Issue with Wireless Portable Devices

Dear Xperia: When I  try to connect my Xperial M Dual  Smart phone to the system I am getting the following message "Xperia Mdual has not been configured. Unable to associate your device with this system. You will need to manually enable the "Wireless Portable Devices" firewall exceptions while connected to public network. Also request you to kindly help me advantages of  configuring and associating the device with system and being connected to public network in the sense does this function help as a secondary internet backup. Expect ing a an expert advice as always from Sony. Regards  Murugu D

I'm not sure if you are trying to connect your computer to the internet using your phone or if you want to connect it wirelessly to share files. Could you please clarify?
The message you're seeing is because you are connected to a public network and in that case your computers firewall will block UPnP which is used to connect wirelessly to share media between the phone and computer. Are you sure you want to open your firewall for this on the network you're connected to? You don't need to do this for using the phone as a modem.

Similar Messages

  • HT5219 When can we expect a fix for the Windows 8.1 hot-plug issue with a Thunderbolt device.

    When can we expect a fix for the Windows 8.1 hotplug issue with a Thunderbolt device.  I got a dock to easy my up-and-go time when moving from using my laptop on the desk vs in meetings.  Instead my computer crashes and I have to reboot.
    I am seeing this issue with the 2012 Macbook pro Retina running Bootcamp with Windows 8.1 x64 bit with the F4U055 Dock from Belkin

    I can confirm that hotplug does work properly on Windows 8.1 with Asus Thunderbolt ExII (Thunderbolt 2)
    But does not work with Windows 8.1 and MacBook Pro Retina (Thunderbolt 1)
    To get hot plug working with the Asus Thunderbolt ExII, you install the intel thunderbolt drivers, and then you get an interface where you can eject devices, and do things like setup more detailed security. However, this doesn't have any effect with the MacBook Pro. I suspect that either:
    1) Apple's Thunderbolt hardware doesn't support hotplugging on windows
    2) Hotplugging on Windows requires Thunderbolt 2
    So, I should check on my Mac Pro (dustbin edition) to see if it works there with Thunderbolt II
    Be great to hear if anybody has any success with this on an Apple device!

  • Issue with Wireless AP.

