Issue with user maintenance in EBP org
Dear experts,
User wants to be assigned to new EBP Org id, presently he is there in other org id.
I heve selected the user and deleted from org id by clicking delete icon. Now I tried to add this user to new org id, through User_gen --> create user from su01 users, but im getting message " Central person" already exists for the user.
I tried to check the user status through users_check, there im getting red indication with message displayed as " Organizational unit 00000000 does not exist" and "user cannot be repaired because the organizatinal unit contains errors"
In EBP organization im not finding that users,
can any one help me on it,
Thanks & Regards,
Krish
Hi,
Solution in the foll thread;
User cannot be repaired because the organizational unit contains errors
BR,
Disha.
Do reward points for useful answers.
Similar Messages
-
Issue with User decision handler in UWL
Hi Friends,
I am facing an issue with user decision hander in UWL. We have modified the XML file to show up the comments box to enter the rejection reason, this is working fine with two approval tasks already but the same thing is not working now with a new task id. In the back end(R/3) everything is the same for both the tasks, in the Portal side my portal consultant says the same. But we were not able to figure out the issue. I even created a new task and tried to use implement the handler changes, but still it is not working. Please advice what could be the issueHi,
can you elaborate what the issue, what do you mean by not working. you are not getting the reason box, or it's giving error,something like that.
Hope we'll be more clear then about your requirement.
venu -
User Maintenance after HR-Org replication
Dear Community,
in a sandbox environment I am currently evaluating HR-SRM Org recplication connecting SRM 6.0 to a copy of an existing HR-system.
I already learned that after active HR-Org replication, I will need to maintain my users in HR directly.
Problem: I know SRM very well but have no clue about HR.
Anyone can tell me which transactions in HR to use to maintain an employee in a way that it will be usable in SRM after replication? I use ECC 6.0 based HR. Alternatively a useful link to the right note or documentation page is highly appreciated.
Thanks and greetings, JulianHi
Please check SAP OSS notes 550055 et 934372 that explain everything
Please refer note no.312090 ,this is a primary note.You can get link for other notes.
There is also a document called TRANSPORTINGEBP_14.pdf in http://service.sap.com_
Use the search engine to find this official document.
Note 447651 Transporting EBP Systems and organisation modell will point you to the document in service.sap.com. Do not be misslead with the name of the document.
Please use SAP OSS note 550055 EBP/CRM: New integration for business partner. - Using classic scenario with separate HR system and you will found this note very useful. In related notes part you can find other useful notes.
Also, you need to set a distribution model from HR to SRM for HRMD_ABA message, and set numbering range for org units to be the same in HR and SRM system (Tcode OONR).
Please try these Very helpful links ->
Re: HR-SRM question
R/3 to SRM
Till SRM4.0, SRM supports only 1:1 positions :user, while SAP HR Org.Structure supports 1:n.
But SRM5.0, Org.Structure supports multiple assignments like in HR. So distribution of HR Master Data/Org.strcture from SAP HR to SAP SRM is better with SRM5.0.
Also see; if this will help, but have a look at note 391085 and report RHALEHRMDORIGXPERT.
Hope this will help. Do let me know.
Regards
- Atul -
Issue with users trying to save reports to thier Documents on one drive.
