Issue with Workbook Broadcasting

Hi Guys,
I am trying to broadcast one workbook.
I am able to send it through mail.
But when I am opening the mail attachment the workbook is not showing any value,only the message
"There are variables,change variable values" is coming.We are on support pack 18 BI7.
Please help me on this.
Sunita

Hi Sunita,
Since you say you are on SP 18 for 7.0 this error should normally not occur any more, can you check
that the manual parts of following notes have been implemented complety in your system:
Notes 1074272, 1072913 and 1082617
If the problem still exists please make sure that you have the latest patch for the BI FrontEnd & Precalculation Server
installed on your system.
Best Regards,
Des

Similar Messages

Issue with Information broadcasting and pre-cal server in SAP BI

Hi Experts,
I have issue with information Broadcasting and Pre-cal server. I have a worrkbook whcih runs from information broadcasting in pre-cal server. Workbook is desinged on single query and workbook contains visual basic code. workbook has a variable which is controlled by Control query in information broadcasting.
I have 20 employees every month I need to send workbook via e-mail from information broadcasting. The problem is sometimes all 20 employees will recieve e-mails and sometimes not. I identified there is something wrong in workbook or in pre-cal server.
because after workbook calculation in pre-cal server is not pushing to SOST so there is something wrong in workbook or in pre-cal server.
I closely observed pre-cal server front end log. There are few operations performing on workbook in pre-cal server
like Open workbook, Calculate workbook, Save woorkbook and close workbook. In success case pre-cal sever is performing all the operations but in failure case pre-cal server is missing Close workbook case.
Below log In pulled from pre-cal server
Can you please tell what could be the problem.
Successful job
3/11/2011 9:29:46 AM (3) -> RS_PREC_LAUNCH_EXCEL i nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
2PCUG9ZPPP'. nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
3/11/2011 9:29:46 AM (3) -> InitConnection in thre ad 3
3/11/2011 9:29:46 AM (3) -> Trying to open "C:\Pro gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
xla" gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:30:35 AM (3) -> Using Version 7100.4.1 200.35 of BExAnalyzer.xla
3/11/2011 9:30:35 AM (3) -> PID of Excel process: "2504"
3/11/2011 9:30:35 AM (3) -> EndOfInitConnection in thread 3
3/11/2011 9:30:35 AM (3) -> RS_PREC_LAUNCH_EXCEL f inished
3/11/2011 9:30:36 AM (0) -> Calculation Request 91 1A35ED029D4D79DD7A000200000000 received for job 'B
IBCAST4L4EIS7TOR5BWG02PCUG9ZPPP'. 1A35ED029D4D79DD7A000200000000 received for job 'B
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:31:22 AM (0) -> Opening workbook: C:\W INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
DVLYAPC2SYIC7F1AAIO_0.xls INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
3/11/2011 9:31:43 AM (0) -> Refresh BExAnalyzer.xl a!MenuRefreshPrecalc returned with 1.
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls saved. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls closed. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:44 AM (0) -> Excel based operations finished.
Failure job
3/10/2011 10:22:58 AM (1) -> RS_PREC_LAUNCH_EXCEL invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
TGJR0462ZFX'. invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
3/10/2011 10:22:58 AM (1) -> InitConnection in thr ead 1
3/10/2011 10:22:58 AM (1) -> Trying to open "C:\Pr ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
.xla" ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:23:44 AM (1) -> Using Version 7100.4. 1200.35 of BExAnalyzer.xla
3/10/2011 10:23:44 AM (1) -> PID of Excel process: "2544"
3/10/2011 10:23:44 AM (1) -> EndOfInitConnection i n thread 1
3/10/2011 10:23:44 AM (1) -> RS_PREC_LAUNCH_EXCEL finished
3/10/2011 10:23:44 AM (5) -> Calculation Request 9 11A35ED02654D789871000900000000 received for job '
BIBCAST4L41566ZBZDN2NTGJR0462ZFX'. 11A35ED02654D789871000900000000 received for job '
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:24:31 AM (5) -> Opening workbook: C:\ WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
A8O8D8FBHYCR4HVB5UI8_0.xls WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
3/10/2011 10:24:52 AM (5) -> Refresh BExAnalyzer.x la!MenuRefreshPrecalc returned with 1.
3/10/2011 10:24:52 AM (5) -> Calculated workbook C :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
2VEA8O8D8FBHYCR4HVB5UI8_0.xls saved. :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
Thanks in advance
Narendra

