Issue with WIFI after LOLLIPOP upgrade Z3C

Z3C, upgraded to Lollipop and WiFi became slow, speed went down from 80 mbps to 3 mbps !!! 
Phone seems sluggish in general, KitKat was fantastic, now I have a slow phone.
Bluetooth transfer also went from 160 kb to 90 kb....
Does anyone know how it can be fixed? what about the 5ghz band for the WiFi on the phone?

Yes, same WiFi problem with safe mode. Everything was perfect until the upgrade to Lollipop. Now WiFi speed is 1/10 of before, and phone is slow in general. realy sad, sometimes even whatsapp messages takes minutes to be delivered.
Does anyone know how to select only 5ghz channel for the WiFi on the phone?

Similar Messages

  • Problems with wifi after lion upgrade 10.7.2 but only at home

    HI, my wifi conection was problemless till I upgraded to lion 10.7.2. After that, it is impossible to connect through airport but only in my home´s wifi. Other computers work at home (including my iphone) and my macbook pro connects everywhere else with no problem but it doesn´t at home. Inmediately after choosing the desired conection it says: Not posible to conect due to conection time run out (or something like that).
    Any help?

    Then it would appear to be an issue with your router. What router? Model? Is the firmware up to date?

  • Issue with SUIM after EHP5 Upgrade

    Dear All,
    We have recently upgraded our SAP System to EHP5, everything seems to be normal though.
    1. When we do a search in SUIM under "Roles by Complex Selection Criteria" --> Transaction Code --> KSB9 and hit Execute we are popped up with about 1000+ Roles, however none of the roles list are assigned with this transaction.
    2. When we do a similar search in SUIM under "Roles by Complex Selection Criteria" --> Authorization Object S_TCODE and set the value to KSB9 this work and provides with with a list of roles which has access to the Transaction code KSB9.
    We tested the same in other system which is not yet upgraded to EHP5, we see that the system gives the correct list of roles by doing in the above mentioned two ways.
    I have search in the market place to find a bug fix however no solution found.
    Please advice for a fix.
    Regards

    Hi Sumanth,
    Refer and implement the applicable SAP Notes, which are published to resolve issues with SUIM report inconsistencies:
    Note 1575598 - SUIM RSUSR070 incorr. results when searching for transaction
    Note 1527861 - SUIM: Incorrect results when searching for auth. objects
    Note 1393940 - SUIM| Incorrect results when searching for profile and roles
    Regards,
    Raghu

  • Issue with bootadm after mobo upgrade

    Hi,
    the motherboard of one of our servers died and I decided to take this opportunity to upgrade the server. With the new mobo though, the order of the disks is different. I managed to get the system to boot by recreating the device tree, but I am still having some issues with bootadm.
    When I run bootadm list-menu, I get error messages saying that it can't find the menu.lst, which is normal as it looks like it is still searching for the menu.lst at the old location, i.e. /dev/dsk/c0d0s0, when the new location is /dev/dsk/c2d0s0. The weird thing though is that if I run bootadm list-archive, I get no error messages. Any idea what I can do to fix this? I have tried to run bootadm update-archive -f -R, as well as installgrub -m /boot/grub/stage1 /boot/grub/stage2 /dev/rdsk/c2d0s0, but nothing seems to fix it.
    I am running Solaris 5.11 snv_60.
    Thanks a lot in advance,
    Bertrand.

    Hi,
    the motherboard of one of our servers died and I decided to take this opportunity to upgrade the server. With the new mobo though, the order of the disks is different. I managed to get the system to boot by recreating the device tree, but I am still having some issues with bootadm.
    When I run bootadm list-menu, I get error messages saying that it can't find the menu.lst, which is normal as it looks like it is still searching for the menu.lst at the old location, i.e. /dev/dsk/c0d0s0, when the new location is /dev/dsk/c2d0s0. The weird thing though is that if I run bootadm list-archive, I get no error messages. Any idea what I can do to fix this? I have tried to run bootadm update-archive -f -R, as well as installgrub -m /boot/grub/stage1 /boot/grub/stage2 /dev/rdsk/c2d0s0, but nothing seems to fix it.
    I am running Solaris 5.11 snv_60.
    Thanks a lot in advance,
    Bertrand.

  • Performance issue with form after 10g upgrade

    Hi Team,
    Last week we have upgraded our systems to 10g database.
    Ever since we did an upgrade there is a huge performance issues with the custom forms and this is causing a major setback to our business. Before the upgrade the forms were running with our any performance issues.
    Can anyone please help me in finding out the reason behind the performance issue(May be a tar or performance tuning).
    Many Thanks in Advance.
    Regards
    Kumar

    Like Jan said,
    You must supply more information so we can help you, like where the degradation happens?, in processing? in navigation? in forms loading?? where?
    You may also do a little test. Create a one button form, just a canvas and a button, you can include a message in when-button-pressed trigger.
    run it and see what happens.
    Tony

  • Having issues with WiFi after upgrading to iOS 7.

    After upgrading my iPhone 5 to iOS 7 I'm having WiFi issues that I didn't have with iOS 6.  For example, on my home network YouTube videos hang multiple times in a 1 minute video, Facebook pages with heavy duty graphics take forever or don't load, and running Ookla speed test, all the test are slower.  On every other computers in the house, download is faster than upload, except on the iPhone 5 with iOS 7.  Anyone else seen this?

    Do the basics first. follow http://support.apple.com/kb/TS1398. I would also clear cookies and data in settings > safari.

  • Issue with fglrx after kernel upgrade

    Hello, I lost my 2D acceleration on both my monitors after the most recent kernel upgrade(2.6.26.2). I'm using the fglrx driver.
    [roberth@Magda ~]$ cat /var/log/Xorg.0.log | grep EE
    Current Operating System: Linux Magda 2.6.26-ARCH #1 SMP PREEMPT Sun Aug 10 12:29:20 UTC 2008 i686
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (II) Loading extension MIT-SCREEN-SAVER
    (EE) Failed to load module "type1" (module does not exist, 0)
    (EE) fglrx(0): Failed to allocate primary surface (frame buffer)!
    (EE) fglrx(0): XMM failed to open CMMQS connection.
    (EE) fglrx(1): DRI initialization for 2nd screen failed - aborting!
    (EE) fglrx(1): XMM failed to open CMMQS connection.
    Section "ServerLayout"
    Identifier "Xorg Configured"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    Screen "aticonfig-Screen[0]-1" LeftOf "aticonfig-Screen[0]-0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "USB Mouse" "CorePointer"
    EndSection
    Section "Files"
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc:unscaled"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi"
    FontPath "/usr/share/fonts/PEX"
    FontPath "/usr/share/fonts/cyrillic"
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/ttf/western"
    FontPath "/usr/share/fonts/ttf/decoratives"
    FontPath "/usr/share/fonts/truetype"
    FontPath "/usr/share/fonts/truetype/openoffice"
    FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath "/usr/share/fonts/latex-ttf-fonts"
    FontPath "/usr/share/fonts/defoma/CID"
    FontPath "/usr/share/fonts/defoma/TrueType"
    EndSection
    Section "Module"
    Load "dbe"
    Load "dri"
    Load "extmod"
    Load "glx"
    Load "type1"
    Load "freetype"
    Load "record"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "keyboard"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "no"
    EndSection
    Section "InputDevice"
    Identifier "USB Mouse"
    Driver "mouse"
    Option "Device" "/dev/input/mice"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-1"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "fglrx"
    Option "Capabilities" "0x00000800"
    BusID "PCI:5:0:0"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-1"
    Driver "fglrx"
    BusID "PCI:5:0:0"
    Screen 1
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    Monitor "aticonfig-Monitor[0]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-1"
    Device "aticonfig-Device[0]-1"
    Monitor "aticonfig-Monitor[0]-1"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    EndSection