I am working
on a 2013 SharePoint environment and users who use Power View reports. I
have a user who can create reports on a site I have set up (no problems
there). They can also save reports to PowerPivot Gallery they have added
in their Newsfeed for their personal site (no problems here). The problem
is when they try to save the report and go to Documents on one Drive it fails
with below error message. I am an admin but can save just fine to my
documents. I know the error shows an access issue but not sure where or
how to resolve this issue for users. <o:p></o:p>
P.S. the
issue happens before they even save button it happens when they see the My
Documents and try to open it. Again it is there personal SharePoint site
so not sure why they would not have access.<o:p></o:p>
SoapAction: ListChildren
HttpStatus: 500
ServerErrorCode: rsAccessDenied
ServerError: <detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsAccessDenied</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">The permissions granted to user 'HQEAGLEVIEW\levi.bond' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException:
The permissions granted to user 'HQEAGLEVIEW\levi.bond' are insufficient for performing this operation.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsAccessDenied&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3412.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3412.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message
msrs:ErrorCode="rsAccessDenied" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsAccessDenied&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3412.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">The permissions granted to user 'HQEAGLEVIEW\levi.bond' are insufficient for performing this operation.</Message></MoreInformation><Warnings
xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
here is actual screen shot
<v:shapetype coordsize="21600,21600" filled="f" id="_x0000_t75" o:preferrelative="t" o:spt="75" path="m@4@5l@4@11@9@11@9@5xe" stroked="f">
<v:stroke joinstyle="miter">
<v:formulas> <v:f eqn="if lineDrawn pixelLineWidth 0">
<v:f eqn="sum @0 1 0">
<v:f eqn="sum 0 0 @1">
<v:f eqn="prod @2 1 2">
<v:f eqn="prod @3 21600 pixelWidth">
<v:f eqn="prod @3 21600 pixelHeight">
<v:f eqn="sum @0 0 1">
<v:f eqn="prod @6 1 2">
<v:f eqn="prod @7 21600 pixelWidth">
<v:f eqn="sum @8 21600 0">
<v:f eqn="prod @7 21600 pixelHeight">
<v:f eqn="sum @10 21600 0">
</v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:formulas>
<v:path gradientshapeok="t" o:connecttype="rect" o:extrusionok="f">
<o:lock aspectratio="t" v:ext="edit">
</o:lock></v:path></v:stroke></v:shapetype><v:shape alt="" id="Picture_x0020_1" o:spid="_x0000_i1025" style="width:7in;height:426.75pt;" type="#_x0000_t75">
<v:imagedata o:href="cid:[email protected]" src="file:///C:\Users\KEN~1.CRA\AppData\Local\Temp\msohtmlclip1\01\clip_image001.png">
</v:imagedata></v:shape>
Ken CraigHi Ken,
It's strange that the User Profile Service Application is not available there. Please use PowerShell to check it, and you can run the command below:
Get-SPServiceApplication | where-object{$_.DisplayName -like 'User Profile*'}
Please ensure you are connecting to the correct farm, and open PowerShell with administrator permission. Meanwhile, add a test user in your Active Directory, and test to see whether the user's My Site can be created.
If the User Profile Service Application can be listed by PowerShell, and the new user's My Site can be created, there might be an UI issue in your Central Administration. Otherwise, you may consider to recreate or restore your User Profile Service Application.
Here are references:
https://technet.microsoft.com/en-us/library/gg985419.aspx
http://sharepoint.stackexchange.com/questions/55087/user-profile-service-application-unable-to-create-a-new-user-profile-service-ap
https://joanneklein.wordpress.com/2011/11/08/recreated-user-profile-service-application-deletes-user-profiles/
Thanks,
Reken Liu -
Issue with user exit ZXPADU01 and ZXPADU02
Hi,
I am trying to change the existing record for the info type 0015 for an employee in Pa30 transaction.
my requirement is i need old value and new value when i am changing the existing record in info type 0015.
When i kept break point in user exit ZXPADU01 it is not triggering it is triggering only when we creating the record.
i tried with user exit ZXPADU02 it is not working as per my requirement.
My requirement is :whenever i am changing the existing record(modifying record) i need old value and new value.
Anybody can suggest me how to fix this issue.
Thanks,
MaheedharDear Maheedhar,
The best way to achieve this requirement is to use the PAI user exit ZXPADU02 import parameter PSAVE. The PSAVE parameter contains the PBO original / initial record, before any changes take place.
The INNNN parameter contains the current PAI record as usual, in order to be used for customer check and new values. Thus, you've got both the old and the new record in place, and you can make your comparison according to the business requirements: -
Issue with user running Outlook on Windows XP
We are having an issue with many of our users who have had their sent items disappear from Outlook. We are running Exchange 2010 SP2 with Rollup 8. All users on Windows 7 appear to be working fine, it is just users on XP that are having the issue. All
PCs are SP3 with updates applied. The messages were there previously, but the Sent folder shows empty as of Monday. They show correctly in OWA, it is just in Outlook itself that is the problem. If we enable cached mode the items populate, but our standard
policy is to run online with no local PST. We have tried running Outlook with /clearviews and in Safe Mode, but this does not resolve the issue.Hi
Cached mode will use an OST file not a PST file.