Hi Ravikanth,
Thank you very much for the reply
I went into RSPRECADMIN and clicked on 'Display Current Queue'. There we have 3 sections
1) Queue Overview of Open Precalculations
I can see this section is always blank after running IB also
2) Queue Overview of Current Precalculations
In this section I can see an entry after running IB and duration is changing. but some time workbook in this section will never processed but the duration column is changing may be something is happening at this stage.
If the entry is not proccessed in this section and IB SM37 job will never end. I manually cancelled the job from SM50.
Don't why the workbook is taking long time and will never end even though I cancelled the SM37 IB job.
3) Queue Overview of Proccessed Error-Free Precalculations
All the error free workbooks which means all pre-cal server completed workbook calculation and sent to SOST.
I manually ran the workbook for all the 20 employees I can't find any pop-up message (earlier we have pop-up windows appearing because of VB code and when report returns no data and we fixed the pop-up issues)
Can you please help me further to trace the error.
Thank you
Narendra

Security Issues with workbook

Hello All,
When I log into discoverer with some responsiblity "a" i am able to see the output of the particular workbook.
But when the same work book ran by other user with differnet responsbility "b" and with with same parameters , he is geting the message as "'The query caused no data to be returned" .
There seems to be some security issues. Can any one kindly explain the process why the user is not able to view the output. In order to overcome this what are the actions i need to do.
Thanks for your support.
Best Regards,
Kumar.

Hi,
I assume that you are using Oracle Applications and that the user is connecting with a different apps responsibility.
In Discoverer, security can be applied at 4 levels; in the workbook, in the EUL, in views and using VPD. Application 11i security is mostly applied through views.
Now, the security applied depends on the Apps module. GL, AP/AR, PO and FA all have different mechanisms for applying security. Mostly the security applied will be determined by security profiles set up for the responsibilities. But for example, GL, also uses row based (procedural) security based on the flexfield security rules in some of the GL views. If you are using a custom responsibility you will need to ensure that all the security profiles are set up for this responsibility.
So your first step is to look at what view(s) are used in the report. Then determine which security profiles are checked by this view. So if it is a GL view you need to check the 'GL Set of Books Name' profile is defined for that responsibility.
Without knowing which modules you are using, which version of Oracle Applications or whether you have custom or seeded responsibilities it is difficult to know why your report does not return data for the responsibility.
Rod West

Issue with Information Broadcasting...urgent

I try to dispatch a query through Information Broadcasting with the Distribution type chosen as "send as e-mail" and output format as HTML.
I am receiving the mail with three attachments,
1.0QUERY_TEMPLATE_BROADCASTING_00001.htm.HTM
2.BWReports_ie5.css.CSS
3.pixel.gif.GIF
Upon saving all the files in a folder and opening the HTML,it appears without the stylesheet properties and the images.
My requirement is I need to get the report embedded in my mail.Any clue how to acheive this and should I change any settings.Also any idea as to why the images are not displayed in the HTML.Any kind of help will be appreciated as it is very urgent.
Thanks,
Akhila.

In the Broadcast setting, output format select <b>Independent HTML file</b> and you will receive only one file.
I guess your current setting is set to <b>HTML with seperate MIME</b> files.

Having issues with workbook and sharing

Ive used excel for my scheduling for over 10 years or so and sharing it so everyone in the office has access. Since we switched to the new office, now it changes the fonts, colors, size every time you open it. Tied to set a default them but
didnt work, its driving me nuts having to change 100 cells or lines every time i open it. Any ideas? Thank you!

Hi,
Do you mind telling us what is the previous and new version of Office? From Excel 2003 upgrade to Excel 2007 or later version?
If it is, the issue may be caused by the file format, we should make sure that the workbook is being saved in native Excel 2007/2010 format. If you are saving it in the older Excel 97-2003 format, then it is possible that the losses you are seeing are
due to the formatting not being supported in the older format.
Then, we may try the workaround: Transfer your data from the current workbook to a new workbook and then see if the problem occurs in the new one.
http://excelribbon.tips.net/T009484_Losing_Formatting.html
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Issue with workbook template