    Hi All,
    Greetings. 
    we have an issue with user who says that he is unable to connect to AP and he need to re-boot it everytime to re-connect to it.
    But when i check from WLC all the AP uptime is more than 150 days and the AP associate time of respective AP's is also more than 150 days.we are using cisco AIR-CT2504-K9 wlc and all the AP's are connected to Cisco 3750X and cisco4510R+E.please suggest.
    pasting logs from wlc below.
    Tue Feb 26 17:06:05 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 207) for client 88:53:95:7b:8f:56 / user 'unknown'
    1 Tue Feb 26 17:06:05 2013 RADIUS server 10.12.2.34:1813 activated on WLAN 1
    2 Tue Feb 26 17:06:05 2013 RADIUS server 10.19.3.108:1813 deactivated on WLAN 1
    3 Tue Feb 26 17:06:05 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 206) for client 60:c5:47:44:4d:d7 / user 'unknown'
    4 Tue Feb 26 17:06:05 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 191) for client 88:53:95:7b:8f:56 / user 'unknown'
    5 Tue Feb 26 17:06:05 2013 RADIUS server 10.19.3.108:1813 activated on WLAN 1
    6 Tue Feb 26 17:06:05 2013 RADIUS server 10.12.2.33:1813 deactivated on WLAN 1
    7 Tue Feb 26 17:06:05 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 190) for client 60:c5:47:44:4d:d7 / user 'unknown'
    8 Tue Feb 26 16:51:24 2013 User guest logged Out. Client MAC:8c:a9:82:ae:a2:4a, Client IP:10.40.101.33, AP MAC:0c:85:25:c7:dc:e0, AP Name:NTW100-AP07
    9 Tue Feb 26 16:45:16 2013 RADIUS server 10.12.2.33:1813 activated on WLAN 1
    10 Tue Feb 26 16:45:16 2013 RADIUS server 10.12.2.34:1813 deactivated on WLAN 1
    11 Tue Feb 26 16:45:16 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 44) for client 10:40:f3:5e:3b:26 / user 'unknown'
    12 Tue Feb 26 16:45:16 2013 RADIUS server 10.12.2.34:1813 activated on WLAN 1
    13 Tue Feb 26 16:45:16 2013 RADIUS server 10.19.3.108:1813 deactivated on WLAN 1
    14 Tue Feb 26 16:45:16 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 204) for client 10:40:f3:5e:3b:26 / user 'unknown'
    15 Tue Feb 26 16:05:29 2013 RADIUS server 10.12.2.34:1813 activated in global list
    16 Tue Feb 26 16:05:29 2013 RADIUS server 10.12.2.33:1813 deactivated in global list
    17 Tue Feb 26 16:05:29 2013 RADIUS server 10.12.2.33:1813 deactivated in global list
    18 Tue Feb 26 16:05:29 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 113) for client b8:c7:5d:e0:48:be / user 'unknown'
    19 Tue Feb 26 16:05:29 2013 RADIUS server 10.12.2.33:1813 activated in global list
    20 Tue Feb 26 16:05:29 2013 RADIUS server 10.19.3.104:1813 deactivated in global list
    21 Tue Feb 26 16:05:29 2013 RADIUS server 10.19.3.104:1813 deactivated in global list
    22 Tue Feb 26 16:05:29 2013 RADIUS server 10.19.3.104:1813 failed to respond to request (ID 132) for client b8:c7:5d:e0:48:be / user 'unknown'
    23 Tue Feb 26 16:05:17 2013 User guest logged Out. Client MAC:00:22:fa:95:d2:58, Client IP:10.40.101.69, AP MAC:0c:85:25:c7:dc:e0, AP Name:NTW100-AP07
    24 Tue Feb 26 15:42:36 2013 RADIUS server 10.19.3.108:1813 activated on WLAN 1
    25 Tue Feb 26 15:42:36 2013 RADIUS server 10.12.2.33:1813 deactivated on WLAN 1
    26 Tue Feb 26 15:42:36 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 111) for client 7c:c5:37:18:ca:2b / user 'unknown'
    27 Tue Feb 26 15:35:53 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 247) for client 68:a8:6d:e9:7d:36 / user 'unknown'
    28 Tue Feb 26 15:35:53 2013 RADIUS server 10.12.2.33:1813 activated on WLAN 1
    29 Tue Feb 26 15:35:53 2013 RADIUS server 10.12.2.34:1813 deactivated on WLAN 1
    30 Tue Feb 26 15:35:53 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 246) for client 68:a8:6d:e9:7d:36 / user 'unknown'
    31 Tue Feb 26 15:35:53 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 137) for client 68:a8:6d:e9:7d:36 / user 'unknown'
    32 Tue Feb 26 15:35:53 2013 RADIUS server 10.12.2.34:1813 activated on WLAN 1
    33 Tue Feb 26 15:35:53 2013 RADIUS server 10.19.3.108:1813 deactivated on WLAN 1
    34 Tue Feb 26 15:35:53 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 136) for client 68:a8:6d:e9:7d:36 / user 'unknown'
    35 Tue Feb 26 15:06:17 2013 RADIUS server 10.19.3.108:1813 activated on WLAN 1
    36 Tue Feb 26 15:06:17 2013 RADIUS server 10.12.2.33:1813 deactivated on WLAN 1
    37 Tue Feb 26 15:06:17 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 67) for client 24:ab:81:af:2f:da / user 'unknown'
    38 Tue Feb 26 14:49:54 2013 RADIUS server 10.12.2.33:1813 activated on WLAN 1
    39 Tue Feb 26 14:49:54 2013 RADIUS server 10.12.2.34:1813 deactivated on WLAN 1
    40 Tue Feb 26 14:49:54 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 245) for client b8:17:c2:49:d5:37 / user 'unknown'
    41 Tue Feb 26 14:49:54 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 229) for client c0:9f:42:65:37:af / user 'unknown'
    42 Tue Feb 26 14:49:54 2013 RADIUS server 10.12.2.34:1813 activated on WLAN 1
    43 Tue Feb 26 14:49:54 2013 RADIUS server 10.19.3.108:1813 deactivated on WLAN 1
    44 Tue Feb 26 14:49:54 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 230) for client 60:fa:cd:b6:f6:d6 / user 'unknown'
    45 Tue Feb 26 14:49:54 2013 RADIUS server 10.19.3.108:1813 activated on WLAN 1
    46 Tue Feb 26 14:49:54 2013 RADIUS server 10.12.2.33:1813 deactivated on WLAN 1
    47 Tue Feb 26 14:49:54 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 228) for client b8:17:c2:49:d5:37 / user 'unknown'
    48 Tue Feb 26 14:49:54 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 243) for client c0:9f:42:65:37:af / user 'unknown'
    49 Tue Feb 26 14:49:54 2013 RADIUS server 10.12.2.33:1813 activated on WLAN 1
    50 Tue Feb 26 14:49:54 2013 RADIUS server 10.12.2.34:1813 deactivated on WLAN 1
    51 Tue Feb 26 14:49:54 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 242) for client 60:fa:cd:b6:f6:d6 / user 'unknown'
    52 Tue Feb 26 14:14:41 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 227) for client 0c:77:1a:a7:97:6e / user 'unknown'
    53 Tue Feb 26 14:14:41 2013 RADIUS server 10.12.2.34:1813 activated on WLAN 1
    54 Tue Feb 26 14:14:41 2013 RADIUS server 10.19.3.108:1813 deactivated on WLAN 1
    55 Tue Feb 26 14:14:41 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 226) for client 0c:77:1a:a7:97:6e / user 'unknown'
    56 Tue Feb 26 14:14:41 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 226) for client 0c:77:1a:a7:97:6e / user 'unknown'
    57 Tue Feb 26 14:14:41 2013 RADIUS server 10.19.3.108:1813 activated on WLAN 1
    58 Tue Feb 26 14:14:41 2013 RADIUS server 10.12.2.33:1813 deactivated on WLAN 1
    59 Tue Feb 26 14:14:41 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 225) for client 0c:77:1a:a7:97:6e / user 'unknown'
    60 Tue Feb 26 14:13:57 2013 RADIUS server 10.12.2.33:1813 activated on WLAN 1
    61 Tue Feb 26 14:13:57 2013 RADIUS server 10.12.2.34:1813 deactivated on WLAN 1