If you remove the contents from the folder and add a new profile does it work? Are you planning on upgrade to SP3 on exchange 2010? -
ACS SE 4.1.1.23 patch 5 issue with users
HI There, I am facing very weired issue with ACS SE 4.1.1.23 patch 5. I am trying to add users in ACS it is added successfully but I can not see these users when I click list all users.
But I can see users are increasing in groups when I add users..but when I do list all users it say there are no users defined. and I tried to login with newly created users from devices ....I am able to login with those new users.....
also when I go to that particular group in which I added new users....and say list users in group...I get message from ACS saying that "can not read users from group" ....
what could be issue any one has any idea....customer complained that he was unable to login to devices...with the users created on ACS...when I saw there was no users in database....then I added 2-3 users by looking at old passed and failed authentication... but I dont know how users got deleted automatically...even I tried to see appliance audit logs...could not see any thing which indicates someone deleted users...
please help me to solve this issue..
ThanksIssue resolved. The CRL that was being parsed from the cert was one level higher than the CRL that needed to be checked. The User CRL was ppointing to the Intermediate CA's CRL. I had to manually change the URL from this:
http://DOMAINvmsp.DOMAIN.xxxx-xx.edu/pkipub/DOMAIN%20Intermediate%20CA%201.crl
to this:
http://DOMAINvmsp.DOMAIN.xxxx-xx.edu/pkipub/DOMAIN%20User%20CA%201.crl
Mark -
Variations issues with User & Group Site Column value
Hi all,
I have created variation sites. e.g. http://mydomain/en-us for english & http://mydomain/de-de for german language. I have created custom page layouts. This page layouts are based on custom content types. I have created a column called "User"
which is type of "User/Groups". I am registering this column to my page layout. http://mydomain/de-de is my default site.
Now I am editing column called "User" on page & save it. It saves data properly. But when I am propagating these changes to another site that is http://mydomain/en-us. It shows me all controls with values filled. but with "User"
column, its showing me blank value.
Any suggestion. ?
Thanks in advance.http://webcache.googleusercontent.com/search?q=cache:kNlxGIj5f1kJ:sjoere.blogspot.com/2007/11/5-reasons-why-you-should-not-use.html+&cd=2&hl=en&ct=clnk&gl=in
Content types not propagated
Risk
When you add a content type to a page library in the variation source, this type is not automatically propagated to the other labels (see
my previous post). If you then create a page with that content type in the variation source, it does get published to the other labels but loses its content type field values.
Proposed solutions
Set up your site via a site definition that already contains the proper content type bindings to the page libraries. All labels will use the same content types
Put a good governance plan in place to make sure manual changes are done in every label
If this helped you resolve your issue, please mark it Answered -
Role reconciliation issue with user ID in acting (HDA) position
Hi all,
I am experiencing an issue with my role reconciliation for user who is in a HDA (acting) position. This user has a 008 relationship to her own position and a A081 relationship to the position she is acting in. Roles are assigned to these 2 positions.
After the programme PFCG_TIME_DEPENDENCY has been run, I would assume the user to acquire the roles assigned to the HDA position and lose the roles assigned to her in her original position. However, this isn't the case.
I am just wondering whether anyone else has encountered this issue and know of a solution to this.
Thank you.
KimKim,
After the programme PFCG_TIME_DEPENDENCY has been run, I would assume the user to acquire the roles assigned to the HDA position and lose the roles assigned to her in her original position. However, this isn't the case.
Before PFUD takes place, change of assignment should be done in PA40(automatically or manually depending on your setup).
Thanks,
Sri -
Powershell : Issues with user input collection from Multiple InPutBox Form
I am having issues with getting user input to pass from a form that a user fills out into variables that I can then use in other methods and commands. (ex; SQL Query, SQL Data Add, ... )
I have attached the Powershell script I am using in it's designed form but I am having issues getting the DataCollection function to grab the content of the InputBox and send it to a variable for later use.
Note: I'm running this at this time from the ISE so I can actually see what is going on.
Any help would be appreciated.
