Issue with video footage in Flash Pro 8

Hi everyone! I'm in the process of making a video reel flash
animation and I'm experiencing a problem. The animation itself
loops continuously and seamlessly, but the videos inside the
animation do not. Each video is about 17 seconds long, so once the
animation reaches the 17 second mark, the videos stop playing. Only
the first frame from each video shows up while the rest of the
animation keeps going!
ANY thoughts or suggestions on how to get the videos
themselves to loop would be very much appreciated.
By the way, I turned the videos into a movie clip symbol in
order to get the infinite scrolling effect (refer to
http://www.kirupa.com/developer/mx/infinite.htm).
Maybe this can't be done successfully with actual video footage?
Thanks!
Nicole

Get it out of the movieclip - start over its easier...
Give the component an instance name like vid and use this
code on the frame it sits on:
var vidList : Object = new Object();
vidList.complete = function() {
vid.play();
vid.addEventListener ("complete",vidList);

Similar Messages

  • Issue with video playback in Flash Player

    I am currently doing some voluntary work for my mom for the local branch of the Alzheimer Foundation. Now I have encoded a video to mpeg4/h.264 and F4V using the Adobe Media Encoder only I am having not much luck to get it successfully played. Now is my question what could I be doing wrong? I already tried to use ActionScript 2 and 3 and disabled GZIP compression on the server and even tried different files like H.264 and F4V.
    The strange thing is that the video always work just fine when being tested in Flash CS4 10.2 but when I tried it in the browser it fails. The Test Movie feature of Flash is using the following player version MAC 10,0,12,36. I am using 10,0,32,14 MAC in my Safari browser and their the movie plays fine once the file is fully downloaded (how can I change this?) only when let friends try it out which have version 10,0,32,18 or the same version it doesn't work for them. Also when I am using an older version doesn't seem to work. I thought that H.264 support was added in some version of Flash Player 9. One of the issues which I was getting that the video playback worked lovely in Test Movie with the below listed alzheimer.mp4 url but when testing after the SWF and HTML were uploaded to the webserver it failed to work and I was receiving a FileStructureInvalid error. Now I would expect that the video file would fail in Test Movie too when the video file structure is invalid.
    I have tried the following video files both encoded with Adobe Media Encoder:
    http://www.letslearn.it/dropbox/alzheimer.mp4
    http://www.letslearn.it/dropbox/alzheimer08.f4v
    The current player can be found at:
    http://www.letslearn.it/dropbox/alzheimer.html
    I have attached my As3 version of the Flash file which is normal easy video stuff.
    Anyone happen to know what could be the issue here? I am getting desperate!

    Yes, I have just used the normal Video-object together with the normal trick to load Flash Video files with it. Nothing special only with a full URL for the play()-method. I have attached the source code for your convenience. The original files are edited in Premiere Pro CS4 and are based on one original ripped DVD vob file and a newly created Quicktime-based slideshow animation which has then be edited into one using Premiere.
    After that I  have selected the sequence of the Premiere project which I have exported using File > Export which is using Adobe Media Encoder. For the encoding I haved used the Export Settings: "Format FLV | F4V", Codec On2 VP6 and then altered the video size and bitrate so that the file size gets smaller this is for the Alzheimer08.f4v file. The other file used the H.265 Web Medium profile with also the video size and bitrate modified after it got encoded and uploaded to my webserver.
    The original files used by the Premiere Pro project are:
    VTS_01_1.dv
    Type: DV Stream
    File Size: 2.6 GB
    Image Size: 720x576
    Average Data Rate: 3.4 MB/Second
    Compressor: DV - PAL
    Quality: Normal (3.00)
    SLIDESHOW 2.mov
    Type: QuickTime Movie
    File Size: 3.2 GB
    Image Size: 720 x 576
    Average Data Rate: 3.4 MB/Second
    Compressor: DV - PAL
    Quality: Most (5.000)
    Above information is obtained in Premiere Pro by selected Properties-option of the submenu when selecting the file.
    Hopefully you can use this information but I could upload the original Premiere Pro project over the next few days. If you would be interested in it.
    FLA file: http://www.letslearn.it/dropbox/alzheimer.fla

