Issue with XDCam log and transfer update

I'm trying to install Sony's XDCAM EX Log and Transfer Plug-in, and only can get as far as the "Destination Select" tab, where I'm informed that it "can't be installed on this disk. Final Cut Pro 6.0.3 or higher is recommended for this software."
I just installed Final Cut Pro 7 yesterday.
... what gives? Do I even need this update to be able to manage the videos from my PMW EX1r? I was unable to use them in final cut pro when I tried earlier, and was led to that "Log and Transfer Plug-in" from Sony and told it was the solution, which now won't allow me to even install it.

You have a number of options, make sure you have the latest Sony XDCAM EX Log and Transfer plug in (v1.2) also grab Sony's XDCAM Transfer (v2.12) which you can use instead of the aforementioned L&T plug in. Plus there is Sony's Clip Browser app (v2.6) for checksum validated offloading of the media from the camera/cards ... and now there is a brand new app called Sony XDCAM Browser (v1.0) which is designed to combine/consolidate the functions of the various utilities into one single handy dandy app. Unfortunately in this first release it has far inferior functionality as compared to what can be managed with the separate apps.
All of the above can be most easily downloaded (requires no registration) from Sony's Canadian website:
http://support.sonybiz.ca/esupport
Hope it helps
Andy
Andy

Similar Messages

Working with AVCHD: Log and Transfer FAQs

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Working with AVCHD: Log and Transfer FAQs
Log and Transfer was introduced to the product chain in Final Cut Express 4, and is the program's process for ingesting files in the AVCHD format utilizing MPEG-4 AVC/H.264 video coding and either Dolby AC-3 or uncompressed linear PCM audio coding. The most frequently observed problems relating to the Log and Transfer process are generally quite easily addressed.
What should I know before attempting to ingest my footage?
The following facts regarding the Log and Transfer process were adapted from the [Apple Knowledge Base article|http://support.apple.com/kb/TA24840?viewlocale=en_US] on transferring AVCHD in Final Cut Pro 6.0.1 but still hold true for the current version of FCE:
AVCHD support is available only on Intel-based Macintosh computers.
AVCHD camcorders typically connect to computers via USB 2.0, not FireWire.
DVD-based AVCHD camcorders are not supported in Mac OS X 10.4 or earlier.
Standard definition video recorded with AVCHD camcorders cannot be accessed in the Log and Transfer window. SD and HD clips should not be mixed on the same HDD.
Preview of AVCHD video in the Log and Transfer window is limited to 1x forward playback. Scrubbing the playhead does not update the video in the Preview area until you stop scrubbing.
When you choose to transfer AVCHD audio in the Logging area, audio is automatically mixed down to stereo.
AVCHD footage is not ingested natively but is transcoded to the Apple Intermediate Codec.
Apple Intermediate Codec files are significantly larger than the original AVCHD files. FCE does not estimate the size of a transcoded AVCHD file before ingesting, so it is possible to exceed the available space on your capture disk during transfer. Before ingesting, keep in mind that the disk space required is about ten times greater than the size of the native AVCHD file.
Which specific formats can be ingested by Log and Transfer?
Only AVCHD footage can be ingested through the Log and Transfer process. Other formats and variants such as AVCHD Lite are not supported. All video should be recorded in a frame size of either 1440x1080 or 1920x1080 and a frame rate of 25 or 29.97 frames per second. Audio recorded on AVCHD camcorders is generally at a rate of 48kHz. If your camera shoots in a format that does not comply with one of these setups then it is most likely not supported by the application and is not guaranteed to work correctly.
Which Easy Setup preset should I select before ingesting my footage?
It is extremely important to select the preset that matches your media before you attempt to ingest via Log and Transfer. There is only one Easy Setup preset that matches the frame size and rate of your footage. If you intend to ingest AVCHD clips through Log and Transfer you will first need to select one of the following presets:
AVCHD-Apple Intermediate Codec 1440x1080i50
AVCHD-Apple Intermediate Codec 1440x1080i60
AVCHD-Apple Intermediate Codec 1920x1080i50
AVCHD-Apple Intermediate Codec 1920x1080i60
If these four options do not appear under your Easy Setup list then you probably need to run Software Update and update to FCE 4.0.1. DO NOT cycle through the available presets until you find one that works - there is only one preset that matches your media and it should be evident which one to choose by the way it is named. Select the AVCHD preset that mentions your frame size and frame rate (i50 presets support both 50i and 25p frame rates; similarly, i60 presets support both 60i and 29.97p frame rates). If you do cycle through many options in the hope of selecting the correct one through guess-and-check you will probably have corrupted your preference file and need to [trash your preferences|http://support.apple.com/kb/TS2611] before continuing.
Why don't my clips appear when I open the Log and Transfer window?
