Issue with upload of time events through SAPCDT45

Dear Consultants,
I am facing an issue while uploading the clocking data for locked entries.
When the entries are uploaded from CC1TEV to TEVEN table using program SAPCDT45, "Changed By" and "Changed On" fields
are coming blank in PA30 IT2011
PFA the screenshot describing the current situation for such a record updated via SAPCDT45.There you can see that the change information is not getting updated. whereas in normal cases where the data is uploaded directly to TEVEN table, this data is coming properly.
Kindly help.
Regards,
Udit Singhal

Hi Udit,
There are three fields in CC1TEV which must be filled if you wish to update UNAME and AEDTM fields in IT2011.
ERDAT - Date of Entry in SAP
ERTIM - Time of Entry in SAP
USRUP - User who uploads the data
In real time, the flat file will come through an interface from time recording system. It won't have data for the above fields. Hence, the program RPTEUP10 should be modified to update these fields.
When the program SAPCDT45 runs, it will read these values to update UNAME and AEDTM fields.
I have already implemented this for a couple of clients and I can assure you that it works.
Also, RPTEUP10 doesn't work in sequential file mode which will be needed for picking up file from SAP Application Server. Hence, you will need to customize the program.
Please refer my blog where I have explained in detail why we need to customize program RPTEUP10.
I hope this information is helpful and resolves your query.
Thanks and regards,
Vivek Barnwal

Similar Messages

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work. Help?

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work.
^^ that's the main problem. Here's the full history.
I bought a new 13" i5 MBP, early 2011 edition. I had an old white Macbook 2.14 ghz core2duo on Snow Leopard. I attempted to port over my time machine backup, but encountered problems in that my User was inaccessible from the new computer after the import finished, and I had to go in and change the root password, etc, and for some reason or another, I couldn't install any programs at all from that administrator's account. By "couldn't" I mean I could install them, but upon installation they would never boot. So, I took it to the apple store and did a clean install from the most up to date Lion OSX. Then, I created a brand new admin account, instead of trying to import the old one, and things seemed great. Then, I just imported my old files from the TM backup, but not any system settings, permissions, or user data. Just my Docs, pics, vids, apps, and itunes stuff.
Here's where things get weird again. I imported this stuff under the name "old", but all of these folders have a red negative sign on them, marking them as restricted. So, from my main admin account, I cannot even peruse these folders. Since I didn't import user data, I can't sign in to the "old" account to change permissions. I already tried to change the permissions from system preferences, but that didn't change anything. And now, for whatever reason, of all the apps that were imported then, MS Office is the only set of apps that does not work. When I click on it, it just says there was a problem and asks if I'd like to send a report to apple. I tried reinstalling it to no avail. I'm an English student, so i really need access to Word. Can anyone help? The Apple store is a major detour for me and would like to fix this issue myself.

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

Issue with site load time when exported as HTML. Addressed?

Has the issue with website load time been addressed?
I believe the site attempts to load the entire image content at the initial visit - meaning any galleries with numerous pictures are all included when first getting to the site. This is causing a HUGE increase in load time. I was told when I last brought it up that it was an apparent issue that needed to be addressed.
Any type of resolution coming?
Site for reference: www.dkrecollection.com

Major updates of Muse are targeted to release roughly every quarter. The 1.0 release was in mid-May. The 2.0 release was in mid-August. A fundamental change to image loading would only appear as part of a major update due to the engineering and testing efforts required.
As provided in your previous thread http://forums.adobe.com/message/4659347#4659347 the only workaround until then is to reduce the number of images in the slideshow.

Issue with Upload of PDF

Hello,
I have converted an eFolio I received from my hotel into a PDF - and I can upload the PDF no problem and assign/attach to my expense report. However, when I am editing the expense report and try to "view" the PDF - the system does not apepar to recognize it and asks me to "save" the PDF (and it gives it a funny number also).
In the end - I took a photo of my printed hotel receipt to make a jpg file and submitted from my mobile device - but we do need to resolve the issue with the pdf.
The system seems to have no problem with the PDF it has of my itinerary. Also, when I open the PDF from my desktop - adobe acrobat opens no problem - so the PDF seems to be fine.
Any assistance would be appreciated as having to print my eFolio so I can take a photo of it is a waste of time and resources.
Thanks,
Steve Monk,

For a list of supported file types, please refer to the Help Center document "Claiming Expenses" > Main Tasks > Attaching Receipts.

