Issue with web part connections : won't display data when the lookup field is a calculated field

Hello,
I have a list A with a calculated field named A.A. I have a list B that has a lookup field to list A, to field A.A, named B.A. I add the two lists in a wiki page and I try to connect them - I.E., select a row from A and the rows from B would be automatically
filtered.
The B\Connections\get filtered values from A and select Provider:A.A, Consumer B.A doesn't bring any results. If I do the exact opposite: A\Connections\get filtered values from B and select Provider:B.A, Consumer A.A  works fine. But, this is not what
I want.
If the A.A isn't calculated field, everything works fine. So, it looks like there's an issue with calculated fields acting as consumers.
Is this a known issue and are there any know workarounds? A workaround is to abandon calculated field and  use sharepoint designer workflow.
Thank you
Christos

Hi,
According to your post, my understanding is that you had issues about connecting web parts.
I try to reproduce the issue, however, everything works well.
Create a custom list named List A, add a caculated column named A.A(Formula: =Title).
Create a custom list named List B, add a lookup column named B.A(List A: A.A).
Create a page and then insert the two list view web parts.
Edit page, select List B->Connections->Get Filtered Values From List A.
Then I can filter the List B.
I recommend to create another caculated column and get filter value form it to check whether it works.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Similar Messages

  • Custom web parts in SharePoint 2013 becomes inactive when the session is idle for long time.

    Hi,
    We have a search center site with custom web parts and custom master pages. When the session is inactive for long time all the custom web parts in the page doesn't work, unless we close the browser and open it. Where as this is not the case with the
    OOB web parts. We are not able to identify the root cause as it works with OOB web parts and not the custom web parts.We were able to find that by increasing the session timeout of the web application we can avoid this issue.We do not want to increase the
    session timeout as the OOB web part works perfectly even when the user session is idle for long time.Is there any other alternative where we can acheive the same for custom web parts when the session is idle for long time?
    Thanks,
    Saranya

    Hi Saranya,
    According to your descirption, my understanding is that when the session is long time idle ,then custom web part will not work.
    I suggest you check if you have enable the session in the Page Level in the web.config. By default SharePoint disable the session state.
    In the web.config, you will see <page enableSessionState> tag. You can modify like below and test if it works.
    <pages enableSessionState=”true” ….. />
    Here is a detailed thread for your reference:
    Use Session State in SharePoint
    Best Regards
    Zhengyu Guo
    TechNet Community Support

  • Possible issue with Web service connections in SP3

    Hello,
    I installed Xcelsius 2008 SP3 over SP2 and some of my input values for my web service connection were not being built into the XML request. I then rolled back to 2008 SP2 and all was fine. Not a thing i tried could fix it, and it was not all the input values just some of them and the same ones each time. Perhaps i installed different Xcesius suites: the SP2 one i have is trial version and has a black BO splash, the SP3 one has a yellow SAP splash. SP3 has some funky enhancements so i would certainly like to go that way. Any ideas? Or ideas as to how i could get this into BO support for troubleshooting?
    Regards,
    Gilbert

    By mistake I posted to this thread. Removing my message.
    Edited by: Anil Kumar on Dec 24, 2009 4:55 AM

  • I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?

    I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?

    Hi An Iphone user,
    If you are having issues deleting a specific message from an iMessage conversation (not seeing the Trash icon), you may want to double-check that you are following the steps outlined in the following article:
    How do I delete a message?
    To delete a message, tap and hold the message bubble, then tap More.
    Tap Delete All to delete all the messages. Or tap to select the messages you want to delete, then tap .
    After you delete a message, you can recover it only by restoring from a backup.
    Send messages with your iPhone, iPad, or iPod touch - Apple Support
    Regards,
    - Brenden