Make sure your camcorder records AVCHD in a format supported by FCE4. It should be connected to one of your computer's USB ports (never connect it to an external hard drive or other external device such as your keyboard or a USB hub), powered on, and set to video playback mode.
If the camcorder +does not+ mount on your Desktop your USB port or cable may be malfunctioning. Try plugging it in to another port or using a different USB cable to see if it makes a difference.
If the camcorder does mount on your Desktop but the clips do not appear in the Log and Transfer window you will need to point the program to the directory that contains your media.
First, click the Add Folder button in the upper left of the Log and Transfer window. The button looks like this:
Then, you will need to navigate to the root directory in which your media is stored. Most camcorders call this folder "PRIVATE" or "AVCHD" and it should be located at the very top level of the camcorder when mounted. If your camcorder records to a valid AVCHD directory structure then your clips should load after the Add Folder process is completed.
I would like to keep a working backup of my original clips so that I can delete them off the camcorder's internal memory. How should I do this?
There are two main ways to keep a backup of your clips. The first is to ingest every clip on your camcorder through the Log and Transfer process, and store the Apple Intermediate Codec files the application creates in an easily accessible place such as an external FireWire drive. The advantage of this method is that you have the ability to open back up old editing projects, reconnect the media as necessary, and keep going as if you'd never left. However, due to the large amount of space AIC takes up (usually somewhere in the vicinity of 41-50GB an hour when transcoded from AVCHD), this is not always feasible.
Another often preferable approach is to copy over the root directory in which your clips are stored (usually named "PRIVATE" or "AVCHD") from the camcorder to your computer or an external drive. As long as you maintain the original file structure, you will be able to ingest your clips again at a later date using the "Add Folder" process detailed above to navigate to their new location.
My clips appear, but when I attempt to ingest a red exclamation point appears and the window displays the message "Error: No Data"
This is one of the most common problems that users experience when trying to ingest their media through the Log and Transfer process. Luckily, it also has one of the easiest solutions.
In the Log and Transfer window, click on the gear icon in the top right and select "Preferences" in the contextual menu that appears.
Make sure the video is set to transcode to the Apple Intermediate Codec and the audio is set to Plain Stereo.
After doing so, hit OK and try to ingest again.
I am experiencing a problem that is not covered in this tip or the solutions here do not work.
The best thing to do at this point would be to trash your preferences and start a new topic in the [FCE Forum|http://discussions.apple.com/forum.jspa?forumID=936&start=0] with a detailed description of your problem. Check out the user tip on [Basic Troubleshooting in Final Cut Express|http://discussions.apple.com/thread.jspa?threadID=2662419] for more information.
This is the 1st version of this tip. It was submitted on December 03, 2010 by skalicki`.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Working with AVCHD: Log and Transfer FAQs
Log and Transfer was introduced to the product chain in Final Cut Express 4, and is the program's process for ingesting files in the AVCHD format utilizing MPEG-4 AVC/H.264 video coding and either Dolby AC-3 or uncompressed linear PCM audio coding. The most frequently observed problems relating to the Log and Transfer process are generally quite easily addressed.
What should I know before attempting to ingest my footage?
The following facts regarding the Log and Transfer process were adapted from the [Apple Knowledge Base article|http://support.apple.com/kb/TA24840?viewlocale=en_US] on transferring AVCHD in Final Cut Pro 6.0.1 but still hold true for the current version of FCE:
AVCHD support is available only on Intel-based Macintosh computers.
AVCHD camcorders typically connect to computers via USB 2.0, not FireWire.
DVD-based AVCHD camcorders are not supported in Mac OS X 10.4 or earlier.
Standard definition video recorded with AVCHD camcorders cannot be accessed in the Log and Transfer window. SD and HD clips should not be mixed on the same HDD.
Preview of AVCHD video in the Log and Transfer window is limited to 1x forward playback. Scrubbing the playhead does not update the video in the Preview area until you stop scrubbing.
When you choose to transfer AVCHD audio in the Logging area, audio is automatically mixed down to stereo.
AVCHD footage is not ingested natively but is transcoded to the Apple Intermediate Codec.
Apple Intermediate Codec files are significantly larger than the original AVCHD files. FCE does not estimate the size of a transcoded AVCHD file before ingesting, so it is possible to exceed the available space on your capture disk during transfer. Before ingesting, keep in mind that the disk space required is about ten times greater than the size of the native AVCHD file.
Which specific formats can be ingested by Log and Transfer?