    62 Tue Feb 26 14:13:57 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 34) for client ec:85:2f:a2:4d:ba / user 'unknown'
    63 Tue Feb 26 14:13:57 2013 RADIUS server 10.12.2.34:1813 activated on WLAN 1
    64 Tue Feb 26 14:13:57 2013 RADIUS server 10.19.3.108:1813 deactivated on WLAN 1
    65 Tue Feb 26 14:13:57 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 225) for client ec:85:2f:a2:4d:ba / user 'unknown'
    66 Tue Feb 26 13:22:55 2013 Radar signals have been cleared on channel 52 by 802.11a radio with MAC: 00:1f:ca:cc:f0:00 and slot 1
    67 Tue Feb 26 13:20:02 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 214) for client e8:8d:28:7f:0e:5a / user 'unknown'
    68 Tue Feb 26 13:20:02 2013 RADIUS server 10.19.3.108:1813 activated on WLAN 1
    69 Tue Feb 26 13:20:02 2013 RADIUS server 10.12.2.33:1813 deactivated on WLAN 1
    70 Tue Feb 26 13:20:02 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 213) for client e8:8d:28:7f:0e:5a / user 'unknown'
    71 Tue Feb 26 13:20:02 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 33) for client e8:8d:28:7f:0e:5a / user 'unknown'
    72 Tue Feb 26 13:20:02 2013 RADIUS server 10.12.2.33:1813 activated on WLAN 1
    73 Tue Feb 26 13:20:02 2013 RADIUS server 10.12.2.34:1813 deactivated on WLAN 1
    74 Tue Feb 26 13:20:02 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 32) for client e8:8d:28:7f:0e:5a / user 'unknown'
    75 Tue Feb 26 12:52:55 2013 AP's Interface:1(802.11a) Operation State Up: Base Radio MAC:00:1f:ca:cc:f0:00 Cause=Radio channel set. Status:NA
    76 Tue Feb 26 12:52:54 2013 AP's Interface:1(802.11a) Operation State Down: Base Radio MAC:00:1f:ca:cc:f0:00 Cause=Radio channel set. Status:NA
    77 Tue Feb 26 12:52:54 2013 Radar signals have been detected on channel 52 by 802.11a radio with MAC: 00:1f:ca:cc:f0:00 and slot 1
    78 Tue Feb 26 12:48:34 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 164) for client 7c:c5:37:18:ca:2b / user 'unknown'
    79 Tue Feb 26 12:48:34 2013 RADIUS server 10.12.2.34:1813 activated on WLAN 1
    80 Tue Feb 26 12:48:34 2013 RADIUS server 10.19.3.108:1813 deactivated on WLAN 1
    81 Tue Feb 26 12:48:34 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 163) for client 7c:c5:37:18:ca:2b / user 'unknown'
    82 Tue Feb 26 12:48:34 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 212) for client 7c:c5:37:18:ca:2b / user 'unknown'
    83 Tue Feb 26 12:48:34 2013 RADIUS server 10.19.3.108:1813 activated on WLAN 1
    84 Tue Feb 26 12:48:34 2013 RADIUS server 10.12.2.33:1813 deactivated on WLAN 1
    85 Tue Feb 26 12:48:34 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 211) for client 7c:c5:37:18:ca:2b / user 'unknown'
    86 Tue Feb 26 12:45:09 2013 AP NTW100-AP07[1] (0c:85:25:c7:dc:e0) Device ID: 0x2019, Type: WiFi Invalid Channel[31], Severity: 2, Channels: 161, Cluster ID: 1c:75:a0:02:41:22, Previous Cluster ID: 1c:75:a0:02:41:22, Event: Clear
    87 Tue Feb 26 12:42:07 2013 AP NTW100-AP07[1] (0c:85:25:c7:dc:e0) Device ID: 0x2019, Type: WiFi Invalid Channel[31], Severity: 3, Channels: 161, Cluster ID: 1c:75:a0:02:41:22, Previous Cluster ID: 1c:75:a0:02:41:22, Event: Set
    88 Tue Feb 26 12:41:25 2013 AP NTW100-AP07[1] (0c:85:25:c7:dc:e0) Device ID: 0x2018, Type: WiFi Invalid Channel[31], Severity: 2, Channels: 161, Cluster ID: 1c:75:a0:02:41:22, Previous Cluster ID: 1c:75:a0:02:41:22, Event: Clear
    89 Tue Feb 26 12:37:38 2013 AP NTW100-AP07[1] (0c:85:25:c7:dc:e0) Device ID: 0x2018, Type: WiFi Invalid Channel[31], Severity: 2, Channels: 161, Cluster ID: 1c:75:a0:02:41:22, Previous Cluster ID: 1c:75:a0:02:41:22, Event: Set
    90 Tue Feb 26 12:35:47 2013 AP NTW100-AP07[1] (0c:85:25:c7:dc:e0) Device ID: 0x2017, Type: WiFi Invalid Channel[31], Severity: 2, Channels: 161, Cluster ID: 1c:75:a0:02:41:01, Previous Cluster ID: 1c:75:a0:02:41:01, Event: Clear
    91 Tue Feb 26 12:20:01 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 115) for client e8:8d:28:7f:0e:5a / user 'unknown'
    92 Tue Feb 26 12:20:01 2013 RADIUS server 10.12.2.33:1813 activated on WLAN 1
    93 Tue Feb 26 12:20:01 2013 RADIUS server 10.12.2.34:1813 deactivated on WLAN 1
    94 Tue Feb 26 12:20:01 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 114) for client e8:8d:28:7f:0e:5a / user 'unknown'
    95 Tue Feb 26 12:20:01 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 162) for client e8:8d:28:7f:0e:5a / user 'unknown'
    96 Tue Feb 26 12:20:01 2013 RADIUS server 10.12.2.34:1813 activated on WLAN 1
    97 Tue Feb 26 12:20:01 2013 RADIUS server 10.19.3.108:1813 deactivated on WLAN 1
    98 Tue Feb 26 12:20:01 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 161) for client e8:8d:28:7f:0e:5a / user 'unknown'
    99 Tue Feb 26 12:18:26 2013 User inventiv-guest logged in. Client MAC:8c:a9:82:ae:a2:4a, Client IP:10.40.101.33, AP MAC:0c:85:25:c7:dc:e0, AP Name:NTW100-AP07
    100 Tue Feb 26 12:11:01 2013 RADIUS server 10.12.50.52:1813 failed to respond to request (ID 106) for client a4:67:06:dd:ed:6a / user 'unknown'
    101 Tue Feb 26 12:11:01 2013 RADIUS server 10.19.3.104:1813 activated in global list
    102 Tue Feb 26 12:11:01 2013 RADIUS server 10.12.50.52:1813 deactivated in global list
    103 Tue Feb 26 12:11:01 2013 RADIUS server 10.12.50.52:1813 deactivated in global list
    104 Tue Feb 26 12:11:01 2013 RADIUS server 10.12.50.52:1813 failed to respond to request (ID 105) for client a4:67:06:dd:ed:6a / user 'unknown'
    105 Tue Feb 26 12:11:01 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 108) for client a4:67:06:dd:ed:6a / user 'unknown'
    106 Tue Feb 26 12:11:01 2013 RADIUS server 10.12.50.52:1813 activated in global list
    107 Tue Feb 26 12:11:01 2013 RADIUS server 10.19.3.108:1813 deactivated in global list
    108 Tue Feb 26 12:11:01 2013 RADIUS server 10.19.3.108:1813 deactivated in global list
    109 Tue Feb 26 12:11:01 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 107) for client a4:67:06:dd:ed:6a / user 'unknown'
    110 Tue Feb 26 12:10:12 2013 AP NTW100-AP07[1] (0c:85:25:c7:dc:e0) Device ID: 0x2017, Type: WiFi Invalid Channel[31], Severity: 0, Channels: 161, Cluster ID: 1c:75:a0:02:41:01, Previous Cluster ID: 1c:75:a0:02:41:01, Event: Set
    111 Tue Feb 26 11:45:29 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 68) for client 28:e0:2c:38:64:b3 / user 'unknown'
    112 Tue Feb 26 11:45:29 2013 RADIUS server 10.19.3.108:1813 activated on WLAN 1
    113 Tue Feb 26 11:45:29 2013 RADIUS server 10.12.2.33:1813 deactivated on WLAN 1
    114 Tue Feb 26 11:45:29 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 67) for client 28:e0:2c:38:64:b3 / user 'unknown'
    115 Tue Feb 26 11:45:29 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 113) for client 28:e0:2c:38:64:b3 / user 'unknown'
    116 Tue Feb 26 11:45:29 2013 RADIUS server 10.12.2.33:1813 activated on WLAN 1
    117 Tue Feb 26 11:45:29 2013 RADIUS server 10.12.2.34:1813 deactivated on WLAN 1