Dear friends,
I would like to create an excel workbook template having two tabs on it. Sheet-1 for result area and Sheet-2 to show navigational attributes and text elements. Is this feasible? If feasible, can anyone of you guide me on it?.
I created a template like this but when we attach a different query (which is not used for formatting)to this template, all data (result area and text elements) shows on the same sheet (sheet 1). I guess, am doing some mistake here while creating the template. If question is not clear, let me know.
Thanks
Viswa

Thanks Elena,
I did the same thing and stored it as template. However, if I use this as template when I run for query, the alignment is not proper. Some columns/rows are exists from the results of template query.
Could you help me?. Do I need to write any Excel macro?.
Thanks
Viswa

BEx workbooks - Issue with FIND in BEx

Hi All,
We have an issue with workbooks.
When user tries to FIND with * in BEx in BW production he is able to see other's workbooks.
How do we restrict the Find or disable the FIND in BEx for workbooks.
Thanks & Regards,
Sai

Hi Sai,
It is not possible to restrict this workbook search...or disable it...
your user should however only have access to the workbooks that your have assigned to him via the roles mechanism. It is via
this roles mechanism that you can prevent a user from accessing other users workbooks.
regards
Orla.

Issue with Broadcasting and Publish query to Portal from query Designer

Dear all,
I have created a standard template ZWT_STANDARD_TEMPLATE in WAD and I have added this for Adhoc Analysis in 'Set Standard Web templated' RSCUSTV27.
For Broadcasting I have added 0BROADCASTING_TEMPLATE70.
I have problems with my broadcasting as well as publishing the Query in Portal.
When I use a Broadcast to Email - it opens a new window with my standard template(ZWT_STANDARD_TEMPLATE ) I have added. No data though.
Same thing happens for publishing too...When I publish the query to portal from Query Designer or WAD it takes me to the same window with my standard web template. No data though.
I think both are related to the same issue. Its with broadcasting.
What is the default template for Broadcasting in NW2004s? Below is the url I have included when I do it from Query designer. Its actually starting the Command - START_BROADCASTER70 but I dont know if it has to do a SOURCE_QUERY=ZCOPA_C03_FAST_PAYABLES. Could anyone compare it with your urls
http://pgdep00:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex3x?system=SAP_BW&CMD=START_BROADCASTER70&SOURCE_QUERY=ZCOPA_C03_FAST_PAYABLES&START_WIZARD=X&DISTRIBUTION_TYPE=PCD_EXPORT
This is the url for publishing from WAD
http://fndef00:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex3x?system=SAP_BW&CMD=START_BROADCASTER70&SOURCE_TEMPLATE=ZWT_FAST_PAYABLES&START_WIZARD=X&DISTRIBUTION_TYPE=PCD_EXPORT
Any help would be highly appreciated.
Thanks,
KK

Hi KK,
Did you solve your problem, i am also having the same issue. Please let me know if you have solved this issue.
Thanks,
Kumar

Broadcast and non-broadcast SSID issues with iPhones and iPads

We have a CIsco wireless infrastructure configured with a public broadcasted ssid and a private non-broadcast ssid that we are experiencing issues with the iPads and iPhones. The iPad or iPhone will switch between both ssids if defined but keep the original IP address when it switches to the non-broadcast ssid making it unusable. It shouldn't be switching at all technically. If the non-broadcast ssid is defined only on the iPhone or iPad, the broadcast ssid pops up and starts asking for authentication information. I have Cisco looking into this but I'm quite sure this is an Apple bug. Any other device works fine. We are currently using version 4.3.5(8L2) on the iPads and iPhones. I do know that if we broadcast both SSIDS, the issue goes away, but I don't want to do that. Although it doesn't really add any more security, it just isn't advertised, so most people won't see it and avoids a lot of questions. Hopefully there's a simple solution.
Any ideas apple guys?
Also how does one open an actual trouble ticket with apple?

Did you solve this? Settings\Wifi\Askto join networks - OFF

Performance Issue with Broadcaster

Hi,
I am facing a performance issue with Broadcaster.
We use the broadcasting program in the Process Chain, and the program takes time to execute.
It is not performance with data . The query executes fastly without taking much time.
What can be the reason? How can we reduce the time taken for the broadcasting?
Thanks in advance
Regards,
tinkugeo

Then you must have a 4S without realizing it. In any case Apple does not support downgrading. Once on 8 you cannot go back. Try resetting the phone. Hold on the power and home buttons at the same time until the Apple logo appears.

