Issue with Users trying to contribute a file to content server

Hi,
I have an instance of UCM 10g 10.1.3.3 installed and off later suddenly some users have started getting the message "Unable to build check in form. User '<username>' does not have sufficient privileges." when they try to checkin a file.
I checked the user admin to see these users previliges and they seem fine. I mean they have RW previliges on the group.
When the user logs into the system they cannot see the "New Checkin" option which is also strange.
Here is what got recorded in the content server log file..
Event generated by user '<username>' at host 'orclinsight.oraclecorp.com'. Content item <undefined> was not successfully checked in. User '<username>' does not have sufficient privileges. [ Details ]
An error has occurred. The stack trace below shows more information.
!csUserEventMessage,[email protected],orclinsight.oraclecorp.com!$!csUnableToCheckIn,!csUserInsufficientAccess,[email protected]
intradoc.common.ServiceException: !csUnableToCheckIn,!csUserInsufficientAccess,[email protected]
     at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:1739)
     at intradoc.server.Service.buildServiceException(Service.java:1999)
     at intradoc.server.Service.createServiceExceptionEx(Service.java:1993)
     at intradoc.server.ServiceSecurityImplementor.validateSecurityPrivilegeLevel(ServiceSecurityImplementor.java:956)
     at intradoc.server.DocumentAccessSecurity.checkSecurity(DocumentAccessSecurity.java:114)
     at intradoc.server.DocumentAccessSecurity.checkSecurity(DocumentAccessSecurity.java:67)
     at intradoc.server.ServiceSecurityImplementor.checkSecurity(ServiceSecurityImplementor.java:320)
     at intradoc.server.Service.checkSecurity(Service.java:2546)
     at intradoc.server.Service.checkSecurity(Service.java:2524)
     at sun.reflect.GeneratedMethodAccessor23.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:461)
     at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:128)
     at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:113)
     at intradoc.server.Service.doCodeEx(Service.java:505)
     at collections.CollectionUserHandler.checkSecurity(CollectionUserHandler.java:1058)
     at sun.reflect.GeneratedMethodAccessor12.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:461)
     at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:142)
     at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:75)
     at intradoc.server.Service.doCodeEx(Service.java:488)
     at intradoc.server.Service.doCode(Service.java:470)
     at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1350)
     at intradoc.server.Service.doAction(Service.java:450)
     at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1191)
     at intradoc.server.Service.doActions(Service.java:445)
     at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1111)
     at intradoc.server.Service.executeActions(Service.java:431)
     at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:632)
     at intradoc.server.Service.doRequest(Service.java:1709)
     at intradoc.server.ServiceManager.processCommand(ServiceManager.java:357)
     at intradoc.server.IdcServerThread.run(IdcServerThread.java:195)
Any help will be much appreciated.
Thanks

Yes Tim is correct. Support would say that any direct changes to the DB layer without the CS services layer doing it would not be supported. Only in rare cases where development tells support to do otherwise are direct DB level edits supported.
So approaching the external users getting the correct security as a problem; support would probably suggest something like use the proxycredentialsmap component to map your security from the SSO application to the proper roles in the CS instead of using scripts to create local users and map them manually. Or create the users one time at beginning of the project (using your db level edits to create users and give them roles etc) and test to see if it works and do no integration with a SSO application that can change your users and mess up your plans later.
I would guess that a one time creation of users via script in the CS would be no real problem to support but anything dynamic and coded that would have to be debugged would be a problem. Custom code (even simple custom code in a workflow or profile) is not directly supported. Too big of a pandora's box being opened.

Similar Messages

Issue with users trying to save reports to thier Documents on one drive.