    118 Tue Feb 26 11:45:29 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 112) for client 28:e0:2c:38:64:b3 / user 'unknown'
    119 Tue Feb 26 11:42:27 2013 RADIUS server 10.12.2.34:1813 activated on WLAN 1
    120 Tue Feb 26 11:42:27 2013 RADIUS server 10.19.3.108:1813 deactivated on WLAN 1
    121 Tue Feb 26 11:42:27 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 183) for client 7c:c5:37:18:ca:2b / user 'unknown'
    122 Tue Feb 26 11:14:06 2013 RADIUS server 10.19.3.108:1813 activated on WLAN 1
    123 Tue Feb 26 11:14:06 2013 RADIUS server 10.12.2.33:1813 deactivated on WLAN 1
    124 Tue Feb 26 11:14:06 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 65) for client 7c:c5:37:18:ca:2b / user 'unknown'
    125 Tue Feb 26 11:06:56 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 93) for client ec:85:2f:a2:4d:ba / user 'unknown'
    126 Tue Feb 26 11:06:56 2013 RADIUS server 10.12.2.33:1813 activated on WLAN 1
    127 Tue Feb 26 11:06:56 2013 RADIUS server 10.12.2.34:1813 deactivated on WLAN 1
    128 Tue Feb 26 11:06:56 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 92) for client ec:85:2f:a2:4d:ba / user 'unknown'
    129 Tue Feb 26 11:06:56 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 200) for client ec:85:2f:a2:4d:ba / user 'unknown'
    130 Tue Feb 26 11:06:56 2013 RADIUS server 10.12.2.34:1813 activated on WLAN 1
    131 Tue Feb 26 11:06:56 2013 RADIUS server 10.19.3.108:1813 deactivated on WLAN 1
    132 Tue Feb 26 11:06:56 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 199) for client ec:85:2f:a2:4d:ba / user 'unknown'
    133 Tue Feb 26 10:54:54 2013 RADIUS server 10.19.3.108:1813 activated on WLAN 1
    134 Tue Feb 26 10:54:54 2013 RADIUS server 10.12.2.33:1813 deactivated on WLAN 1
    135 Tue Feb 26 10:54:54 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 16) for client 34:15:9e:f0:00:bf / user 'unknown'
    136 Tue Feb 26 10:54:54 2013 RADIUS server 10.12.2.33:1813 activated on WLAN 1
    137 Tue Feb 26 10:54:54 2013 RADIUS server 10.12.2.34:1813 deactivated on WLAN 1
    138 Tue Feb 26 10:54:54 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 90) for client 34:15:9e:f0:00:bf / user 'unknown'
    139 Tue Feb 26 10:46:56 2013 RADIUS server 10.12.2.34:1813 activated on WLAN 1
    140 Tue Feb 26 10:46:56 2013 RADIUS server 10.19.3.108:1813 deactivated on WLAN 1
    141 Tue Feb 26 10:46:56 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 38) for client ec:85:2f:eb:d0:0b / user 'unknown'
    142 Tue Feb 26 10:46:56 2013 RADIUS server 10.19.3.108:1813 activated on WLAN 1
    143 Tue Feb 26 10:46:56 2013 RADIUS server 10.12.2.33:1813 deactivated on WLAN 1
    144 Tue Feb 26 10:46:56 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 15) for client ec:85:2f:a2:4d:ba / user 'unknown'
    145 Tue Feb 26 10:46:56 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 31) for client 60:fa:cd:b6:f6:d6 / user 'unknown'
    146 Tue Feb 26 10:46:56 2013 RADIUS server 10.12.2.33:1813 activated on WLAN 1
    147 Tue Feb 26 10:46:56 2013 RADIUS server 10.12.2.34:1813 deactivated on WLAN 1
    148 Tue Feb 26 10:46:56 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 32) for client ec:85:2f:eb:d0:0b / user 'unknown'
    149 Tue Feb 26 10:46:56 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 35) for client ec:85:2f:a2:4d:ba / user 'unknown'
    150 Tue Feb 26 10:46:56 2013 RADIUS server 10.12.2.34:1813 activated on WLAN 1
    151 Tue Feb 26 10:46:56 2013 RADIUS server 10.19.3.108:1813 deactivated on WLAN 1
    152 Tue Feb 26 10:46:56 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 34) for client 60:fa:cd:b6:f6:d6 / user 'unknown'
    153 Tue Feb 26 10:41:10 2013 AP NTW100-AP17[0] (18:33:9d:b7:a0:70) Device ID: 0x319a, Type: WiFi Invalid Channel[31], Severity: 2, Channels: 6, Cluster ID: 1c:75:a0:02:40:c7, Previous Cluster ID: 1c:75:a0:02:40:c7, Event: Clear
    154 Tue Feb 26 10:38:54 2013 AP NTW100-AP17[0] (18:33:9d:b7:a0:70) Device ID: 0x319a, Type: WiFi Invalid Channel[31], Severity: 2, Channels: 6, Cluster ID: 1c:75:a0:02:40:c7, Previous Cluster ID: 1c:75:a0:02:40:c7, Event: Set
    155 Tue Feb 26 10:24:39 2013 AP NTW100-AP17[0] (18:33:9d:b7:a0:70) Device ID: 0x3197, Type: WiFi Invalid Channel[31], Severity: 2, Channels: 6, Cluster ID: 1c:75:a0:02:40:c1, Previous Cluster ID: 1c:75:a0:02:40:c1, Event: Clear
    156 Tue Feb 26 10:22:46 2013 AP NTW100-AP17[0] (18:33:9d:b7:a0:70) Device ID: 0x3197, Type: WiFi Invalid Channel[31], Severity: 2, Channels: 6, Cluster ID: 1c:75:a0:02:40:c1, Previous Cluster ID: 1c:75:a0:02:40:c1, Event: Set
    157 Tue Feb 26 10:15:02 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 13) for client b4:f0:ab:06:25:b6 / user 'unknown'
    158 Tue Feb 26 10:15:02 2013 RADIUS server 10.19.3.108:1813 activated on WLAN 1
    159 Tue Feb 26 10:15:02 2013 RADIUS server 10.12.2.33:1813 deactivated on WLAN 1
    160 Tue Feb 26 10:15:02 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 12) for client b4:f0:ab:06:25:b6 / user 'unknown'
    161 Tue Feb 26 10:15:02 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 30) for client b4:f0:ab:06:25:b6 / user 'unknown'
    162 Tue Feb 26 10:15:02 2013 RADIUS server 10.12.2.33:1813 activated on WLAN 1
    163 Tue Feb 26 10:15:02 2013 RADIUS server 10.12.2.34:1813 deactivated on WLAN 1
    164 Tue Feb 26 10:15:02 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 29) for client b4:f0:ab:06:25:b6 / user 'unknown'
    165 Tue Feb 26 09:59:58 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 38) for client ec:85:2f:eb:d0:0b / user 'unknown'
    166 Tue Feb 26 09:59:58 2013 RADIUS server 10.12.2.34:1813 activated on WLAN 1
    167 Tue Feb 26 09:59:58 2013 RADIUS server 10.19.3.108:1813 deactivated on WLAN 1
    168 Tue Feb 26 09:59:58 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 37) for client ec:85:2f:eb:d0:0b / user 'unknown'
    169 Tue Feb 26 09:59:58 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 11) for client ec:85:2f:eb:d0:0b / user 'unknown'
    170 Tue Feb 26 09:59:58 2013 RADIUS server 10.19.3.108:1813 activated on WLAN 1
    171 Tue Feb 26 09:59:58 2013 RADIUS server 10.12.2.33:1813 deactivated on WLAN 1
    172 Tue Feb 26 09:59:58 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 10) for client ec:85:2f:eb:d0:0b / user 'unknown'
    173 Tue Feb 26 09:49:25 2013 RADIUS server 10.12.2.33:1813 activated on WLAN 1
    174 Tue Feb 26 09:49:25 2013 RADIUS server 10.12.2.34:1813 deactivated on WLAN 1
    175 Tue Feb 26 09:49:25 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 156) for client 8c:58:77:8e:a3:f6 / user 'unknown'
    176 Tue Feb 26 09:46:41 2013 RADIUS server 10.12.2.34:1813 activated on WLAN 1
    177 Tue Feb 26 09:46:41 2013 RADIUS server 10.19.3.108:1813 deactivated on WLAN 1
    178 Tue Feb 26 09:46:41 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 16) for client 24:ab:81:af:2f:da / user 'unknown'

