Issue with Wacom Intuos3 in Photoshop CS5

New PC windows 7 home premium,/64 bit...old one was XP/CS2.
Using a Wacom Intuos3. With my old PC/PS, when I tapped the R touch strip, the window in PS would zoom in 'even' increments - 25, 33, 50, etc. New PC/CS5 increments are odd #s. I worked w/Wacom help,but they had no fix.
Said it was an Adobe issue. Can anyone help with this?

Turn off smooth zooming in the Photoshop prefs!
Mylenium

Similar Messages

Open Gl Issue with Nvidia GTX 460 & Photoshop cs5

open gl has become disabled and preferences window doesn't show the detected video. card cache level is set to 4. help>system info still shows the card and drivers but I can't use any of the open gl features. I have already downloaded installed the latest drivers so Im not so sure that that would be the problem.
I know my graphics card supports it because I was using the rotate tool on this same document yesterday. How ever when i started it up today It no longer worked. I haven't installed anything since I used the rotate tool last (except for the latest drivers for my nvideo geforce gtx 460 gfx card, how ever this was an attempt to fix the problem)
I tried running the 64 bit verision of Ps but the results were the same.
My system is running
windows 7 64 bit
Intel core 2 duo 3.0 Ghz (dual core processor)
8 GB ddr2 ram
Nvidia GeForce GTX 460
(with 2 identical moniters connected via dvi)
Adobe Creative Suite CS5 Design Premium
Wacom Bamboo pen and touch w/ matching drivers
Belkin N52TE gaming pad with photoshop short cuts mapped to it.
Im not sure what else I can list that might be related
I made no system changes since the last time i ran photoshop.
I unplugged the wacom tablet for 5 minutes last night in order to install the drivers on another computer and when it was done i moved it back (Im fairly sure this couldn't have caused it but better to give all the info i guess...)
I would greatly apreciate any help you might be able to offer.

some one i know suggested that I try an older driver in case it was a bug with the latest one. I did so and once again It worked untill i closed photoshop. I closed and reopened the program to test it and sure enough when i reopened it all open gl functionality was gone once again. I don't believe nvidia drivers are the problem because i have tried 3 different version with the same results. each one works untill i close photoshop and the second time i open photoshop it quits working.
do any of you at adobe have any idea what might be causing this?

Trouble with clipping paths in Photoshop CS5

Hello everyone, I am having trouble with clipping paths in Photoshop CS5. When I start a new path both path and anchor points are not visible. working on a Layer not background 0 and a Path Layer was created.I've also noticed that Photoshop started running pretty slow. All other programs are fine. Any Ideas or suggestions? Thank You

edtGrfx wrote:
Hello everyone, I am having trouble with clipping paths in Photoshop CS5. When I start a new path both path and anchor points are not visible. working on a Layer not background 0 and a Path Layer was created.
What do you mean by "a Path Layer was created"? Path are in the path palette, there is a path in shape layers and they is a path in a vector layer mask. I have never seen a reference to a path layer before this. When a path in the path palette is selected activate it wall also be shown in the image window. Does not matter if there is a targeted layer or not. Control points may or may not be displayed. Using Path tool you can select and select segments and show some or all control points, Path are editable.
View the following image in a new tab and scale to actual pixels for a clear image this site scales image poorly.

I'm having issues with text layers in photoshop. Text layers show it's there but not visible on the canvas.

I'm having issues with text layers in photoshop. They aren't visible. I've checked font size, alignment, layer order and color. And the layer list shows that it's there. All seems well but I still can't see the text that I write. Need help trouble shooting. (I asked this question about a month ago but I got sidetracked and never circled back.) Thanks.

Please refer to your original topic (Text Layer not Visible.) instead of posting a new topic.

Mouse issue in all products including photoshop cs5/cs6

Hello! I'm having severe mouse issues with all CS5 and CS6 products.
The mouse will only do single click, and when pressing down on any of the mouse button, nothing functions. So, I'm only able to make a dot with any of the tools! I haven't had this much issues since I installed microsoft products.. please help!!! Also, there's no preference clear in this program, and I've tried the silly option + ctr+shift+ but it didnt work
Windows 7x64
Running trial version cs6

Funny, got the same issue and i can't find anything to help that out. Cyborg RAT9 mouse, Wacom Intuos 4 and even the Apple magic mouse can't make that long click we are looking for. So it cannot be anything else then Photoshop it self. Other Adobe products are working perfect. I'll allready try to reinstall, reboot, cs5, 32 bit 64 bit versions... But noting helps, Photoshop won't work right... like i would buy a +800 euro application that doens't even work as its should
Message was edited by: Blurr_designs