Variable Assignment : Workbook broadcast

Hi gurus,
We have been broadcasting 31 Inventory workbooks on a weekly basis for the past couple of months. The workbook is based on 1 inventory query which has a Cal Month and Store Location as mandatory variables. Obviously, while broadcasting the same, we should be able to set these variables in the Variable Assignment of the Workbook Precalculation Tab.
Earlier I was able to see them in the variable assignment assignment for this workbook. We havn't changed the query, no changes in the system, No changes at all. But now I am not able to see a single variable in the variable assignment except for this variable that says Tech.Cont.: Time Frame for which Data is Selected.
I am not sure where can I see the variants for this workbook. Anyways, we havn't mentioned any variants in the workbook precalculation tab. Please help me with this issue.
I executed the query and tried broadcasting the corresponding query, Here I am able to see the variable assignment. But not for the corresponding workbook. Creating all the settings right from the scratch for changing from workbook broadcast to query result broadcast would be a very tedious task which I don't want to undertake right now.
Can anyone please help me with this problem.
Thanks & rgds,
Sree

Hi Murali,
Thanks for your answer and sorry wasn't able to respond early.
As I had mentioned, this problem didn't exist earlier. However, all of a sudden, we have started to face this issue. Global variants were never created because we are not using the option of VARIANTS, instead we use Variable Assignments. This has been the practice for the past many months, but all of sudden since last month, we started having this strange issue where we could'nt determine the variable assignment.
When know I click on the variable assignment create link, there is only one variable that appears in the screen "Tech.Cont.: Time Frame for which Data is Selected", I donot see any other variables. Earlier though, i was able to see all the other variables (Plant, division, etc).
Please let me know if you have any answer for this issue.
Thnks & rgds,
Sree