    Can you post the output to the command "debug client "?
    Can you try if the client has any issues if he was connected to an SSID with OPEN authentication?
    Is the wireless NIC drivers updated?

  • Satellite L500 and issues with wireless connection

    Hello people
    Ill just throw my problem out there.
    First of all my details and info which may help you help me!
    Satellite L500 running windows 7 (note: same issues when Vista was installed)
    Latest wireless drivers as well as latest drivers for everything else.
    My wireless router is a billion voip enabled router 7000 series its quite a good one for when I got it about 2 yrs ago and works fine.
    Basically the problem is the wireless on my Satellite L500 keeps dropping out. Im no more than 20m away at most, right now Im 10m away with 1 wall in the way. I tried to get to a website and it says connection dropped out or unable to find host.
    However the other laptops in the same room same spot at the same time has no issues at all. Never has.
    As soon as I go into the same room as my router it works again. Sometimes works if I just stand on the opposite wall.
    So basically Im thinking my wireless card in my laptop is either faulty or just no good?
    Can u replace the wireless card with a different one? Maybe the Toshiba ones are just no good? Ive read so many problems with these wireless cards in Toshibas...
    Anyone have any ideas? Have I missed any info u need? Ill repost again in a day or so with the types of wireless devices in each laptop.

    Hi
    At the moment I doubt that your WLAN card is faulty. Before you exchange it you should also update your BIOS and not only the WLAN card driver. Both updates you should download from the Toshiba website:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    I had a similar issue with my Toshiba notebook and WLAN connection. The problem was the WLAN power saving mode in Windows Power Management. There you can also choose a power saving mode for the WLAN card. Disable it and choose Maximum Performance.

  • Having issues with wireless on my iMac

    Hello,
    I have had my iMac since August of 2011 and sometime last year I decided to upgrade to Lion (like maybe a two three months after I got it). The upgrade was rather smooth, with the big exception that ever since I have updated to Lion I have had annoying issues with my Wireless Internet. I know that this is a known issue, but I am hoping to get some answers/assistance... maybe there is something I can do in my particular case.
    Originally the issue was that whenever I turned on the computer from sleep, the Internet was disconnected. Now, I have a been a iMac/Mac Mini user for over 7 years now and I never had such issue, you turn on the computer, the Internet goes on with it too. It would require me to manually connect to the Internet evertime by selecting our Wireless Network from the drop-down menu.
    About, I want to say, two months ago? Apple sent out a fix via Software Update that said it would correct issues with the iMac wireless not turning on when returning from sleep, "Finally!" I thought and I enthusiatically waited for the update to come.... and it came and it just made things worse. It doesn't make me manually connect the Network anymore, but it takes it sweet time connecting (like a minute some times) and other times it will connect and disconnect a few times before not giving any more problems. Oh did I mention sometimes it just decides to turn off for no reason at all? Yeah, happens a lot. Especially annoying when I am excersizing my nerd rights and playing an MMO and suddenly get booted from the game because for whatever reason my Internet decides to log me off.
    This morning, it was connected to the Internet but websites were taking forever to download, eventually Chrome was just giving up and saying it couldn't connect... but the Internet was connected (full bars if it makes any difference). I tried turning Airpor on and off but no dice. Now, this totally sounds like a router issue, except my boyfriend was sitting behind me on his brand-spanking-new HP and he was happily surfing Reddit or whatever he does whilst online, no issues there.
    So the question is: Is it possible to "revert" back to the time before the update? I guess I could use Time Machine, but uhh, I dont want to revert the whole computer. So how exactly would that work (Time Machine noob here)? Is it possible to look at updates done and simply remove? Also, is there a more amicable fix that packing the whole thing up and taking it to the Genius bar? I'm willing to try some DIY fixes as long as they dont involve messing up with the whole network, especially since no other device is having issues, just this one and we have a lot devices.

    If you have a router that can do a 5GHZ network try it. There seems to be less interference in that part of the spectrum.
    Apple DNS Servers:
    208.67.222.222
    208.67.220.220
    Wireless Improvements
    Move the Base Station If interference is particularly bad in one part of your house or office, move the base station to another location. But this can be tricky if your AirPort base station has to connect to the broadband feed coming into the house and that feed happens to enter at a particularly interference-prone spot.
    Use the 5GHz Band Compared with the 2.4GHz band, the 5GHz band is practically empty. The newest AirPort Extreme Base Station is one of the few Wi-Fi base stations designed for home use that work in that 5GHz band. All of Apple’s Core 2 Duo laptops and iMacs (except the discontinued 17-inch 1.87GHz model) can also use the 5GHz band; with the build-to-order wireless option, so can the Mac Pro.
    To switch to the 5GHz band, launch AirPort Utility, select your base station, and switch to Manual Setup. Click on the AirPort button and select the Wireless tab. Select 802.11n Only (5 GHz) from the Radio Mode pop-up menu. Click on the Wireless Options button and select Use Wide Channels. Click on Update to restart the base station.
    Currently, no Mac-compatible adapters enable you to use the 5GHz band in older Macs or with older versions of OS X.