  • Quality Issues with Video Footage

    Hello all
    I'm not sure if this is the correct forum to post this question
    I'm having trouble with the quality of my footage on export to DVD and I'm wondering if this is due to my settings in FCP or my workflow.
    The problem is that I am getting gradient separations in my footage. It looks like the Posterize effect in Adobe Photoshop.
    I have 2 samples here....
    http://www.arohajourney.com.au/Sample/sample%201.jpg
    http://www.arohajourney.com.au/Sample/sample%202.jpg
    When I start editing the problem in minimal when viewing in my output monitor but by the time I get my project to my DVD player it is very noticeable. Especially in disolves to black.
    *This is my workflow*
    Shoot on Sony Z1 in HDV format
    Capture to FCP 5.1.4 using Decklink HD Extreme.
    Connections are via the camera's component connections directly to the Decklink card via BNC
    Codecs are Blackmagic DVCPRO HD 1080i50 or AIC
    Edit
    Render
    Export via Quicktime Conversion > 10 Bit Uncompressed resized to 720 x 576 Pal 16:9
    Compress for DVD via Compressor 2.3
    Settings: MPEG 2 - CBR 6.2 Motion Est=Better
    Import to DVD Studio Pro 4.1.2 to create DVD elements
    Burn
    Then I cry
    Effects used in the samples are Mis Fire Vignette
    *My Mac*
    PowerPC G5 Dual Core 2.0
    2.5 Memory
    GeForce 6600LE 128mb
    2 X 500Gb sata drives
    Sonnets Fusion 500p external enclosure with 4 x 500gb SATAII Drives
    OSX 10.4.10
    I can't seem to figure this out so if anyone knows this problem or can point me in the right direction I will be very greatfull
    Cheers

    Hi Javabob
    I've tried that, the gradient issue is still there and i get the added joy of watching pixelated titles.
    I thought that maybe losing that step using the original footage to compress for DVD may work but it didn't...
    thanks for your response though

  • Having start-up issues with my 1st gen Macbook Pro

    Hi everyone. I just started having start-up issues with my first generation Macbook Pro. It was working fine the other day when I last used it, but today I went to use it and it wont load up to my desktop...? It starts up (grey screen with the little swirly bar under the apple,) then it goes to a blue screen, then my background and dock appear, then (before any of my desktop files even show up,) it goes to a blue screen (that brightens up and then dims a little,) and it just keeps showing this with a little swirly progress symbol (shows when the screen is darker blue, then disappears when the screen is a brighter blue.) I've included a video that I took with my iPhone to show it situation. Any ideas as to what's wrong with it? Thanks in advance!
    http://youtu.be/oDCfHM-Zoes

    Safe Boot by restarting your computer while holding down the "shift" key.  Safe booting disables all nonessential processes, often times allowing you to start up when you would otherwise crash.
    As of OS X 10.5.6 Safe Boot deletes the dynamic loader shared cache location in the /var/db/dyld directory.  A corrupt cache here can cause the blue screen crash.  Once you restart normally, the cache will be recreated.  This should take care of the issue.
    http://support.apple.com/kb/HT1564
    http://support.apple.com/kb/HT1455
    Use Software Update to update your os to 10.6.8 and anything else that needs to be updated.

  • Intermittent issues with video output initialization

    Hi Guys,
    I have received a new (i5, 15') Mac-book Pro more than 9 months ago. About 6 months ago it started having some serious intermittent issues with video output. Those issues are numerous and different every time, but all seems to lead to GPU problem. In chronological order:
    1)Started showing static colors as flickering and white color as blue.
    2)Blue screens in bootcamp and hangs in mac os
    3)Startup problems (fail to start)
    4)Startup problems resolved with firmware patch, but video fails to initialize during startups:shows black on mac os, and distorted green during bootcamp.
    So right now I am stuck with #4. The main issue is that it is intermittent - sometimes it starts to happen and sometimes it does not. Is there any way I can make apple replace the unit or the video-card? I did bring it to a apple certified service center, but they did not give any crap, even when I was able to demonstrate it to 2 people in there and gave me back the unit after failing to reproduce the problem on their own. I have all those problems in video and photos, but I don't see anywhere I could send them besides this forum.
    Some of the evidence (I have much more):
    http://www.youtube.com/watch?v=MsTYnUFCX1I
    http://www.youtube.com/watch?v=zK85Hi9gx24
    http://www.youtube.com/watch?v=pRH3DpN7qB0
    http://www.youtube.com/watch?v=dMXo8qF6S_k
    Message was edited by: Breakable

