Issue with Work status in SAP BPC 10.1 Unified Model

Hi Everyone,
I am are tying to setup work status functionality in SAP BPC 10.1 Unifed Model. But I am not getting any dimesions to select in the Owner dimension dropdown in the BPC Web Admin.
Is there any pre-requiste for setting up work status in Unified Model. Is there any document related to it? Any help would be greatly appriciated.
Thanks in advance!
Regards,
Ramanathan

Hi Ramanathan,
Had the same problem when I began using 10.1 Embedded.
In BW you need to identify which infobject will be used as the "Owner Dimension"  to control work status, access, etc.
To this infobject you must add an attribute to contain the string (userid in BPC) of the owner.  The name of the infobject can be anything.
I used 0ORGUNIT as the "Owner Dimension" control infobject and added attribue ZBPCOWNR.  I maintained ZBPCOWNR with the userid's.
This is the value to be entered into Owner Property:
HOWEVER, this will not be presented until the Owner Dimension contorlling infobject has a HIERARCHY!  The hierarchy must have at lease one leaf node.
Once I added the attribute, maintained the attribute, and added the hierarchy I was presented with my choices in the dropdown boxes.
Regards,
Andy

Similar Messages

  • [svn:osmf:] 14713: Fixed preloader issue with work around.

    Revision: 14713
    Revision: 14713
    Author:   [email protected]
    Date:     2010-03-11 12:44:27 -0800 (Thu, 11 Mar 2010)
    Log Message:
    Fixed preloader issue with work around.   Underlying flash player bug filed.  https://bugs.adobe.com/jira/browse/FP-4114
    Ticket Links:
        http://bugs.adobe.com/jira/browse/FP-4114
    Modified Paths:
        osmf/trunk/apps/samples/framework/ExamplePlayer/org/osmf/examples/AllExamples.as

    Thanks Very much for the reply.
    This issue came to development (we) through Support team only. Did you mean DB Team Support?.
    Also please let us know about the workaround suggested by DB Team.
    Thanks in advance.
    Joseph George

  • Hello, Im new to this website. Im having issues with my Macbook. I have the old 2009 model Macbook and it is our schools macbook. The school just upgraded these MacBooks to OSX Mavericks and when i try to open Minecraft it won't let me. It says no jd

    Hello, Im new to this website. Im having issues with my Macbook. I have the old 2009 model Macbook and it is our schools macbook. The school just upgraded these MacBooks to OSX Mavericks and when i try to open Minecraft it won't let me. It says no jdk installed. I also try to install Java SE runtime but half way through the Software Update it says cant download software because of network problem but I'm connected to the internet and i can browse stuff just fine. Can any one help with my problems. P.S. I don't know the administrator password or stuff like that. And yes we are allowed to play games and stuff on these laptops but only at home not at school so don't tell me i need to focus on school and not games. 

    Since you updated the operating system, it is probably Minecraft is missing certain files that ware remove or are not longer comparable with the new version of the OSX. what I recommend, is to check is there is an update for Minecraft and install that. If there is not update available, probably the best thing will be reinstalling Minecraft. Hope this will help you.   

  • Error while adding owner property in nw bpc 10.1 unified model

    Hi,
    currently we are working on NW BPC 10.1 unified model.
    while adding owner property in BW system for work status we are getting below error.
    "Characteristic owner is not mapped to any attributes in the SAP HANA model."
    Please suggest us where to add this owner property.
    Regards
    Anitha p.

    Hi Gregor,
    Thanks for your reply.
    we applied that note.
    We have few doubts while creating work status and BPF.
    Our dimension is /ERP/COSTCNTR, so we have added ZPERF and ZREV attributes in ZCOSTCNTR and we have implemented BADI BADI_RSBPCB_SETUSER (enhancement spot RSBPCB_SETUSER).
    My doubt is while creating ZCOSTCNTR infoobject do I need to take a copy of /ERP/COSTCNTR? I am getting short dump while doing this.
    Regards
    Anitha

  • Is there any alternative way to add Comments feature to BPC 10.1 Unified model?

