Issue with Weblogic services in Linux OBIEE 11G

Hello All,
I have a OBI 11G set up on a linux OS.I am facing a issue with weblogic service.
Whenever I am trying to start the Admin server from command line using its .sh , it is starting successfully.
But whenever I am closing that Linux session or coming out of the Admin server log , this service is getting stopped on its own.
OBI is working perfectly when that Linux session and Admin server log is intact, but as soon as i close either of them Admin server shut itself down.
Please any help on this will be appreciated.
Thanks,
Bhavnesh

Hi Bhavnesh.
Try this way and let me know the outcome.
nohup ./startWeblogic.sh -Dweblogic.management.username=Username -Dweblogic.management.password=password & tail -f nohup.out
Mark if helps,
Thanks,

Similar Messages

Issue with Skip Level Hierarchy in OBIEE 11g

Hi,
I have implemented Ragged and Skip Level Hierarchy as explained in the links below in OBIEE 11g RPD.
(checked the 'Ragged' and 'Skipped Levels' check boxes)
http://www.rittmanmead.com/2010/07/obiee-11gr1-support-for-ragged-skip-level-value-based-hierarchies/
http://docs.oracle.com/cd/E17904_01/bi.1111/e10540/dimensions.htm#BABFBBFG
When the Presentation Hierarchy is dragged in the OBI Answers, the leaf level beyond the skip (null) levels is not shown in the report.
When any level finds intermediate null values, OBIEE is failing to show the existing value of the leaf level (Most Granular Level) or any values after Skipped Levels.
For example, following is the values in database for different levels of department hierarchy.
A -> B -> C -> Null -> Null -> F
The OBIEE Presentation Hierarchy can only drill down till C, not beyond that. (does not show the leaf level value 'F').
Could you please suggest whether I am missing any step?
Thanks.

Hi, My problem is that in my report it is showing me that levels as -- A -> B -> C -> Null -> Null -> F, however I want to show data as A -> B -> C -> F, i.e the null valus(columns) should be skipped. Please help.
Thanks and Regards,
Deepak

Starting obiee weblogic services in linux after simple installation

Hi all,
I have installed OBIEE 11g on linux machine with "simple installation" option, i have following questions:
with simple installation, will weblogic server will get installed?
because i am not able to open the weblogic EM page, now do i have to manually start the weblogic services in linux, if so. Can anyone illustrate the steps.
Thanks,
Sreekanth

Hi sreekanth,
with simple installation, will weblogic server will get installed?Yes it will be installed.
because i am not able to open the weblogic EM page, now do i have to manually start the weblogic services in linuxstart it manually or go to windows start/BI/start all services like that way weblogic server should start.
Nice information on linux servers up/down http://prolynxuk.com/blog/?p=375
hope answers your question.
Cheers,
KK

Any issues with using LDAP on LINUX for GRC 5.2 UME?

Our company is converting our LDAP servers from AIX to LINUX. The DNS name used in our UME connection should not change. Are there any issues with using LDAP on LINUX? We are currently on GRC 5.2 SP9 (in the middle of upgrading to SP12).
Also, I have been trying to connect our test UME system to a test LDAP box that has already been converted to LINUX but keep getting a 'connection failed' error when I try to test it.
Do you have to reboot the server to test changing the LDAP connections? I've been trying it by going into UME, pulling up the LDAP tab, hitting the Modify button, entering the new userid and password for test LDAP, and hitting the Test Connection button. I've verified that this userid and password is correct for test LDAP.
Is there a way to get more information about why the connection failed?
Thanks.

I've been told by our LDAP Support group that none of the other configuration settings should have to be changed. I should only have to change the id and password to connect to a test version of LDAP instead of our regular connection to the production LDAP.
Can you test a connection for a different userid/password without having to reboot/restart the server? Do I need to change these two settings, save then, reboot/restart, and then do the Test Connection button?
Thanks.

I am having trouble connecting to my network all of a sudden. It is not an issue with the service/router. I keep getting kicked off and getting a ! in my airport... anyone know what's up with this?