Issues with WebForm performance

Hi,
We had migrated a new application from UAT to PROD and we encounter webform performance issues with the following actions..
After login, the first form you open it is
always slow. After this you can switch from one form to another without a
delay.
Then once you change any data – the next time
you access a form it gets delayed.
The point to be noted is, it doesnt have any performance issues in the UAT environment and the configuration settings,essbase cache settings are all the same. We did try to move the EPM system to a new server to see if this is a hardware issue but no luck, the performance issues still exist. The consumption of the CPU/memory has been checked and it is proved that the form opening delay has nothing to do with lack of memory.
The JVM head settings is set up at 4GB which is infact higher than that of the UAT environment(2GB).
runs on Windows server2008,11.1.2.1.600 EPM serve, has planning,reporting,foundation on one server (32GB ram) and essbase on another server (32GB ram). Any help is appreciated.
Please find attached the planning logs below and there is nothing mentioned in the hyperionplanning error logs.-----------------------------------------------------------------------------------------------------------------------------------------------------------------
<Nov 5, 2013 8:05:43 PM CET> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Nov 5, 2013 8:05:43 PM CET> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Nov 5, 2013 8:05:44 PM CET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
<Nov 5, 2013 8:05:46 PM CET> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 >
<Nov 5, 2013 8:05:48 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Nov 5, 2013 8:05:48 PM CET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Nov 5, 2013 8:05:48 PM CET> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\logs\Planning0.log is opened. All server side log events will be written to this file.>
<Nov 5, 2013 8:06:22 PM CET> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Nov 5, 2013 8:06:28 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Nov 5, 2013 8:06:28 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Calling getDomainConfiguration()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Calling getRuntimeService()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
return com.bea:Name=EPMSystem,Type=Domain
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Domain location is 'C:\Oracle\Middleware\user_projects\domains\EPMSystem'
Calling getRuntimeService()
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Checking C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\registry_update.xml file
EPM_ORACLE_HOME: C:\Oracle\Middleware\EPMSystem11R1
Template for PLANNING#11.1.2.0: C:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_planning_11.1.2.1.jar
Dependencies for C:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_planning_11.1.2.1.jar: []
BPMUI shared webapp not referenced from PLANNING#11.1.2.0
Application name: PLANNING#11.1.2.0
Application source: HyperionPlanning.ear
Server name: Planning0
Server port: 8300
Server SSL port: 8343
Application context: HyperionPlanning
Registry product type: PLANNING_PRODUCT
Registry physical web application type: PLANNING_WEBAPP
weblogic.Name property is 'Planning0', seems to be WebLogic mode
registry.isRegistryDatabaseCreated()true
Registry was initialized sucessfully
Executing pre custom update for PLANNING#11.1.2.0
EPM_ORACLE_INSTANCE: C:\Oracle\Middleware\user_projects\epmsystem1
Physical Web App found
Web app already linked to some application server: false
The registry was not modifyed because it already containse all sturctures
Web app is already linked to the logical web app
No needs to run custom updater for PLANNING#11.1.2.0
loggingUpdatePLANNING.block file exist or the system is running in the Fusion mode, skipping logging.xml configuration
Planning locale: en_US
<Nov 5, 2013 8:06:39 PM CET> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Nov 5, 2013 8:06:39 PM CET> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
<Nov 5, 2013 8:06:39 PM CET> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of Planning.>
<Nov 5, 2013 8:07:09 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Nov 5, 2013 8:07:09 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Nov 5, 2013 8:07:09 PM CET> <Notice> <Cluster> <BEA-000162> <Starting "async" replication service with remote cluster address "null">
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\Middleware\jrockit_160_20\jre\lib\security\cacerts.>
<Nov 5, 2013 8:07:10 PM CET> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
Version: V3
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 512 bits
modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
public exponent: 65537
Validity: [From: Thu Mar 21 21:12:27 CET 2002,
               To: Tue Mar 22 21:12:27 CET 2022]
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
SerialNumber: [    33f10648 fcde0deb 4199921f d64537f4]
Certificate Extensions: 1
[1]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Algorithm: [MD5withRSA]
Signature:
0000: 9D 26 4C 29 C8 91 C3 A7   06 C3 24 6F AE B4 F8 82 .&L)......$o....
0010: 80 4D AA CB 7C 79 46 84   81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
0020: E9 B7 D9 7C E2 23 33 A4   B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
0030: CB 21 20 88 81 21 DB AC   90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on 127.0.0.1:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on fe80:0:0:0:0:5efe:a53:4816:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[4]" is now listening on 0:0:0:0:0:0:0:1:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.83.72.22:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on 127.0.0.1:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on 0:0:0:0:0:0:0:1:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:0:ffff:ffff:fffe:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on fe80:0:0:0:0:5efe:a53:4816:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on fe80:0:0:0:0:ffff:ffff:fffe:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.83.72.22:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Nov 5, 2013 8:07:10 PM CET> <Warning> <Server> <BEA-002611> <Hostname "WIPLPRD01.svc.unicc.org", maps to multiple IP addresses: 10.83.72.22, 0:0:0:0:0:0:0:1>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "Planning0" for domain "EPMSystem" running in Production Mode>
<Nov 5, 2013 8:07:12 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Nov 5, 2013 8:07:12 PM CET> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
using java.library.path: C:\Oracle\Middleware\EPMSystem11R1/products/Planning/lib64;C:\Oracle\Middleware\EPMSystem11R1/bin;C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseRTC-64/11.1.2.0/bin;C:\Oracle\MIDDLE~1\patch_wls1034\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\x64;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JROCKI~1\jre\bin;C:\Oracle\MIDDLE~1\JROCKI~1\bin;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\x64\oci920_8
EPM_ORACLE_HOME (C:\Oracle\Middleware\EPMSystem11R1) is set from JVM property "EPM_ORACLE_HOME".
using Java property for Hyperion Home C:\Oracle\Middleware\EPMSystem11R1
EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
Reaquired task list lease: Tue Nov 05 20:11:49 CET 2013: 1383678709156
Seeking ESAPI.properties
Found in 'org.owasp.esapi.resources' directory: C:\Oracle\Middleware\EPMSystem11R1\products\Planning\config\esapi\ESAPI.properties
Loaded 'ESAPI.properties' properties file
Seeking validation.properties
Found in 'org.owasp.esapi.resources' directory: C:\Oracle\Middleware\EPMSystem11R1\products\Planning\config\esapi\validation.properties
Loaded 'validation.properties' properties file
Seeking antisamy-esapi.xml
Found in 'org.owasp.esapi.resources' directory: C:\Oracle\Middleware\EPMSystem11R1\products\Planning\config\esapi\antisamy-esapi.xml
EnterData_Inner Processing Time:424
2013-11-05 20:14:47,454 INFO Thread-51 calcmgr.launch - Date/Time Started: 2013/11/05:20:14:47.452 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Wrk_Scenario:"Work_Plan_2014"[Variable] Funds:"Regular"[Variable] Units:"0001"
- Date/Time Started: 2013/11/05:20:14:47.452 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Wrk_Scenario:"Work_Plan_2014"[Variable] Funds:"Regular"[Variable] Units:"0001"
2013-11-05 20:14:54,066 INFO Thread-51 calcmgr.launch - Date/Time Ended: 2013/11/05:20:14:54.066 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin.
- Date/Time Ended: 2013/11/05:20:14:54.066 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin.
EnterData_Inner Processing Time:64
EnterData_Inner Processing Time:15
EnterData_Inner Processing Time:359
EnterData_Inner Processing Time:2
EnterData_Inner Processing Time:53
EnterData_Inner Processing Time:4
EnterData_Inner Processing Time:7
EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
Setting HBR Mode to: 2
In lookupBRLWA()
Found HBR product = ESSBASE_PRODUCT
Found HBR product = ESSBASE_PRODUCT
Found HBR product = ESSBASE_PRODUCT
HBR LWA Component = Default
Default HBR = http://WIPLPRD01.svc.unicc.org:19000/eas
In getDBDetails()
Found HBR product = ESSBASE_PRODUCT
In lookupBRLWA()
Found HBR product = ESSBASE_PRODUCT
Found HBR product = ESSBASE_PRODUCT
=2013-11-05 20:35:08,234 WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.security.HbrSecurityAPI - Error retrieving user by identity
- Error retrieving user by identity
Embedded HBR initialized.
EnterData_Inner Processing Time:6
EnterData_Inner Processing Time:867
[Tue Nov 05 20:35:33 CET 2013] Planning successfully notified HBR repository.
EnterData_Inner Processing Time:7
2013-11-05 20:40:38,613 INFO Thread-67 calcmgr.launch - Date/Time Started: 2013/11/05:20:40:38.606 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Funds:"Regular"[Variable] Units:"0001"[Variable] Wrk_Scenario:"Work_Plan_2014"
- Date/Time Started: 2013/11/05:20:40:38.606 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Funds:"Regular"[Variable] Units:"0001"[Variable] Wrk_Scenario:"Work_Plan_2014"
2013-11-05 20:40:47,241 INFO Thread-67 calcmgr.launch - Date/Time Ended: 2013/11/05:20:40:47.241 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin.
- Date/Time Ended: 2013/11/05:20:40:47.241 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin.
EnterData_Inner Processing Time:44
EnterData_Inner Processing Time:2
EnterData_Inner Processing Time:525
EnterData_Inner Processing Time:1
Reaquired task list lease: Tue Nov 05 20:41:49 CET 2013: 1383680509246

