Issue with vocals during recording - only hear them on left side of headphones.

wanting to hear in stereo...

If you've recorded your vocals the way most people do, then they will be mono anyway! If you want to hear a single mono track in both channels (assuming that your headphones are working normally in the first place), then you either have to pan the mono track so that it feeds into both sides of the master channel, or you have to duplicate the vocal so that it occupies both sides of a stereo track. The former is the preferred way of doing it - have a mono vocal track in your stereo mix and pan it to where you want it in the stereo field.
As far as monitoring during recording is concerned, then there could potentially be a few other issues - it rather depends how you are feeding the channel out of your sound device. It's not quite so easy if it's a mono track to feed both sides of a pair of headphones when you haven't gone via the master mixer - IOW you are using a direct output from the track. That would only feed one channel by default. But if you are going via the mixer (which you normally would whilst laying tracks) then it should just be a matter of panning the vocal channel into the centre.

Similar Messages

Audio only coming out of left side of headphones

Hey all, I got my Ipod Video 8 months ago. Everything was perfect until recently. One day, I turned on my Ipod and sound was only coming out of the left side of the headphones. I thought it was the headphones, so I tried the headphones on a computer. And it was fine on the computer. I tried 3 different sets of headphones on my Ipod and still the same problem, the sound only comes out of the left side. If I move the jack around, sometimes sound will come out of the right side, but only briefly. Any suggestions on what I can do?
Ipod Video Windows XP Pro

marcmax123 wrote:
Is there a way to fix this in garage band?
http://www.bulletsandbones.com/GB/GBFAQ.html#leftspeakeronly
(Let the page FULLY load. The link to your answer is at the top of your screen)

My iphone 5 recently got wet and now if someone calls me I can only hear them if the phone is on speaker. Can you please tell me what to do

My iPhone5 recently got wet and now if someone calls me I can't hear them. I can only hear them if I put the phone on speaker. Can you plz tell me what to do

Make an appointment with the Apple genius and get an Out of Warranty replacement for a fee.

Using ichat my pc parents can hear and see me, but i can only hear them.

i just got a isight and trying to chat with parnts in korea. they can hear and seeme, but i can only hear them. my ichat does not give option to start video chat. can anyone please help. i have mac osx 10.3.9

Hi kushkush,
Welcome to the Apple Discussion Pages.
Check the items in this thread http://discussions.apple.com/thread.jspa?messageID=1660376#1660376
What are your Parents using ?
Ralph

New 4s connects with bluetooth in my Lexus, but I have intermittent problems with calls. I can hear them, but they can't hear me. Never did this with 3gs. Anyone else have this problem?

New 4s connected to my Lexus bluetooth. Having intermittent problem with calls. I can hear them, but they can't hear me. Never a problem with 3gs phone. Anyone else having this problem?

I ended up getting a new phone, straight through Apple. I called their technical support and went through all he basics again and they decided to replace it. Was a pretty quick process - after defaulting and resetting the whole phone (about 2 hours), I called them back to inform that there was no change, so they set up the order.
I had to give my CC# so they could hold a charge on it (in case I didn't send my old phone bach, which they sent me a pre-posted package to send it in anyway). Had a brand new iPhone 4S in my hands in 4 days, which was pretty decent. I had uploaded everything previously to iCloud, so setting up the new phone was a snap.
Only thing I really didn't like was they charged me almost 30 bucks for shipping or processing, or something. Not so sure that should have been my responsibility after spending so much on a brand new product, only to have to have it warrantied after, like, a month.

A can only hear volume when i use the headphones: no ringtones, no music, nothing without the headset. what did i do? it's a 48 hour old phone

I have done something to my volume. there is no sound unless i use headphones. I must have done something when using suri, but i don't know what. i have turned the phone on and off with no change. please help. the volume is up, and the slider for mute is not on.

I had a similar problem, I could only hear Siri when I was using headphones. Without headphones, I would call up Siri and I wouldn’t hear that “ding” nor would she audibly speak back her answer.
I found out that Siri has its own volume control. To access it, activate Siri and when the Siri microphone pops up, go ahead and adjust the Siri volume using the volume controls. I had my regular volume up pretty high but I had the Siri volume all the way down. This was driving me crazy, now it works fine.
Chris

I can only hear sound from one side of the head phone

I've plug in my bass guitar through a cord and a converter in the line in port on my PC. Then checked 'listen to this device' (head phone) which is connected properly as it worked perfectly when I play any sound in ma PC. But when I play my guitar, I can
only hear it from one side of the head phone. How to fix it!?