I am having trouble connecting to my network all of a sudden. I am able to connect to other networks but not my own. It is not an issue with the service/router because other devices connect fine. I keep getting kicked off and getting a ! in my airport. Last time it happended I called apple and the suggested I wipe my HD and reinstall everything. I did and it did not work. One day I turned my laptop on and it connected no problem. Now it has kicked me off again. I tried resetting my IP address but that does not work either! Has anyone had this problem?

Try this:
Apple menu / System Preferences / Network.
Click Location: and select Edit Locations..
Click + (plus sign), and enter a name for the new location - anything will do.
Apply this.

Anyone else having issues with location services since the 7.1 update? Ever since I updated i've been seeing the location services on my status bar at all times.

Anyone else having issues with location services since the 7.1 update? Ever since I updated i’ve been seeing the location services icon on my status bar at all times. I noticed that google was the app that was using it a lot, but after I turned the feature off for google my phone started using the “traffic”, “frequent locations” and “cell network search”. When I turn the feature off for all of those things it’s no longer a problem. So just wondering if anyone else is having this issue or if anyone has a solution?

The "solution" is probably to increase your knowledge. You've done good things. Perhaps this article will educate you a bit more about location services.
Basically, they can be very useful, but can cause a lot of iPhone use. A major example is "Remind me to ... when I leave home."
http://support.apple.com/kb/HT5594

I am having issues with being kicked off the internet intermittently. ATT says its not an issue with their service. Does anyone have an idea?

I am having issues with being kicked off the internet intermittently. ATT states its not an issue with their service. Any ideas?

Yes it is NOT your internet service. It is Apples OSX. It seems to be happening to older computers trying to run the newer OSX ( Mavericks and newer). I have a 2009 iMac I bought with Leopard installed, I upgraded to Snow leopard 10.6.8 and my computer was running flawlessly. I upgraded to Mountain Lion and I noticed my computer running slower... kind of annoying having to wait longer for everything (start up, browsers opening up, apps opening up, mail opening up and so on) Mavericks came out for free and I was excited to get out of this issue. Well, everything went from bad to terrible! Fast user switching had a glitch with desktop picture resetting to the wave, mail rules didn't work properly and I kept getting kicked off the internet (Absolutely NOTHING wrong with my internet). No one could figure out what was going on or how to fix it, even senior Apple tech's! After 3-4 months of searching, troubleshooting and waiting for a fix, I looked at my Mac Pro running Tiger 10.4.11 with no issues what so ever... that is when I made an executive decision. GO BACK TO SNOW LEOPARD! Since May 2014 I have been running 10.6.8 on my 2009 iMac and it has been smoking fast with NO issues what so ever, especially since I maxed out my memory for Mavericks. So to sum it up: some people might get lucky with old machines running new operating systems, but for the most part, it seems older processors can't keep up with the new sophisticated operating systems. Mavericks... Yosemite... FREE UPGRADE! But you will pay the price

Issues with ODATA service creation

Hi Gurus,
I am facing some issues with ODATA service creation. I have an analytic view which I want to consume via SAP UI5.
As per guides and blogs, I need to create 3 files, namely .xsaccess, .xsapp and .xsodata. I created these three files but at the same time .xsodata and .xsaccess got created at one more place. That place is my package which I checked out while creating the repository. Now when I try to activate my .xsaccess or .xsapp file, I get an error message - "The file name .xsaccess or .xsapp already exists and only 1 file is allowed per package"
for more info please revert.
Kindly help.
Best regards,
Chandan