    Dear All,
    I understand that BPC 10.1 Unified model does NOT support Comments. Is there any way we can add comments capability? Any help on this would be appreciated.
    I believe Comments are an important feature for both - Planning and Consolidation applications. There should be an alternative way to do this.
    Thanks.
    Regards,
    Peri

    What version of CUCM are you using? Have you considered the free Informacast version that you get with 9+?
    http://info.singlewire.com/singlewire-blog/bid/94815/Cisco-Announces-InformaCast-Basic-Paging-with-Cisco-Unified-Communications-Manager
    I think this is working as designed... using the 'auto answer' as an intercom is kind of a fudge.
    Aaron

  • Work status from the BPC for Excel interface

    Hello everyone !
    I got an issue on version 7.0M of BPC with WorkStatus. When i try to access to the work status from BPC the page won't load but i can access to it by the Web. Do you have any clue about that ? 
    It it the BPC server configuration ? The web site is with ASP2.0 is it an issue ?
    Best regards,
    Damien

    The problem seems to be related to how you configured the BPC application and web server.
    Just check table tblapsetinfo and tblserverinfo from database appserver to see if you have right configuration.
    I mean if you have the same name (FQDN or IP) for both application server and web server.
    Osoft virtual directory must work using .Net 1.1 no t2.0.
    Regards
    Sorin Radulescu

  • Issue with parallel operation of SAP NW SSO 2.0 and SNC Client Encryption (Logon Groups)

    Hi!
    One of our customers is using the SNC Client Encryption solution to ensure encryption using SNC (based on Kerberos Technology) for their SAP GUI Dialog connections. They have lots of SAP backends DEV, QAS, PRD all with the SNC Client Encryption SNC Lib installed. The profile parameter snc/identity/as contains the following value: p:CN=SAP/<ServiceAccount>@<DOMAIN>.
    Example: p:CN=SAP/[email protected]
    The customer is using one AD Service Account "SNCServiceUser" with one registered SPN "SAP/SNCServiceUser" for all systems (yes, this is not recommended... but the case).
    Important: All users use group entries in the SAP Logon (saplogin.ini). Means, for SAP logon the SNC name can not be manually configured on the SAP Front End. With group logons, the application server's SNC name is dynamically requested by the message server each time a SAP GUI connection is started. The SNC Name is greyed out in this case as dynamically obtained from the applications servers profile parameter snc/identity/as.
    Now our customer implements SAP NetWeaver Single Sign-On 2.0 within his landscape. Based on the Secure Login Server 2.0 (SP3) he likes to use X.509 based authentication to his AS ABAP backends using SAP GUI SNC while others still use SNC Client Encryption.
    Replacing the SNC Library on the AS ABAP
    The Secure Login Library 2.0 (SP3) has been installed on one of the ABAP systems and the SNC Client Encryption SNC Library (which is based on SSO 1.0) is no longer used, thus we changed the parameter snc/gssapi_lib to point to the new SNC library. We removed the old PSE.ZIP containing the keytab and created the new SAPSNCSKERB.PSE incl. the keytab and proper credentials. To ensure parallel operation, we kept the snc/identity/as value as is =  p:CN=SAP/[email protected].
    After restarting the system with initialized Secure Login Library 2.0, still the SNC client encryption works fine for existing users.
    The problem
    We created on the Secure Login Server an SNC certificate for the AS ABAP which has the following X.509 Distinguised Name Fomat: CN=SAP/[email protected] This is to avoid having to change the snc/identity/as to an "real" X.509 DN which would lead to non-working SNC Client Encryption for all the other users using SAP GUI and logon groups.
    As soon as we install the PSE via STRUST on the system the SNC Client Encryption solution stops working with error „Server refuses kerberos key exchange“.
    As part of an pilot implementation we have installed Secure Login Client 2.0 (SP3) on some test PCs. The test PC with SLC is able to perform Single Sign-On with SNC based on X.509 (incl. Encryption) to the ABAP system.
    Seems the SAP System now only tries to do X.509 based authentication thus key exchange fails. The problem is, we cannot change the snc/identity/as value because of the logon groups. If we were able to do so, we would in any case set the server identity to X.509 DN and in addition create the SAPSNCSKERB.PSE incl. keytab. This should work, as confirmed by SAP see this post.  
    Any ideas how to solve this and have both solutions in parallel?
    Appreciate any help.
    Regards,
    Carsten