Is that compatible to give output from both sides (R + L) ? Can you check same thing on other system ?
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Is this an issue with Windows 8.1 Enterprise Main theme or with my Laptop Screen??!!

Hello,
I currently found a strange issue happening with my display and it only occurs when I am setting my desktop background as the Main Windows theme or any picture I set as a theme.
When I click inside any open folder as shown in this recorded video and when I click on Desktop, doing this back and forth and I notice quick flickering inside the open windows.
You will see this at second 0:26 in the video.
https://www.youtube.com/watch?v=3-8z8Ef2DcY&feature=youtu.be
It is also obvious in this video, I am doing this with the Intel Graphics Control Panel window.
The issue occurs at the time 0:10 and 0:25
https://www.youtube.com/watch?v=ntqNC1gUtHU&feature=youtu.be
Note: This only occurs when I switch between themes for the first time.

Well, here are my latest results.
Now, I am 100% and I can guarantee you that there is a still issue within Windows 8.1 theme.
I installed Windows 8 again, now see how the Device Manager looks like, see the Display Adapter driver.
It's Intel(R) HD Graphics 4000 (Microsoft Corporation - WDDM 1.2)
And now before I install any drivers or programs when I switch between themes and then switch back to that Main blue theme, no single flickers happens, so that means Windows 8 has no problems?
Looks like when you released Windows 8, you included graphics drivers for each system to install automatically after Windows install. Now the Windows Main Theme is a blue flower.
I installed Windows 8.1 again, now see how the Device Manager looks like, see the Display Adapter driver.
It's Microsoft Basic Display Adapter.
And now before I install any drivers or programs when I switch between themes and then switch back to that Orange color theme, I get screen quick black flickering, so that means Windows 8.1 may have got issue when switching back to the Main theme.
I have also read this in this link
http://msdn.microsoft.com/en-us/library/windows/apps/dn344644.aspx
Windows 8.1 x86 and x64 graphics driver availability status
Windows 8.1 graphics driver deployment changes (x86/x64)
Windows 8.1 doesn't include in-box, third-party GPU drivers. Instead, drivers are provided via Dynamic Update during the operating-system (OS) installation or upgrade process, or via Windows Update after the initial boot of the OS. Customers installing
Windows from a USB flash drive or ISO image while not connected to the Internet get the Microsoft Basic Display Adapter driver with limited functionality. Customers are encouraged to install Windows Hardware Quality Labs (WHQL)-certified third-party drivers
from Windows Update, OEM, or independent hardware vendor (IHV) websites when available.
Now, I thought of an idea. I thought that if replaced that Microsoft Basic Display Adapter which is in Windows 8.1 with that in Windows 8 (Intel HD Graphics 4000 Microsoft Corporation WDDM 1.2) The issue might be fixed.
So I reverted back to Windows 8 and used DriverMax to make a backup of the graphics driver.
Now, I reverted back to Windows 8.1 and used that DriverMax software to restore that graphics driver which was pre-installed in Windows 8 but still the issue isn't fixed. :(
I am sure the issue that causes this black flicker on screen when switching back to the Main theme and then closing down the
Personalization window isn't related to the graphics hardware or the driver.
I am pretty sure Windows is causing this.
I think you should get a fix to this please, work on a fix for this flicker that happen when switching themes I am pretty sure the other issue that causes flicker on my open window when clicking inside it and outside it will fade away.

Getting rid of dry vocals during recording

I just bought the Antares autotune evo and have been playing around recoding with it. The problem I'm having is that during recording I am hearing the dry vocal track along with the effect, it's very distracting not hearing just the effect on the vocals. Does anyone know how I can set the track to only hear the effect without the dry vocals?

Sorry, I should have been more specific about my gear in the post. I am using an m audio projectmix i/o for my audio interface. I didn't think of checking the settings for my interface, I will take a look at that. Are there any settings in logic that might enable input monitoring? If so I'd like to make sure I do not have that enabled.
Thanks for the quick reply, it is appreciated.

SAP DS 1.3: Performance issues with crosstab planning (IE only)

Hi everyone,
because im currently developing a custom component for DS 1.3, I got in touch with the planning feature of design studio. Planning currently only works in a crosstab.
Here I recognized a significant performance issue with the internet explorer:
If you simply type in a new value into a cell in a crosstab, it takes ~10s to confirm it (not constant! Sometimes it takes 2s, sometimes 15s). During this 10s, it seems like the IE crashed - no response at all. Sometimes there is also a warning message on bottom ('... script is slowing down the application ...').
Tested the same scenario with Chrome and FF - takes less than 1s to confirm.
Whats going on here ...? Anyone experienced the same issues?
My testing environment:
Windows 8.1
IE 11 (also tested emulated Ie 10 and IE 9 - same problem)
DS 1.3.0.3.201405141058
Local mode
Application only contained a simple crosstab, data source based on BW 7.3 query
Of course I deactivated all custom components while testing...
Kind regards
Wladimir