Chandan Sinha wrote:
Can we add multiple analytic views in one ODATA service?
Certainly. You just have multiple entities then. You can even create associations between them. Here is an example that uses a combination of CDS Views, Attribute Views, and Analytic Views:
service namespace "Wile.services" {
"Wile.data.models::AN_EPISODES" as "Episodes"
keys ("EPISODE_ID")
navigates ("ToACMEItems" as "ACMEItems",
            "ToCoyoteNames" as "CoyoteNames",
            "ToRoadRunnerNames" as "RoadRunnerNames",
            "ToDirectors" as "Directors",
            "ToWriters" as "Writers");
"Wile.data.models::AT_ACME_ITEMS" as "ACMEItems"
keys ("EPISODE_ID","ITEM_ID");
"Wile.data.models::AT_ACME_CATALOG" as "ACMECatalog"
keys ("ITEM_ID")
create using "Wile.services:ACMECatalogExits.xsjslib::itemsCreate"
update using "Wile.services:ACMECatalogExits.xsjslib::itemsUpdate"
delete using "Wile.services:ACMECatalogExits.xsjslib::itemsDelete";
"Wile.data::WileECoyote.Episode.CoyoteNamesView" as "CoyoteNames"
with ("EPISODE_ID","NAME_ID","NAME")
keys ("EPISODE_ID","NAME_ID");
"Wile.data::WileECoyote.Episode.RoadRunnerNamesView" as "RoadRunnerNames"
with ("EPISODE_ID","NAME_ID","NAME")
keys ("EPISODE_ID","NAME_ID");
"Wile.data::WileECoyote.Episode.DirectorsView" as "Directors"
with ("EPISODE_ID","NAME_ID","NAME","URL")
keys ("EPISODE_ID","NAME_ID");
"Wile.data::WileECoyote.Episode.WritersView" as "Writers"
with ("EPISODE_ID","NAME_ID","NAME","URL")
keys ("EPISODE_ID","NAME_ID");
association "ToACMEItems" principal "Episodes"("EPISODE_ID")
   multiplicity "1"
   dependent "ACMEItems"("EPISODE_ID") multiplicity "*";
association "ToCoyoteNames" principal "Episodes"("EPISODE_ID")
   multiplicity "1"
   dependent "CoyoteNames"("EPISODE_ID") multiplicity "*";
association "ToRoadRunnerNames" principal "Episodes"("EPISODE_ID")
   multiplicity "1"
   dependent "RoadRunnerNames"("EPISODE_ID") multiplicity "*";
association "ToDirectors" principal "Episodes"("EPISODE_ID")
   multiplicity "1"
   dependent "Directors"("EPISODE_ID") multiplicity "*";
association "ToWriters" principal "Episodes"("EPISODE_ID")
   multiplicity "1"
   dependent "Writers"("EPISODE_ID") multiplicity "*";

"Test Error" - "raise the issue with your service ...

Help!
I have had performance problems on my broadband for quite a while but not been able to progress. The usual number based test from BT says we should get between 4 and 7 mbps. In reality we struggle to get 2 mbps, frequently lanquishing at 1.5 mbps.
I have been onto http://speedtester.bt.com/ to get analysis on the line (previously having had problems with our profile) but whenever I try to run a test (over several weeks) I now always get the reply:
The Performance Tester is currently unable to run a speed test for your broadband connection. Please try again shortly, however if this problem persists, raise the issue with your service provider.
Following up on this with the Indian call centre was an exercise in futility, they just couldn't understand what I was talking about and just wanted to follow the usual script for speed problems. The last time I tried they said they'd found an error at the exchange which they would fix shortly. The result of the "fix" was that our phone and broadband disappeared for 4 days and resolving this came with the usual threat of charging us £99 is the problem wasn't BTs fault. The fault was fixed without any explanation but subsequently I've been reluctant to follow up the problem through this route.
I don't know how to go about getting someone to fix the problem without being able to run the speed tests that BT will accept.
I would greatly appreciate some assistance from this usually very helpful group.
Thanks,
Andrew
Solved!
Go to Solution.

John,
Thank you for answering.
The details from my ASDL statistics are below. I cannot provide a BT Speedtester result - this is one of the problems I was raising. I have done a quiet line test and there is no noise. I don't have an internal master socket; I have an external grey box from which a number of wires run to various sockets.
Thanks,
Andrew
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
1 days, 16:42:25
Downstream:
4.063 Mbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
9.6 dB / 20.0 dB
Line attenuation (Down/Up):
44.0 dB / 25.0 dB
Output power (Down/Up):
20.1 dBm / 12.4 dBm
FEC Events (Down/Up):
4667988 / 202
CRC Events (Down/Up):
4713 / 192
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
86618 / 162
Error Seconds (Local/Remote):
33661 / 5662