  • Issues with multiple firewire devices

    Over the past few months, I've noticed issues when daisy chaining FW devices to my MBP (a 15" purchased September 2009. Specs are posted in the signature). It often seems that a third device causes connectivity issues. 2 will always work fine (any 2) and of course 1 device is a no-brainer. But as soon as I add a 3rd to the chain, stuff happens, Specifics:
    This usually involves 2 hard drives and an audio interface.
    The audio interface has a FW 400 input. The hard drives have 800 and 400, among other options.
    Since I can always successfully run any 2 devices without issues, I have to eliminate the drives, cables, or the new audio interface as a problem (??)
    I'm not aware of any storm or electrical surge to have done damage. Anything is possible, of course.
    For my day-2-day work, I need both drives and the audio interface up and running.
    Data always seems fine.
    The main question is are there any known issues with the FW port/chip on these MBP's. But also, how can I test the FW port integrity?
    Thanks in advance for any advice.

    When the controller is first plugged in (via usb), a logic popup finds and asks if i want to use this device in logic.
    Logic is asking you if you want to use that audio device as Logic's audio driver.
    This is entirely independent of MIDI - any MIDI sent to OSX from whatever MIDI device will show up in Logic.
    Is there a way in Logic to turn off reading midi for certain devices. I dont want to shut down midi completely as I also use a midi keyboard which works without issues.
    Yes, you want to filter out the MIDI coming from that particular port. Open the environment window, go to the Click&Ports layer, and New -> Instrument, call it "Null" or something and make sure it's set to no output port in that object's inspector parameters.
    Now, cable the desired MIDI port on the "physical input" object that corresponds to your device, to this "Null" instrument. Now, all MIDI data coming into Logic on that port will be effectively nuked, and will not reach the rest of Logic and interfere with other things.
    Of course, you'll need to save this setup as a template or song in order to use it in the future.

  • Issues with External Sound Devices & others - 13" Late 2011

    Good day community,
    Out of curiosity, I run Diablo 3 on OS X and its been unplayable since ROS expansion, massive fps drops and crashes, Blizzard claims Apple stopped improving hd3000 drivers on 10.8.3, is this true? Also when I run the game through windows via bootcamp it performs better and doesn't not crash, is this related to hd3000 driver support still being improved in windows?
    Other issues I'm experiencing, facetime most of the time fails if I try to pickup a call from the macbook, sometimes it notifies me of the incoming call (iphone 5s) sometimes it doesn't. Bluetooth doesn't work, not even with apple devices, I can't pair any of them. External sound devices such as m-audio fast track pro, native instruments audio 8 dj, allen & heath xone 4d, they all have latency issues and sound clips and pops, even with the onboard sound I experience this if I open a couple graphic editing software while playing itunes. Checked sample rate in audio/midi setup, drivers, firmware, everything seems up to date, I'm not using a USB hub, I updated to Yosemite from Mavericks, which was a terrible upgrade from Mountain Lion and it completely lagged the computer, so when I upgraded to Yosemite I ran disk utility from boot and apparently repaired the hard drive successfully. Performance is better but none of the above issues were solved.
    So I'm thinking about formatting from scratch but wanted to drop a line here and see if others have any of these issues and/or some tips.
    Thank you for your time.
    OS X 10.10.1
    hd3000 (512mb)
    8gb ram
    i5

    Hi Lyndon4321,
    I know that can be frustrating when using an external display, but take a look at the article below to continue troubleshooting. I would take a look at Reset the system and work you way down. 
    Apple computers: Troubleshooting issues with video on internal or external displays
    https://support.apple.com/en-us/HT201177
    Take it easy,
    -Norm G.  

  • OfficeJet Pro 8600 Plus - Wireless connection issues with Wireless Extender

    I have a TPLink Wireless 300MBps wall plug extender to boost the wireless signal around my home.
    When in use my OfficeJet fails to connect to the wireless network at all, even if you 're-configure' the wireless as a new connection from the printer.
    Turn off the extender, reboot the printer, and voila - it connects within seconds.
    Any ideas as to what I can try?

    I think there are several things at play here.  The most suspicious is that the extender and the router are not the same brand.  There may be some protocol issues with this setup that the printer will never be happy with.
    Can you move your main router and forget the extender?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • 10.5 DHCP issues with Wireless - self assigned IPs?

    We're having an issue with Mac OSX 10.5.4 clients, running the latest software updates, not getting an IP address via DHCP on our wireless network.
    We're using Cisco APs, with multiple VLANs & SSIDs. They authenticate, but get automatic self-assigned IP addresses. None of our PC clients are experiencing this issue, nor older 10.4.x OSX clients. This looks like a bug, from what I was able to discover:
    http://forums.macrumors.com/showthread.php?t=384947
    Is Apple aware of this, and/or working on a fix? I've seen many issues over the last year or so with Airport clients and wireless connectivity..

    This is a "user to user" help forum that is designed as a self-help system, independent of Apple's Technical Support system. No one here can say what Apple knows or is doing about a specific issue (pure speculation is discouraged). We share experience and suggest possible solutions or workarounds.
    One way to ensure that your issue is brought to Apple's attention is to use their feedback form for OSX - http://www.apple.com/feedback/macosx.html
    Since the link you posted is from late last year, there have been many updates to Leopard. Some of the updates mention network reliability. Even though Apple has stated that the Pram chips don't control network connections, I have had some luck by Zapping The Pram - http://support.apple.com/kb/HT1379 - Remember to check your System Prefs for things like date/time settings after you Zap.

  • Issue with SPA 962 devices

    Hello everyone,
    we are facing the following issue with 6 Cisco SPA 962 devices. The phones are registered in a hosted PBX service (based on Vodia PBX). About 1 in 5 calls, whether incoming, outgoing or even between extensions have no audio at all. The phone of the called party rings (so the signaling is OK, even though the caller cannot hear the ringing tone while the phone of the called party is ringing) but when the call is answered, both parties hear nothing.
    The problem is caused by the phones, because I replaced one with a yealink device and the yealink worked without issues. I have spent a lots of time so far experimenting with various settings without success.
    Has anyone encountered a similar issue? Do you have any ideas or suggestions?
    Thank you very much in advance,
    John

    @jtsoukaris, I believe you have Cisco device. I am not sure if someone will be able to assist you here in Linksys Community. There might be other users in the community that has the same concern but I highly recommend that you contact Cisco about the issue.