I already replied there but it seems no moderator is willing to approve my reply so it never shows up.
So I'll try replying in here instead:
I never thought it could be an emulator issue, I thought I had done something wrong to begin with. So I take having performance issues with tiled layer is not a common problem I suppose?
I'm using MOTODEV SDK platform, A1200 model (motorola).

Issue with Analysis Office Add in

Hi,
User are having an issue with Analysis Office and giving the error.
From Analysis Office-> Open workbook->after Login to AO using BW connection
After opened the report ->when refresh the report, getting the error
"An Exception occurred in one of the data sources. SAP BI Add in has disconnected
Nested Exception. See inner exception below for more details
Initial RANGE-LOW for customer exit variable ****_EXIT_001 corrected ..
Under details
An exception has occurred in one of the data sources.
SAP BI Add-in has disconnected all data sources.(ID-111007)
We are using BO AO for MS Office Add-in 1.4 SP3 in BO server.
Please let me know the reason for this error and how to fix this.
Thanks in advance.
Jayakrishna

Hi Krishna,
Thanks for the reply. The Sales office field is directly mapped in the transformation and does not have any routine. Its the Key field.
The Billing Document Condition infocube is being feed by the DSO '2LIS_13_VDKON - Billing Document Condn' and datasource is '2LIS_13_VDKON'.
The Open Orders infocube is being feed by the DSO Document Order item / Delivery; below which we have another 3 DSO.
1st DSO has the Datasource '2LIS_13_VDITM'
2nd DSO has the Datasource '2LIS_11_VAITM'
3rd DSO has the Datasource '2LIS_11_V_SSL'
The Sales Office 7 has txn records for the month of April & May.
The report built on top of a Multiprovider and the for the months June and July, we have txn records fine for the sales office 01 - 06.
Please help me, if i am missing anything here and make me to understand better.

