Issue with VPN configuration in Windows 2008 r2 and 2012 Servers.
Hello ,
I hope you can help me to fix this issue, it's been 5 days since I a, trying to configure VPN in your 2008 and 2012 Servers. On both platform (2008 and 2012) I am getting same error while configuring VPN (after role installation).
"Unable to load C:\Windows\System32\iprtrmgr.dll". So, I have removed IPv 6 entry from the registry and now able to start server (not sure what configuration it took automatically). I tried to disable "Routing
and Remote Access" service and got the same error while enabling "Routing and Remote Access" is running but VPN is still not functioning properly).
I am getting following error,
================================================
Errors under the Event viewer (Remote access)
1) --->> CoId={DF744409-02D7-4FF4-AD24-504F0C83E1AB}: The user 10.0.0.1\chetan connected from 10.0.0.1 but failed an authentication attempt due to the following reason: The remote connection was denied because the user name and password
combination you provided is not recognized, or the selected authentication protocol is not permitted on the remote access server.
2) ----->> CoId={DF744409-02D7-4FF4-AD24-504F0C83E1AB}: The user connected to port VPN3-127 has been disconnected because the authentication process did not complete within the required amount of time.
Errors under the Event viewer (Remote access)
3) ---->> Network Policy Server denied access to a user.
Contact the Network Policy Server administrator for more information.
================================================
I am using (MS-CHAP v2) + EAP (Authentication Method). Please let me know if you need any additional information.
Thank you,
I Guess this thread is not related to SQL Server .User is facing issue because of network or may be due to OS.I guess I will move this into windows forum.
Moderators please move to Network forum
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers
Similar Messages
-
Issue with RDS Licensing on Windows 2008 R2
I'm attempting to consolidate 2 very small Citrix environments (only two total servers in each environment) into a single farm and when attempting to migrate RDP applications to what will be the full production environment, I'm receiving the following error
on only 1 of the 2 servers regardless of who launches:
The remote session was disconnected because there are no Remote Desktop client access licenses available for this computer.
Here's where it gets really interesting:
All servers are running Win 2008 R2 and are at the same patch level
In the environment I want to retire, each server has it's own Remote Desktop licenses that are on a Per Device level.
In the environment I want to migrate to, each server has it's own Remote Desktop licenses, one server is (currently) set to Per Device, the other Per User - but the one that is Per User is the one that can connect successfully.
I've attempted to change the RD Session Host Configuration to point only at the server that appears to be successfully allowing connections with no success.
I've reviewed other threads of similar error messages and none seem to apply.
I'm at a loss, please help.Hi,
Thank you for posting in Windows Server Forum.
From your desciption it seems that you have set the RDS CAL to per device on one server and the one which is facing error, you are pointing that server to the server which is already set as Per device CAL and thus you are facing the error. Means The RD licensing
mode on the Remote desktop server set to Per Device, while the license server might have only Per User CALs.
If this is the case, the license server issues only temporary licenses that cannot be upgraded. When the temporary licenses are within several days of expiring, "Event ID 26, Source: Application Pop-up" appears in the application event log on the client.
The event message indicates the number of days remaining before the temporary license expires. Similarly, "Event ID 1011, Source TermService" appears in the application event log on the terminal server.
There are solution to this issue by changing the license mode and check the result. Also it can be possible that the remote desktop server might not be able to locate the license server.
Please go through below link carefully. (As it’s for server 2003 but we can verify the solution as described)
Troubleshooting Remote Desktop Licensing Error Messages
http://technet.microsoft.com/en-us/library/cc756826(v=ws.10).aspx#BKMK_12
In addition, you can try following solution.
1 - Open regedit
2 - Go to this location HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSLicensing
3 - Then Delete MSLicensing key totally.
4 - Now reconnect to the same server machine through remote desktop.
Hope it helps!
Thanks.
Dharmesh Solanki -
Slowness when connecting to RemoteApp configured in Windows 2008 R2 Server using RDP file
Dear All,
When connecting to a RemoteApp configured in Windows 2008 R2 with less privileged user it takes ~20 seconds to connect.
Initial connection to
application takes about 20-30 seconds and once loaded, subsequent RemoteApp connection takes
2-3 seconds. i.e. if there is a disconnected session available in the server it connects quickly otherwise it takes long time.
I am seeing this issue with Windows 2008 Server, when I connect to a Windows 2012 Server RemoteApp gets
connected quickly. Also if I try with higher privileged user (like RemoteAdmin) connection is quick. The user I am trying is having lot of group policies set to limit user access to file system, desktop and registries.
If I keep UAC settings to minimal level connection happens quickly(i.e. solves this issue). But I am
not supposed to change the server UAC setting. It seems this has something to do with the list of group policies set for the user.
Any suggestion to avoid this first time connection delay for less privileged users for connecting to RemoteApp (in Windows 2008 Server).
Thanks
BachuuHi Bachu,
Thank you for posting in Windows Server Forum.