Security service error in OBIEE 11G LDAP configuration

Hello
I've recently set up some OBIEE 11G installations and they appear to work ok.
I've more recently been using various guides on the internet to configure OBIEE 11G and Active Directory and can see the users and groups within Weblogic that belong the to the Provider that i've configured.
However, when I attempt to start up OPMN, it always gives me the error like the following:
<Jun 24, 2013 1:45:38 PM NZST> <Warning> <oracle.jps.idmgmt> <BEA-000000> <Requested Object Class (user)not found in cache.
oracle.security.idm.OperationFailureException: Requested Object Class (user)not found in cache.
<Jun 24, 2013 1:52:20 PM NZST> <Error> <oracle.bi.security.service> <OBI-SEC-00004> <Unable to initialize oracle.bi.security.service.SecurityWebService>
I initially had the User Object Class as User in the Provider configuration and noticed it wasn't in the LDAP directory so I tried changing it to a Object Class that did exist for one of the users but it made no difference. It still says the same error message even though I have no reference to User in the configuration.
Can anyone suggest something I might be doing wrong or missing?

I have followed the same configuration. However i am getting the following error when i try to login
Caused by: oracle.bi.security.service.SecurityServiceException: SecurityService::authenticateUserWithLanguage - '<LDAP user>' was authenticated but could not located within the Identity Store.
I guess some configuration issue, but cannot be able to spot the error. Please let me know your idea
Thanks

Problem with dashboard prompt initial value (OBIEE 11g)

Hi alli,
I have a problem with dashboard prompt and session variable in OBIEE 11g.
I have declared a session non-system variable which I set/change with dashboard prompt. At login the variable is initialized in initialization block that gets a value from an SQL select statement.
When I change the value in prompt, the session variable changes accordingly, as it should (change is made by calling function NQSSetSessionValue() within javascript function). While I am in my dashboard, cruising around pages the variable stays the same, and when I return to the page that has prompt on it, the correct value is shown. Everything works fine.
The problem occures when I go to Catalog (in presentation services) to create some new Answers. When I return back to the same page in dashboard (which has a prompt), the prompt selected value and session variable are set back to the default value. It looks like the initialization block is executed again.
My prompt is configured like this:
- Choice List Values: SQL Results
- Default selection: Variable Expression (@{biServer.variables['NQ_SESSION.VariableName']} )
- Set a variable: Presentation Variable
Is there a way to stop the initialization block from executing again? Isn't it logical that the initialization block executes only at login, when the session variable is empty? I don't need it to execute every time i come to the dashboard.
Thanks in advance,
Marko
Edited by: markor on 14.3.2011 8:58

How and where do you use the nqssetvalue() function.
I tried it in several places but it doesn't work.
Can you help me, please!
Thanks

EclipseLink persistence provider issue with weblogic 10.3

Hi All,
I have been trying to deploy and run an EAR in weblogic but when I run the application I get the following warning: WARNING: Found unrecognized persistence provider "org.eclipse.persistence.jpa.PersistenceProvider" in place of OpenJPA provider. This provider's properties will not be used.
The following is my persistence.xml:
<persistence xmlns="http://java.sun.com/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/persistence persistence_1_0.xsd" version="1.0">
<persistence-unit name="default" transaction-type="JTA">
<provider>org.eclipse.persistence.jpa.PersistenceProvider</provider>
<jta-data-source>DataSourceName</jta-data-source>
<class>oracle.communications.platform.entity.impl.CharacteristicSpecificationDAO</class>
<properties>
<property name="eclipselink.logging.level" value="FINEST" />
<property name="eclipselink.target-database" value="org.eclipse.persistence.platform.database.oracle.OraclePlatform" />
<property name="eclipselink.target-server" value="WebLogic_10" />
<property name="eclipselink.session-event-listener" value="oracle.communications.platform.persistence.impl.PomsSessionEventListener" />
<property name="eclipselink.session.customizer" value="oracle.communications.platform.util.EclipseLinkSessionCustomizer" />
<property name="poms.cache.coordination.implementation" value="jms" />
<property name="poms.cache.coordination.ipaddress" value="10.178.139.64" />
<property name="poms.cache.coordination.port" value="7101" />
<property name="poms.cache.coordination.multicast.group.address" value="226.10.12.64" />
<property name="poms.cache.coordination.multicast.port" value="3121" />
<property name="poms.cache.coordination.topic.connection.factory.name" value="EclipseLinkTopicConnectionFactory" />
<property name="poms.cache.coordination.topic.name" value="EclipseLinkTopic" />
<property name="poms.cache.coordination.username" value="weblogic" />
<property name="poms.cache.coordination.password" value="weblogic" />
<property name="poms.cache.coordination.password.encrypted" value="false" />
</properties>
</persistence-unit>
</persistence>
I have written a session customizer that reads properties from the persistence.xml and initializes stuff. But because of the warning i mentioned earlier... I am getting null for all property entries.
I moved the eclipselink jar entry up ahead of openjpa jar entry in weblogic.server.modules_10.3.1.0.xml and refcount.xml in /modules/features directory. I am still getting the same problem.
I read in many posts for workarounds for this issue but didnt find anything which worked for me. I would be grateful if someone could provide me a hint as to how to make it work.
Thanks in advance,
Prashanth.