    "I have received a new (i5, 15') Mac-book Pro more than 9 months ago."
    You are still under warranty. *Call AppleCare*
    "Is there any way I can make apple replace the unit or the video-card? I did bring it to a apple certified service center, but they did not give any crap"
    No you cannot make Apple do anything. What you can do is call _Apple Customer Relations_ in your country. You can call AppleCare & ask politely & firmly to be transferred over to Customer Relations if there is no direct phone number like there is in the US. Relay to them what you stated in this post. See what they can do for you.
    You posted in the wrong MBP area (Original). I have requested that a HOST move your post to the proper forum MacBook Pro (2008 and Later). There will be no need for you to repost.

  • Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2.

    Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2. Seller is willing to replace it with ipad2 as well..
    Have also heard that the ipad3 revamped version is around along with the mini pad rumor..too much information - lot's of confusion pls help

    Lindsay,
    Your iBookG4 is still a pretty awesome Mac. Like already said, it has the power to run Leopard, but it depends if you have an internal DVD drive.
    Then I suppose you have to add up the cost of the OS, perhaps another 512MB RAM, iLife 08 and replacements for any favourite apps that you currently use (Leopard breaks a lot of stuff, but Intel breaks even more). Compare it to the cost of a new MacBook, which wil have all of that included and be 3-4x faster too.
    It also depends on what you want to achieve with your iBook. My PMG4 still cuts it today, I still use it in preference to my new Mac Pro, It's about the same age as your iBook, and I'll only stop using it when it becomes "painfully" slow. My 1 year old son currently uses the Mac Pro (parts for a Mac Pro are easier to replace than those for a PMG4).
    I think your choice is simple, if you can a cheap copy of Tiger, use that, it'll get your iPod Touch up and running. It came in DVD and 4 CD version (by request).
    Leopard will work for you too but a lot of the best eye-candy requires quite a meaty graphics card and you may need a RAM upgrade and replacement software - OS9 Classic is not supported in Leopard.

  • I am having an issue with my adobe acrobat 9 pro. Every time I try to open a pdf from someone it opens it up with my free adobe reader rather than the Acrobat 9 pro so then I don't have all of the functions of 9 pro. How do I get it to open with 9 pro ins

    I am having an issue with my adobe acrobat 9 pro. Every time I try to open a pdf from someone it opens it up with my free adobe reader rather than the Acrobat 9 pro so then I don't have all of the functions of 9 pro. How do I get it to open with 9 pro instead of the free reader?

    It may depend on the plugin that is loaded into your browser. However, right click on a PDF and select the Open With option and go to the default button to select Acrobat as the default. That might do it.

  • Issues with Video Conversion in N95 8GB

    I purchased a N95 8 GB yesterday. I have been trying to get the video conversion to work with video manager
    The conversion status tab do not go beyond 40% and it hungs there without any error message.
    Has anyone faced similiar issues with video.
    I used another convertor to convert the AVI file to mp4. But this file could not be played by N95 real player.
    Are there any specification for conversion, for the video to play in N95.
    Can anyone suggest on the best tool to convert video to MP4 and play in N95 ?
    Thanks,
    Sooraj

    For tips and tricks on video and nseries visit this blog..
    http://portablevideo.blogspot.com/
    640K Should be enough for everybody
    El_Loco Nokia Video Blog

  • MacBook Pro 15 Mid 2009 - Mac OSX 10.10.2 - Any issues with video lagging/audio lagging?

    Hello
    Current OS and System details below. Have started to experience audio and video lagging when browsing (not effecting audio on music)
    Have looked at some forums and it appears to be an issue with some later cards and Mac Book Pros
    Any one else experiencing issues? and if so are they resolved? and if so by what manner were they resolved?