Issues with cisco 1242 aironets

We are currently experiencing and issue with the 1242 AG Wireless Access Points. We have have them configured as 1 Root Access point and 3 Repeaters. The repeaters seem to be experiencing frequency interference issues. The Root AP is using antenna model 2506 and the repeaters 1728's.
What happens is when the repeaters are first started up, they see / communicate to the root access point fine, but within 5 minutes they stop communicating. If we manually set the channel to something different, they see each other for 5 - 10 minutes then eventually disappear and cannot be ping'd or seen with a sh cdp nei.
We have tried various combinations of settings so far. Have tried channel 1 - 13 and the least conjested frequency mode. It usually settles on channel 8 when we put it in that mode. But it is the same sceneario each time. All 3 repeaters show up almost instantly after a channel change, but slowly disappear in less than 10 minutes.
Here is our config:
Version
Cisco IOS Software, C1240 Software (C1240-K9W7-M), Version 12.4(21a)JA1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 16-Sep-09 19:06 by prod_rel_team
ROM: Bootstrap program is C1240 boot loader
BOOTLDR: C1240 Boot Loader (C1240-BOOT-M) Version 12.3(7)JA1, RELEASE SOFTWARE (fc1)
ROOTAP uptime is 2 days, 3 hours, 14 minutes
System returned to ROM by power-on
System image file is "flash:/c1240-k9w7-mx.124-21a.JA1/c1240-k9w7-mx.124-21a.JA1"
cisco AIR-AP1242AG-E-K9    (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCZ112782K9
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
1 FastEthernet interface
2 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:1C:58:B1:72:2E
Part Number                          : 73-10256-06
PCA Assembly Number                  : 800-26918-05
PCA Revision Number                  : A0
PCB Serial Number                    : FOC11262N5Z
Top Assembly Part Number             : 800-29233-01
Top Assembly Serial Number           : FCZ112782K9
Top Revision Number                  : A0
Product/Model Number                 : AIR-AP1242AG-E-K9
Configuration register is 0xF
Root AP Config
Current configuration : 1987 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname ROOTAP
no aaa new-model
dot11 syslog
dot11 activity-timeout client maximum 120
dot11 activity-timeout repeater maximum 300
dot11 ssid WIRELESS
   authentication open
   authentication key-management wpa
   guest-mode
   infrastructure-ssid
username user privilege 15 secret 5 password
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption mode ciphers tkip
ssid WIRELESS
antenna gain 5
parent timeout 10000
channel 2417
station-role root access-point
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
shutdown
no dfs band block
channel dfs
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 192.168.2.10 255.255.255.0
no ip route-cache
ip default-gateway 192.168.2.1
ip http server
ip http authentication local
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
line con 0
privilege level 15
logging synchronous
login local
stopbits 1
line vty 0 4
privilege level 15
logging synchronous
login local
stopbits 1
line vty 5 15
privilege level 15
logging synchronous
login local
stopbits 1
end
Repeater Config
Current configuration : 1764 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname REPEATER03
no aaa new-model
dot11 syslog
dot11 ssid WIRELESS
   authentication open
   authentication key-management wpa
   guest-mode
   infrastructure-ssid
username user privilege 15 secret 5 password
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption mode ciphers tkip
ssid WIRELESS
antenna gain 5
parent timeout 10000
station-role repeater
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
shutdown
no dfs band block
channel dfs
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 192.168.2.13 255.255.255.0
no ip route-cache
ip default-gateway 192.168.2.1
ip http server
ip http authentication local
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
line con 0
privilege level 15
logging synchronous
login local
stopbits 1
line vty 0 4
privilege level 15
logging synchronous
login local
stopbits 1
end
We are wondering if you have any tips to get around this.
Also, should these access points be able to handle ~200 clients? How close to the root access point should the repeaters be placed? I basically just go until my signal gets low and put a repeater within that range. Could vary from 30-60 meters away.
Thanks

Also, should these access points be able to handle ~200 clients?
APs, in theory, can handle >1,200 clients. In theory. In practice, Cisco recommends between 12-25 clients. Imagine if you have, say, 50 clients and they are trying to access the network on a 100 Mbps FastEthernet connection. That slows them down, right? But consider wireless as a broadcast. One talks and the rest listens.