I am working
on a 2013 SharePoint environment and users who use Power View reports. I
have a user who can create reports on a site I have set up (no problems
there). They can also save reports to PowerPivot Gallery they have added
in their Newsfeed for their personal site (no problems here). The problem
is when they try to save the report and go to Documents on one Drive it fails
with below error message. I am an admin but can save just fine to my
documents. I know the error shows an access issue but not sure where or
how to resolve this issue for users. <o:p></o:p>
P.S. the
issue happens before they even save button it happens when they see the My
Documents and try to open it. Again it is there personal SharePoint site
so not sure why they would not have access.<o:p></o:p>
SoapAction: ListChildren
HttpStatus: 500
ServerErrorCode: rsAccessDenied
ServerError: <detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsAccessDenied</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">The permissions granted to user 'HQEAGLEVIEW\levi.bond' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException:
The permissions granted to user 'HQEAGLEVIEW\levi.bond' are insufficient for performing this operation.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsAccessDenied&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3412.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3412.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message
msrs:ErrorCode="rsAccessDenied" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsAccessDenied&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3412.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">The permissions granted to user 'HQEAGLEVIEW\levi.bond' are insufficient for performing this operation.</Message></MoreInformation><Warnings
xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
here is actual screen shot
<v:shapetype coordsize="21600,21600" filled="f" id="_x0000_t75" o:preferrelative="t" o:spt="75" path="m@4@5l@4@11@9@11@9@5xe" stroked="f">
<v:stroke joinstyle="miter">
<v:formulas>  <v:f eqn="if lineDrawn pixelLineWidth 0">
  <v:f eqn="sum @0 1 0">
  <v:f eqn="sum 0 0 @1">
  <v:f eqn="prod @2 1 2">
  <v:f eqn="prod @3 21600 pixelWidth">
  <v:f eqn="prod @3 21600 pixelHeight">
  <v:f eqn="sum @0 0 1">
  <v:f eqn="prod @6 1 2">
  <v:f eqn="prod @7 21600 pixelWidth">
  <v:f eqn="sum @8 21600 0">
  <v:f eqn="prod @7 21600 pixelHeight">
  <v:f eqn="sum @10 21600 0">
</v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:formulas>
<v:path gradientshapeok="t" o:connecttype="rect" o:extrusionok="f">
<o:lock aspectratio="t" v:ext="edit">
</o:lock></v:path></v:stroke></v:shapetype><v:shape alt="" id="Picture_x0020_1" o:spid="_x0000_i1025" style="width:7in;height:426.75pt;" type="#_x0000_t75">
<v:imagedata o:href="cid:[email protected]" src="file:///C:\Users\KEN~1.CRA\AppData\Local\Temp\msohtmlclip1\01\clip_image001.png">
</v:imagedata></v:shape>
Ken Craig

Hi Ken,
It's strange that the User Profile Service Application is not available there. Please use PowerShell to check it, and you can run the command below:
Get-SPServiceApplication | where-object{$_.DisplayName -like 'User Profile*'}
Please ensure you are connecting to the correct farm, and open PowerShell with administrator permission. Meanwhile, add a test user in your Active Directory, and test to see whether the user's My Site can be created.
If the User Profile Service Application can be listed by PowerShell, and the new user's My Site can be created, there might be an UI issue in your Central Administration. Otherwise, you may consider to recreate or restore your User Profile Service Application.
Here are references:
https://technet.microsoft.com/en-us/library/gg985419.aspx
http://sharepoint.stackexchange.com/questions/55087/user-profile-service-application-unable-to-create-a-new-user-profile-service-ap
https://joanneklein.wordpress.com/2011/11/08/recreated-user-profile-service-application-deletes-user-profiles/
Thanks,
Reken Liu

Issue with User decision handler in UWL

Hi Friends,
I am facing an issue with user decision hander in UWL. We have modified the XML file to show up the comments box to enter the rejection reason, this is working fine with two approval tasks already but the same thing is not working now with a new task id. In the back end(R/3) everything is the same for both the tasks, in the Portal side my portal consultant says the same. But we were not able to figure out the issue. I even created a new task and tried to use implement the handler changes, but still it is not working. Please advice what could be the issue

Hi,
can you elaborate what the issue, what do you mean by not working. you are not getting the reason box, or it's giving error,something like that.
Hope we'll be more clear then about your requirement.
venu

WPF Crystal report throws an exception when user tries to replace a file which is open during export of report.

I am using the latest version of crystal report CRforVS_13_0_10 with Visual Studio 2013.
I am working a WPF application and using the WPF crystalreportviewer control.
The steps to reproduce the exception is ,
1) Create a report.
2) Export report with sample.xls as file name
3) Now open the sample.xls file in Excel
4) Again export the report with sample.xls as file name
5) There is dialog which asks "Do you want to replace existing file sample.xls"
6)Click "Yes"
7) Now the exception will be thrown.
This is System.IO.IOException which is thrown by crystal report when user tries to save the file which is already opened by user. Also there is no event provided to handle Export_click for WPF CrystalReportViewer where I can handle this.