Hi Tammy,
Thanks for your reply. Of course, my IE is updated to latest version (11.0.9600.17207).
Hopefully SP1 will fix this bug...
Kind regards
Wladimir

Quicktime playback issues with Keynote during SLIDESHOW

SInce I upgraded to Keynote / iWork 06 I'm experiencing the following problems during the SLIDESHOW. Some of my mpeg4 QT clips get frozen for the first 2 seconds: i can only hear the sound and then the images start after a couple seconds. As I'm teaching a big film class where the clips are the most important element, this is becoming particularly annoying (particularly to the students too). I have a Poerbook G4 with 1.5 GHZ and 1.2 GB DDR.

I did a few tests (removing all builds on the slide, changing the orders, using different clips, and even having the clip start right away). Nothing seemed to work... The problem stops to occur only if I remove all the slides from the presentation except the one with the clip: in that case the clip wil play smoothly even if there are other builds in the same slide—of course, a one-slide presentation is not an option for me!

Issue with clearing previous record while uploading through LSMW

Hi friends,
I have created lsmw for hiring action using transaction PA40. i have a tab delimited flat file, when i run the lsmw script the first record is uploaded perfectly. However the upload halts for the second record, coz the previous record still remanins, is there an issue with the recording or do i need to clear anything?. How do i resolve this one and continue uploading other records.
Regards,
Quavi

Hi Friend,
In the LSMW, Under the User menu you have Display Read Program and Display Conversion Program select this and open the respective program you feel having problem and put a break point in the Loop statement and debug. I will help you to identify the problem to resolve.
Rgds,
Jey

Aperture 2.1.4 issue with Image preview (Browser Only)

Hi,
I'm using Aperture from some time, from past few days I'm facing issue with my aperture image browser only.
i have few projects created. In some projects I'm unable to see the images in view browser only mode. If I select some other view option it works fine except view Browser only has issue.
any idea how can i fix it.
Thanks,
Gulab Pasha

thanks for your reply,
I can see the blanks dashes square instead of thumbnails. and it affected to all the images in a project.
(In one of the other modes, you could select all the images (or just the ones affected) and reprocess the thumbnails). how would i do this...
Thanks,
Gulab Pasha

I cannot hear the caller's voice when I receive a call. I can only hear them when I turn on speaker phone. What can I do?

Even if I have a good signal on my iphone 4 I cannot hear any sound when I answer a call. I can only hear the caller's voice when I press the speaker phone button. Please help as have fiddled with setttings to no avail and taken out SIM card and restarted. No joy. Thanks.

I have the same problem.. I am seeing any solution in other forums.. But lot of people seem to have the same problem

Having issues with my mac will upgrade solve them?

Hi guys with reference to my other thread me and the wife were discussing wether to upgrade our 10.3.9 to 10.4 (so she can watch videos on facebook etc) is it really worth it? if this has been covered elsewhere please forgive me .Thanks

valeboy:
The move to Tiger is an upgrade, which involves purchasing new software disks. You can download updates once you have the basic software installed, but the initial installation is from disks you have to purchase. See Software update, upgrade--what's the difference?. In adition, your computer will need to meet the minimum system requirements for Tiger.
Formatting, Partitioning Erasing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Go to the Utilities menu (Tiger) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• Click on Options button
• Select *Apple Partition Map* (PPC Macs) or GUID Partition Table (Intel Macs)
• Click OK
• Select number of partition in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
Open installer and begin installation process.
Installation Process
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Open Installer and begin installation.
• Select installation option
• Choose to Customize and deselect Foreign Language Translations and Additional Printer drivers.
Optional: Check box to install X11 (Tiger and later).
• Proceed with installation.
• After installation computer will restart for setup.
• After setup, reboot computer.
• Go to Applications > Utilities > Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select First Aid in main panel.
• Click Repair Disk Permissions.
• Connect to Internet.
• Download and install Mac OS X 10.4.11 Combo update (PPC) (Tiger).
Computer will restart.
• Repair Disk Permissions as previously.
• Go to Apple Menu > Software Update.
• Install all updates.
Computer may restart after updates.
• Go to Applications > Utilities > Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select First Aid in main panel.
• Click Repair Disk Permissions.
Note: if you have a backup/clone you may choose to migrate your data, settings and any apps following the setup step.
cornelius

Issue with vocals during recording - only hear them on left side of headphones.

Similar Messages

Maybe you are looking for