New HH3 - Issues with Kodak Printer and iPhone 3GS

Hello,
Here is the background:
Previously had a D-Link DSL-G624M router and everything connected wirelessly. This included 2 laptops, Kodak ESP 5250 Printer and iPhone 3GS. Router broadcasting on channel 6 (locked).
Since upgrading to Infinity replaced the D-Link with a HH3. Laptops connect fine but have issues with other wireless devices.
iPhone: Seems to lose internet (not necessarily wireless connection though) intermittently. The phone remains connected to the HH3 and can be seen in the DHCP table and Home Network screens. The iPhone also reports that it is connected to the HH3. However, when attempting to access the internet using either Safari or apps it doesn't work. This can be fixed by forgetting the network and re-joining or turning Airplane Mode on and then off.
Kodak ESP5250 Printer: This connects fine to the HH3 and remains in the DHCP table and Home Network with the correct IP Address. Laptop A is able to connect and print successfully. However, after putting the laptop into sleep mode and re-waking it it is unable to Print. The Printer is still connected to the HH3 and laptop claims it is 'Ready' but unable to print. The only way i have found to fix this is to re-install the entire Printer software!! However, Laptop B does not have this problem and can be put into Sleep mode, Hibernate or restart and the printer remain connected. I do not think it is a firewall issue as able to connect until re-waking from sleep.
You're probably thinking the same as me that this sounds like hardware issues and not the HH3. Maybe coincidence that it started happening after changing to HH3. Maybe something wrong with the iPhone or Laptop A and/or Printer?!? Tried setting a manual channel on the HH3 as suggested by other posts but this had no effect. (Used inSSIDer to determine best channel). Also increased the IP Address lease time from 1 Day to 21 Days - but again no difference.
Current situation: Connected the D-Link router to the HH3 using Ethernet cable. Disabled DHCP and DNS on the D-Link router and kept SSID different. Now connected all devices to the D-Link router and nothing to the HH3 and everything is working as it did previously. The iPhone remains stable and the Kodak printer remains connected to both Laptops after re-waking from Sleep Mode.
I haven't yet contacted BT but i'm leaning towards it being a dodgy HH3. Anyone have any suggestions??
Thanks,
Martyn...

For starters, there's nothing wrong with your Iphone or Kodak prn. The issue is the HH3
I had a very similar issue connecting iMac, iPad, Macbook Pro, iPhone, Thinkpad and Canon prn via wireless to the HH3... Lots of disconnections, devices that couldn't log in, very low wireless speeds, printer not recognized, etc,etc
I went mad, pretty much did the same things as you did: inSSIDer, changing channels, re-installing whole softw drv !, reorientating HH3 position, manually assigning IPs and channels... nothing would seem to work!
Then I connected a Netgear router to HH3 via ethernet cable -like you did- and suddenly everything seemed to go back to normal. Here's what I found out after much head knocking:
1) The issue is the HH3, not that it's faulty but simply put it can't deal with lots of wireless traffic. The minute you connect several devices it gets clogged up
2) HH3 seem not to recognize WiFI printers that have a 'static' IP (not sure why)... this was a nightmare
3) if you have many devices connected, HH3 doesn't seem to 'like' Apple devices or wifi Airport powered (not sure why). After sleep mode these device can't pick up IP over the air, and you need to manually renew DHCP leases. There are several reports about this in Apple forums.
So here's what I did:
1) I ditched the HH3
2) I connected the Openreach router to a dual-band Netgear wndr3400 **cable** router (PPPoE connection)
3) I re-installed the prn drv in USB mode and then added wifi printer in wifi mode while usb connected
4) I created two-split WIFI networks; one in the channel 6/2.4Ghz frequency and another in the channels 44-48/5Ghz freq to which I assigned most devices (It seems BT Infinity wifi works best in 5Ghz channels)
Results: all devices recognised & connected via WiFI, no disconnections, steady WIFI speed almost as fast as ethernet cable, wifi prn prints fine from all devices... No more WIFI connnectivity issues.
I hope this helps, good luck
(note: my current issue is that my profile dropped from 34/8 to 21/2 during testing phase)

Issue with Workbook Broadcasting

Similar Messages

Maybe you are looking for