    Hi all,
    we was able to fix the issue. It was an issue with the customers cluster configuration and the  $SECUDIR variable. This tricky issue leads to non working or sporadic working SNC Client Encryption...
    This was how the configuration looks before:
    Environment variable $SECUDIR is defined:
    "/ABCDEF<SID>/usr/sap/<SID>/DVEBMGSxx/sec“
    sapgenpse seclogin -l -v
    running seclogin with USER="<SID>adm"
    Credentials for username '<SID>adm':
    0 (LPS:OFF):
             (LPS:OFF): /ABCDEF<SID>/usr/sap/<SID>/DVEBMGSxx/sec/SAPSNCSKERB.pse
    1 (LPS:OFF):
             (LPS:OFF): /usr/sap/<SID>/DVEBMGSxx/sec/SAPSNCS.pse
    After changing the $SECUDIR to "/usr/sap/<SID>/DVEBMGSxx/sec“ and re-creating the credentials, it worked like a charm.
    As a result of this we can confirm, this configuration and SNC Client Encryption works with CommonCryptoLib in parallel to the SSO configuration.
    And Valerie was right with 2. SLC starting from V. 1.0 SP2 PL3 was able to convert the CN= part of the SNC Name into an SPN, was my mistake. In addition SNC Client Encryption starting from Version 1 SP1 PL1 does this also.. just to make this clear
    Thread closed hope this helps someone
    Carsten

  • Issue with Reports using costume measures - BPC 10.0 NW

    Hello BPC Colleagues,
    I’m having a problem with some BPC reports using costume measures and I would like to have your inputs about this issue.
    When all the reports are executed using a costume measures the report execution fails after a long time of execution (7min). The report has 1200 accounts and 57 company codes.
    In order to create trial balance we create these costume measure. Basically the measures are standars (with a few changes) and it works for limited reports (few account and companies) but we I try to executed for several accounts and companies I have the following error:
    “The execution of report Default Report failed. Please contact your administrator.”
    Error while communicating with the server
    Framework message:
    The underlying connection was close: An unexpected error occurred on a receive.
    Summary of the BPC LOG:
    |An error occurred while receiving the HTTP response to https://BPCENV.APPSET.MODEL. This could be due to the service endpoint binding not using the HTTP protocol. This could also be due to an HTTP request context being aborted by the server (possibly due to the service shutting down). See server logs for more details.#
    We already increased the PSAPTEMP table and this didn’t fix the issue. At the beginning we were sure that this was an issue with table space but the error persist.
    I don’t think (maybe I’m wrong) that this is not an issue related to the costume measure or to authorizations since I can retrieve data if I reduce the request to less accounts an company, so in my point of view this looks like a performance issue.
    Just for you, below you will find the details about our measure that generate the problem:
    'IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="INC",SUM(PERIODSTODATE([%TIME%].[%TIMEYEARLEVEL%], [%TIME%].CURRENTMEMBER), [MEASURES].[/CPMB/SDATA]),
    IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="EXP",SUM(PERIODSTODATE([%TIME%].[%TIMEYEARLEVEL%],[%TIME%].CURRENTMEMBER),[MEASURES].[/CPMB/SDATA]),
    IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="AST",([MEASURES].[/CPMB/SDATA],CLOSINGPERIOD([%TIME%].[%TIMEBASELEVEL%])),
    IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="LEQ",([MEASURES].[/CPMB/SDATA], CLOSINGPERIOD([%TIME%].[%TIMEBASELEVEL%])),[MEASURES].[/CPMB/SDATA]))))';SOLVE_ORDER=3
    Finally is important to mention that we are using BPC 10.0 NW (SP08)
    If you have any suggestion for me I will appreciate.
    Thanks you a lot!

    Hi Vadim,
    Once again, thanks for your help.
    We already modified the YTD standard measure but is with that measure that I have problem. Do you think that my new formula is not efficient and for that reason I’m having this problem? Is this correct?.
    Below you will find the standard and costume measure. In red I marked the difference between these 2 formulas:
    YEAR TO DATE CUSTOME MESURE:
    'IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="INC",SUM(PERIODSTODATE([%TIME%].[%TIMEYEARLEVEL%], [%TIME%].CURRENTMEMBER), [MEASURES].[/CPMB/SDATA]),
    IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="EXP",SUM(PERIODSTODATE([%TIME%].[%TIMEYEARLEVEL%],[%TIME%].CURRENTMEMBER),[MEASURES].[/CPMB/SDATA]),
    IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="AST",([MEASURES].[/CPMB/SDATA],CLOSINGPERIOD([%TIME%].[%TIMEBASELEVEL%])),
    IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="LEQ",([MEASURES].[/CPMB/SDATA], CLOSINGPERIOD([%TIME%].[%TIMEBASELEVEL%])),[MEASURES].[/CPMB/SDATA]))))';SOLVE_ORDER=3
    YEAR TO DATE STANDAR MEASURE:
    'IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="INC",SUM(PERIODSTODATE([%TIME%].[%TIMEYEARLEVEL%], [%TIME%].CURRENTMEMBER),-[MEASURES].[/CPMB/SDATA]),
    IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="EXP",SUM(PERIODSTODATE([%TIME%].[%TIMEYEARLEVEL%],[%TIME%].CURRENTMEMBER),[MEASURES].[/CPMB/SDATA]),
    IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="AST",([MEASURES].[/CPMB/SDATA], CLOSINGPERIOD([%TIME%].[%TIMEBASELEVEL%])),
    IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="LEQ",-([MEASURES].[/CPMB/SDATA], CLOSINGPERIOD([%TIME%].[%TIMEBASELEVEL%])),-[MEASURES].[/CPMB/SDATA]))))';SOLVE_ORDER=3
    If you have any suggestion to correct my formula I would really appreciate it.
    Regards,