Drawings with Wacom Pen Tablet in CS5

I am aged 66.One of my contacts(22yrs, who is an artist can visualise scenes and draw
sketches) and photographer(also doing 2nd year diploma in photography) has shown me the following
image and asked how could this be created. I have reasonably good command in cs5(Why writting
reasonably is I find stalwarts here in the forum). I have basic exposure in AI by virue of purchasing
the Production premium CS5.I am sure best drawings are drawn in AI. I did not till date seen how a
Wacom tablet works.The person for whom I am writting this is an upcoming personality with great zeal
for learning . With my little knowledge in Wacom pen Tablets, I told him that this can also be done
in Photoshop with Wacom Pen tablet.I want confirmation for my statement. I will be thankful if
someone states that brushes in CS5 are sufficient or any more are to be purchased if so links for it.__Bosu Babu

I'm just looking to get a Wacom Intuos 4 myself, so no practical experience here yet, but...
A YouTube search for "how to create cartoon in photoshop" turns up a lot of recordings of people doing just what you're asking.
-Noel

Driver issue with GTX470 and GTX570 in CS5.03

So we have two different video cards as we can't find the GTX470 easily anymore.
Both computers when the video card driver is updated to a newer version the video is displayed weird.
The rest of the hardware is the same on both computers Core i5 3.3ghz, 8gb ram, msi motherboard, and RT.X2 matrox card.
This also happens on Preview and Program as well, unless the video is stopped, but while playing it always does this.
I was able to fix the problem by going to an older version of the drivers. The GTX570 is using 275.33, and the GTX470 is using 280.26.
I haven't really had too much time to mess around with the video drivers on the GTX570 as I needed to get the computer up and running ASAP so I just grabed an older driver off of nvidia's website. Which is the reason the GTX570 drivers are older than the GTX470.
Now is this an issue with the RT.X2 card or something with premiere?
The GTX570 system is a clean install.
I manually added the GTX570 to the cuda support list in order to get it to work on CS5.03

The problem lies with Matrox itself: Matrox has never provided bug-free drivers to begin with. Every single driver release from them fixed one problem but created a new problem - and yet they still failed to fully fix the same problem that plagues their drivers for ages.

Problem with multiple downloads of photoshop cs5!! help!!

Hi, I have adobe photoshop cs5 which i download from the adobe website. i downloaded it on my laptop, which has since stopped working properly. so i deactivated it permanently like a website said i should. i already have creative cloud on my new laptop, and I've been using the trial so far. its expired now, so i entered the serial code for my photoshop from my old computer. but it didn't work! it says the number is invalid. even without deactivating my old photoshop it should have worked because you are supposedly allowed 2 downloads on separate computers. why dint it working? what did i do wrong?

CS5 has nothing to do with Creative Cloud. they are separate versions. You need to actually install CS5.
Download CS5 products
Mylenium

Problem With File Crashing in Photoshop CS5

Hello I have a design file that I just created in Photoshop CS5 last night. I went in to do some editing today and it keeps craahing within a few seconds of being opened. I have never had this problem with a file before and I need it to turn in at work. ANy helpful ideas out there on what may be happening? It's happened at least twenty times now....

If you do a search, you will find several threads dealing with file corruption in CS5/ CS5.1. The long and short of it is, that the file is a goner, but feel free to try things like opening it in another program (Art Rage, Corel Painter, GIMP) or image viewer (XnView, ACDSee) to recover at least parts of it...
Mylenium

Problem printing with Epson 3800 and Photoshop CS5

I came across a problem trying to print with my Epson 3800 in Photoshop CS5. I recently upgraded to Photoshop CS 5 (and Lightroom 3). I tried to print using my Epson 3800 with CS5 but could not adjust Print Settings, Color Mamagement, Paper Configuration, Expand Border because those options are unavailable and there is a line crossing through them. I get a message that says "The bundle 'Print Setting' could not be loaded because it does not contain a version for the current architecture". It then says to contact the creator listed here for the latest version: PrintSetting version 3.57, Copyright SEIKO EPSON CRP 2001-2006. I can print through Photoshop CS4 as usual, but CS5 is a problem. I haven't tried printing though Lightroom 3 yet, and have not typically used Lightroom to print, but I wonder if that will be a problem too?
Any help will be appreciated.