Prashanth,
Hi, there should be no issue running EclipseLink on WebLogic while you see this warning. If you are getting null properties it may be the result of another issue, could you post specific exceptions and the part of your client code that is having a problem.
1) The warning below normally appears only when running your persistence unit with an "application managed" JTA datasource as opposed to a "globally defined server scoped datasource". Even then it can be ignored as there are still parts of WebLogic that depend on OpenJPA. Even though the warning states that properties are ignored - they are not and you should see your persistence unit loaded properly.
I encountered this issue when running an "application managed" JTA - here is an extract of the log showing the warning and the full functioning of the pu later - the persistence unit and example code can be found on the weblogic tutorial examples link below
"[EL Finer]: 2008.10.29 13:03:55.565--ClientSession(30346337)--Thread(Thread[[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads])--client released
WARNING: Found unrecognized persistence provider "org.eclipse.persistence.jpa.PersistenceProvider" in place of OpenJPA provider. This provider's properties will not be used.
[EL Info]: 2008.10.29 13:03:56.079--ServerSession(14772987)--EclipseLink, version: Eclipse Persistence Services - 1.1.0 (Build 20081023)
[EL Info]: 2008.10.29 13:03:56.391--ServerSession(14772987)--file:/C:/view_w34r1a/examples/org.eclipse.persistence.example.jpa.server.weblogic.enterpriseEJB/build/classes/-exampleLocal login successful
15 Entities in storage: 15
[EL ExampleLocal EM]: enterprise: Object: [email protected]( id: 6 state: null parent: HashSet@15794734 references: HashSet@15794734)
[EL ExampleLocal EM]: enterprise: Object: [email protected]( id: 26 state: null parent: HashSet@8800655 references: HashSet@8800655)
I raised the following minor issue with our WebLogic Server team in Oct for reference - however this warning did not affect proper functioning of EclipseLink JPA.
https://bug.oraclecorp.com/pls/bug/webbug_edit.edit_info_top?rptno=7520161
You may reference the following tutorial on running EclipseLink JPA on WebLogic 10.3, it details all the steps necessary to get a JTA container managed persistence unit running via a stateless session bean and a servlet client. It also details and links to application managed datasource configuration details.
http://wiki.eclipse.org/EclipseLink/Examples/JPA/WebLogic_Web_Tutorial
2) eclipselink.jar location in WebLogic?
The eclipselink.jar library should stay in the modules or patch_* directory depending on whether you are running a standalone WebLogic server or as part of a Fusion Middleware JDeveloper environment.
See the following link that details deployment options for WebLogic and EclipseLink
http://wiki.eclipse.org/EclipseLink/Examples/JPA/WebLogic_Web_Tutorial#EclipseLink_JAR_location
Note: I have not modified the load order of EclipseLink, OpenJPA or Kodo, I am running all including this version of OpenJPA in my modules directory. [org.apache.openjpa_1.0.0.0_1-1-1-SNAPSHOT.jar]
3) I noticed that you are defining the target-database property in your persistence unti but you are running as JTA not RESOURCE_LOCAL. This property can be removed if your JTA datasource is defined as a Transactional server scoped datasource via the WebLogic console.
thank you
/michael
http://www.eclipselink.org