First of all, if you are using RD Gateway serve then I would like you to
uncheck the “Bypass RD Gateway server for local address” under RemoteApp Manager Checkbox and notify the result.
Configure Remote Desktop Gateway Settings
Also like you to update the RDP client version to RDP 8.1 and then check the result. In addition,
I will suggest you to check that you have proper certificate in place. You can enable certificate revocation checking on RD Gateway client. Might due to this, you are facing issue. Please notify that you find any certificate related warning. Refer below article
for information.
How to Enable Certificate Revocation Checking on a Remote Desktop Gateway Client
Hope it helps!
Thanks.
Dharmesh Solanki -
What's error 1 in adobe photoshop elements configuration? I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninstall and reinstall. I have done this but the message continues to appear
You haven't mentioned which version of PSE. If it is PSE 13, that requires a minimum of windows 7.
-
Error: SAP installation of ERP Sr3 with ORACLE 10g on Windows 2008 server
Dear all,
while installaing SAP ERP SR3 with ORACLE 10g on windows 2008 server...
we are getting error as not support.
please confirm wether this version of OS is uspported or not.
thanking you in all,
by
Animeshactualy we tried to change Oraparam.ini file in the installation folder...
edited ... windows= 5.0, 5.1, 6.0
we had entered 6.0
Yes - that is necessary.
and started ... but after starting we are getting ERROR like unKNOWN and installation popup (OUI popup) exiting with .. error popup.
Yes - because Oracle delivers its own Java version - which is too old to run on Windows 2008.
if you suggest us to use 2003 64 bit for temporaray .... purpose.
and is there any specified procedure to UPgrade OS.
like... DB should be updated before OS upgradation.
You can run 10.2.0.4 on Windows 2003 x64 nicely and upgrade to Windows 2008. Since there is no "upgrade" (it is the highest version supported) there´s no need to do anything.
The question you have to ask is:
Why do you need Windows 2008? Is there any technical implication?
Markus -
Initial issues with PS CS4 Extended Windows XP Pro.
Initial issues with PS CS4 Extended Windows XP Pro.
CS3 worked just fine but had many issues with Bridge CS3. So frustrating that the $$ to upgrade to CS4 seem worth it. Mostly works OK with the following exceptions:
1. Sometimes the file menu selections are non-selectable grey including fundamental functions like Open and Exit not even clicking on the x will allow PS to close! I found a workaround, I can select a tool that is not currently selected (like the crop or brush) and now the menu items appear.
2. The Arrange Documents drop down menu is blank except for the lower text portion. All icons are missing. Roll over text popup shows what is supposed to be on the menu but no icons.
3. I have setup Bridge CS4 to auto start at logon. Works OK but sometimes for whatever reason stays busy after I close. Task Manager shows Bridge using up to 25% of CPU time and the program is not even open!
5. I purchased a couple Canon EOS 50Ds as backup cameras for our business. Worked last week with CS3 and Bridge with Raw 4.6 upgrade. Does not work with RAW 5.0 in CS4bummer!I had the same problem with blank/missing "Arrange Documents" icons. And I use NIK and OnOne plugins (CS4 & Vista). These plugins are all supposed to be compatible with CS4 and I use them ALOT - so I refused to remove them. Today I also started having a problem with an error re: needing to install a printer before I could select print functions.
I found the answer to both problems!! While researching the error message I found information from Adobe support stating that you should:
1. Quit Photoshop
2. Vista: Rename the Users\[username]\AppData\Roaming\Adobe\Adobe Photoshop CS4\Adobe Photoshop CS4 Settings\Adobe Photoshop CS4 Prefs.psp file to Adobe Photoshop CS4 Prefs.old
Windows XP path: Documents and Settings/[username]/Application Data/Adobe/Adobe Photoshop CS4/Adobe Photoshop CS4 Settings/Adobe Photoshop CS4 Prefs.psp
3. Start Photoshop - it will create a new preferences file.
My print error message is gone AND I have Arrange Documents icons!!! -
DHCP Failover in Windows 2008 R2 and Windows 2012 R2 Environment
Hi Everyone,
We are trying to implement DHCP failover in our environment. Our IT Infrastructure consists of 4 – windows server 2008 R2 servers and 7 – Windows Server 2012 servers; 1 Main Office with 2 – DC’s and 9 branch/remote offices with one DNS server in every remote
office. All the DNS servers have 2 scopes defined on them for VOICE and Data with different Subnets.
What would be the best method to implement failover in 2008 R2 – Windows Failover Cluster or Split scope? And how to implement DHCP Failover in Windows Server 2012 R2?
Please let me know if you need more information.
Thank you for your help!
-kNHi,
if you can choose between 2008 R2 and 2012 R2 than go with 2012 R2 it is easy to create a DHCP failover there. Actually that is one of the new features of Windows 2012.
With Server 2012 you setup your fist DHCP server with the scopes you want to setup. Than you install the second 2012 server with DHCP role and authorized. If you have done this you going back to your first server, where you already configured your scopes.