  • Issues with our SSL connection to the Web dispatcher

    HI Alle,
    I having issues with our SSL connection to the Web dispatcher with SAP Web AS. Below is the error in the log files form dev_webdisp:
    Started service 80 for protocol HTTP on host "wdpeht1"(on all adapters) (processing timeout=120, keep_alive_timeout=30)
    [Thr 368] =================================================
    [Thr 368] = SSL Initialization  on  PC with Windows NT
    [Thr 368] =   (701_REL,Jan 28 2010,mt,ascii-uc,SAP_UC/size_t/void* = 16/64/64)
    [Thr 368]   profile param "ssl/ssl_lib" = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
               resulting Filename = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
    [Thr 368]   profile param "ssl/server_pse" = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
               resulting Filename = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    [Thr 368] =   found SAPCRYPTOLIB  5.5.5C pl29  (Jan 30 2010) MT-safe
    [Thr 368] =   current UserID: WDPEHT1\SAPServiceWDP
    [Thr 368] =   found SECUDIR environment variable
    [Thr 368] =   using SECUDIR=E:\usr\sap\WDP\W00\sec
    [Thr 368] * ERROR =>   secudessl_Create_SSL_CTX():  PSE "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" not found! [ssslsecu.c   1354]
    [Thr 368] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
      secude_error 4129 (0x00001021) = "The PSE does not exist"*
    [Thr 368] >> -
    Begin of Secude-SSL Errorstack -
    >>
    [Thr 368] ERROR in SSL_CTX_set_default_pse_by_name: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    ERROR in ssl_set_pse: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    ERROR in af_open: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    ERROR in secsw_open: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    ERROR in secsw_open_pse_or_extension: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    ERROR in sec_get_PSEtype: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    [Thr 368] << -
    End of Secude-SSL Errorstack -
    [Thr 368] * ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create SERVER Credential
            for "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" [ssslxxi.c    2278]*
    [Thr 368]* ERROR => Initialization of SSL library failed -- NO SSL available!
    [Thr 368] =================================================
    [Thr 368] <<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_PSE_ERROR*
    [Thr 368] *** ERROR => IcmAddService: SapSSLInit (rc=-40): SSSLERR_PSE_ERROR [icxxserv.c   319]
    [Thr 2128] IcmCreateWorkerThreads: created worker thread 0
    Regards

    Hi Olivier,
    Thanks for replay,
    The PSE does exist  in my SEC "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"  .
    I did tried Again I get  this error. I think I missing som parameter
    = SSL Initialization  on  PC with Windows NT
    [Thr 2292] =   (701_REL,Jan 28 2010,mt,ascii-uc,SAP_UC/size_t/void* = 16/64/64)
    [Thr 2292]   profile param "ssl/ssl_lib" = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
               resulting Filename = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
    [Thr 2292]   profile param "ssl/server_pse" = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
               resulting Filename = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    [Thr 2292] =   found SAPCRYPTOLIB  5.5.5C pl29  (Jan 30 2010) MT-safe
    [Thr 2292] =   current UserID: WDPEHT1\SAPServiceWDP
    [Thr 2292] =   found SECUDIR environment variable
    [Thr 2292] =   using SECUDIR=E:\usr\sap\WDP\W00\sec
    [Thr 2292] -*ERROR =>   secudessl_Create_SSL_CTX():  PSE "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" not found! [ssslsecu.c   1354]
    [Thr 2292] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
      secude_error 1281 (0x00000501) = "open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned"*-
    [Thr 2292] >> -
    Begin of Secude-SSL Errorstack -
    >>
    [Thr 2292] -*ERROR in SSL_CTX_set_default_pse_by_name: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"*-
    -*ERROR in ssl_set_pse: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
    ERROR in af_open: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"*-
    ERROR in secsw_open: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
    ERROR in secsw_open_pse_or_extension: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
    ERROR in sec_get_PSEtype: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
    ERROR in aux_read_PSEFile: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
    ERROR in aux_file2OctetString: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
    [Thr 2292] << -
    End of Secude-SSL Errorstack -
    [Thr 2292] *** ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create SERVER Credential
            for "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" [ssslxxi.c    2278]
    [Thr 2292] *** ERROR => Initialization of SSL library failed -- NO SSL available!
    [Thr 2292] =================================================
    [Thr 2292] <<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_PSE_ERROR
    [Thr 2292] *** ERROR => IcmAddService: SapSSLInit (rc=-40): SSSLERR_PSE_ERROR [icxxserv.c   319]
    Her is my profile parameter for https.
    h6*#Https parameters for Web dispatcher  E:\usr\sap\WDP\W00\sec
    #icm/server_port_0 = PROT=HTTPS,PORT=443$$
    DIR_INSTANCE = E:\usr\sap\WDP\W00\sec
    ssl/ssl_lib = E:\usr\sap\WDP\W00\sec\sapcrypto.dll
    ssl/server_pse = E:\usr\sap\WDP\W00\sec\SAPSSL.pse
    wdisp/ssl_cred = E:\usr\sap\WDP\W00\sec\SAPSSL.pse
    ssf/ssfapi_lib = E:\usr\sap\WDP\W00\sec\sapcrypto.dll
    sec/libsapsecu = E:\usr\sap\WDP\W00\sec\sapcrypto.dll
    ssf/name = SAPSECULIB
    wdisp/ssl_encrypt = 0
    icm/server_port_1=PROT=HTTPS, PORT=8400, TIMEOUT=120
    ###icm/server_port_1=PROT=HTTPS, PORT=44302, TIMEOUT=900 (old)
    ########icm/server_port_0 = PROT=HTTP,PORT=80, TIMEOUT=120
    icm/HTTPS/verify_client=0
    wdisp/add_client_protocol_header = true
    wdisp/auto_refresh = 120
    wdisp/max_servers = 100
    wdisp/ssl_auth= 0
    ms/https_port = 8400
    wdisp/HTTP/use_pool_for_new_conn=1
    wdisp/HTTPS/dest_logon_group = HTTPS
    #wdisp/server_info_protocol = https
    #wdisp/group_info_protocol = https
    #wdisp/url_map_protocol = https
    wdisp/ssl_ignore_host_mismatch = fals
    icm/HTTPS/forward_ccert_as_header = true
    icm/HTTPS/trust_client_with_issuer = CN = SAP CA,*
    icm/HTTPS/trust_client_with_subject = CN = sapwebdisp,*h6
    Regards