Issues with site load time. (bg images)

Hey, guys.
Having an issue with a site uploaded with MUSE. None of the images are overly large, but the load time is 5 to 6 seconds where it should be instant.
Looking at it, it appears as though all of the images are attempting to load simotaneously in one large chunk rather than in a line. Is there anyway to remedy this?

This isn't related to background images. It's how Muse is handling the loading of the ~100 images in the slideshow. Thanks for pointing this out. Until we have altered the loading method for these images, the only workaround I have is to decrease the number of images in the slideshow.

Issue with PTO (Paid Time Off) quota generation

Hi All,
We have an issue with quota generation of PTO for our employees.
The issue goes like this:
We have a Paid time off for employees 5weeks( 200 hrs) for employees who have worked less than 5 years.
we have paid time off for employees 6 weeks ( 240 hrs) for employees who have worked more than 5 years.
we have the following logic that has to go in this config:
-- Our fiscal year starts on Feb 1st and ends on Jan end or Feb starts which has a full week of working days. ( ex: if 01/31/2012 falls on a Thursday the following Monday which has full 5 day working week would be the end of the fiscal year).
-- Depending on the working hours of the employees and the date of joining for the first year ( for new hires)0041 info type the eligibility gets varied and reduced. Ex( employees who joins on start of fiscal year and works 40hrs per week schedules is eligible for 200hrs of PTO. Employees who join in the month of august and works for 35 hrs per week ( i.e mid of fiscal year) would get 91 hrs of PTO.
I need to put this in the system. I am thinking this could be done with out tweaking PCR.I need help in configuring this in Absence quotas as to what are the things i need change in system config and how do i do it. Please help with some screen shots if possible. I really need this to get it done ASAP. Looking forward for help.
Thanks,
Chowdary.

We use TM00 schema. Can i call TS15 and TS 12 rules into TM00 acheieve my issue of quota entilements?
Iam doing this because my businees needs to see if an employee chages his work schedule from 40 to 30 or 20 etc.. the PTO has to vary accordingly.
As the minimum eligibility is to work for 20 hrs to avail the PTO days. If at any point the employee drops it under 20 he will not be eligible till he work any this >= 20hrs per month so the evaluation has to check periodically to update the quota availability.... I need help plz suggest ...

Issue with Date and Time Picker on Windows 8.1 and Office 2013

We are having a issue with the Developer tool in Excel called the Date and Time Picker which puts a calendar field into the spreadsheet where you can select a date from the calendar popup
If we change this date field and then save and close and reopen it reverts back to the previous date before the change was made
If we do the same process on a Windows 7 machine with Office 2013 it saves the changes we made to the Date and Time picker field

Hi jdono2,
I'm using Windows 8 and Office 2013,and I can't reproduce this issue.
Please make sure you have already upgraded to the latest version of excel, try to reregister the MSCOMCT2.OCX.
Also you can try to use another date picker add-in to test this issue.
http://social.msdn.microsoft.com/Forums/office/en-US/36f83f24-cd76-4f8e-aa7b-5f166666e7d3/excel-2013-popup-calendar?forum=exceldev
Wind Zhang
TechNet Community Support

Issues with restoring a Time Machine backup onto new Macbook Pro Retina

I recently got a new Macbook Pro Retina and I've been trying to restore a Time Machine backup made today from my old Macbook Pro laptop. I didn't restore from the first start up (foolishly, seemingly) simply because of the trivial reason of wanting to see the system all clean and new.
I've tried the Migration Assistant but it gets stuck on "looking for source..", despite having the ex.HD plugged in and double checking the existance of the backup itself on the ex.HD.
I've also tried booting the laptop up in the 'restore' mode (cmd R) and restoring from there but it sends me in a constant loop of 'this backup was from a previous model of laptop' or something to that affect. It also doesn't display the recent backups at all, only displaying those from the beginning of this year for some reason. All backups are in the same place on the ex.HD so its not an issue with locating the backups.
Really stuck on this one! Would really appreciate some help!
Thanks a lot, and merry Christmas

Yes, you can restore to another machine if needs be.