DAS
[System.Reflection.Assembly]::LoadWithPartialName( “System.Windows.Forms”)
[System.Reflection.Assembly]::LoadWithPartialName( “Microsoft.VisualBasic”)
$FormDBA = New-Object System.Windows.Forms.Form
$FormDBA.Size = New-Object System.Drawing.Size(300,500)
$FormDBA.Text = "MIS Data"
$FormDBA.StartPosition = [System.Windows.Forms.FormStartPosition]::CenterScreen;
function DataCapture
$SubSID = $InBoxSID.text
ECHO $SubSID
$InBoxTxtSID = New-Object System.Windows.Forms.Label
$InBoxTxtSID.Location = New-Object System.Drawing.Size(25,15)
$InBoxTxtSID.Text = "Sticker ID : "
$InBoxSID = New-Object System.Windows.Forms.TextBox
$InBoxSID.Location = New-Object System.Drawing.Size(130,10)
$InBoxSID.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtUSR = New-Object System.Windows.Forms.Label
$InBoxTxtUSR.Location = New-Object System.Drawing.Size(25,55)
$InBoxTxtUSR.Text = "User Name ; "
$InBoxUSR = New-Object System.Windows.Forms.TextBox
$InBoxUSR.Location = New-Object System.Drawing.Size(130,50)
$InBoxUSR.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtPCN = New-Object System.Windows.Forms.Label
$InBoxTxtPCN.Location = New-Object System.Drawing.Size(25,95)
$InBoxTxtPCN.Text = "PC Name : "
$InBoxPCN = New-Object System.Windows.Forms.TextBox
$InBoxPCN.Location = New-Object System.Drawing.Size(130,90)
$InBoxPCN.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtDPT = New-Object System.Windows.Forms.Label
$InBoxTxtDPT.Location = New-Object System.Drawing.Size(25,135)
$InBoxTxtDPT.Text = "Department : "
$InBoxDPT = New-Object System.Windows.Forms.TextBox
$InBoxDPT.Location = New-Object System.Drawing.Size(130,130)
$InBoxDPT.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtPCT = New-Object System.Windows.Forms.Label
$InBoxTxtPCT.Location = New-Object System.Drawing.Size(25,175)
$InBoxTxtPCT.Text = "PC Type : "
$InBoxPCT = New-Object System.Windows.Forms.TextBox
$InBoxPCT.Location = New-Object System.Drawing.Size(130,170)
$InBoxPCT.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtMAK = New-Object System.Windows.Forms.Label
$InBoxTxtMAK.Location = New-Object System.Drawing.Size(25,215)
$InBoxTxtMAK.Text = "Make : "
$InBoxMAK = New-Object System.Windows.Forms.TextBox
$InBoxMAK.Location = New-Object System.Drawing.Size(130,210)
$InBoxMAK.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtMOD = New-Object System.Windows.Forms.Label
$InBoxTxtMOD.Location = New-Object System.Drawing.Size(25,255)
$InBoxTxtMOD.Text = "Model : "
$InBoxMOD = New-Object System.Windows.Forms.TextBox
$InBoxMOD.Location = New-Object System.Drawing.Size(130,250)
$InBoxMOD.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtOPS = New-Object System.Windows.Forms.Label
$InBoxTxtOPS.Location = New-Object System.Drawing.Size(25,295)
$InBoxTxtOPS.Text = "O.S. : "
$InBoxOPS = New-Object System.Windows.Forms.TextBox
$InBoxOPS.Location = New-Object System.Drawing.Size(130,290)
$InBoxOPS.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtDIS = New-Object System.Windows.Forms.Label
$InBoxTxtDIS.Location = New-Object System.Drawing.Size(25,335)
$InBoxTxtDIS.Text = "Disposed : "
$InBoxDIS = New-Object System.Windows.Forms.TextBox
$InBoxDIS.Location = New-Object System.Drawing.Size(130,330)
$InBoxDIS.Size = New-Object System.Drawing.Size(120,20)
$button = New-Object System.Windows.Forms.Button
$button.Location = New-Object System.Drawing.Size(150,400)
$button.Width = 100
$button.Text = “Ok”
$button.Add_Click({DataCapture})
$FormDBA.Controls.Add($button)
$FormDBA.Controls.Add($InBoxTxtSID)
$FormDBA.Controls.Add($InBoxTxtUSR)
$FormDBA.Controls.Add($InBoxTxtPCN)
$FormDBA.Controls.Add($InBoxTxtDPT)
$FormDBA.Controls.Add($InBoxTxtPCT)
$FormDBA.Controls.Add($InBoxTxtMAK)
$FormDBA.Controls.Add($InBoxTxtMOD)
$FormDBA.Controls.Add($InBoxTxtOPS)
$FormDBA.Controls.Add($InBoxTxtDIS)
$FormDBA.Controls.Add($InBoxSID)
$FormDBA.Controls.Add($InBoxUSR)
$FormDBA.Controls.Add($InBoxPCN)