  • Save as template kill the web part connection

    Hi,
    I have a Sharepoint web site and I would like to save it as a template in order to create several site with the same structure and the same web pages.
    On some of my web part pages I have some webpart connected to each other (mostly BDC List web part and BDC related list web part). When I save the site as a template and create a new site based on this template most of the connection are not present in the
    new site. Does anyone know what is the problem and how to solve it? I really need this to work as the site template will contains tens of pages with those connection and we will have to create tens of site with that template so manually recreating the connection
    is not possible.
    Thank you for your help.

    No web part connections are managed by sharepoint and are stored on the page on which the connected web part are as I know.
    Any way I managed to find a solution. I deleted all the web part connections (Open sharepoint designer and deleted all the SPWebPartConnection tags.) and then I recreated all the connections within the browser.  I don't know why but now it works.
    The mysteries of SharePoint are endless.

  • 502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream cont

    I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
    502 - Web server received an invalid response while acting as a gateway or proxy server.
    There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
    Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

    When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
    ARR version installed is 3.0
    To throw more light on the configuration:
    Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
    All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
    Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
    Edge : Windows 2012 with Lync 2012 Std - 1 No 
    (192.168.11.101 DMZ) in workgroup
    ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
    Certificate : Internal Domain root CA for internal and External (Digicert).
    Internal Network : 192.168.10.x /24
    External Network (DMZ) : 192.168.11.x /24
    Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
    Edge has : sip.domain.com, webconf.domain.com, av.domain.com
    IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
    Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
    Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
    Internal AD Integrated DNS pointing Front-end
    Type of Record FQDN
    IP Description 
    A sip.domain.com
    192.168.10.100 Address internal Front End  or Director for internal network clients 
    A admin.domain.com
    192.168.10.100 URL Administration pool
    A DialIn.domain.com
    192.168.10.100 URL Access to Dial In 
    A meet.domain.com
    192.168.10.100 URL of Web services meeting
    A lyncdiscoverinternal.domain.com
    192.168.10.100 Register for Lync AutoDiscover service to internal users
    A lyncdiscover.domain.com
    192.168.10.100 Register for Lync AutoDiscover service to external users  
    SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
    sip.domain.com Record pointer services to internal customer connections using TLS 
    External DNS pointing Edge & Proxy
    Type of Record FQDN
    IP Endpoint
    A sip.domain.com
    x.x.x.100 Edge
    A webconf.domain.com
    x.x.x.100 Edge
    A av.domain.com
    x.x.x.100 Edge
    SRV _sip._tls.domain.com
    sip.domain.com: 443 Edge
    SRV _sipfederationtls._tcp.domain.com
    sip.domain.com:5061 Edge
    A Meet.domain.com
    x.x.x.110 Reverse Proxy
    A Dialin.domain.com
    x.x.x.110 Reverse Proxy
    A lyncdiscover.domain.com
    x.x.x.110 Reverse Proxy
    A lyncweb.domain.com
    x.x.x.110 Reverse Proxy
    In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
    In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
    The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
    a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
    Certificate was installed properly.
    b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
    HTTP Response Headers:
    Content-Length: 1477
    Content-Type: text/html
    Date: Wed, 14 May 2014 10:03:40 GMT
    Server: Microsoft-IIS/8.0
    Elapsed Time: 1300 ms.
    Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