    X.Org X Server 1.4.2
    Release Date: 11 June 2008
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.25-ARCH i686
    Current Operating System: Linux lappy486 2.6.26-ARCH #1 SMP PREEMPT Sun Aug 10 12:29:20 UTC 2008 i686
    Build Date: 21 June 2008 05:47:59PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug 10 21:14:43 2008
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Xorg Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "Synaptics Touchpad"
    (**) |-->Input Device "USB Mouse"
    (**) Option "AllowMouseOpenFail" "true"
    (**) Option "AIGLX" "on"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/PEX" does not exist.
    Entry deleted from font path.
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
    (WW) The directory "/usr/share/fonts/ttf/western" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
    Entry deleted from font path.
    (==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
    (**) FontPath set to:
    /usr/share/fonts/misc:unscaled,
    /usr/share/fonts/misc,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/75dpi,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/100dpi,
    /usr/share/fonts/Type1,
    /usr/share/fonts/artwiz-fonts/,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (**) RgbPath set to "/usr/share/X11/rgb"
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (**) Extension "XVideo" is enabled
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) Loader magic: 0x81e0a60
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 2.0
    X.Org XInput driver : 2.0
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
    (II) Loader running on linux
    (II) LoadModule: "pcidata"
    (II) Loading /usr/lib/xorg/modules//libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    ABI class: X.Org Video Driver, version 2.0
    (--) using VT number 7
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 1002,5a31 card 1179,ff10 rev 01 class 06,00,00 hdr 00
    (II) PCI: 00:01:0: chip 1002,5a3f card 0000,0000 rev 00 class 06,04,00 hdr 01
    (II) PCI: 00:04:0: chip 1002,5a36 card 0000,0000 rev 00 class 06,04,00 hdr 01
    (II) PCI: 00:12:0: chip 1002,4379 card 1179,ff10 rev 80 class 01,01,8f hdr 00
    (II) PCI: 00:13:0: chip 1002,4374 card 1179,ff10 rev 80 class 0c,03,10 hdr 80
    (II) PCI: 00:13:1: chip 1002,4375 card 1179,ff10 rev 80 class 0c,03,10 hdr 00
    (II) PCI: 00:13:2: chip 1002,4373 card 1179,ff10 rev 80 class 0c,03,20 hdr 00
    (II) PCI: 00:14:0: chip 1002,4372 card 1179,ff10 rev 82 class 0c,05,00 hdr 80
    (II) PCI: 00:14:1: chip 1002,4376 card 1179,ff10 rev 80 class 01,01,8a hdr 00
    (II) PCI: 00:14:2: chip 1002,437b card 1179,ff10 rev 01 class 04,03,00 hdr 00
    (II) PCI: 00:14:3: chip 1002,4377 card 1002,4377 rev 80 class 06,01,00 hdr 80
    (II) PCI: 00:14:4: chip 1002,4371 card 0000,0000 rev 80 class 06,04,01 hdr 81
    (II) PCI: 01:05:0: chip 1002,5a62 card 1179,ff10 rev 00 class 03,00,00 hdr 00
    (II) PCI: 02:00:0: chip 168c,001c card 144f,7106 rev 01 class 02,00,00 hdr 00
    (II) PCI: 05:06:0: chip 1524,1410 card a800,0000 rev 01 class 06,07,00 hdr 02
    (II) PCI: 05:07:0: chip 10ec,8139 card 1179,ff10 rev 10 class 02,00,00 hdr 00
    (II) PCI: 05:0a:0: chip 1106,3044 card 1179,ff10 rev c0 class 0c,00,10 hdr 00
    (II) PCI: End of PCI scan
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,6), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
    (II) Bus 1 I/O range:
    [0] -1 0 0x00009000 - 0x000090ff (0x100) IX[b]
    [1] -1 0 0x00009400 - 0x000094ff (0x100) IX[b]
    [2] -1 0 0x00009800 - 0x000098ff (0x100) IX[b]
    [3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b]
    (II) Bus 1 non-prefetchable memory range:
    [0] -1 0 0xc0000000 - 0xc00fffff (0x100000) MX[b]
    (II) Bus 1 prefetchable memory range:
    [0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 2: bridge is at (0:4:0), (0,2,4), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) Bus 2 non-prefetchable memory range:
    [0] -1 0 0xc0100000 - 0xc01fffff (0x100000) MX[b]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:20:3), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (II) Subtractive PCI-to-PCI bridge:
    (II) Bus 5: bridge is at (0:20:4), (0,5,7), BCTRL: 0x0002 (VGA_EN is cleared)
    (II) Bus 5 I/O range:
    [0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[b]
    (II) Bus 5 non-prefetchable memory range:
    [0] -1 0 0xc0200000 - 0xc02fffff (0x100000) MX[b]
    (II) PCI-to-CardBus bridge:
    (II) Bus 6: bridge is at (5:6:0), (5,6,6), BCTRL: 0x05c0 (VGA_EN is cleared)
    (II) Bus 6 I/O range:
    [0] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
    [1] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[b]
    (--) PCI:*(1:5:0) ATI Technologies Inc RC410 [Radeon Xpress 200M] rev 0, Mem @ 0xd0000000/28, 0xc0000000/16, I/O @ 0x9000/8
    (II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) OS-reported resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) Active PCI resource ranges:
    [0] -1 0 0xc0200000 - 0xc02007ff (0x800) MX[b]
    [1] -1 0 0xc0200800 - 0xc02008ff (0x100) MX[b]
    [2] -1 0 0xc0100000 - 0xc010ffff (0x10000) MX[b]
    [3] -1 0 0xc0500000 - 0xc0503fff (0x4000) MX[b]
    [4] -1 0 0xc0507400 - 0xc05077ff (0x400) MX[b]
    [5] -1 0 0xc0506000 - 0xc0506fff (0x1000) MX[b]
    [6] -1 0 0xc0505000 - 0xc0505fff (0x1000) MX[b]
    [7] -1 0 0xc0504000 - 0xc0504fff (0x1000) MX[b]
    [8] -1 0 0xc0507000 - 0xc05071ff (0x200) MX[b]
    [9] -1 0 0xc0000000 - 0xc000ffff (0x10000) MX[b](B)
    [10] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [11] -1 0 0x0000a400 - 0x0000a47f (0x80) IX[b]
    [12] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
    [13] -1 0 0x00008460 - 0x0000846f (0x10) IX[b]
    [14] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
    [15] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
    [16] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
    [17] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [18] -1 0 0x00008450 - 0x0000845f (0x10) IX[b]
    [19] -1 0 0x00008400 - 0x0000840f (0x10) IX[b]
    [20] -1 0 0x00008410 - 0x00008413 (0x4) IX[b]
    [21] -1 0 0x00008420 - 0x00008427 (0x8) IX[b]
    [22] -1 0 0x00008430 - 0x00008433 (0x4) IX[b]
    [23] -1 0 0x00008440 - 0x00008447 (0x8) IX[b]
    [24] -1 0 0x00009000 - 0x000090ff (0x100) IX[b](B)
    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0xc0200000 - 0xc02007ff (0x800) MX[b]
    [1] -1 0 0xc0200800 - 0xc02008ff (0x100) MX[b]
    [2] -1 0 0xc0100000 - 0xc010ffff (0x10000) MX[b]
    [3] -1 0 0xc0500000 - 0xc0503fff (0x4000) MX[b]
    [4] -1 0 0xc0507400 - 0xc05077ff (0x400) MX[b]
    [5] -1 0 0xc0506000 - 0xc0506fff (0x1000) MX[b]
    [6] -1 0 0xc0505000 - 0xc0505fff (0x1000) MX[b]
    [7] -1 0 0xc0504000 - 0xc0504fff (0x1000) MX[b]
    [8] -1 0 0xc0507000 - 0xc05071ff (0x200) MX[b]
    [9] -1 0 0xc0000000 - 0xc000ffff (0x10000) MX[b](B)
    [10] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [11] -1 0 0x0000a400 - 0x0000a47f (0x80) IX[b]
    [12] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
    [13] -1 0 0x00008460 - 0x0000846f (0x10) IX[b]
    [14] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
    [15] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
    [16] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
    [17] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [18] -1 0 0x00008450 - 0x0000845f (0x10) IX[b]
    [19] -1 0 0x00008400 - 0x0000840f (0x10) IX[b]
    [20] -1 0 0x00008410 - 0x00008413 (0x4) IX[b]
    [21] -1 0 0x00008420 - 0x00008427 (0x8) IX[b]
    [22] -1 0 0x00008430 - 0x00008433 (0x4) IX[b]
    [23] -1 0 0x00008440 - 0x00008447 (0x8) IX[b]
    [24] -1 0 0x00009000 - 0x000090ff (0x100) IX[b](B)