  • How Verizon WIreless Deals With A Customer's Issues With A Flawed Device

    (link removed)
    Let me start at the beginning…
    I have had a bad history with phones during my 6 years I been with Verizon Wireless(VZW). All the phones I had with them always have some manufacturer issues. I either had to pay a deductible or was allowed to exchange it for free due to it still being under warranty.  I had to go through this 14 times in under 6 years. For the most part, Verizon Wireless has been very helpful with these issues & the amazing service they provided as kept me a very loyal customer. These qualities even lead me to sign up for Verizon FiOS over Comcast when I moved into my new apartment.
    On February 17th, 2014, I received my tax refund. Most of it was going to repairs for my car, but for a birthday gift to me, I wanted to upgrade my phone. At the time, VZW had a deal to trade in your old phone & upgrade to a new phone. Your trade in got $100 taken off the cost of your new phone. I thought that was a sweet deal since the phone I had, The Motorola Razr Maxx HD was my 4th replacement to replace my original phone from when I first upgrade my phone with a new contract 2 years ago, The Motorola Droid 3. The Razr Maxx HD was a good phone but not what I wanted, It did what it needed to do & the technology was steller. Just not my first choice in a phone.
    Since the Droid 3 was no longer in production, i always had to get a replacement phone VZW saw fit for me to get. Now with my contract up & my opportunity to get a new phone, I knew what I wanted   I wanted the Samsung Galaxy Note 3 now. It has so many amazing features, apps & it is the perfect phone for someone my size. I can easily text with it, I do not feel I will crush the phone holding on to it & all of the hardware in it is like nothing on the market at that time. I been researching the phone months before it came out & I knew once I had the money, this is the phone I wanted.
    So I went to the VZW Store ready to make the exchange and have a phone I wanted finally for once in nearly 2 years. I got there to be helped my a gentleman named Teddy. He was eager to help me. I told him why I was there & instantly got the ball rolling. My phone I wanted was in stock, I was able to get $100 from the trade-in promotion. HE also informed me I could get a free tablet by just paying the taxes for it, A mere $15 & The Note 3 was on sale. I could walk out this day with a new phone AND a tablet for $172! So I agreed to it & all I had to do was pay. Then the problems started…
    I was told I could not pay with my debit card. This was due to an issue of a returned payment. An issue I had with VZW due to their company in October 2013 in which they took 9 days to process my monthly bill payment to only return it when the funds was still available to complete it. So I had to leave the store to find an ATM to withdrawal the cash so I could purchase the phone & tablet. Once I came back, we tried to finish the sale. Now I was told I could not trade in my phone due to the fact VZW did not allow me to make debit payments because of their own error. I was told i could pay full price for the phone and I could not get the tablet. I declined & left the store.
    Very upset, I called VZW’s customer service line to formally complain. They could do nothing to help me since no one, not even a supervisor could fix these restrictions to my account. This made me more upset, so I went above their head & reported my situation to The Better Business Bureau(BBB). Within 7 days, a Manager From VZW’s Home Headquarters, named Brian (removed), finally called me to resolve my issues. HE apologized, removed my account restrictions & was sending me A Galaxy Note 3 for my troubles free of charge. I wanted the tablet too but did not care at this point. I just wanted a phone I wanted for once & I can do without a tablet. I never went out of my way to get one before & I was not planning to now.
    On February 25, I received my new phone. I instantly fell in love. The phone was the perfect size for me & it worked just like every review I read online said it would. Then on February 27th, the phone began to have charging issues. The factory charging cable that came the the phone began to have issues charging the phone, then not recognizing the charger at all. I called customer service to make a complaint. This is when I learned for the first time that The Samsung Galaxy Note 3 has a defect with it’s charging cable & charging the device. They told me I could either mail the cable for a replacement or try to get the replacement at a store. So I decided to go to the same VZW store to get the replacement.
    Once I got there, I had to wait in line for 30 minutes to finally speak to someone. Once I did, I was told they had no chargers in store. All that could be done was call Samsung & have a replacement phone sent to me. I asked what would I do for a charger until then & they said I could use the micro USB charger from my last phone to charge it.
    So I mailed the charger to Samsung, who said it would take 8-10 days to get my replacement. During this time, the phone began to now stop holding a long charge. So I again called customer service. I was again told to go to the VZW store to get a replacement charger. I went back to the store again to be told they could do nothing for me since I did not have to original charger. All I the could do was sell me a mobile charger for 50% off. Since i need my phone, I had no choice. I had to spend $30 now on a device to help my faulty one.
    March 6th, my replacement charger arrived. I was happy because now I can charge my phone with the proper charger & get a full battery life from it. That same day the charger had the same issues again. So i instantly took it to the Verizon Store to be told I need to call customer service for a replacement phone. So I return home to see in my mailbox is my VZW bill. The statement says my bill is $400! Verizon Wireless & Brian (removed) had charged me full price for my phone despite what he told me when he called me.
    I instantly called his office to only get his answering machine. I left a very angry yet respectful message explaining my disgust with what he & VZW have done since I got this phone. I said I refuse to pay anything until this issue is fully resolved. I then proceeded to file another complaint to The BBB. This time I would get no response from VZW. Instead i had to call and chat online with their customer service lines for over a month to have a REFURBISHED device, a replacement battery & a generic charging cable sent to me. My phone still has charging issues & I must travel around DAILY with my mobile charger to make it a whole day to be able to use my device.
    Verizon Wireless and Brian (removed) will not resolve this issue for me. Instead they have suspended services to my phone and are forcing me to pay the full price for the phone or having my service “permanently discontinued”.
    I am left with no choice but to pay this by next month. I need my phone for personal, business & emergency reasons just like everyone else. I can not pay this AND an early termination fee. Verizon Wireless has done nothing to help me & now I am stuck in a contract for the next 16 months with a company that has done this to me during the last 2+ months. I have a improper working phone and they get $400 for it and Brian (removed) gets his commission.
    Before I pay this bill, I am making one last complaint to The BBB & I am spreading my story across social media like wildfire, I am hoping someone at Verizon Wireless sees this. MAYBE they will do the right thing. Then again, they had the chance to & have not….
    Mr. Brian (removed) & Verizon Wireless,
    My Name IS Reginald (removed). Due to months of complaints you should very well know who I am. Since you will NOT help me, I have no choice but to play by your rules and pay you ridiculous cost for a phone despite the act of what I was verbally told. You & your company you work for have had countess times to make this right & you have not. I might have to be stuck in a situation like this, but the entire internet will now learn of your actions & how you treat people. Maybe this will teach you all how to properly treat your paying customers. Someone can still make this right. You have my number, but you would have to reactivate it to contact me though.
    Regards,
    Reginald (removed)
    Edited as required by the Verizon Wireless Terms of Service
    Message was edited by: Admin Moderator