    Since yo said "an issue with some later cards and Mac Book Pros" I would also post n the MacBook forum
    MacBook Pro

  • Issues with Video and Sound

    Hello all. I am having an issue with my MacBook Pro. This issue travelled from 10.4 to 10.5 to 10.6 with me. The install from 10.4 to 10.5 was a clean install. I messed around with the video card a long time ago back in 10.4 through a boot camp windows 7 partition trying to get a game to work. I don't remember for sure if the problem started right after that or not, but I'm thinking probably. Basically I was trying to reflash the video card to get a game to work in a beta version of windows 7.
    My main issue is that videos are laggy and jump and freeze and such. This happens on anything from a YouTube video to Quicktime to VLC. Also, the sound will frequently freak out and become "robotic" and skip a lot as well. If I leave it alone and don't play anything with sound, it will return to normal after a random amount of time. Restarting also fixes the issue. This usually only happens when playing video, but every once in a while will happen in iTunes when just listening to music.
    I guess I need to know if there is a way to "reset" the video card or graphics card or whatever. The audio too if need be.

    My main issue is that videos are laggy and jump and freeze and such.
    Make sure you have the latest versions of VLC, Flip4Mac, Perian and Adobe Flash Player.
    Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select Disk Utility.
    Select the disk or volume in the list of disks and volumes, and then click First Aid.
    Click Repair Disk.
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751
    For Quicktime issues, visit its forum area - http://discussions.apple.com/forum.jspa?forumID=932

  • Issues with video/audio playback and Source window

    I have some video that I am trying to import to get into my sequence. Anytime I open the video into my source window (or drag it to the timeline), the audio goes crazy. It starts skipping around and jumbling itself. When I open the video file in Quicktime on my computer, it opens and plays fine. Also, I don't know if it is unrelated, but sometimes when I open a video in my Source window, there is no audio. I can drag it to the Sequence and double click on it to bring the Sequence video into the Source window and it plays fine.
    The video that I am having issues with is a .mov filmed from an iPad (not sure which iPad model). It is filmed in Portrait mode, not sure if that matters. Please let me know what other information might be needed to troubleshoot this issue.
    Thanks!

    Ooh. Sorry about that.
    - I am using Adobe Premiere Pro CS6 v.6.0.3
    - I'm sure I have the latest update. I'm using Creative Cloud, and the Adobe Application Update Manager says everything is up to date.
    - Operating System is Windows 7 Professional (Service Pack 1)
    - Source footage is a .mov filmed in portrait mode (I didn't record it.. Haha) on an iPad, not sure the model.
    - I am getting no error messages.
    - I was just dragging the video file from the Media Browser to the Source window. Nothing special.
    - This is working on all of the other clips filmed from the same iPad at same resolution, etc. Also, this particular video plays perfectly in Quicktime. It's just when I try to play it in Premiere Pro.
    - Other software that is currently running is standard stuff: antivirus, Outlook, Gtalk, Dropbox. Nothing that uses audio.
    - I have installed K-Lite Codec pack when I got the computer.
    - I have a Dell Preision T7600, Dual Xeon Quad-core processors (2.00GHz), 16 GBs of ram, Nvidia Quadro 4000 (2GB), and running off of a 256GB SSD.
    - I am using the Mercury Playback Engine GPU Acceleration.
    - The issue is happening on playback, both in the Source window and the Program window when I drag the video to the Sequence. It plays fine in Quicktime.

  • Issue with video playback

    I'm having an issue where video playback drops to 1 frame per second or less. The problem occurs when I have the mouse on the same screen as the video (dual screen setup) or on the second screen.
    As you can see in my information, I'm running an IBM Thinkpad T43 with a Viewsonic q20wb monitor.
    Thanks for the help!

    Yes, I have just used the normal Video-object together with the normal trick to load Flash Video files with it. Nothing special only with a full URL for the play()-method. I have attached the source code for your convenience. The original files are edited in Premiere Pro CS4 and are based on one original ripped DVD vob file and a newly created Quicktime-based slideshow animation which has then be edited into one using Premiere.
    After that I  have selected the sequence of the Premiere project which I have exported using File > Export which is using Adobe Media Encoder. For the encoding I haved used the Export Settings: "Format FLV | F4V", Codec On2 VP6 and then altered the video size and bitrate so that the file size gets smaller this is for the Alzheimer08.f4v file. The other file used the H.265 Web Medium profile with also the video size and bitrate modified after it got encoded and uploaded to my webserver.
    The original files used by the Premiere Pro project are:
    VTS_01_1.dv
    Type: DV Stream
    File Size: 2.6 GB
    Image Size: 720x576
    Average Data Rate: 3.4 MB/Second
    Compressor: DV - PAL
    Quality: Normal (3.00)
    SLIDESHOW 2.mov
    Type: QuickTime Movie
    File Size: 3.2 GB
    Image Size: 720 x 576
    Average Data Rate: 3.4 MB/Second
    Compressor: DV - PAL
    Quality: Most (5.000)
    Above information is obtained in Premiere Pro by selected Properties-option of the submenu when selecting the file.
    Hopefully you can use this information but I could upload the original Premiere Pro project over the next few days. If you would be interested in it.
    FLA file: http://www.letslearn.it/dropbox/alzheimer.fla