  • Import with work status settings

    I've recently set up work status settings for an application where we import data using a xls file and the standard Import package.
    Even though I haven't locked any dimension members before, I get the following error message when importing data:
    Logic Error of LOAD AND PROCESSError
    Failed to commit transaction
    1 errors writing data
    Send through SendGovernor failed
    I've tried restarting SendGoverner - did not solve the problem.
    Any ideas on what might cause the error message?
    We are on BPC 7.0 MS SP7.

    Yes, I do use a transformation file and a conversion file.
    Results of my latest testing:
    1) Import file with 1 line, replace&clear and work status check selected - failed with this error message:
    ISLOCKED::System error.;
    The current members are locked::(ACTUAL, 2011.NOV, 1000)
    However checked the table and it is clear
    2) Import file with 1 line, merge and work status check selected - failed with the same error message as above.
    3) Import file with1 line, replace&clear selected - work status check off: success
    In which table would BPC maintain which dimension members are locked from a work status perspective? I haven't locked anything to date, perhaps it needs to be "initialized"?

  • Performance Issue with RF Scanners after SAP Enhancement Pack 5 Upgrade

    We are on component version SAP ECC 6.0, and recently upgraded to Enhancement Pack 5.  I believe we are on Net Weaver 7.10, and using RF scanners in one plant that is Warehouse Managed.  Evidentially when we moved to EHP5, the Web SAP Console went away and we are left with ITS Mobile.  This has created several issues and continues to be a performance barrier for the forklift drivers in the warehouse.  We see there is a high use of java script, and the processors canu2019t handle this.  When we login to tcode LM00, on a laptop or desktop computer, there are no performance issues.  When we login to tcode LM00, with the RF scanners, the system is very slow.  It might take 30 seconds to confirm one item on a WM Transfer Order.
    1.)     Can we revert back to Web SAP Console, after we have upgraded to EHP5?
    2.)     What is creating the performance issues with the RF Scanners now that we switched over to SAP ITS mobile?
    Our RF Scanners are made by Intermec, but I donu2019t think that is where the solution lies.  One person in our IT Operations has spent a good deal of time configuring SAPITS to get it to work, but still it isnu2019t performing.

    Tom,
    I am sorry I did not see this earlier.
    I'm currently working on a very similar project with ITS mobile and the problem is to accurately determine the root cause of the problem in the least amount of time. The tool that works is found here: http://www.connectrf.com/index.php/mcm/managed-diagnostics/
    Isolating the network from the application and the device is a time consuming process unless you have a piece of software that can trace the HTTP transaction between host and device on both wired and wireless side of the network. Once that is achieved (as with Connect's tool) you can then you can begin to solve the problem.
    What I found in my project is that the amount of data traffic generated by ITS mobile can be reduced drastically, which speeds the response time of the mobile devices, especially with large number of devices in distribution centers.
    Let me know if I can answer more questions related to this topic.
    Cheers,
    Shari

  • Issue with Work Items for a User

    HI All,
    I have an issue with workflow.
    One of my user stopped receiving work items in his inbox. I checked table SWWUSERWI and found 0 entries for the user. So i guess there is no problem with the display setting in SBWP.
    What could be the probable reason and where can i find if those workitems that are generated for him that he has not received.
    Regards,
    Rohit

    There can be many many reasons. You need to understand the workflow and work with an example (an item the user says they should have received). Then try to follow the agent determination logic based on the data contained in that example and verify that everything matches up.

  • Issue with special characters in SAP CRM ICSS application.