        Reginald, We absolutely want to make this a better experience. Would it be possible for us to work together in direct message. Please follow us and we can get started.
    Sheritah_vzw
    Follow us on Twitter
    @VZWSupport

  • Can't add HP8600 on my desktop computer, but no issues with wireless devices

    Summary: How do I access my HP8600 that is connected wirelessly to a router from a computer that is connected to the router by ethernet cable?
    Description:  My HP8600 is in one room of my house.  It is connected wirelessly to a linksys EA6500 router.  I have no problem setting up  and than printing to any of the laptops or any device that connects wirelessly.  However, I have a desktop computer that is connected to the router by an ethernet cable.  How do I use the HP8600 as a printer for my desktop?  
    System Info:
    Printer: HP8600
    Router: Linksys EA6500
    Desktop Computer: Windows XP
    I thought I could just add the printer by putting in the static ip address when i try to add the printer and "Connect to this printer".... but it never finds that printer.  
    Any help is appreciated, thank you in advance.  
    This question was solved.
    View Solution.

    Hi,
    Looks like you want to connect something like the following image:
    Please check the following manual and set them up for your printer:
         http://h10032.www1.hp.com/ctg/Manual/c00389927.pdf
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Multiple issues with wireless after update to 10.8.3

    My wireless connectivity was never an issue until recently, probably after my update to 10.8.3.
    Now I see this...
    - After turning on my mbp, it can't see any wireless networks. If I go to network preferences and use the Network Name dropdown, I see all networks.
    - I can pick a network, but even if I ask ththe password be remembered, it will start me over next time around.
    - Once I enter the password, I can see the Wifi button going green in the left column network preferences window, *even as* it is still authenticating. The authentication fails eventually, but I am actually connected and I can start using the internet.
    I tried these... with no luck.
    - My wifi router has a 5GHz option. I used that one and set it to top of my preferrred network list.
    - I tried to create a unqiue Location in network preferences with just my wifi network in it.
    - I edited the left column in network preferences, to make sure Wifi is the first one to try before ethernet, bluetooth etc.
    I did also recently change my router to Belkin. But my other devices, Lenovo laptops, Ipads, iphones, etc. have no issues.
    What gives?

    Hey nikhilfromtx
    Check out the articles below for troubleshooting and to check to ensure that the router is using the recommended settings.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Driver issues with all apple devices

    I bought my pc with windows 8. I downloaded itunes and everything worked perfectly! I did a system reset which deleted itunes and without reinstalling itunes, i updated my computer to windows 8.1. I then tried installing itunes and everything seemed like it was working fine until I plugged in my ipod and my iphone. Windows cannot install the drivers that itunes gives it and it gives an "error code 1, this device is not congifured correctly". I know the devices are fine because they work on all others computers. When I plug in my devices, they do not charge at all and windows does not read them either as well as itunes. I have tried every troubleshooter which included uninstall itunes, applemobiledevice, bonjour, etc... And I manually searched my whole computer for itunes hidden files which I deleted. I manually selected the driver but clicking properties on my ipod and pressing "update driver". I called apple and spent an hour and 15 minutes talking with them and they could not fix the issue. They tried every thing they could find off apples website and troublshooters. We eventually came to the conclusion that it is a windows issue and that I should contact windows about this problem. I started talking to windows support and as soon as I said the "error code 1", he said that he could fix it... if I payed for there premium support!! **** that! I have now been trying everything and my last option after posting this is to do a full system restore which I definently do not want to do. Please help me!! BTW, none of helpers or troubleshooters from apples website fixed this! Such as checking for software conflicts and uninstalling in a specific order i have done it all! I appreciate anyone that responds! thank you!

    Great support here folks

  • Re: Issues with a Firewire device

    I have a Firewire device (M-Audio Firewire 410) audio interface that will crash my Win7 on Start-Up. If I shut down the computer with it connected, windows has trouble "closing" the program. So, I now log off - turn it off, and then log back in
    to shut down - which works 80% of the time. I was wondering if there was a way I could stably stop it via PowerShell without disabling the Firewire port. Obviously from how I have worded the question, I have a limited understanding the issue.
    Any suggestion would be appreciated.
    Jeremy

    The only legitimate recommendation we can make is that you need to fix the issue.  I recommend posing in the vendors forum for the PC or the device.
    Treating systems is always a bad idea in medicine and in computers.
    ¯\_(ツ)_/¯

Maybe you are looking for

  • Terminalserver Session Broker not reconnecting to existing session

    Hi! Following scenario: Terminalserver-Farm 2x RemoteDesktopServer (Windows Server 2008R2) 1x TS Session Broker (Windows Server 2008) A user connects to TS-Farm -> occasionally it happens that he is redirected to (for example) TS2, even if he has an

  • Logging in to SQL*Plus

    I've just installed Oracle 9i to Windows 2000 server. When I use SQL*Plus, it asked for a username and password. But when I installed Oracle 9i, it never asked me to create user. Then I tried logging in using windows 2000 username and it still did no

  • IMovie '11 will not display edited versions of photos from iphoto

    After editing some photos in iPhoto, iMovie displays in the preview window the edited photo, but once placed on the timeline, it reverts back to the unedited original version. Any ideas what's going on? Ultimately, after creating a slideshow of photo

  • Since using 'map' a black google menu bar is attached to FF headings

    On 2 occasions to-day I consulted Google map re housing in my neighbourhood. Hours later reactivating FF. I noticed that it's menu bar had gone. A black menu bar at the bottom had appeared showing +Y0u, Web Images, Maps, Translate, Gmail, More, Sign

  • Javaws part of JRE 5.0?

    I'm trying to re-create and old development environment for some legacy software and I needed JDK 1.5.0_22 but I also need Java Web Start. http://www.java.com/en/download/faq/java_webstart.xml claims that "Java Web Start is included in the Java Runti