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) All system resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xc0200000 - 0xc02007ff (0x800) MX[b]
    [5] -1 0 0xc0200800 - 0xc02008ff (0x100) MX[b]
    [6] -1 0 0xc0100000 - 0xc010ffff (0x10000) MX[b]
    [7] -1 0 0xc0500000 - 0xc0503fff (0x4000) MX[b]
    [8] -1 0 0xc0507400 - 0xc05077ff (0x400) MX[b]
    [9] -1 0 0xc0506000 - 0xc0506fff (0x1000) MX[b]
    [10] -1 0 0xc0505000 - 0xc0505fff (0x1000) MX[b]
    [11] -1 0 0xc0504000 - 0xc0504fff (0x1000) MX[b]
    [12] -1 0 0xc0507000 - 0xc05071ff (0x200) MX[b]
    [13] -1 0 0xc0000000 - 0xc000ffff (0x10000) MX[b](B)
    [14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [17] -1 0 0x0000a400 - 0x0000a47f (0x80) IX[b]
    [18] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
    [19] -1 0 0x00008460 - 0x0000846f (0x10) IX[b]
    [20] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
    [21] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
    [22] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
    [23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [24] -1 0 0x00008450 - 0x0000845f (0x10) IX[b]
    [25] -1 0 0x00008400 - 0x0000840f (0x10) IX[b]
    [26] -1 0 0x00008410 - 0x00008413 (0x4) IX[b]
    [27] -1 0 0x00008420 - 0x00008427 (0x8) IX[b]
    [28] -1 0 0x00008430 - 0x00008433 (0x4) IX[b]
    [29] -1 0 0x00008440 - 0x00008447 (0x8) IX[b]
    [30] -1 0 0x00009000 - 0x000090ff (0x100) IX[b](B)
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (**) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.4.2, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font FreeType
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension RECORD
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 4.3.99.902, module version = 1.0.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) LoadModule: "fglrx"
    (II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
    (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    compiled for 7.1.0, module version = 8.51.3
    Module class: X.Org Video Driver
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.3.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) LoadModule: "synaptics"
    (II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.3.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) Primary Device is: PCI 01:05:0
    (II) ATI Proprietary Linux Driver Version Identifier:8.51.3
    (II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.512
    (II) ATI Proprietary Linux Driver Build Date: Jul 3 2008 22:50:40
    (--) Chipset Supported AMD Graphics Processor (0x5A62) found
    (II) AMD Video driver is running on a device belonging to a group targeted for this release
    (II) AMD Video driver is signed
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xc0200000 - 0xc02007ff (0x800) MX[b]
    [5] -1 0 0xc0200800 - 0xc02008ff (0x100) MX[b]
    [6] -1 0 0xc0100000 - 0xc010ffff (0x10000) MX[b]
    [7] -1 0 0xc0500000 - 0xc0503fff (0x4000) MX[b]
    [8] -1 0 0xc0507400 - 0xc05077ff (0x400) MX[b]
    [9] -1 0 0xc0506000 - 0xc0506fff (0x1000) MX[b]
    [10] -1 0 0xc0505000 - 0xc0505fff (0x1000) MX[b]
    [11] -1 0 0xc0504000 - 0xc0504fff (0x1000) MX[b]
    [12] -1 0 0xc0507000 - 0xc05071ff (0x200) MX[b]
    [13] -1 0 0xc0000000 - 0xc000ffff (0x10000) MX[b](B)
    [14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [17] -1 0 0x0000a400 - 0x0000a47f (0x80) IX[b]
    [18] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
    [19] -1 0 0x00008460 - 0x0000846f (0x10) IX[b]
    [20] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
    [21] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
    [22] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
    [23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [24] -1 0 0x00008450 - 0x0000845f (0x10) IX[b]
    [25] -1 0 0x00008400 - 0x0000840f (0x10) IX[b]
    [26] -1 0 0x00008410 - 0x00008413 (0x4) IX[b]
    [27] -1 0 0x00008420 - 0x00008427 (0x8) IX[b]
    [28] -1 0 0x00008430 - 0x00008433 (0x4) IX[b]
    [29] -1 0 0x00008440 - 0x00008447 (0x8) IX[b]
    [30] -1 0 0x00009000 - 0x000090ff (0x100) IX[b](B)
    (II) fglrx(0): pEnt->device->identifier=0x831d708
    (II) resource ranges after probing:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xc0200000 - 0xc02007ff (0x800) MX[b]
    [5] -1 0 0xc0200800 - 0xc02008ff (0x100) MX[b]
    [6] -1 0 0xc0100000 - 0xc010ffff (0x10000) MX[b]
    [7] -1 0 0xc0500000 - 0xc0503fff (0x4000) MX[b]
    [8] -1 0 0xc0507400 - 0xc05077ff (0x400) MX[b]
    [9] -1 0 0xc0506000 - 0xc0506fff (0x1000) MX[b]
    [10] -1 0 0xc0505000 - 0xc0505fff (0x1000) MX[b]
    [11] -1 0 0xc0504000 - 0xc0504fff (0x1000) MX[b]
    [12] -1 0 0xc0507000 - 0xc05071ff (0x200) MX[b]
    [13] -1 0 0xc0000000 - 0xc000ffff (0x10000) MX[b](B)
    [14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [20] -1 0 0x0000a400 - 0x0000a47f (0x80) IX[b]
    [21] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
    [22] -1 0 0x00008460 - 0x0000846f (0x10) IX[b]
    [23] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
    [24] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
    [25] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
    [26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [27] -1 0 0x00008450 - 0x0000845f (0x10) IX[b]
    [28] -1 0 0x00008400 - 0x0000840f (0x10) IX[b]
    [29] -1 0 0x00008410 - 0x00008413 (0x4) IX[b]
    [30] -1 0 0x00008420 - 0x00008427 (0x8) IX[b]
    [31] -1 0 0x00008430 - 0x00008433 (0x4) IX[b]
    [32] -1 0 0x00008440 - 0x00008447 (0x8) IX[b]
    [33] -1 0 0x00009000 - 0x000090ff (0x100) IX[b](B)
    [34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [35] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) fglrx(0): === [atiddxPreInit] === begin
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 0.1.0
    ABI class: X.Org Video Driver, version 2.0
    (II) fglrx(0): PCI bus 1 card 5 func 0
    (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) fglrx(0): Default visual is TrueColor
    (**) fglrx(0): Option "OpenGLOverlay" "off"
    (**) fglrx(0): Option "VideoOverlay" "on"
    (**) fglrx(0): Option "UseFastTLS" "2"
    (**) fglrx(0): Option "DPMS" "true"
    (II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
    (==) fglrx(0): RGB weight 888
    (II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
    (==) fglrx(0): Gamma Correction for I is 0x06419064
    (==) fglrx(0): Gamma Correction for II is 0x06419064
    (==) fglrx(0): Buffer Tiling is ON
    (--) fglrx(0): Chipset: "ATI Radeon Xpress Series" (Chipset = 0x5a62)
    (--) fglrx(0): (PciSubVendor = 0x1179, PciSubDevice = 0xff10)
    (--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
    (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
    (--) fglrx(0): MMIO registers at 0xc0000000
    (--) fglrx(0): I/O port at 0x00009000
    (==) fglrx(0): ROM-BIOS at 0x000c0000
    (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.1.0
    ABI class: X.Org Video Driver, version 2.0
    (II) fglrx(0): VESA BIOS detected
    (II) fglrx(0): VESA VBE Version 2.0
    (II) fglrx(0): VESA VBE Total Mem: 131072 kB
    (II) fglrx(0): VESA VBE OEM: ATI RADEON XPRESS 200M Series
    (II) fglrx(0): VESA VBE OEM Software Rev: 1.0
    (II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
    (II) fglrx(0): VESA VBE OEM Product: MS4
    (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: Searching for BusID PCI:1:5:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: drmOpenMinor returns 8
    drmOpenByBusid: drmGetBusid reports PCI:1:5:0
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
    (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    compiled for 7.1.0, module version = 8.51.3