  • Issue with MSSQL server connectivity from ODI 10.1.3

    Hi,
    In one of the interface we are populating data to target table in MSSQL server version 2005.
    The physical topology connection results successful.
    Since so long there is no problem and it is running successful. But suddenly I'm facing issues with this.
    I cannot see teh datastores under the model created for this table. When expanding the model, when trying to reverse the model or when I am trying to save any changes in the package I am getting the below error.
    java.lang.UnsupportedClassVersionError: com/microsoft/sqlserver/jdbc/SQLServerDriver (Unsupported major.minor version 49.0)
         at java.lang.ClassLoader.defineClass0(Native Method)
         at java.lang.ClassLoader.defineClass(Unknown Source)
         at java.security.SecureClassLoader.defineClass(Unknown Source)
         at java.net.URLClassLoader.defineClass(Unknown Source)
         at java.net.URLClassLoader.access$100(Unknown Source)
         at java.net.URLClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClassInternal(Unknown Source)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Unknown Source)
         at com.sunopsis.sql.SnpsConnection.a(SnpsConnection.java)
         at com.sunopsis.sql.SnpsConnection.u(SnpsConnection.java)
         at com.sunopsis.sql.SnpsConnection.connect(SnpsConnection.java)
         at com.sunopsis.dwg.reverse.Reverse.a(Reverse.java)
         at com.sunopsis.graphical.component.b.a.g.a(g.java)
         at com.sunopsis.graphical.component.b.a.g.a(g.java)
         at com.sunopsis.graphical.component.b.a.d.a(d.java)
         at com.sunopsis.graphical.component.b.h.e(h.java)
         at com.sunopsis.graphical.component.b.h.b(h.java)
         at com.sunopsis.graphical.component.b.h.b(h.java)
         at com.sunopsis.graphical.component.b.h.b(h.java)
         at com.sunopsis.graphical.component.b.h.a(h.java)
         at com.sunopsis.graphical.frame.module.SnpsSplitFrame.refreshSplitFrame(SnpsSplitFrame.java)
         at com.sunopsis.graphical.frame.module.SnpsSplitFrame.refreshNode(SnpsSplitFrame.java)
         at com.sunopsis.graphical.frame.bp.bN(bp.java)
         at com.sunopsis.graphical.frame.bp.bL(bp.java)
         at com.sunopsis.graphical.frame.a.is.bH(is.java)
         at com.sunopsis.graphical.frame.bo.r(bo.java)
         at com.sunopsis.graphical.frame.bo.bv(bo.java)
         at com.sunopsis.graphical.frame.bo.z(bo.java)
         at com.sunopsis.graphical.frame.bo.b(bo.java)
         at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
         at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
         at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
         at java.awt.Component.processMouseEvent(Unknown Source)
         at java.awt.Component.processEvent(Unknown Source)
         at java.awt.Container.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Window.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)
    I have verified below:
    The SQL server version is: MSSQL server 2005
    the "sqljdbc.jar" file is there in place "<ORACLE_HOME>/oracledi/drivers"
    Java version: jdk1.5.0
    There is no change in source or target db. Please help me to fix this issue

    Hi,
    Thanks for the reply. The link is helpful and its the same what is there in the environment.
    "The JDK version is 1.5 and JRE version is 1.4.2."
    But, this was working fine till last week. I am worried, if the issue is due to version compatability why we were not facing this issue before. There is no changes in the environment since go live of this interface.
    Thanks,

  • Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home.  After software updates, Apple support suggested I reboot my router which works.  But now I have to do it every other day.  ????

    Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home.  After software updates, Apple support suggested I reboot my router which works.  But now I have to do it every other day.  ????  AT&T my DSL carrier suggests I get a new router.  Apparently the one I have is really old and doesn't support my Macbook Pro.  Does this sound right?

    If your using WEP encryption yes, Apple has discontinued that becaues it's worthless. WEP (and WPA) is cracked so encryption makes no sense.
    Get a new Wireless N router, set it up with WPA2 (AES) Personal and two different 20+ randon letter/numbersymbol character passwords
    One for Admin access only of the router, keep this on paper off all comptuers in a safe someplace.
    One for entering into devices, computers etc for Internet Access Only.
    You need the long and random password to defeat brute force attacks by GPU software that the hackers have now.
    Also if you give out the password to another, they can't hack the network with the guest access password.
    Computers remember the internet password, so anyone with access to your machines or network will have the password.
    Since you have another Admin only password, they can't hack in. got it?
    You don't need "Invisible" or "MAC Address filtering" that's a waste of time as hackers can sniff a network and causes issues getting on the network.
    Good luck.

  • Private Photos App - pictures not displaying This app was working fine, then suddenly it won`t display any of the photos.

    This app was working fine, then suddenly it won't display any of the photos. One day the photos were there, gone the next. It still shows how many photos are there but just shows a white screen. I can't export anything to the photo album. Adding photos to existing folders yields the same result, only white screen displayed. However, I can create new albums and add photos to those without issue. Does anybody know how to recover the "missing" photo"  I was going to try reinstalling the app but it's no longer available in the iTunes App Store. Thanks, Tracy

    1, you can't at the moment, though with iOS 5 in the Autumn, from http://www.apple.com/ios/ios5/features.html#photos :
    Even organize your photos in albums — right on your device
    2, by removing it from you synced from and re-syncing. Only photos taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad (either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view)
    3, the location of the photos that you synced to the iPad should be listed on the iPad's Photos tab when connected to your computer's iTunes.
    4, you can copy the photos from your iPad to your computer : http://support.apple.com/kb/HT4083 . You should also be able to delete them from the iPad as part of the transfer process to your computer, and it's then your choice whether to add them to your sync photo list so as to copy them back to the iPad. Copying them to your computer would allow you to organise them into folders and therefore be able to sync them back into separate albums.
    5, I don't use Dropbox either. There are some third-party browser apps in the iTunes App Store that allow you to download pages so that you can view them when offline e.g. Atomic Web (the whole page is saved within Atomic Web, it doesn't place a photo into the Photos app)
    6, deleting content should help. If you remove an app from your iPad then you also remove the content that it's got on the iPad - so if you then decide to reinstall it back onto the iPad then you will need to manually add back any content that you want in it. None of the Apple built-in apps (including Photos) can be removed from the iPad

  • Hp 110-a04 won't display video when my 5670 is plugged in.

    So here's the dealio. Bought a myself an hp 110-a04, threw in the sapphire 5670, doesn't display anything and I get a 6 long beeps beep code. Kill me.
    So, I take out the original PSU (it's only 180 watts), throw in a 400 watt power supply,  toss in the GPU aaaaannnnnnd... still won't display anything and the beep code is back (in the old PC it was in worked fine with the 250 watt psu).
    The computer works perfectly fine without the card, boots up, actaully displays stuff when plugged by VGA. Why it won't display anything is absolutely beyond me. Everything is hooked up to the new PSU, it's just that nothing works with that graphics card in.
    Halp me.