I can replicate the issue. Not sure how we can hook into the System.IO process to capture the exception. I have not played with that part yet...
I created my own export button and wrapped it in a try/catch and this is what I get:
Which is what you would expect rather than a Null Exception error:
We'll have to do more testing to see how or if System IO errors can caught outside of CR.
Don

I am having an installation failure issue with my itunes 11 software. File is corrupted and i don't know what to do. I've un-install and re-installed the software three times and continue to get the same error message. It states that "This copy of ITun

I am having an installation failure issue with my itunes 11 software. File is corrupted and i don't know what to do. I've un-install and re-installed the software three times and continue to get the same error message. It states that "This copy of ITunes is corrupted or is not installed correctly. Please reinstall Itunes"
iMac, iOS 6

HI,
If your old version of iTunes is still working - then I sugest you stick with that.
iTunes 11 is a lousy update - It will not retain your playlists, you can't find and delete duplicates... and a whole arry of oyher issues. (have a look around this forum to see how many issues IT11 gives people)
Just a friendly advise and warning :-)

Get files from Content server to Application server

I want to Get few files from Content server to Application server, I have the required Archive ID. It is a HTTP Content server type. Can you please suggest the suitable method for this.
Thanks
Purna

> I am new to SDN and SAP XI, can anyone tell me whether its possible to move the files (different strcuture files i.e. some are master data files and some are transaction data file) from FTP server to Application server with one interface.
Hello Bob,
Yes it is possible.
There can be two ways of doing it.
1. N:1 mapping, BPM will require for this.
N:1 Mapping refer this blog
IDOCs (Multiple Types) Collection in BPM
BpmPatterns CollectMerge
part1 BPM with Patterns explained Part-1
part2 BPM with Patterns explained Part-2
Second option
Create 3 scanarios in integration directory and correspondingly in integration repositoy create different data types, message types, mappings & interface mappings and then in each of scenario us different message interface and interface mapping.
> I know that if we create new configuration it will work but I question is does master data interface picks this transaction data file also.
>
If you are using N:1 scenario then use *.csv in your sender adapter under file name parameter and then all the files will be picked up from same directory.
If you are using second option (3 different scenarios) then also you can pick the different files from same directory. You will be having 3 sender adapters in this case, So, one for picking master data, and another for product data and the last one for transaction data.
So, in case of master data use "plant_*.csv" as a file name and directory name.
In case of product data, use "product_*.csv " as a file name and source directory will remain same.
similarly do it for transaction data.
So by this way all 3 sender adapters will perform their job to pick the different files from same source directory.
Regards,
Sarvesh

Copy any kind of file from content server to network directory

Helli All
The question:
I nee to copy any kind of file from content server to any network directory.
Explanation
1. transaction CV02N
2. There is attached file for a document in tab "Document data/Original"
3. This file stored in content server
4. I wrote program code that creates path of the stored file that finally looks like
http://cont:8888/ContentServer.dll?get&Version=.....*...&compid=app1.doc
where app1.doc is file's name and I have to copy this file into network directory.
The problem is that this URL open the file instead of just pointing to him
so that no function or method can't see this file and as the result I got message that
the file doesn\t exist.
Please, advice.
Regards,
Daniel.

many many thanks for ur help. i really did not check the URLClassLoader properly.
but i would like to hear a little more from u. i have another question. here in this code (provided earlier), i searched for attribute values in the manifest file, then again i load the required class file from the very url. is it not good to retrieve the whole jar file first, and then check attribute values inside manifest file and load the required class files from that jar file that is already downloaded without going to that url again? how can i do this?

BAPI for copying a file to Content Server

We have a scenario where we need to transfer a file into Content Server, create a link to the document in Content Server to a tcode through ArchiveLink, and create a link to the document in Content Server through a third-part application.
Is there a BAPI or RFC that takes the document as input and returns a link to the document in Content Server?

hi,
Castillo,
1. consider manual linking.
a.when we uploade original file to DMS ie tc-CV01N through data carrier as 'PC' for front end, which is prerequisit for
identifiying original file path.
b. Now whil saving DIR, we need to Check in to secure storage, ie, using Storage category, ex DMS_C1_ST. this will save as document as logical document. here interesting is acuall phisical conten is stored in Conten server as your case ex Z_DMS.
So SAP DMS is made for Secure storing of originals.
Q?is, how to pass PATHS for this during Uploading, using tools ex LSMW.
In LSMW we can upload originals to DMS.
but i don't know it works for Archive linking.
Benakaraja

Wss3 Issues with user check in files from within excel or word 2010

I have got a user reporting that he is experiencing (and it is getting more and more often) that when a file is checked out in excel or word, he then edit it, followed by clicking check in on the File tab within either excel or word. He then gets error see
image below.
Just wonder if anyone has seen this before? and where do I start...?
i have checked the site collection is about 12 GB in size, there are quite a few subsites in the area where this user is working, there are about 150 subsites, 3 levels... our wss3 version is 12.0.0.4621

Yesterday I just had another user report the similar issue with with office complaining that the file was not checked out therefor upload (check-in) was failed.
Please see the version and build number of MS Office
Forgot to say, we are all on the same release and updates for MS Office as well as IE.