Authorization issue with upload functionality

Hi,
I have issue with authorization with upload functionality.
we have country as authorization relavant field. if we are giving some country authorization to user it is giving authorization error at upload functionality.
But if we give all country authorization than it is working fine.
Could you guide me how to avoid this situation. We can not give all country authorization to all the users.
Thanks,
Naman Shah

Hi Naman,
For SAP BPS
Here while defining a variable you can set the user authorization and can determine which all records can be seen by the user.
For eg. Create a variable for country with replacement type User-specific values. Here you can assign values to a particular user id.
Please check for more details:
http://help.sap.com/saphelp_nw70/helpdata/EN/43/548bafbc0f357ee10000000a11466f/frameset.htm
For SAP IP
Please Check: User Authorization in SAP IP
Regards, Rishi
Edited by: Rishikesh Sinha on May 6, 2009 8:01 AM

TenFourFox issues with computer date/time

I had an interesting problem tonight which I fixed and can replicate whenever I feel like. On my old Powermac I run TenFourFox which is what I assume most are doing.
The battery in my Powermac needs to be replaced, but I almost never unplug the computer so I'm never worried about the computers time, as it is always right.
Tonight I had to unplug it and when I started it up I got the "wrong time" notice but I mostly ignorred it. Everything worked well and then I tried using TenFourFox...it was an utter disaster.
It was slow, unreponsive and overall unuseable to say the least. After a lot of thinking I set the time right and it worked again, as it had before.
So after this I set the time wrong again and sure enough, TenFourFox before unuseable.
Does anyone know if there are any known issues with TenFourFoxx in the department? Could someone else try this? (Just set your clock back a few days and try to open TenFourFox)
I'm curious if I've found an issue with the app because I know for a fact ti's not hardware issues.

Running v 5.0 here, no problem in TFF changing the Time backwards, but Safari wouldn't work here until I cleared the Caches.
Some Servers are Date/Time critical & consider anything trying to connect reporting the Time off by more than a minute will refuse connections.

Does anyone have issues with start up time

does anyone have issues with start up time

Have you tried a reset?
Press & hold both Home & Power until you see the Apple logo.
If that doesn't fix it, restore it as new and see if that fixes it.

Issue with Upload wizard in APEX 4.2

Hi,
We have APEX 4.2. We have a table with 70 columns. So to load data to that table we are using upload data wizard. Due to 50 columns limitation in APEX upload wizard, we have divided the upload file in two parts , file 1 with first 40 columns and file 2 with 30 columns and both of them have same primary keys included.
When we load the data to the table through file 1 , data is loaded successfully but when we try to load file 2 , wizard shows data was updated but the data is not reflected in the table. What could be the reason ? Please advice.
Regards,
Andy

Hi Pat,
So currently we are using the following approach
1. Split the file into two files (file 1 and file 2) with primary key included in both the files.
2. We have two temp tables where these files will be uploaded resp, and it will also capture the username in the tables.
3. When the 2nd file is done uploading ,we match the # of rows in both the tables by that user if it matches we run a sql to insert/update data in the actual table.
4. If the record count doesn't match (means if file 1 and file 2 are not in sync) we delete the data from the temp tables just for that user and then user can reload it.
5. Once the insert/update is done and when the user tries to load the file again , we delete old data from the temp tables just for that user.
So every time user loads data ,it will maintain data only for that load.
So this way multiple users are able to upload files.
Also currently we finished development of alternate method to load entire file at once.In this approach we are not using upload utility, we have option where user can upload the file (1st page of upload utility) and then procedure is kicked of to get the file from wwwv_flow_files (APEX table) from a BLOB column.
Data is parsed using a procedure and then inserted/updated into the original table.
I hope this helps. Kindly let me know if you need more details.
Thanks and Regards,
Andy

Security Issues with uploading files into APEX - How is anti-virus handled?

Hi APEXers!
We have been using APEX 3 for some time and are now migrating to APEX 4. We have a request for a new application that will require uploading spreadsheets. From other developers, I know it can be done in a few ways. The only thing we have done before is limitied - storing them in BLOBs.
With the Websheets in APEX 4, users could load them directly into the database.
But the anti-virus issue has always been unclear. For the apps that we are allowing to upload to BLOBs, they are small user, internal apps so we hope that our enterprise desktop software will stop a bad file before it gets uploaded.
We have gotten some questions about allowing outside-our-network people to upload spreadsheets or maybe even the public. So far, our security people have just said no - but I wondered what everyone else is doing?
Are there any White Papers or articles on this? My general impression is that anti-virus software has to be installed at the server level to deal with this.
If anyone can provide some guidance, I would appreciate it as I have to figure out what to tell the development team requesting to do this.