Only AVCHD footage can be ingested through the Log and Transfer process. Other formats and variants such as AVCHD Lite are not supported. All video should be recorded in a frame size of either 1440x1080 or 1920x1080 and a frame rate of 25 or 29.97 frames per second. Audio recorded on AVCHD camcorders is generally at a rate of 48kHz. If your camera shoots in a format that does not comply with one of these setups then it is most likely not supported by the application and is not guaranteed to work correctly.
Which Easy Setup preset should I select before ingesting my footage?
It is extremely important to select the preset that matches your media before you attempt to ingest via Log and Transfer. There is only one Easy Setup preset that matches the frame size and rate of your footage. If you intend to ingest AVCHD clips through Log and Transfer you will first need to select one of the following presets:
AVCHD-Apple Intermediate Codec 1440x1080i50
AVCHD-Apple Intermediate Codec 1440x1080i60
AVCHD-Apple Intermediate Codec 1920x1080i50
AVCHD-Apple Intermediate Codec 1920x1080i60
If these four options do not appear under your Easy Setup list then you probably need to run Software Update and update to FCE 4.0.1. DO NOT cycle through the available presets until you find one that works - there is only one preset that matches your media and it should be evident which one to choose by the way it is named. Select the AVCHD preset that mentions your frame size and frame rate (i50 presets support both 50i and 25p frame rates; similarly, i60 presets support both 60i and 29.97p frame rates). If you do cycle through many options in the hope of selecting the correct one through guess-and-check you will probably have corrupted your preference file and need to [trash your preferences|http://support.apple.com/kb/TS2611] before continuing.
Why don't my clips appear when I open the Log and Transfer window?
Make sure your camcorder records AVCHD in a format supported by FCE4. It should be connected to one of your computer's USB ports (never connect it to an external hard drive or other external device such as your keyboard or a USB hub), powered on, and set to video playback mode.
If the camcorder +does not+ mount on your Desktop your USB port or cable may be malfunctioning. Try plugging it in to another port or using a different USB cable to see if it makes a difference.
If the camcorder does mount on your Desktop but the clips do not appear in the Log and Transfer window you will need to point the program to the directory that contains your media.
First, click the Add Folder button in the upper left of the Log and Transfer window. The button looks like this:
Then, you will need to navigate to the root directory in which your media is stored. Most camcorders call this folder "PRIVATE" or "AVCHD" and it should be located at the very top level of the camcorder when mounted. If your camcorder records to a valid AVCHD directory structure then your clips should load after the Add Folder process is completed.
I would like to keep a working backup of my original clips so that I can delete them off the camcorder's internal memory. How should I do this?
There are two main ways to keep a backup of your clips. The first is to ingest every clip on your camcorder through the Log and Transfer process, and store the Apple Intermediate Codec files the application creates in an easily accessible place such as an external FireWire drive. The advantage of this method is that you have the ability to open back up old editing projects, reconnect the media as necessary, and keep going as if you'd never left. However, due to the large amount of space AIC takes up (usually somewhere in the vicinity of 41-50GB an hour when transcoded from AVCHD), this is not always feasible.
Another often preferable approach is to copy over the root directory in which your clips are stored (usually named "PRIVATE" or "AVCHD") from the camcorder to your computer or an external drive. As long as you maintain the original file structure, you will be able to ingest your clips again at a later date using the "Add Folder" process detailed above to navigate to their new location.
My clips appear, but when I attempt to ingest a red exclamation point appears and the window displays the message "Error: No Data"
This is one of the most common problems that users experience when trying to ingest their media through the Log and Transfer process. Luckily, it also has one of the easiest solutions.
In the Log and Transfer window, click on the gear icon in the top right and select "Preferences" in the contextual menu that appears.
Make sure the video is set to transcode to the Apple Intermediate Codec and the audio is set to Plain Stereo.
After doing so, hit OK and try to ingest again.
I am experiencing a problem that is not covered in this tip or the solutions here do not work.
The best thing to do at this point would be to trash your preferences and start a new topic in the [FCE Forum|http://discussions.apple.com/forum.jspa?forumID=936&start=0] with a detailed description of your problem. Check out the user tip on [Basic Troubleshooting in Final Cut Express|http://discussions.apple.com/thread.jspa?threadID=2662419] for more information.
This is the 1st version of this tip. It was submitted on December 03, 2010 by skalicki`.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Need help with our "log and transfer" workflow...