Issue with Planning service getting crashed Automatically due to dll file

Hello,
I am having an issue with the Hyperion Planning service which is getting crashed and the following is noted in the Eventviewer:
Faulting application name: HyS9Planning.exe, version: 1.0.0.2, time stamp: 0x4d110efc
Faulting module name: jrosal.dll, version: 0.0.0.0, time stamp: 0x4e8c8104
Exception code: 0x40000015
Fault offset: 0x000000000000cb0b
Faulting process id: 0x1960
Faulting application start time: 0x01ce14f7a8434b04
Faulting application path: D:\Oracle\Middleware\user_projects\domains\EPMSystem\bin\HyS9Planning.exe
Faulting module path: D:\Oracle\Middleware\jrockit_160_29\jre\bin\jrosal.dll
Report Id: 967733e6-8152-11e2-9257-5cf3fc335086The following is recorded in the log file:
<Mar 2, 2013 2:45:22 PM CST>
<Error> <HTTP> <BEA-101017> <[ServletContext@271625046[app:PLANNING module:HyperionPlanning path:/HyperionPlanning spec-version:2.5 version:11.1.2.0]]
Root cause of ServletException.
java.lang.OutOfMemoryError: classblock allocation, 11312928 loaded, 11M footprint, in check_alloc (src/jvm/model/classload/classalloc.c:215).
Attempting to allocate 2G bytes
There is insufficient native memory for the Java
Runtime Environment to continue.
Possible reasons:
The system is out of physical RAM or swap space
In 32 bit mode, the process size limit was hit
Possible solutions:
Reduce memory load on the system
Increase physical memory or swap space
Check if swap backing store is full
Use 64 bit Java on a 64 bit OS
Decrease Java heap size (-Xmx/-Xms)
Decrease number of Java threads
Decrease Java thread stack sizes (-Xss)
Disable compressed references (-XXcompressedRefs=false)
     at java.lang.ClassLoader.defineClass1(Native Method)
     at java.lang.ClassLoader.defineClassCond(ClassLoader.java:631)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:615)
     at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141)
     at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:343)
     Truncated. see log file for complete stacktraceI checked the following forum
Re: Oracle JRockit R28.2.2. OutOfMemoryError: classblock allocation
Should I need to increase -XX:MaxClassBlockMemory to 75M. If so, how should I do it, I am unaware of how I can set the values? My Planning server has 136GB Ram and 18 Cores.
Thanks,
hyperionEPM

The issue was related to the heap size being too much and as a result the Class block memory was not getting enough memory. I think we can make a use of -XXCompressedRefs:32 parameter in the Java start up to allow the heap size to increase till 32 Gb.

Performance Issues with Location Services

I am having performance lag issues with most apps with location services turned on. This is a new issue that has crept up after update to iOS 4.2.1. Apps get slow and upon exiting the location service is still active as indicated by arrow icon in top right of screen. Any recommendation short of killing all location services? Note this even occurs in apple apps such as photos.

Have you tried basics from the manual?
restart.
reset.
restore.

Deliver data to external web service possible in OBIEE 11g?

Hi all,
I'm looking into the possibility of "pushing" data from OBIEE and out to an external web service, e.g. through executing a scheduled report that instead of delivering the result on screen, it would call an external web service that would consume the generated data for storage in an external system.
Does anyone know if this is possible to implement in OBIEE 11g? (So far, all I've found is how to display data in OBIEE through consumation of web service(s), but I'd like to "push out" data to a web service from OBIEE).
Regards,
-Haakon-

Action Links 11g - Invoke webservice you can try out..... I never tried... Just sharing my views.
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi1113/actionframework/actionframework.htm

Issue with Weblogic services in Linux OBIEE 11G

Similar Messages

Maybe you are looking for