    ABI class: X.Org Server Extension, version 0.3
    (II) fglrx(0): Using adapter: 1:5.0.
    (II) fglrx(0): [FB] Find the MC FB aperturs range(MCFBBase = 0x38000000, MCFBSize = 0x8000000)
    (--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
    (II) fglrx(0): PCIE card detected
    (WW) fglrx(0): board is an unknown third party board, chipset is supported
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"(II) Module "ddc" already built-in
    (II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]
    (II) fglrx(0): Display1 EDID data ---------------------------
    (II) fglrx(0): Manufacturer: LPL Model: c800 Serial#: 0
    (II) fglrx(0): Year: 2006 Week: 0
    (II) fglrx(0): EDID Version: 1.3
    (II) fglrx(0): Digital Display Input
    (II) fglrx(0): Max H-Image Size [cm]: horiz.: 33 vert.: 21
    (II) fglrx(0): Gamma: 2.20
    (II) fglrx(0): No DPMS capabilities specified; RGB/Color Display
    (II) fglrx(0): First detailed timing is preferred mode
    (II) fglrx(0): redX: 0.600 redY: 0.351 greenX: 0.324 greenY: 0.554
    (II) fglrx(0): blueX: 0.153 blueY: 0.140 whiteX: 0.312 whiteY: 0.328
    (II) fglrx(0): Manufacturer's mask: 0
    (II) fglrx(0): Supported additional Video Mode:
    (II) fglrx(0): clock: 73.5 MHz Image Size: 331 x 207 mm
    (II) fglrx(0): h_active: 1280 h_sync: 1312 h_sync_end 1352 h_blank_end 1464 h_border: 0
    (II) fglrx(0): v_active: 800 v_sync: 804 v_sync_end 808 v_blanking: 837 v_border: 0
    (II) fglrx(0): LGPhilipsLCD
    (II) fglrx(0): LP154W01-TLE4
    (II) fglrx(0): EDID (in hex):
    (II) fglrx(0): 00ffffffffffff00320c00c800000000
    (II) fglrx(0): 00100103802115780ab3709959538d27
    (II) fglrx(0): 23505400000001010101010101010101
    (II) fglrx(0): 010101010101b61c00b8502025302028
    (II) fglrx(0): 44004bcf100000190000000000000000
    (II) fglrx(0): 00000000000000000000000000fe004c
    (II) fglrx(0): 475068696c6970734c43440a000000fe
    (II) fglrx(0): 004c503135345730312d544c4534002a
    (II) fglrx(0): End of Display1 EDID data --------------------
    (II) fglrx(0): Primary Controller - LCD on internal LVDS
    (II) fglrx(0): Internal Desktop Setting: 0x00000004
    (II) fglrx(0): POWERplay version 3. 1 power state available:
    (II) fglrx(0): 1. 301/266MHz @ 60Hz [enable load balancing]
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 2
    (==) fglrx(0): Qbs is not supported in this release. Disabled.
    (==) fglrx(0): FAST_SWAP disabled
    (==) fglrx(0): PseudoColor visuals disabled
    (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) fglrx(0): Center Mode is disabled
    (==) fglrx(0): TMDS coherent mode is enabled
    (II) fglrx(0): Total of 13 modes found for primary display.
    (--) fglrx(0): Virtual size is 1280x800 (pitch 0)
    (**) fglrx(0): *Mode "1280x800": 73.5 MHz (scaled from 0.0 MHz), 50.2 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1280x800"x60.0 73.50 1280 1312 1352 1464 800 804 808 837 (50.2 kHz)
    (**) fglrx(0): *Mode "1024x768": 73.5 MHz (scaled from 0.0 MHz), 50.2 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1024x768"x60.0 73.50 1024 1184 1224 1464 768 788 792 837 (50.2 kHz)
    (**) fglrx(0): *Mode "800x600": 73.5 MHz (scaled from 0.0 MHz), 50.2 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "800x600"x60.0 73.50 800 1072 1112 1464 600 704 708 837 (50.2 kHz)
    (**) fglrx(0): *Mode "640x480": 73.5 MHz (scaled from 0.0 MHz), 50.2 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x480"x60.0 73.50 640 992 1032 1464 480 644 648 837 (50.2 kHz)
    (**) fglrx(0): Default mode "848x480": 73.5 MHz (scaled from 0.0 MHz), 50.2 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "848x480"x60.0 73.50 848 1096 1136 1464 480 644 648 837 (50.2 kHz)
    (**) fglrx(0): Default mode "720x576": 73.5 MHz (scaled from 0.0 MHz), 50.2 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "720x576"x60.0 73.50 720 1032 1072 1464 576 692 696 837 (50.2 kHz)
    (**) fglrx(0): Default mode "720x480": 73.5 MHz (scaled from 0.0 MHz), 50.2 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "720x480"x60.0 73.50 720 1032 1072 1464 480 644 648 837 (50.2 kHz)
    (**) fglrx(0): Default mode "640x400": 73.5 MHz (scaled from 0.0 MHz), 50.2 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x400"x60.0 73.50 640 992 1032 1464 400 604 608 837 (50.2 kHz)
    (**) fglrx(0): Default mode "640x350": 73.5 MHz (scaled from 0.0 MHz), 50.2 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x350"x60.0 73.50 640 992 1032 1464 350 579 583 837 (50.2 kHz)
    (**) fglrx(0): Default mode "512x384": 73.5 MHz (scaled from 0.0 MHz), 50.2 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "512x384"x60.0 73.50 512 928 968 1464 384 596 600 837 (50.2 kHz)
    (**) fglrx(0): Default mode "400x300": 73.5 MHz (scaled from 0.0 MHz), 50.2 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "400x300"x60.0 73.50 400 872 912 1464 300 704 708 837 doublescan (50.2 kHz)
    (**) fglrx(0): Default mode "320x240": 73.5 MHz (scaled from 0.0 MHz), 50.2 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x240"x60.0 73.50 320 832 872 1464 240 644 648 837 doublescan (50.2 kHz)
    (**) fglrx(0): Default mode "320x200": 73.5 MHz (scaled from 0.0 MHz), 50.2 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x200"x60.0 73.50 320 832 872 1464 200 604 608 837 doublescan (50.2 kHz)
    (--) fglrx(0): Display dimensions: (330, 210) mm
    (--) fglrx(0): DPI set to (98, 96)
    (--) fglrx(0): Virtual size is 1280x800 (pitch 1280)
    (**) fglrx(0): *Mode "1280x800": 73.5 MHz (scaled from 0.0 MHz), 50.2 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1280x800"x60.0 73.50 1280 1312 1352 1464 800 804 808 837 (50.2 kHz)
    (**) fglrx(0): *Mode "1024x768": 73.5 MHz (scaled from 0.0 MHz), 50.2 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1024x768"x60.0 73.50 1024 1184 1224 1464 768 788 792 837 (50.2 kHz)
    (**) fglrx(0): *Mode "800x600": 73.5 MHz (scaled from 0.0 MHz), 50.2 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "800x600"x60.0 73.50 800 1072 1112 1464 600 704 708 837 (50.2 kHz)
    (**) fglrx(0): *Mode "640x480": 73.5 MHz (scaled from 0.0 MHz), 50.2 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x480"x60.0 73.50 640 992 1032 1464 480 644 648 837 (50.2 kHz)
    (**) fglrx(0): Default mode "848x480": 73.5 MHz (scaled from 0.0 MHz), 50.2 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "848x480"x60.0 73.50 848 1096 1136 1464 480 644 648 837 (50.2 kHz)
    (**) fglrx(0): Default mode "720x576": 73.5 MHz (scaled from 0.0 MHz), 50.2 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "720x576"x60.0 73.50 720 1032 1072 1464 576 692 696 837 (50.2 kHz)
    (**) fglrx(0): Default mode "720x480": 73.5 MHz (scaled from 0.0 MHz), 50.2 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "720x480"x60.0 73.50 720 1032 1072 1464 480 644 648 837 (50.2 kHz)
    (**) fglrx(0): Default mode "640x400": 73.5 MHz (scaled from 0.0 MHz), 50.2 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x400"x60.0 73.50 640 992 1032 1464 400 604 608 837 (50.2 kHz)
    (**) fglrx(0): Default mode "640x350": 73.5 MHz (scaled from 0.0 MHz), 50.2 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x350"x60.0 73.50 640 992 1032 1464 350 579 583 837 (50.2 kHz)
    (**) fglrx(0): Default mode "512x384": 73.5 MHz (scaled from 0.0 MHz), 50.2 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "512x384"x60.0 73.50 512 928 968 1464 384 596 600 837 (50.2 kHz)
    (**) fglrx(0): Default mode "400x300": 73.5 MHz (scaled from 0.0 MHz), 50.2 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "400x300"x60.0 73.50 400 872 912 1464 300 704 708 837 doublescan (50.2 kHz)