    Hi ,
    I have issue with the special character in CRM web application.
    1. In CRM IC Webclient application(5.0) . i am copying and pasting some special characters in the description of the service request document. then this is saving the character as it is.
    But when i am opening the same service request in SAP CRM  ICSS(Internet Customer Self-Service) application, then the special characters are converting to different characters.
    I am not sure whether this is the right forum for this or not.
    Can anyone please suggest how can i correct this. Or is there any standard solution to handle the special characters in ICSS.
    Thanks
    Sudhansu

    misunderstood =/
    Original (Coming - output):  "<PAY_TXT>PAYκ Contact your bank or financial institution to make this payment from your cheque, savings, debit or transaction account.</PAY_TXT>"
    it's in output but what is data in database ?
    sorry but without knowing about source data for forming the xml i haven't ideas about your problem
    in db it's "TM " or "™" or ... ?
    Original (Coming - output):  "<PAY_TXT>PAYκ Contact your bank or financial institution to make this payment from your cheque, savings, debit or transaction account.</PAY_TXT>"
    Something like XAE or "K" after PAY Value in the xml tag and continued the text value.  (Tag value is not getting copied exactly here - i am sorry for that )
    that's ok. i need to see the problem not the data as is
    Expected (output):  "Here it needs to produce the "PAY TM" (Here "TM" should be super scripted to "PAY" Value in tag).
    as super scripted in xml?
    as idea - you can have <PAY_TXT>PAY TM</PAY_TXT> and in publisher set TM as super
    Designing XSL Subtemplates - 11g Release 1 (11.1.1)

  • Issues with BEx Reports in SAP Enterprise Portal

    Hello Experts,
    I am facing issues with BEx reports integrated in portal. Below are more details:
    Scenario 1:
    Execute a BEx report in the portal, save it in 'My Portfolio' using 'Save As' button. Now open the saved report from 'My Portfolio'. Below is the issue for this scenario:
    When I open the saved report, I get 2 error messages and 1 info message at the top of the report. They are as follows:
    The metadata of 'ITE' 'TEMPLATE_PARAMETERS' are incorrect for parameter 'COMMAND_PROCESSING'
    The metadata of 'ITE' 'FILTER_PANE_ITEM' are incorrect for parameter 'TEXT_WRAPPING'
    Variables for characteristic Fiscal year/period[0FISCPER] cannot be processed
    Scenario 2:
    Execute a BEx report in the portal, save it in 'BEx Portfolio' or 'Favourites' using 'Save As' button. Now open the saved report and click on 'Send' button. As expected, the BEx broadcaster wizard should appear but, it shows '400 BAD HTTP REQUEST'. While if I open the report (not the saved one) and click on 'Send' button, it works.
    Helpful pointers appreciated.
    Thanks
    Vikash

    HI Suman,
    I am not adding the report to favourite using browser favourite. Below is the flow:
    Run the report in portal.
    There is a 'Save As' button at the top of the report. When I click that button, I get a pop-up with 3 tabs  for saving the report.:
    Favourite
    BEx Portfolio
    My Portfolio
    save the report in the favorites or BEx portfolio tab and then open it and press 'Send' button
    BEx Broadcaster Wizard should appear but instead of that, it shows '400 BAD HTTP REQUEST'.
    If I press send for unsaved report, then BEx broadcaster Wizard is shown.
    Thanks,
    Vikash

  • Installation of  SAP BPC 10.1 Unified on top of HANA in Amazon Cloud

    Hi Experts,
    I need to install SAP BPC 10.1 Uified on top of HANA in amazon Cloud. Could you please give me Complete guidelines for pre and post steps.What are HANA ONE supported OS flat-form in could.please help me for this
    Thanks
    J Jana

    Hi Andy,
    Thank you for your support.
    Note : My SAP system is AWS free server of AS ABAP 7.4 SP5 incl. BW on SAP HANA SP7,it will get BPC 10.1 unified version by default or not.if it will get how i will access.
    We have done chapter 2 and 3 every thing in installation guide, but EPM add-on didn't installed.
    IN SICF that services i didn't find out.is there any other post steps for getting this services.so please help me.
    Thanks
    J Jana

  • BPC 10.1 Unified Model - Is it a must to have BEx query to create an input form/report?

    Dear All,
    Have a cube(Unified) created in BW 7.4.
    To create an input form using that cube(unified), Is it mandatory that I need a BEx query for the input form/report?
    i.e. To create an input form/report in BPC 10.1 Unified environment using a Unified model, is it a MUST to have a BEx query in place? Or, can I create an input form using 10.1 Unified model without BEx query using 10.1 Unified model?
    Thank you!
    Regards,
    Peri

    Hi Peri,
    It doesn't matter what you include in the rows and what in columns or free characteristics: think of it as a sub-cube of the original cube. You are basically listing Dimensions you need in a group of you reports and can add new measures.
    In BPC report you'll arrange them on the screen, format, protect, etc.
    So, some of it is a repeat (not all tho), but for different purposes.
    Hope this helps,
    Gersh

Maybe you are looking for