Issue with user running Outlook on Windows XP

We are having an issue with many of our users who have had their sent items disappear from Outlook. We are running Exchange 2010 SP2 with Rollup 8. All users on Windows 7 appear to be working fine, it is just users on XP that are having the issue. All
PCs are SP3 with updates applied. The messages were there previously, but the Sent folder shows empty as of Monday. They show correctly in OWA, it is just in Outlook itself that is the problem. If we enable cached mode the items populate, but our standard
policy is to run online with no local PST. We have tried running Outlook with /clearviews and in Safe Mode, but this does not resolve the issue.

Hi
Cached mode will use an OST file not a PST file.
If you remove the contents from the folder and add a new profile does it work? Are you planning on upgrade to SP3 on exchange 2010?

Lion server file sharing issue with windows API read/write ini file (GetPrivateProfileString)

Hello,
I try to config lion server as file server for a windows application we use at work. All other computers are windows 7 or XP, lion server is the only mac. I choose lion server because it's size, quality and personal love of apple products.
10.7.2 lion server's samba file sharing works almost perfectly with all my windows machines, I can copy, delete, modify any text files or office files without any issue, but the most important windows application for my business doesn't work with samba file sharing. After some digging, I found it is because windows program can't read or write INI file stored on lion share. Windows API GetPrivateProfileString always returns empty if the INI file is store on lion share.
You can download a small application for read/write windows INI file from codeproject.com to test this problem:
http://www.codeproject.com/KB/files/ini.aspx
I can open/edit the in file using any text editor without any problem. The only problem is with those windows APIs. ACL is turned on for my lion share and assigned "delete" rights to samba users.
I install samba3 on the same server; it works perfectly with windows API. My windows program also works. Looks like there is something wrong with lion server's sambax.
I'd prefer to use built-in samba even I have samba3 working. Built-in samba is very immature right now, but considered how young it is, I will give apple some time to make it mature.
Does anyone have same issue or knows how to fix it?
Thanks,
Michael.

All the memory is fine. The server rarely if ever goes down when there are only around 10-12 users connected. When there are 20+ users connected and working heavily it goes down often. When I say working heavily, I mean they are transferring huge files to the SAN (100GB+), sometimes 5 at a time per user, and there are a bunch of others who are reading large video files at a minimum of 220MB/sec from the SAN.
Though this worked on Snow Leopard without any issues, Lion just doesn't seem to be able to handle it. The odd thing is, on Snow Leopard there was only a single 1GB ethernet connection to a NAS system, whereas with Lion we have a much more powerful machine with a 6-port 10GB ethernet card and a 4 lane 8GB fiber card to a true SAN. You would think that the newer scenario with Lion would handle far more users with ease.
So far, very disappointing with regards to Lion's file serving performance.

Issue with user exit ZXPADU01 and ZXPADU02

Hi,
I am trying to change the existing record for the info type 0015 for an employee in Pa30 transaction.
my requirement is i need old value and new value when i am changing the existing record in info type 0015.
When i kept break point in user exit ZXPADU01 it is not triggering it is triggering only when we creating the record.
i tried with user exit ZXPADU02 it is not working as per my requirement.
My requirement is :whenever i am changing the existing record(modifying record) i need old value and new value.
Anybody can suggest me how to fix this issue.
Thanks,
Maheedhar

Dear Maheedhar,
The best way to achieve this requirement is to use the PAI user exit ZXPADU02 import parameter PSAVE. The PSAVE parameter contains the PBO original / initial record, before any changes take place.
The INNNN parameter contains the current PAI record as usual, in order to be used for customer check and new values. Thus, you've got both the old and the new record in place, and you can make your comparison according to the business requirements:

ACS SE 4.1.1.23 patch 5 issue with users

HI There, I am facing very weired issue with ACS SE 4.1.1.23 patch 5. I am trying to add users in ACS it is added successfully but I can not see these users when I click list all users.
But I can see users are increasing in groups when I add users..but when I do list all users it say there are no users defined. and I tried to login with newly created users from devices ....I am able to login with those new users.....
also when I go to that particular group in which I added new users....and say list users in group...I get message from ACS saying that "can not read users from group" ....
what could be issue any one has any idea....customer complained that he was unable to login to devices...with the users created on ACS...when I saw there was no users in database....then I added 2-3 users by looking at old passed and failed authentication... but I dont know how users got deleted automatically...even I tried to see appliance audit logs...could not see any thing which indicates someone deleted users...
please help me to solve this issue..
Thanks

Issue resolved. The CRL that was being parsed from the cert was one level higher than the CRL that needed to be checked. The User CRL was ppointing to the Intermediate CA's CRL. I had to manually change the URL from this:
http://DOMAINvmsp.DOMAIN.xxxx-xx.edu/pkipub/DOMAIN%20Intermediate%20CA%201.crl
to this:
http://DOMAINvmsp.DOMAIN.xxxx-xx.edu/pkipub/DOMAIN%20User%20CA%201.crl
Mark

Powershell : Issues with user input collection from Multiple InPutBox Form

I am having issues with getting user input to pass from a form that a user fills out into variables that I can then use in other methods and commands. (ex; SQL Query, SQL Data Add, ... )
I have attached the Powershell script I am using in it's designed form but I am having issues getting the DataCollection function to grab the content of the InputBox and send it to a variable for later use.
Note: I'm running this at this time from the ISE so I can actually see what is going on.
Any help would be appreciated.
DAS
[System.Reflection.Assembly]::LoadWithPartialName( “System.Windows.Forms”)
[System.Reflection.Assembly]::LoadWithPartialName( “Microsoft.VisualBasic”)
$FormDBA = New-Object System.Windows.Forms.Form
$FormDBA.Size = New-Object System.Drawing.Size(300,500)
$FormDBA.Text = "MIS Data"
$FormDBA.StartPosition = [System.Windows.Forms.FormStartPosition]::CenterScreen;
function DataCapture
$SubSID = $InBoxSID.text
ECHO $SubSID
$InBoxTxtSID = New-Object System.Windows.Forms.Label
$InBoxTxtSID.Location = New-Object System.Drawing.Size(25,15)
$InBoxTxtSID.Text = "Sticker ID : "
$InBoxSID = New-Object System.Windows.Forms.TextBox
$InBoxSID.Location = New-Object System.Drawing.Size(130,10)
$InBoxSID.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtUSR = New-Object System.Windows.Forms.Label
$InBoxTxtUSR.Location = New-Object System.Drawing.Size(25,55)
$InBoxTxtUSR.Text = "User Name ; "
$InBoxUSR = New-Object System.Windows.Forms.TextBox
$InBoxUSR.Location = New-Object System.Drawing.Size(130,50)
$InBoxUSR.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtPCN = New-Object System.Windows.Forms.Label
$InBoxTxtPCN.Location = New-Object System.Drawing.Size(25,95)
$InBoxTxtPCN.Text = "PC Name : "
$InBoxPCN = New-Object System.Windows.Forms.TextBox
$InBoxPCN.Location = New-Object System.Drawing.Size(130,90)
$InBoxPCN.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtDPT = New-Object System.Windows.Forms.Label
$InBoxTxtDPT.Location = New-Object System.Drawing.Size(25,135)
$InBoxTxtDPT.Text = "Department : "
$InBoxDPT = New-Object System.Windows.Forms.TextBox
$InBoxDPT.Location = New-Object System.Drawing.Size(130,130)
$InBoxDPT.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtPCT = New-Object System.Windows.Forms.Label
$InBoxTxtPCT.Location = New-Object System.Drawing.Size(25,175)
$InBoxTxtPCT.Text = "PC Type : "
$InBoxPCT = New-Object System.Windows.Forms.TextBox
$InBoxPCT.Location = New-Object System.Drawing.Size(130,170)
$InBoxPCT.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtMAK = New-Object System.Windows.Forms.Label
$InBoxTxtMAK.Location = New-Object System.Drawing.Size(25,215)
$InBoxTxtMAK.Text = "Make : "
$InBoxMAK = New-Object System.Windows.Forms.TextBox
$InBoxMAK.Location = New-Object System.Drawing.Size(130,210)
$InBoxMAK.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtMOD = New-Object System.Windows.Forms.Label
$InBoxTxtMOD.Location = New-Object System.Drawing.Size(25,255)
$InBoxTxtMOD.Text = "Model : "
$InBoxMOD = New-Object System.Windows.Forms.TextBox
$InBoxMOD.Location = New-Object System.Drawing.Size(130,250)
$InBoxMOD.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtOPS = New-Object System.Windows.Forms.Label
$InBoxTxtOPS.Location = New-Object System.Drawing.Size(25,295)
$InBoxTxtOPS.Text = "O.S. : "
$InBoxOPS = New-Object System.Windows.Forms.TextBox
$InBoxOPS.Location = New-Object System.Drawing.Size(130,290)
$InBoxOPS.Size = New-Object System.Drawing.Size(120,20)
$InBoxTxtDIS = New-Object System.Windows.Forms.Label
$InBoxTxtDIS.Location = New-Object System.Drawing.Size(25,335)
$InBoxTxtDIS.Text = "Disposed : "
$InBoxDIS = New-Object System.Windows.Forms.TextBox
$InBoxDIS.Location = New-Object System.Drawing.Size(130,330)
$InBoxDIS.Size = New-Object System.Drawing.Size(120,20)
$button = New-Object System.Windows.Forms.Button
$button.Location = New-Object System.Drawing.Size(150,400)
$button.Width = 100
$button.Text = “Ok”
$button.Add_Click({DataCapture})
$FormDBA.Controls.Add($button)
$FormDBA.Controls.Add($InBoxTxtSID)
$FormDBA.Controls.Add($InBoxTxtUSR)
$FormDBA.Controls.Add($InBoxTxtPCN)
$FormDBA.Controls.Add($InBoxTxtDPT)
$FormDBA.Controls.Add($InBoxTxtPCT)
$FormDBA.Controls.Add($InBoxTxtMAK)
$FormDBA.Controls.Add($InBoxTxtMOD)
$FormDBA.Controls.Add($InBoxTxtOPS)
$FormDBA.Controls.Add($InBoxTxtDIS)
$FormDBA.Controls.Add($InBoxSID)
$FormDBA.Controls.Add($InBoxUSR)
$FormDBA.Controls.Add($InBoxPCN)
$FormDBA.Controls.Add($InBoxDPT)
$FormDBA.Controls.Add($InBoxPCT)
$FormDBA.Controls.Add($InBoxMAK)
$FormDBA.Controls.Add($InBoxMOD)
$FormDBA.Controls.Add($InBoxOPS)
$FormDBA.Controls.Add($InBoxDIS)
$FormDBA.ShowDialog()