If you run CS5 or LR as a 32bit application you will have all these option available to you. You can then save these options as presets that can then be applied when you are running the applications in 64bit mode even if you can not access them individually.
Also you might want to check Epson's download site especially the European site to see if there are newer drivers or updates for your printer. The newest drivers for other printers like the 7600/9600 support application running in 64bit mode.
Doyle

Issue with Fonts Corrupting in ID CS5

We've been using the Helvetica LT Std type family forever in our marketing materials. While it's not the greatest font family anymore, we still want to stay consistant. Recently upgraded our machines, and software (CS3 to CS5) and are now having issues with those fonts corrupting. Basically, they randomly throw "superscripts" and glyph type symbols throughout the document (see below). If I switch it out to a different font, sometimes it works, sometimes it doesn't. Has anyone ever come across this?
Regards,
David

Mac OS X 10.6.4
I've uploaded all of my typefaces in Font Book. When I remove the Helvetica LT Std family from Font Book and then try opening the document again, it tells me that the fonts are missing. Meaning, it's not pulling a different font.
The weird thing is when I select the type change it to "Impact" the characters display correctly. When I change it to "Myriad" they are still corrupt. There doesn't seem to be any rhyme or reasonings to the why.
And thanks for the link, I've started reading through the key sections of that. WIth the fonts coming up missing when they are removed from Font Book, it doesn't appear to be that. So confused.

3D Text with Repoussé in Adobe Photoshop CS5 Extended | CSInsider | Design | Adobe TV

In this episode of CSInsider, Rufus Deuchler, Worldwide Design Evangelist at Adobe, introduces you to how easily you can extrude text in Adobe Photoshop CS5 Extended to create fully fledged 3D objects. These 3D objects can then be rendered using Photoshop's own Raytracing engine, including cast shadows. This feature lets you add a 3D flair to your 2D images.
http://adobe.ly/yzsIs4

When I go into either CS 5.5 extended, the 3d features are ALL greyed out??? What is wrong?

Help with Threshold Adjustments in Photoshop CS5

Histogram in Threshold Adjustments is just one stright line in Photoshop CS5 on my main computer but when I do the same thing on my laptop it shows the histogram and works fine. Does anyone have an ideas why the one on my main computer is not working

Please post a screen grab showing your desktop, Photoshop, and the Threshold dialog, and Mylenium's diagnosis can be confirmed, or someone can likely tell you whether it's because of something you have done (e.g., selecting just part of the image or something).
-Noel

Problem with Wacom Tablet in Photoshop

Hello.
I'm currently using Adobe Photoshop CS3 on Windows XP with an Wacom Intuos 3 tablet.
The problem I'm having is that when I use the tablet pen to click anywhere in
Photoshop, the cursor essentially locks in place and does not move. On the canvas, this means I can only place dots. This happens whether I'm clicking on tools, scrollbars, etc...
I used to be able to use it fine in CS2, but then it stopped working on day, and I thought that maybe upgrading would solve the issue. However, this has just left me with the same issue.
The pen does work normally in all other programs, such as in MS Paint or when clicking and dragging to select icons on the desktop. Also, clicking and dragging with a mouse works normally.
Any help would be appreciated! Thanks so much in advance.

Thanks Hunt, I'll give that a shot and see.
I'm not quite sure what you mean, Martha. It used to function in Photoshop perfectly fine, but no longer works.
I have added Photoshop to the Wacom prefences manager that changes pen pressure and things, but I have a feeling you're referring to something else.

Batch Printing with File Names in Photoshop CS5

How can I batch print hundreds of images with the file name on each of the print? I also need them to be printed at their original dimensions, which mean they should not be scaled when printed to papers. Any help would be greatly appreciated. Thanks.

Thanks for your response, Noel. However, the images to be printed at their actual dimensions and resolution (300ppi). This is so that we can see how their qualities are going to be when they are printed the actual publication, which is at 300ppi.
What I used to be able to do in CS3 is creating an action in Photoshop that contains a print command with "label" or file name option on. Then I ran the script through the batch command in Bridge. However, in CS5, when I tried to same method, all of the images are printed at 1/2 an inch while they are actually 3-5 inches at 300ppi. Therefore, I am trying to another method that would give me the same result.

Issue with Wacom Intuos3 in Photoshop CS5

Similar Messages

Maybe you are looking for