    (**) fglrx(0): Default mode "320x240": 73.5 MHz (scaled from 0.0 MHz), 50.2 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x240"x60.0 73.50 320 832 872 1464 240 644 648 837 doublescan (50.2 kHz)
    (**) fglrx(0): Default mode "320x200": 73.5 MHz (scaled from 0.0 MHz), 50.2 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x200"x60.0 73.50 320 832 872 1464 200 604 608 837 doublescan (50.2 kHz)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
    (==) fglrx(0): NoAccel = NO
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.2.0
    ABI class: X.Org Video Driver, version 2.0
    (==) fglrx(0): NoDRI = NO
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
    (==) fglrx(0): Capabilities: 0x00000000
    (==) fglrx(0): CapabilitiesEx: 0x00000000
    (==) fglrx(0): cpuFlags: 0x8000001d
    (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    (**) fglrx(0): ATI GART size: 255 MB
    (II) fglrx(0): [pcie] 261120 kB allocated
    (II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
    (**) fglrx(0): UseFastTLS=2
    (==) fglrx(0): BlockSignalsOnLock=1
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] 0 0 0xc0000000 - 0xc000ffff (0x10000) MX[b]
    [1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
    [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [6] -1 0 0xc0200000 - 0xc02007ff (0x800) MX[b]
    [7] -1 0 0xc0200800 - 0xc02008ff (0x100) MX[b]
    [8] -1 0 0xc0100000 - 0xc010ffff (0x10000) MX[b]
    [9] -1 0 0xc0500000 - 0xc0503fff (0x4000) MX[b]
    [10] -1 0 0xc0507400 - 0xc05077ff (0x400) MX[b]
    [11] -1 0 0xc0506000 - 0xc0506fff (0x1000) MX[b]
    [12] -1 0 0xc0505000 - 0xc0505fff (0x1000) MX[b]
    [13] -1 0 0xc0504000 - 0xc0504fff (0x1000) MX[b]
    [14] -1 0 0xc0507000 - 0xc05071ff (0x200) MX[b]
    [15] -1 0 0xc0000000 - 0xc000ffff (0x10000) MX[b](B)
    [16] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
    [17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
    [18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
    [19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
    [20] 0 0 0x00009000 - 0x000090ff (0x100) IX[b]
    [21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [22] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [23] -1 0 0x0000a400 - 0x0000a47f (0x80) IX[b]
    [24] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
    [25] -1 0 0x00008460 - 0x0000846f (0x10) IX[b]
    [26] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
    [27] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
    [28] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
    [29] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [30] -1 0 0x00008450 - 0x0000845f (0x10) IX[b]
    [31] -1 0 0x00008400 - 0x0000840f (0x10) IX[b]
    [32] -1 0 0x00008410 - 0x00008413 (0x4) IX[b]
    [33] -1 0 0x00008420 - 0x00008427 (0x8) IX[b]
    [34] -1 0 0x00008430 - 0x00008433 (0x4) IX[b]
    [35] -1 0 0x00008440 - 0x00008447 (0x8) IX[b]
    [36] -1 0 0x00009000 - 0x000090ff (0x100) IX[b](B)
    [37] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [38] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
    (II) fglrx(0): detected X.org 7.1.2.0
    (II) Loading extension ATIFGLRXDRI
    (II) fglrx(0): doing DRIScreenInit
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: Searching for BusID PCI:1:5:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: drmOpenMinor returns 8
    drmOpenByBusid: drmGetBusid reports PCI:1:5:0
    (II) [drm] DRM interface version 1.0
    (II) [drm] DRM open master succeeded.
    (II) fglrx(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) fglrx(0): [drm] framebuffer handle = 0x7000
    (II) fglrx(0): [drm] added 1 reserved context for kernel
    (II) fglrx(0): X context handle = 0x1
    (II) fglrx(0): DRIScreenInit done
    (II) fglrx(0): Kernel Module Version Information:
    (II) fglrx(0): Name: fglrx
    (II) fglrx(0): Version: 8.51.3
    (II) fglrx(0): Date: Jul 3 2008
    (II) fglrx(0): Desc: ATI FireGL DRM kernel module
    (II) fglrx(0): Kernel Module version matches driver.
    (II) fglrx(0): Kernel Module Build Time Information:
    (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.26-ARCH
    (II) fglrx(0): Build-Kernel MODVERSIONS: no
    (II) fglrx(0): Build-Kernel __SMP__: no
    (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
    (II) fglrx(0): [drm] register handle = 0x00009000
    (II) fglrx(0): Interrupt handler installed at IRQ 17.
    (II) fglrx(0): Exposed events to the /proc interface
    (EE) fglrx(0): Failed to allocate primary surface (frame buffer)!
    (II) fglrx(0): Shutdown CMMQS
    (II) fglrx(0): [drm] removed 1 reserved context for kernel
    (II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0x6000 at 0xb8027000
    (II) fglrx(0): [drm] Closed DRM master.
    (WW) fglrx(0): ***********************************************
    (WW) fglrx(0): * DRI initialization failed! *
    (WW) fglrx(0): * (maybe driver kernel module missing or bad) *
    (WW) fglrx(0): * 2D acceleraton available (MMIO) *
    (WW) fglrx(0): * no 3D acceleration available *
    (WW) fglrx(0): ********************************************* *
    (II) fglrx(0): FBADPhys: 0x38000000 FBMappedSize: 0x08000000
    (==) fglrx(0): Write-combining range (0xd0000000,0x8000000)
    (II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
    (II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,800) (front color buffer - assumption)
    (II) fglrx(0): Largest offscreen area available: 1280 x 7391
    (==) fglrx(0): Backing store disabled
    (II) Loading extension FGLRXEXTENSION
    (II) Loading extension ATITVOUT
    (**) fglrx(0): DPMS enabled
    (**) fglrx(0): Option "XaaNoOffscreenPixmaps" "true"
    (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    Solid Horizontal and Vertical Lines
    Setting up tile and stipple cache:
    32 128x128 slots
    32 256x256 slots
    16 512x512 slots
    (II) fglrx(0): Acceleration enabled
    (II) LoadModule: "amdxmm"
    (II) Loading /usr/lib/xorg/modules//amdxmm.so
    (II) Module amdxmm: vendor="X.Org Foundation"
    compiled for 7.1.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (EE) fglrx(0): XMM failed to open CMMQS connection.
    (II) fglrx(0): XMM failed to initialize!
    (II) fglrx(0): Direct rendering disabled
    (==) fglrx(0): Silken mouse enabled
    (==) fglrx(0): Using hardware cursor
    (==) RandR enabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension XAccessControlExtension
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension XFree86-Bigfont
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    (II) AIGLX: Screen 0 is not DRI capable
    (II) Loading sub module "GLcore"
    (II) LoadModule: "GLcore"
    (II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
    (II) Module GLcore: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (II) GLX: Initialized MESA-PROXY GL provider for screen 0
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xorg"
    (**) Keyboard0: XkbRules: "xorg"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "us"
    (**) Keyboard0: XkbLayout: "us"
    (WW) Option "XkbVariant" requires an string value
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (II) Synaptics touchpad driver version 0.14.6 (1406)
    (--) Synaptics Touchpad auto-dev sets device to /dev/input/event7
    (**) Option "Device" "/dev/input/event7"
    (**) Option "SHMConfig" "on"
    (**) Option "MaxTapTime" "0"
    (--) Synaptics Touchpad touchpad found
    (**) Option "CorePointer"
    (**) Synaptics Touchpad: always reports core events
    (**) Option "Protocol" "IMPS/2"
    (**) USB Mouse: Device: "/dev/input/mice"
    (**) USB Mouse: Protocol: "IMPS/2"
    (**) Option "SendCoreEvents"
    (**) USB Mouse: always reports core events