Do you have to take excel format? CSV would be a lot safer.
You might take inspiration from this:
http://stackoverflow.com/questions/3363767/how-do-you-virus-scan-a-file-being-uploaded-to-your-java-webapp-as-it-streams

Is anyone else having issues with uploading imovie app videos to youtube?

hello everyone one. im scared as heck for posting in here because im honestly afraid all the smart people in here will eat my eyes for ju-ju bees, however here it goes, and thank you to anyone brave enough to help. I've just had the iphone 4s for over a week. as of today, i can not upload any of the imovie app movies to youtube, which was a huge selling feature for me, so i could post video testimonials on the run and not be so invisable on the weekends as a musician. "ive been invisable on social media on weekends as long as ive even known about facebook, and I know its been hurting me."
my first two videos, uploaded without a hitch to facebook and you tube. of course a larger one had to wait until i got home to wifi bc it was too big. anyhow, this morning, my new one made it up to facebook, but a you tube upload has failed 5 times already, and this is upsetting.. only being a musician, taking this step to having a data plan and iphone was a huge risk, but i planned on maxing out what i could from the phone to make it even easier to support my family..
any ideas? please keep in mind im not a teckie, and cant even synch it up to my 5 year old laptop yet... ill be taking an hour trip to the apple store soon to do that.....

Hey there Jezza717,
Thank you for using Apple Support Communities!
If the iTunes window is not loading properly, I would try closing all the apps that are running:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
From: iOS: Force an app to close http://support.apple.com/kb/ht5137
Then restart the iPhone:iOS: Turning off and on (restarting) and resettinghttp://support.apple.com/kb/ht1430 If that does not resolve the issue, try the troubleshooting steps outlined in this article:Can't connect to the iTunes Storehttp://support.apple.com/kb/TS1368
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General >Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General> Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check theuser guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Cheers,
Sterling

Issues with using SV Time-Varying Loudness.vi

Hi,
I am rather new to Labview and am having issues getting my Time-Varying Loudness calcuations to come out correctly. Attached is my current VI and a .csv file of a set of my data (calibrated in Pa. Sample rate = 50kHz for 5 seconds). When i run the VI it does not output what I would expect. Here are my questions:
Time-Varying Loudness:
1) What are there so many signals? There are hundreds of lines, but I only expected one.
2) Why is my x-axis not a range of 1 to 24 like Barks should be?
1/3 Octave Band Analsysis:
1) Why does it look incorrect? Their shouldnt be a linear increase as a function of frequency...
The data is of a part being squeezed and making a squeek. So it is a transient noise that happens around 2 seconds. Additionaly, how would I go about making a waterfall (Time(s),Frequency(Hz),Amplidtude(sones)) of this signal? Is there any easy way? or do I have to make all three signals and add them to make one plot?
Thank you for your help! Let me know if you need more infromation,
-Troy
p.s. i included a picture of the results as well.
Solved!
Go to Solution.
Attachments:
TimeVaryingIssue.zip ‏668 KB

Hi Troy,
1) The SV Specific Loudness VI "chunks" data into 2 ms blocks, and then returns these as individual Specific Loudness vs. Sone plots. The colored lines you are seeing on your graph are representative of the 2,500 2 ms time periods within your five-second acquisition. Each of these plots contains 241 points, however they should occur in ten sample "steps", one for each sone. The digital filter's buffer takes a bit to fill and kick in properly, however, so you may want to give your first few rows( 0-.02 seconds or so) a closer look before using them- you may see a number of unexpected zeroes around the lowest sones.
2) Since you are using a chart, the x-axis will increment with every subsequent run (the previous data is retained.) If you only want to display the most recent data, I would recommend switching to a graph, which can also be found in the graph controls palette. Also, see above (#1) for why the x-axis is longer than 24 points.
3) Remember that dB is a unitless measure, and can only be used in reference to another value. A typical reference for sound is 20 uPa, however you will likely need to equalize your input data and determine/set a dB reference. You may want to take a look at SVL Scale voltage to EU.vi (EU stands for equalized units) and SVL Set dB reference.vi. In your case, I believe the Octave plot is showing your dB relative to a default value of 1. The values should be accurate with respect to one another, but you will need to provide a reference value to calibrate the scale.
4) I think that this VI serves as a good example of how to go about creating a waterfall plot:
Waterfall Display for Octave (DAQmx)
http://zone.ni.com/devzone/cda/epd/p/id/5562
You will need to break up your waveform into chunks, much like the specific loudness VI, but the basic concept is roughly the same (take waveform chunk, take octave measurement of chunk, append octave measurement output cluster to array of clusters, repeat for remainder of waveform, display)
Phew! That was quite a bit of information. Let me know if that makes sense, and don't be intimidated by the detail and/or unfamiliar functions or methods - you're definitely on the right track, or at the very least asking the right questions.
Tom L.

Issue with upload of time events through SAPCDT45

Similar Messages

Maybe you are looking for