    Hello @HAIRSHAMENSTUFF,
    I understand that you are having issues getting the sapphire 5670 to work with your HP 110-a04 Desktop PC. I suspect that you will have to enable legacy devices in your BIOS. Unfortunately, I do not have access to the BIOS for your computer to provide you with step by step instructions, but if you tap F10 on startup and enter the BIOS you can browse through until you find a way of enabling legacy support or mode.
    I hope this helps. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • I need to get the logs of my iPhone 5. I'm a registered as a developer and I have an issue with one of my app which is already in the market

    I need to get the logs of my iPhone 5. I'm a registered as a developer and I have an issue with one of my app which is already in the market

    The Firefox 3.5.x branch has reached end-of-life and is no longer maintained.<br />
    You will no longer receive security updates.<br />
    You can update Firefox via "Help > Check for Updates" or download and install the latest Firefox 3.6.x.<br />
    Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
    * http://www.mozilla.com/firefox/4.0/system-requirements/
    If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox program and save the DMG file to the desktop
    * Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
    * Trash the current Firefox application to do a clean (re-)install
    * Install the new version that you have downloaded
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

  • HT4623 since i updated my iphone 4 to ios 6, i ve noticed that the wifi connection turns off each time when the screen is locked. I need to be connected with wifi all the time so as to stay updated with all my emails.

    since i updated my iphone 4 to ios 6, i ve noticed that the wifi connection turns off each time when the screen is locked. I need to be connected with wifi all the time so as to stay updated with all my emails. is there anyway for this problem.
    (PS: i know we could use 3G but i want to use wifi instead)

    I am having a really wierd issue as well that is probally related. I dont see 95% of the album artwork associated with my music. Also, it seems as if this has gotten worse since I started using that match feature

  • Help! iWeb won't open properly after I updated to Yosemite. No old websites, no workspace- nothing is displayed even when the app is open. HELP!

    Help! iWeb won't open properly after I updated to Yosemite. No old websites, no workspace- nothing is displayed even when the app is open. HELP!

    To open your domain file in Lion, Mountain Lion or Mavericks or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with AppleScript Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script"/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"
    delay 1
    tell application "iWeb" to activate
    You can download an already compiled version with this link: iWeb Switch Domain. Note:  you may have to Control (right) - click on the app after uncompressing and select Open due to the Sandboxing feature of OS X.  If you have problems with the app create your own with AppleScript Editor.
    Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible in Lion or Mt. Lion enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
    For Mavericks and Yosemite go to your Home folder and use the View ➙ Show View Options menu to bring the this window:

  • I've been having an issue with assistive touch, every time I open an app. the AT disappears the from the screen and I have to turn it off and ON again. Is there a way to fix this?

    I've been having an issue with assistive touch, every time I open an app. the AT disappears the from the screen and I have to turn it off and ON again. Is there a way to fix this?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

Maybe you are looking for

  • AD PROVISION ERROR on MY OTEHR MACHINE ITS WORKING BUT NOW ????

    Hi Alll I want to the AD Provisioing so i do all what all step is required and Attach Certificate with KEYTOOL COMMAND and sucessfully created also under C:\j2sdk1.4.2_15\jre\lib\security folder, then i use the C:\j2sdk1.4.2_15\jre\lib\security>keyto

  • How to show icons startup manager

    Hi ! I'm gooing to try a multi boot hard drive. There is a Mac OS X 10.5 boot, a Mac OS X 10.6 boot, a Mac OS X 10.7 boot and an OS X 10.8 boot. For 10.5 and 10.6 Boot the volumes icons are showed, but not for 10.7 and 10.8. I have just do apple-c /

  • Application Storage - Free memory is zero

    Need URGENT  help for my mobile  issue ( Model 9220 Curve )  - Application Storage - Free memory is zero ( Tried reaching Blackberry Support in India - NO RESPONSE  )  1. Getting Supplimentary Service failure : General Error - Comes on re-booting thi

  • Premiere CS4 doesn't work on Windows 7

    I have a delicious new Windows 7 edit suite I built for nearly 3 grand, and Adobe Production Premium CS4. Premiere doesn't work properly. I urgently need to edit a TV documentary. I don't have time to mess around, that's why I paid for the software r

  • IMac G5 is crashing during start

    Hi boys & girls... i have a mac, iMac G5 with 1,8 GHz - PPC Updated with 1GB RAM and 400GB HDD. Bevor i have upgraded with this hardware, i have a kernel panic. so, i think... okay, lets upgrade - maybe its away. but, they is not away :/:( sometimes,