Now right click onto the scope you want to setup for failover and select 'Configure Failover'. You can than set it up as kind of split scope (Load balance Mode) or as real fail over setup (Hot Standby). In Load balance Mode you can configure the balance of
IP addresses between the both servers, like primary has 60% IP addresses and secondary has 40%.
With Server 2008 R2 the easiest configuration is split scope. But here it depends how many IP leases you will max have and if you can absorb if one of the server is going down. Lets say you have 50 DHCP leases max, than sure, set it up as split scope. But
if you have 200 DHCP clients, than I would go with failover cluster. At the end it depends on your environment.
Sven -
I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.
Hi,
Regarding the issue here, please take a look at the below links to see if they could help:
Slow data transfer speed in Windows 7 or in Windows Server 2008 R2
And a blog here:
Windows Server 2012 slow network/SMB/CIFS problem
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
AndyIf you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy -
SAP R3 4.5b running on Windows 2008 R2 and SQL 2008 R2
Hi
Trying to obtain information on compatability of SAP R3 4.5b running on Windows 2008 R2 and SQL 2008 R2 ?
I understand that SAP may not support this? But would it actually work? Assuming we have a third party supporting it?
JayHi Jay,
You may check the support in PAM http://service.sap.com/pam.
Ideally SAP shall not support this environment.
Reason being:
1) SAP kernel for R3 4.5b not available for windows 2008 R2
2) Compatible database library not available for R3 4.5b on MSSQL 2008 R2.
with above 2 reason you shall not be able to install R3 4.5b on Windows 2008R2 with MSSQL 2008 R2 database.
Regards,
Deepak Kori -
BPC 7.5 SP4 Support for Windows 2008 R2 and SQL 2008 R2
The release notes for BPC 7.5M SP04 state that support has been added for both Windows 2008 R2 and SQL 2008 R2.
For SQL 2008 R2, there is nothing in the feature pack described as "SQL 2005 Backward Compatibility Components" - which was a required piece for BPC 7/7.5 on SQL 2008. Is the SQL 2008 version still a requirement, or does BPC 7.5 now not need the Backward Compatibility components?
Also, the ReprotViewer executable that is packaged with BPC 7.5 is the one for SQL 2008- will that work when installing SQL 2008 R2?
thanks,
Tony DeStefanis
Column5 ConsultingHi,
we have the same environment (BPC 7.5 SP4 on Windows 2008 R2 64 bit and SQL Server 2008 R2 64bit).
we are developping our application-set and for the moment we have no problem.
regards
massimo -
I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,000 songs and They are all in my music folder..What can I do to fix this issue? I've looked at all the tutorials on youtube and none of it works. I recently got a new computer and I Back-Up all my music and itunes playlist and I import it on my new computer with the new itunes and I go to play a few songs, it says I'm missing them I locate a few but it's still like 3,000 missing and again they are all on the computer and in one folder..Please Help !
I did that and nothing changed half my songs still have examination marks beside them
I also just tried dragging my folder of music int he playlist and it duplicated all of my songs? My playlist was at 5k now it's at 10k becuz of 3 duplicates of songs. Is there a way to delete multiple duplicate files? -
i have issue with my iphone5, the phone is open and good network signal, but when some one calling me they cant reach me, like the phone is off
You are as far as you can be with the original iPad; only iPad 2 and greater will update to 7+
-
Problem with photshop cc on windows 8.1 and 4k monitor at 3840x2160 resolution
can anyone help
i have a problem with photshop cc on windows 8.1 and 4k monitor at 3840x2160 resolution when i lauch photoshop cc everything is very small and i dont know how to get the program at the right sizeSearch the forum for similar topics dealing with high-DPI displays. 4k is insane, though. I don't think even CC 2014 is up to it.
Mylenium -
I've been using LR with my Nikon D3200 for a year or so. Shooting in RAW/NEF no issues with import etc until I updated LR and now I can't get LR to allow me to select when I try to import. It does show the images but they're grayed out and not able to be selected. Any thoughts? TIA
Greyed imaged in the Import dialog box mean you have already imported the photos into Lightroom, so there is no need and no benefit to importing them a second time.
Just go to the Library module, search for the desired photos, and resume working on these photos.
Maybe you are looking for
-
HT201272 how do i find music i put on itunes from cds
do you know i to find cd i downloaded to my itunes?
-
N8 User - Launch OVI maps, the phones restart
Dear All, Everytome i open OVI maps the phone restart, just got it about 2 weeks now Please help any one. Or NOKIA can answer
-
Hi I am creating the contract for the MTO material and creating the sales order with reference to sales contract r. When the process order is created , contract is assigned in the process order instead of sales order and the sales order stock is pos
-
Try to open Gmail....get message that it has crashed and do I want to send report....rashes whether I send the report or not
-
Any Suggestions-I Can't get K-12 school '03 Outlook email to work on iPhone
I'm a principal at a K-12 public school in Ohio. The IT department has tried to get my 2003 Outlook email account to work on my i Phone 3Gs. We've checked to make sure all ports are open and everything is typed in and spelled correctly. When I enter