    (**) Option "Device" "/dev/input/mice"
    (**) Option "Buttons" "5"
    (==) USB Mouse: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5"
    (**) USB Mouse: ZAxisMapping: buttons 4 and 5
    (**) USB Mouse: Buttons: 9
    (**) USB Mouse: Sensitivity: 1
    (II) evaluating device (USB Mouse)
    (II) XINPUT: Adding extended input device "USB Mouse" (type: MOUSE)
    (II) evaluating device (Synaptics Touchpad)
    (II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: MOUSE)
    (II) evaluating device (Keyboard0)
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (II) USB Mouse: ps2EnableDataReporting: succeeded
    (--) Synaptics Touchpad auto-dev sets device to /dev/input/event7
    (**) Option "Device" "/dev/input/event7"
    (--) Synaptics Touchpad touchpad found
    (II) 3rd Button detected: disabling emulate3Button
    Section "ServerLayout"
    Identifier "Xorg Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Synaptics Touchpad" "CorePointer"
    InputDevice "USB Mouse" "SendCoreEvents"
    Option "AIGLX" "on"
    EndSection
    Section "Files"
    # Additional fonts: Locale, Gimp, TTF...
    # FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
    # FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
    # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc:unscaled"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi"
    FontPath "/usr/share/fonts/PEX"
    FontPath "/usr/share/fonts/cyrillic"
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/ttf/western"
    FontPath "/usr/share/fonts/ttf/decoratives"
    FontPath "/usr/share/fonts/truetype"
    FontPath "/usr/share/fonts/truetype/openoffice"
    FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath "/usr/share/fonts/latex-ttf-fonts"
    FontPath "/usr/share/fonts/defoma/CID"
    FontPath "/usr/share/fonts/defoma/TrueType"
    FontPath "/usr/share/fonts/artwiz-fonts/"
    EndSection
    Section "Module"
    Load "dbe"
    Load "dri"
    Load "extmod"
    Load "glx"
    Load "bitmap" # bitmap-fonts
    Load "freetype"
    Load "record"
    Load "synaptics"
    EndSection
    Section "ServerFlags"
    Option "AllowMouseOpenFail" "true"
    EndSection
    Section "InputDevice"
    Identifier "Synaptics Touchpad"
    Driver "synaptics"
    Option "CorePointer"
    Option "Device" "/dev/psaux"
    Option "Protocol" "auto-dev"
    Option "SHMConfig" "on"
    Option "MaxTapTime" "0"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "keyboard"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us"
    Option "XkbVariant" ""
    EndSection
    Section "InputDevice"
    Identifier "USB Mouse"
    Driver "mouse"
    Option "Device" "/dev/input/mice"
    Option "SendCoreEvents" "true"
    Option "Protocol" "IMPS/2"
    Option "ZAxisMapping" "4 5"
    Option "Buttons" "5"
    EndSection
    Section "Monitor"
    # Warning: This may fry old Monitors
    # Very conservative. May flicker.
    # VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
    # Default modes distilled from
    # "VESA and Industry Standards and Guide for Computer Display Monitor
    # Timing", version 1.0, revision 0.8, adopted September 17, 1998.
    # $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
    # 640x350 @ 85Hz (VESA) hsync: 37.9kHz
    Identifier "Monitor0"
    HorizSync 28.0 - 96.0
    VertRefresh 50.0 - 75.0
    ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
    ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
    ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
    ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
    ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
    ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
    ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
    ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
    ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
    ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
    ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
    ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
    ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
    ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
    ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
    ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
    ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
    ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
    ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
    ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
    ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
    ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
    ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
    ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
    ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
    ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
    ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
    ModeLine "1800x1440" 230.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
    ModeLine "1800x1440" 250.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
    ModeLine "640x480" 43.2 640 680 744 848 480 481 484 509 -hsync +vsync
    ModeLine "768x576" 35.0 768 792 872 976 576 577 580 597 -hsync +vsync
    ModeLine "768x576" 42.9 768 800 880 992 576 577 580 601 -hsync +vsync
    ModeLine "768x576" 45.5 768 808 888 1008 576 577 580 602 -hsync +vsync
    ModeLine "768x576" 51.8 768 808 888 1008 576 577 580 605 -hsync +vsync
    ModeLine "768x576" 62.6 768 816 896 1024 576 577 580 611 -hsync +vsync
    ModeLine "800x600" 68.2 800 848 936 1072 600 601 604 636 -hsync +vsync
    ModeLine "1024x768" 113.3 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
    ModeLine "1152x864" 81.6 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
    ModeLine "1152x864" 119.7 1152 1224 1352 1552 864 865 868 907 -hsync +vsync
    ModeLine "1152x864" 143.5 1152 1232 1360 1568 864 865 868 915 -hsync +vsync
    ModeLine "1280x960" 124.5 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync
    ModeLine "1280x960" 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
    ModeLine "1280x960" 179.0 1280 1376 1520 1760 960 961 964 1017 -hsync +vsync
    ModeLine "1280x1024" 191.0 1280 1376 1520 1760 1024 1025 1028 1085 -hsync +vsync
    ModeLine "1400x1050" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
    ModeLine "1400x1050" 149.3 1400 1496 1648 1896 1050 1051 1054 1094 -hsync +vsync
    ModeLine "1400x1050" 155.8 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
    ModeLine "1400x1050" 179.3 1400 1504 1656 1912 1050 1051 1054 1103 -hsync +vsync
    ModeLine "1400x1050" 214.4 1400 1512 1664 1928 1050 1051 1054 1112 -hsync +vsync
    ModeLine "1600x1200" 280.6 1600 1728 1904 2208 1200 1201 1204 1271 -hsync +vsync
    Option "DPMS" "true"
    # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "fglrx"
    Option "XAANoOffscreenPixmaps" "true"
    # Option "TexturedVideo" "on"
    # Option "Textured2D" "on"
    # Option "TexturedXRender" "on"
    Option "UseFastTLS" "2"
    # Option "BackingStore" "on"
    Option "VideoOverlay" "on"
    Option "OpenGLOverlay" "off"
    BusID "PCI:1:5:0"
    EndSection
    Section "Extensions"
    Option "XVideo" "Enable"
    # Option "RENDER" "Enable"
    # Option "DAMAGE" "Enable"
    # Option "Composite" "Enable"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 1
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 4
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 8
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 15
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1280x800" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 32
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection

  • Display issue with Macbook after SL upgrade

    Hi,
    I have a 2007 13" MacBook which I use to drive an external video projector via a mini-DVI to HDMI adapter (external video monitor set to 1080p@24Hz). It manages 1080p, just barely, with some hiccups on complex material. But the signal itself is a nice, clean (and pretty) 1080p.
    I thought that upgrading from Leopard to Snow Leopard, with a clean (formatted) install, would somehow get rid of some junk background processes and make the machine run a bit smoother.
    However, since installing SL, performance in 1080p is even worse than it was — the video has a deal-breaking "strobe" effect (i.e. the video updates only every 2nd or 3rd frame).
    Mirroring the display instead of using a secondary monitor plays smoothly, but then of course I don't get 1080p.
    What could possibly be the cause of this? Is SL a downgrade in terms of performance with 2007 machines? Can anything be done with the graphics subsystem to make it run better?
    Thanks for your help.

    I would take this to an Apple store for a definitive diagnosis.  This will be free.  Bring the screen shot with you.
    Then you will know exactly what you are dealing with and be able to determine what will be involved in rectifying the problem and the associated costs.
    Ciao.

  • Bookmarks issue with Preview after Mavericks upgrade.

    Hi,
      after upgrading to Mavericks my bookmarks in Preview are not named as before. Now they appear as a sequence of non-sense letters and numbers.
    Is there anyway to see all my hundreds of bookmarks as I named in the last couple of years?
    I am a scientist and I bookmarked something like 500 scientific papers. Please do not tell me that I have to re-do all the work.
    Pretty upset...
    GT

    Over a year later and Apple's still left us bookmarkers out in the cold.

  • TS1398 After the recent update of iOS 7.0.6 my phone is having issues with wifi connectivity. It gets disconnected most of the time. It is very toublesome while watching videos, sending pics, chatting and so on. Please advise. Thank you.

    After the recent update of iOS 7.0.6 my phone is having issues with wifi connectivity. It gets disconnected most of the time. I went through support page and done with "Reset Network settings" too but it doesn't help. It is very toublesome while watching videos, sending pics, chatting and so on. Please advise.
    It works fine in LTE network. The problem is with WIFI only.
    Thank you.

    Hey Siddh.s!
    Here is an article that will help you troubleshoot this issue with your Wi-Fi connections:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Trouble with wifi after IOS 6 upgrade

    I have an iPhone 4 and successfully installed iOS 6 today.  I am having trouble getting on my home wifi.  When asked to join my network, I click on it and type in my password.  Shortly after typing in my correct password an apple.com login page loads from the bottom of the iPhone but says "hmm, the page you're looking for cant be found".  The only option I have is to push cancel and then it ends my wifi connection with my own home network.  Help please. 

    burhansheikh replied to Trouble with wifi after IOS 6 upgrade
    "guys i have 100% solution copy Wi-FI address from about(general)(setting) & paste to Client ID in your network (Wi-FI) (setting)"
    in Using iPhone • 8 replies
    1

  • Recently started having issues with WiFi

    Hello everyone,
    Recently I started having serious issues with Wifi. I fixed it kind of by turning off iTunes iCloud backup, but generally the signal is low. As an iOS 5 tester in the Apple Developer program, I tested it for months on my iPod without any problems. When I got my 4S, I never had a problem with it until just a few days ago.
    A friend of mine said she was also having the same problem. She claimed she turned off iCloud backup as I did, turn off both WiFi on her Mac and on her phone and reboot both. I did this. Then I turned them back on. She also suggested I forget the network and re-enter the security key. That done, it connected and had a stronger signal. After a while though, it continues to drop peareoticly. I notice that it stay's connected a lot longer now. Another friend also suggested I turn off bluetooth, although that didn't really help much. What seems to fix it tempararly is iCloud backups have to go off.
    The Mac is still working great. No stupid connection errors and or dropping. I'd be curious to see if I would be having this problem with my iPod Touch. Probably not.
    Anyone find any deffinate solutions to this?
    Thanks.