All,
Again, it's our first tapeless project so please keep having patience with us.
What should the workflow be for our project?
I bring in the Firestore and dump raw files to a hard drive. Should I then transfer all footage to QT files? OR should my editor start looking at footage and carving it up as he transfers those files to QT?
Our issue is that we have a lot of footage coming in and the new tower is slow when transferring footage from raw files to QT. It's driving us crazy.
Aside from buying a more powerful tower, is there a way for us to review and log the footage and transfer at a real time pace (for example, is there a way to log the footage and do a transfer to QT files at the end of session?).
Thanks.

David, thanks for the questions.
Yes, it's FS-100. And yes, we are shooting on a HVX200.
The settings we were given by our editing guru create MXF files rather than QT. If so, we should dump onto a hard drive and then bring into FCP, correct?
Is there a way to log a number of clips and then transfer them en masse? Or do I have log and transfer them one at a time?
Our issue is that the computer grinds to a virtual halt while transferring.
Thanks again. We look forward to your thoughts.

Trouble with RED Log and Transfer in FCP6

Hi there,
I am cutting my first RED feature and am having an issue getting all my footage into FCP 6. I decided to go with the RED Quicktime files and am Log and transferring them in as we speak. Most of the footage was able to be dropped right in with no problem what so ever but I am on the last 1TB hard drive and it won't mount the folders to transfer the footage except one. One folder when in fine but the rest won't even mount. I tried importing each .RDC folder in on its own but I get an error:
WARNING
"A008c001_0212LV001.R3D" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media.
Obviously these files are put together the same way as the other couple hundred files but these ones are giving me trouble. Has anyone else ran into this problem and how do I get the footage in.
By the way I can open the .R3D files in Red alert without any problem
Thanks,
~Jake

A while has passed, unfortunately. I've been working my way through this mess, as well.
When you get the "unsupported media or has an invalid directory structure" message it usually indicates that a catalog-like file is missing. The same now happens with P2 transfer.
Check for an ".rsx" file within the RDC folder. Log and Transfer may not be happy if this file is missing. Sometimes it gets missed when the media is being consolidated across drives.
** What I'm having trouble with now is that Log and Transfer repeatedly fails to load a selected directory --- except on the umpteenth attempt. You know, the one where I'm beyond the point that most normal people are up the Bell Tower sniping at the citizenry.
jPo
Message was edited by: JP Owens

SONY XDCAM LOG and TRANSFER CRASHING FCP

I am trying to log and transfer xd cam footage. every time i open the log and transfer window, FCP crashes. What is the cleanest way to get rid of the xdcam plugin.
the error message reads:
The application Final Cut Pro quit unexpectedly after it was relaunched. The problem may have been caused by the SonyXDCAM plug-in.
I have tried to get rid of it and obviously failed because i keep getting that message which tells me it's still there.
Can someone give me a step by step on how to get rid of it?
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 3.2 GHz
Number Of Processors: 2
Total Number Of Cores: 8
L2 Cache (per processor): 12 MB
Memory: 8 GB
Bus Speed: 1.6 GHz