Change this:
$button = New-Object System.Windows.Forms.Button
$button.Location = New-Object System.Drawing.Size(150,400)
$button.Width = 100
$button.Text = “Ok”
$button.DialogResult='Ok' #<<<<<-------
#$button.Add_Click({DataCapture})
Remove function andrun like this:
if('Ok' -eq $FormDBA.ShowDialog()){
$FormDBA.Controls|%{$_.Text}
With names you can get values by control name.
¯\_(ツ)_/¯
This suggestion works for the purpose I needed.
If I could, I would attach the file instead of pasting the script so you can see what all I am using this to do.
But in short, we have a main form we use to pull records from a database and call up an application at the click of a button for remote assistance. However, we seem to now need the ability to have this application to edit and add new records into said
database. That's where this second form came in and also when I hit my issue with the information capture.
At this time I'm getting this to format the information collected so that I can start using using it with SQL commands.

Performance Issues with large XML (1-1.5MB) files

Hi,
I'm using an XML Schema based Object relational storage for my XML documents which are typically 1-1.5 MB in size and having serious performance issues with XPath Query.
When I do XPath query against an element of SQLType varchar2, I get a good performance. But when I do a similar XPath query against an element of SQLType Collection (Varray of varchar2), I get a very ordinary performance.
I have also created indexes on extract() and analyzed my XMLType table and indexes, but I have no performance gain. Also, I have tried all sorts of storage options available for Collections ie. Varray's, Nested Tables, IOT's, LOB's, Inline, etc... and all these gave me same bad performance.
I even tried creating XMLType views based on XPath queries but the performance didn't improve much.
I guess I'm running out of options and patience as well.;)
I would appreciate any ideas/suggestions, please help.....
Thanks;
Ramakrishna Chinta

Are you having similar symptoms as I am? http://discussions.apple.com/thread.jspa?threadID=2234792&tstart=0

Issue with Users trying to contribute a file to content server

Similar Messages

Maybe you are looking for