    Thanks for the reply. What do you mean "2.4 GHz WiFi reliability is a hit or miss"?
    Warranty is over so no problem there.
    I see a lot of 7260 cards, is there one in specific I need? Example:
    http://goo.gl/PKcRIU
    http://goo.gl/ooaUEw
    N would actually be fine, don't really need AC, recently upgraded my router and don't feel compelled to change...the price difference is small, and I'm all for future-proofing, but, I just need the thing to WORK.
    Thanks again.
    -kj-
    T440p | Core i7 4700MQ @ 2.4 ghz | 8 GB | Samsung 840 EVO 240gb SSD | 14" | Intel HD Graphics | Windows 7 Pro 64-bit

  • Front cam deteriorated after lollipop upgrade

    Afte lollipop upgrade front cam pictures are very sloppy and blurry . Previously they were much much better now the picture quality is too bad as if I am using a 0.2 pixel cam
    Has anyone faced this issue pl help me

    I can assure everyone here that both the cameras are WORKING PERFECTLY FINE with me in fact after lollipop upgrade, the main camera has become much much much more awesome!
    Have a look at my Z1 cam's improvement - http://i.imgur.com/6Cor3JK.jpg
    Either the phone is still not updated correctly, or you have some wrong settings in your 'manual camera settings'
    Try this - Clear defaults, cache, and settings for your phone's camera application and try again.
    P.S. I was using GoogleCamera for these photos in kitkat and in lollipop as well (link attached)
    Feel free to ask away :-)

  • Issues with WiFi connection to Deskjet 3545

    Hi,
    I have number of issues with WiFi connection to my new Deskjet 3545 AIO:
    1. Printer is not able to get IP address automatically from home WiFi router (all other devices get IP with no problem). Using WPS allow printer to register in network but after switching off, WPS setting is not stored, so I have to do it again. This I was able to solve with manual entering of IP address, netwrok mask, DNS and gateway address.
    2. Official HP software installed from HP site was able to find printer for 3dattempt, and it started to work. But after a while, "HP utility" program loose connection to printer,  so I can not see any parameters, and I get "can not find printerä message when start to to print. After a some time (minutes to hours), whithout any action from my side, connection to printer seems to be restored, so I can see printer parameters in "HP utility" and printing is started.
    3.  Official HP software installed from HP site on PC (Windows 7) is not able to find printer on WiFi at all, works only with USB.
    All this is disaponinting and unexpected, as my office HP LaserJet Pro 400 Color works perfect.

    Hi @DmiBro,
    Welcome to the HP Forums!
    I see that you are having some wireless issues with your HP Deskjet 3545 to your Mac OS X 10.10 and Windows 7 computers. I am sorry to hear this, but I am happy to help!
    I would recommend the following guides:
    HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute.... (The solutions for OS X v10.8 Mountain Lion and OS X v10.9 Mavericks will work on Mac OS X 10.19 Yosemite.)
    HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute....
    HP ENVY 4500 and HP Deskjet Ink Advantage 3540 e-All-in-One Printer Series - Printer Does Not Mainta....
    Tips for troubleshooting wireless connection issues
    The following tips can help you troubleshoot and avoid wireless connectivity issues. You can try these tips separately or in combination to get a successful wireless signal.
    Move the printer and the computer closer to the router, but no closer than 6 ft (1.8 m). Wireless signals can be weaker at greater distances between the printer and the router.
    If you are experiencing an intermittent wireless connection, try restarting your router. Consult your router manufacturer, Internet service provider, or network administrator for instructions on how to restart the router.
    Remove any metal objects between the printer, the computer, and the router. Objects such as refrigerators, microwaves, or metal bookcases can interfere with wireless transmission.
    Move any device that emits radio signals, such as microwaves and cordless telephones, farther away from the printer. Such devices can interfere with wireless signals.
    I would also recommend this website, HP Wireless Printing Center - Troubleshooting Issues.
    Hope this information is helpful, and have a nice day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • A SERIOUS issue with WIFI in Pavilion 15-p002nk

     Hi  , Thank you for visiting the HP Support Forums and Welcome.Thank you for the very detailed information. I have looked into your issue about your  HP Pavilion 15-p002nk Notebook and issues with the Wireless disconnecting. Here is a link to the troubleshooting the Wireless connection, if you need it.
    If this continues I would change the Channel on the router. Routers are capable of communicating to your Notebook on several different channels. If your neighbours Wi-Fi is  on the same channel, your network speeds might have issues. Some say this helps fix this problem Microsoft Fix it.   Here is a link to help as well. Hope this is helpful. Thanks.

    Hi all.. Since the time i bought my new PC laptop "HP Pavilion 15 Notebook PC, Number: 2S23EA#BH4" , I've an issue with Wifi Connection; it's discconecting by itself sometime without any reason, then, it reconnect again like nothing happend because the "Connect automatically " option on Windows 8.1 is checked. Although, sometimes when it disconnect I have to reconnect by myself, after many troubles like  I have to restart the computer, or activating the Airlplane mode, disabling the Wifi cards and enable it again..  The strange behaviours of the Wifi connection is that is sometimes show me that the Wifi's stengh is full, all 5 bars, while it should be just like 2 bars or 3 at maximum, because where I'm connecting is a bit far from the router. but this just for few seconds before disconnecting, in addition, sometimes the Wifi card disable itself and re-enable at the moment and reconnect again. Moreover, once upon time when it disconnect, it dosen't detect my router or any other Wifi network around me. while there's more than 6 Wifi's available where i am living. Generally, this issue is not excessive, but those last days, it is being immoderate. i tried to look for some solution, but none of those proposed solution worked for me. I wish that i can find some resolution of this annoyning problem. advance Thank for everyone. 

Maybe you are looking for

  • Issues with outgoing payment

    Dear Experts, Core user wanted appears only bank accounts when he process out going payment with f-53. He doesnu2019t want to have all GL accounts (where we have more than 500 GL accounts).  He says it is difficult to identify among all.  Can we set

  • New Pages and Address Merge

    What happened to Address Merge Fields in the new pages?  I was use to drag and drop from address book. Richard

  • Storage unit type

    Hi, I would like to put a material away. but I get this error "Storage unit type is not allowed in storage type 050" where can I define the storage unit type for this storage type Thanks Dede

  • MW R12 upgrade questions

    Hi Folks, Just installed MW 2.17 and would like to a upgrade our E-Business from 11.5.10.2 to 12.1.3. I prepared a project which uses the Upgrade Assistant R12. I believe it plans to upgrade our application from 11.5.10.2 to 12.1.1. If that's the cas

  • HT2693 there was an xl file that was sent to me via mail, but i need to edit it an send it back and mac is not letting me do that

    I have installed office 2011 on my macbook air but still cannot use it or edit mail working.