Shane's Stock Answer #44: FCP acting weird or unusual. Just not like is normally should
If the program was working fine, and now isn't, or just isn't working the way it should, the first things to do are:
1) Trash your FCP preferences. Download the Preference Manager from Digital Rebellion: http://www.digitalrebellion.com/pref_man.htm
http://www.kenstone.net/fcphomepage/trashing_fcpprefs.html
2) Open the Disk Utility and Repair Permissions.
3) Shut down for 10 min. Go for a quick walk around the block and get SOME exercise today. Come back, turn on the computer and see how things are.
4) (optional) Do the Hokey Pokey and turn your self about. Results may vary.
Shane

Uknown Error with AVCHD Log and Transfer

Hi All,
I have a Lumix GH1, and have been logging and transferring video perfectly through FCP up until this point. Recently, I filmed a live concert in full HD, and shot one long, hour and 15 minute take. When I tried to import the file via log and transfer, I'm encountering a little red stop sign with an exclamation point in the que which reads "Error: Unknown". I have pointed FCP to the "Private" file and it comes up fine as a thumbnail.
My concern is that the file is corrupt. However, the clip is also playing fine in the preview, which keeps me thinking something is salvageable. I also thought it might have something to do with the 2GB limit, so I tried importing a small section with the same result. Basically, I'm having no luck and my contract is getting upset with the time delay.
Anyone have any clue how to proceed?
Any help would be hugely appreciated.

freeform23, I can only hazard a guess but try some of these (these are NOT steps just suggestions):
1. Copy the video file to another location and try re-importing from there?
2. Import using another CODEC
3. Copy file onto DeskTop and FIRST play it in QT Player, then try Import!
Sorry I couldnt have been of any more help.

Issues with iPod Touch and latest update (4.3.3)?

I recently updated my iPod Touch 3G to 4.3.3. Before updating, I had absolutely no issues. Since updating, the iPod will shut off at will, sometimes flickering, sometimes going straight to the "slide to shut down" screen. Sometimes it will shut down in the middle of an app, I'll start it back up, and it will shut down again immediately. Occasionally, when I start it up after crashing, it will make the camera shutter sound! And there's no camera on this iPod!
Possible extenuating circumstance: I upgraded from a Power PC iMac to an Intel iMac at the same time I updated the software on the iPod. I have read the suggestions and the troubleshooting guide, and nothing has helped so far. I wiped the iPod clean and reinstalled and all that did was wipe out my settings (of course). Resyncing the iPod worked (apps and music loaded fine), but still it shuts down without warning. I tried installing a new free app, but that didn't work.
Usually I'm pretty good at figuring out these sorts of issues, but I'm at my wits end. Is anyone else having these problems? Am I screwed?

Okay, so now I have read that you have to install a free app through the phone, not through the computer. I've done so and it looks like everything is good for now. Keeping my fingers crossed. My question now, is that if this is a common occurance with the 4.3.3 update, why did Apple imply that I needed to wipe my iPod clean when this was the much easier and less invasive answer?

Facing Issue with MARS Logs and reports

Hi
We have intergrated PIX Firewall and Router with MARS(4.3.3) . we are able to get the AAA Pass/FailAttempts & Configuration Changes for PIX Firewall but not for Router .
We check on the Agent Machine where we have install Windows Remote Agent of ACS . There we are able to see the logins Pass/FailAttempts made in Routers but its big question that why its not getting . reflected in MARS .Even for configurtion Change report we have given the IP-address of MARS to one of our Syslog Machince and found that the Syslogs from Routers are getting reflected there but if change back to MARS then we are not able to get it reflected
CAN anyone help me out in this issue as you can see above we have tried all possible troubleshooting

Hi
We have intergrated PIX Firewall and Router with MARS(4.3.3) . we are able to get the AAA Pass/FailAttempts & Configuration Changes for PIX Firewall but not for Router .
We check on the Agent Machine where we have install Windows Remote Agent of ACS . There we are able to see the logins Pass/FailAttempts made in Routers but its big question that why its not getting . reflected in MARS .Even for configurtion Change report we have given the IP-address of MARS to one of our Syslog Machince and found that the Syslogs from Routers are getting reflected there but if change back to MARS then we are not able to get it reflected
CAN anyone help me out in this issue as you can see above we have tried all possible troubleshooting

Is there a XDCAM log and transfer plugin for FC EXPRESS???

