EBS home page. The issue is, we are not able to connect to this Oralce VMWare image from other VMWare image(Siebel), ie, if we do a telnet to oracle vmware image connection establishes and closes immediately. No clue on why this is happening. But this is not happening when we did telnet from a vmware image(plain win 2003 server) that does not have Siebel. All vmware images work fine individually.
    Any inputs?
    Thx,
    Jags

Maybe you are looking for

  • Need Bapi Names for Post Goods Reciept and Post Goods issue to STO in MIGO

    Hi All.. I need to post goods receipt using input data in MIGO. Is there any BAPI that i can use. Also once STO (Stock Transport order) is created, i also need to Post goods issue to STO in MIGO transaction. I do need a bapi for this too... Appreciat

  • Itunes 10.5 does not detect my ipod touch

    I recently update my itunes to 10.5 and when I connect my Ipod touch to my computer Ituens will not detected. My Ipod will show up on my computer but not on Itunes. Any ideas how can I fix this??? I try restaring my Ipod, REinstalling Itunes but noth

  • Problem inserting video into a page

    Hi, I have a page created using a custom page layout that I created.   I tried using the Video page field but when I configure the video, with youtube url it doesn't work.  here is the url I used,  https://www.youtube.com/watch?v=v6yvW66-ThI&feature=

  • Letter of Outlook dont' open

    Previously tried to keep the letter of Outlook they save in a separate file folder Deleted Items, Sent, etc. All extension  dbx doesn't open, & don't open from Outlook. How outlook express dbx viewer do you advice me ?

  • I can't open certain website when I am on the 4G LTE network.

    And it isn't just my phone others can't open them either when on the network. What causes this. They open when my phone is on wifi?