  • Import AVCHD video footage into Premier Pro CS6 - MAC - AUDIO MISSING!

    Hi,
    Ive been attempting to import AVCHD video footage captured on a Panasonic into Premier Pro CS6 on my MacPro. I've tried this from the camera and after copying the entire folder to my desktop. The footage is there, but has no audio! I have read loads, forums, advice, YouTube vids and Adobe manuals, trouble shooting and help, but found no simple answer to this simple issue.
    Any help would be appreciated.

    Thanks too Jeff. Sandeep's post is a simple redirect to a post on Adobe which naturally I've already read before turning to the forum. The link then sends you to another link! Info. is too light on specifics, doesn't help! I have 6.0.5 as downloaded from Adobe... no joy! All remains the same, picture but still no audio! Maybe a compatibility issue with Panasonic's HC X900... but Panasonic's website is as light on info. as Adobe. I'm off to the shop to buy FCP or Avid.

  • Urgent issue with video size and quality.

    Ok, I have Premiere Pro CS4 and I am running on Windows 7 64bit. I have a movie that I have been working on for 2 years that already has hundreds of proper LightScribe DVD's, slim cases and printed cover wraps already done and paid for. I was supposed to already be done with this and selling copies, but Premiere has royally messed things up for me and I am now in limbo with the project.
    The film was recorded with simple non-HD 4:3 camcorders. Some of the footage is from years ago and was uploaded via USB low quality, but it still looks fine on YouTube, my computer, and even when I burned a DVD with the footage alone unedited. The rest was uploaded with via DV and is actually pretty good quality for being 4:3 and non-HD. I took all this footage and stretched it out with a little bit of cropping to make it widescreen on Premiere. Again, it looks great in the preview and looks fine when I exported it as a WMV.
    However, when I burned it to DVD, it was horrible quality and also chopped off the sides of the film on my widescreen TV, even though I exported the film as widescreen AND burned it on the widescreen setting! Why would it do that if it was made, exported and burned as widescreen??? Also the sound was terrible! And I exported on the highest setting possible.
    Second, I heard that AVI is a better format, so I tried that. The file was absolutely huge and when I opened the file with media player it wasn't the same perfect fit as the WMV. What I mean by that is, when I watched the WMV, media player showed the video as a perfect fittig window, no excess black space on the top or bottom. Same thing with several AVI mainstream movies that I have on my computer (actual movies, like Terminator Salvation, Pandorum, Black Hawk Down, etc). They all fit media player perfectly, no excess black on top or bottom. So why is it that actual movies in AVI format and my WMV video and movie files are perfect fit on media player, but when I export an AVI from Adobe Premier, it adds excess black on top and bottom? That doesn't make any sense, especially since you can look at a preview of what the exported file will look like and it doesn't look anything like what the ACTUAL export is. What kind of a joke is this?
    So I pretty much need help figuring out why the exported movie is horrible quality, especially on DVD that is so bad I cannot dare to sell it to a customer, AND I need help figuring out why my Premiere Pro exported AVI's look nothing like mainstream film AVI's that I have on my computer. Someone please help, this is really hurting my business!