$FormDBA.Controls.Add($InBoxDPT)
$FormDBA.Controls.Add($InBoxPCT)
$FormDBA.Controls.Add($InBoxMAK)
$FormDBA.Controls.Add($InBoxMOD)
$FormDBA.Controls.Add($InBoxOPS)
$FormDBA.Controls.Add($InBoxDIS)
$FormDBA.ShowDialog()Change this:
$button = New-Object System.Windows.Forms.Button
$button.Location = New-Object System.Drawing.Size(150,400)
$button.Width = 100
$button.Text = “Ok”
$button.DialogResult='Ok' #<<<<<-------
#$button.Add_Click({DataCapture})
Remove function andrun like this:
if('Ok' -eq $FormDBA.ShowDialog()){
$FormDBA.Controls|%{$_.Text}
With names you can get values by control name.
¯\_(ツ)_/¯
This suggestion works for the purpose I needed.
If I could, I would attach the file instead of pasting the script so you can see what all I am using this to do.
But in short, we have a main form we use to pull records from a database and call up an application at the click of a button for remote assistance. However, we seem to now need the ability to have this application to edit and add new records into said
database. That's where this second form came in and also when I hit my issue with the information capture.
At this time I'm getting this to format the information collected so that I can start using using it with SQL commands. -
Wss3 Issues with user check in files from within excel or word 2010
I have got a user reporting that he is experiencing (and it is getting more and more often) that when a file is checked out in excel or word, he then edit it, followed by clicking check in on the File tab within either excel or word. He then gets error see
image below.
Just wonder if anyone has seen this before? and where do I start...?
i have checked the site collection is about 12 GB in size, there are quite a few subsites in the area where this user is working, there are about 150 subsites, 3 levels... our wss3 version is 12.0.0.4621Yesterday I just had another user report the similar issue with with office complaining that the file was not checked out therefor upload (check-in) was failed.
Please see the version and build number of MS Office
Forgot to say, we are all on the same release and updates for MS Office as well as IE. -
Issue with users accessing video card and /dev/nvram
Hello,
I have Lenovo x60s and i can't access with normal user (group users) the file
/dev/nvram
ever I restart de computer have execute "chmod 777 /dev/nvram" for fallowing access for users
and with users i can't use video i810 alone use vesa
with root i can use driver i810 on xorg, why??
I don't understand?!?!?!The problem with my video is with root i can play games 3D, with users i can't, my config video card on xorg:
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "vesa" ---->> Now I write "VESA", while I write i810 i can't execute "startx" with normal user
VendorName "Intel Corporation"
BoardName "Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
the /dev/nvram is device when i use especial keys of keyboard on my notebook,
ever restart my pc the permissions change, I have execute "chmod 777 /dev/nvram" else i can't use with normal user.
i think the udev always create this device on start and always create with the permission alone read and write for root, but I just find that the group is kmen and I add my user in the group.
I restart system and verify the result. -
Issue with user mapping and SAP reference system
Hello Gurus,
I have this strange system behaviour when preparing my system for single sign-on using user mapping.
Case 1.
In the user management property category, I have the following defined.
Authentication Ticket Type - SAP Logon Ticket
Logon Method - UIDPW
User Mapping Fields -
User Mapping Type - admin, user
In the alias editor, I defined the default alias as SAP_PRD
Result= when I go to identity management to assign the reference system (the default alias - SAP_PRD)...I do not see the system alias there.