    hiya
    well , you are certainly getting some really good help now...its like you fell into a room with the best editors and shooters and everything and you can get a lot of information and run with it...find out a lot of things.
    Some of it requires you follow through on your own as much as possible ( like you have already ) by reading and googling things you dont know, etc...  this forum and these guys is how I learned a lot about this stuff in the past year or so...so listen to what they say....google what you dont understand....you cant go wrong.
    now...about what you said...
    I exported the test clip as  an MPEG2-DVD and it gave me a video file with NO SOUND, a separate WAV  sound file, and two xmp files. This is not what I was looking for.
    I have a movie project on  Adobe Premiere Pro CS4. I simply want to export/publish the movie, burn  it onto a DVD using Windows DVD maker and have it as top quality, like  it looks in the preview monitor on Premiere. Tell me how to do it.---
    I dont use encore to burn a dvd, but use DVDit PRO.  It wants exactly what you got when you exported to mpeg 2 dvd ....a video file without sound muxed.. and a separate wav file....
    I know it sounds weird but thats the way the program burns the DVD....and that has to do with making the VOB files etc for the DVD...which is just the way it is....you see the vob files AFTER you burn the DVD if you look in the DVD...
    anyway, mpeg 2, mpeg 4, all that highly compressed stuff ( as you said ) is highly compressed to FIT onto the media ( DVD ) or whatever....but it plays good and it looks good...and has NOTHING to do with anything except squishing stuff down to fit the media and looking ( viewing ) GOOD.  the best movie you ever saw on DVD is mpeg 2 .....  turned into vob in the making of the DVD by the software that makes the DVD.
    all these things are different animals ...what you edit , what you deliver, etc ....

  • Explorer issue with video swf

    Hi can anybody tell me why Internet explorer did not open the video, before I had accept to open this site, in firefox it just open,
    I have tried Amara slide show bouilder, and here there is no problem with the swf files in explorer.
    I know that I in the internet explorer option can change this irritating bloking, so can anybody tell me why this happened for me
    I have visit a lot of internet homepage, where there is a video and where internet explorer did block the site.
    I have sent my html file and the swf file.
    best regard
    kenneth

    Hi,
    Does the issue occurs with other browser such as Chrome or Firefox?
    Please try the following to check the issue:
    1. Updating your graphics driver. visit the website of your computer manufacturer to download the latest driver.
    2. Disable hardware accelerate to check the issue
    Hardware acceleration is a feature in Adobe Flash Player that usually delivers a better video playing experience; however, sometimes it may cause issues.
    The option to disable hardware acceleration is only available for certain versions of Adobe Flash Player system plug-in and operating systems (OS).
    Follow these steps to see if the option is available:
    a. Right-click on the on the video you’re having issues with
    b. Click Settings
    c. If you see the option Enable hardware acceleration, deselect it. If you don’t see it, the option is not available for you.
    d. Click Close
    e. Refresh the page and check whether the video is working
    Once you disable hardware acceleration, the change will apply across all Internet browsers on your computer.
    3. Reset Internet Explorer settings
    http://support.microsoft.com/kb/923737
    Please understand that reset Internet Explorer to its default configuration. This step will also disable any add-ons, plug-ins, or toolbars that are installed.
    4. Disable the security software temporarily and see if it works.
    Hope it helps.
    Regards,
    Blair Deng
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for

  • Barton 2500+ on MSI K7N2 Delta-ILSR nForce400

    Got it installed today... When I boot it says "Scanning IDE Drives..." then it flashes "No array is defined" and gives me two options, ctrl+F would do a "FastBuild"... when I do that the screen flashes "No Disk is found. Please check the power and ca

  • Inventory Report For Special Stock (Project Stock)

    Dear Sir, We are in Make -To - Order scenario and procure the material against  the WBS element . For getting the Inventory List , we use MBBS tcode but it has following limitation :   a) It give the Stock Status as on date basis . While we need Stoc

  • Safari makes me NOT want to get a Mac

    I have a friend with a Mac who likes to tempt me into switching from windows to Mac. I've always looked on Mac with admiration. However, my experience with Safari has reinforced all the reasons why I haven't switched. Like everything Apple, it's imma

  • Is there a way to make photo files on the computer the same as the files in iPhoto?

    I have all my photos organized in iPhoto but they are not organized the same way in the photo section of my files.  Is there a way to have them show the same files?  When ever I need to add a photo to a website I can't find the same one's I have in i

  • Unable to view documents - related to territory management?

    Hi In our project, the users are assigned to the territories via org positions. In a typical instance, out of the two users assigned to the same territories, one is able to view a document and the other is not. I have checked the position/ territory