Case 2:
In the user management property category, I have the following defined
Authentication Ticket Type - SAP Logon Ticket
Logon Method - SAPLOGONTICKET
User Mapping Fields -
User Mapping Type - admin, user
In the alias editor, I defined the default alias as SAP_DEV
Result, when I go to the identity management to assign the refernce system (the default alias - SAP_DEV), I see it there.
What might be my issue? Does it mean I can't assign SAP reference if I am using UIDPW as logon method?
Please help me.Hi Mahesh,
Thanks for the feedback. I am relatively new to EP...so please I won't mind if you can guide me on how to go about this.
This is what I did...
I chose System Administration > Permissions
In the PCD, I located my system with the alias, SAP_PRD
It opened up the permission assignment area.
Now I have these permissions set
Administrator - Full Control
Administrators - Full control
com.sap.caf.eu.gp.roles.superuser - Full control
Everyone (built in group) - Full control
Everyone (Everyone role)- Full control
super_admin_role - Owner
For all the above End User box is checked.
I can't find anyone end user group .
Once I pick UIDPW, the alias disapperars from the reference system list.
Please help. -
ALRTCATDEF issue with user Mail ID
I am facing an issue. We know that when we create Alerts in PI in ALRTCATDEF and create Rules in RWB for the category created in ALRTCATDEF the mail generated to the fixed recipients would be from the user PIRWBUSER(The user who has been maintained in the RFC destination u201CCentralMonitoringServer-XIAlertsu201D.).
My issue is that the Alert mails that I am receiving is not from PIRWBUSER and is from a Personal Mail ID (Manoj.123@****.com) despite the user maintained in the RFC u201CCentralMonitoringServer-XIAlertsu201D is PIRWBUSER.
I have checked the user in SUO1 and confirmed the mail ID and no where i am able to find this user maintained from where the ALERT mails can be triggered from this mail ID (Manoj.123@****.com).
Can you please help me with this and let me know where all the user ID is maintained from whou2019s ID the ALERT mails are triggered in the ALERT configuration apart from the RFC u201CCentralMonitoringServer-XIAlertsu201D .Hello,
Check the user PIRWBUSER in SU01.
It seems the address Manoj.123@****.com is set for this user.
Regards,
Diego Estanguini Gabriel -
Having issues with users accounts
When I log in , any application that I try to log into, I have to right click on it and select RUN AS ADMINISTRATOR, this doesn't matter what account I am in. I also just got locked out of my administrator account. It told me user profile
not available.
How can I fix this?Hi Jcc1128,
When did the issue start to occur ?Have you made any modifications to the machine ?
Have you tried to create another administrator account and login with it to have a check ?
Please open an administrator command line and run the following command line to enable the built-in administrator account .Then login with this account to have a check .
"net user administrator /active:yes"
If the issue has gone ,the present account profile may have corrupted .Please refer to the following link to fix the corrupted user profiles .
Fix a corrupted user profile
http://windows.microsoft.com/en-hk/windows/fix-corrupted-user-profile#1TC=windows-7
After we resolved the issue ,please run "net user administrator /active:no" to disable the built-in account .
If there is something wrong with the built-in account profile ,the isssue may be worse.We can run "sfc /scannow" to have a check of the system files` health firstly. Just as S.Sengupta suggested , we also can try a system restore .
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Maybe you are looking for
-
ITunes Plus Upgrade--No help from iTunes Support
I appologize for this lengthy post. Believe me I have more to the story, but want to keep it as short as possible. Bottom line is I'm looking for help with iTunes plus upgrade please. My specific problem is getting customer support to upgrade my old
-
hi , i need to update one field : ind_sign to value : Y . based on the value from other table . i am getting ora-01427 error . please help in fixing this. update reg a set a.ind_sign = ( select 'Y' from reg b, attach c where b.key = c.key and c.cde =
-
I am having an issue with BB 8830 World Edition and not displaying every powerpoint file. Seems that files of 150Mb or smaller display just fine and I can not find anything that states this is an issue anywhere else. It does not matter if you open
-
I received errorcode U44M2P6 while trying to apply an update patch to Photoshop CS6 (13.0.1.1). Please advice.
-
Is there any API to search for an item in PIM. I have a requirement to search for item by Inventory Org, routing class, operation class and resource. thank satya