I am working on a project using Final Cut Express, but this time the material was shot with an XDCAM, so I received it in two SD HC memory sticks. I have a Sony multi-card reader. Is there a XDCAM plugin for FCExpress??? If not, is there a way to convert the files to use them without having to upgrade to FCP??? Help!!!
- Pekas

This may work:
http://www.calibratedsoftware.com/QXD.asp

Log and Transfer slower in FCP 7?

Hi,
Here at my job, we often work with the RED camera. As a workflow, we use Log and Transfer to convert all red files into Apple Pro Res. We used to work with FCP 6.0.6 and when we did, 1 hour of footage took 2h (3h max!!) to convert. This week though, we upgraded to Final Cut Studio 3 (thus upgrading to FCP 7.0.1) and the conversion time increased dramatically!
It's not rare for Directors to use the full 4k resolution with that camera. But for that project, he only used the 2k and 3k resolutions. So I started to Log and Transfer and came back 3 hours after that and not even 1/3 of the batch was converted! What I didn't know with the new version, is that it automatically converts in Apple Pro Res 4444, instead of Apple Pro Res 4:2:2 (HQ), as it did before. So I did some tests. I took 10 minutes of footage and tried to convert them in:
Test #1 - Apple Pro Res 4444 *highest quality possible*
Test #2 - Apple Pro Res (proxy) *lowest quality possible, for offline*
Test #3 - Apple Pro Res (HQ) *2nd to best quality possible*
And to my surprise, those 3 tests gave me the same results. For 10 minutes of footage, the conversion took 1h08 (Actually, 1h08 for test #1, 1h06 for test #2 and 1h07 for test #3). That means that for 1 hour of footage, you'd need at least 6 hours of conversion time! This is crazy. And it's not because we have bad computers... we have Mac Pros, dual quad-cores with 8gb of ram in them. I mean, it takes less time to convert the red files into .mxf files for Avid (approx. 4h for 1 hour of footage)!
So my question is: Why the heck would it take longer to convert Red files with the Log and Transfer tool in the latest version of Final Cut Pro?
Thank you,
André
401

Yes, exactly like this one

AVCHD Import Error In Log And Transfer Window

Hey,
I just bought FCE4 and also a canon hf100 camera. When i try to ingest clips from the camera (in avchd format) with the log and transfer window an error icon comes up and says : "error: no data" and the file is not successfully imported. I tried switching my audio preferences to normal stereo instead of matrix but that did not help.
Any help would be great!
Jackson

What format exactly did you shoot with that camera? What settings are you using in FCE?

Log and Transfer Issue with JVC Camera.

Hello all,
I am using JVC GY-HM100U and Final Cut Studio (FCP7.0.3).
I have installed JVC_Plugin1_0_3.dmg as Apple recommended.
However, when I connect SD card to FCP, I can not still use 'log and transfer' of FCP.
Do you know what's the issue is?
Thank you.

The warning sign pops-up as below.
"CLIP" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media.
I am recording in Kingstone 16GB Class 10 SD card.-I have formatted before using it.
I am shooting with 1080 60i.
Thank you.

A conclusion to ALL the AVCHD/.mts Log and Transfer Final Cut Pro 7 issues

Hey all! Happy 2011!
So this is my first post here and hopefully when this thread concludes with all your help we should be able to help a lot of people and save them the heartache that I have recently had to endure by stating these things in plain English. I have some questions at the end which I think could be answered very easily! Please, no gobbledygook!
It would be great if people in the know can confirm/deny or comment on my points so those that are in a similar position to me can save their time and just get on with it.
1) I have a Panasonic HDC-TM300 and it records in AVCHD/.mts files
2) FCP 7 can deal with AVCHD files via the Log and Transfer feature if you do it straight from the camera or memory card and can convert to ProRes 422 (LT)?
3) Log and Transfer _*DOES NOT WORK*_ if you move the AVCHD/.mts to an external drive without maintaining the folder structure?
4) What is required from the folder structure that makes FCP act this way?
5) Basically I have f*ed it by doing the part 3 above which I think is the most natural thing in the world to do! Im sure that many people have done the same thing as me please correct me if i’m wrong
After a lot of research on the internet I have come up with the following solutions and in brackets my thoughts on them. If anyone has any experience with them please please let me and other people know so I can get on with my life and editing these files.
a) Harass the people that make FCP 7.0 and make sure that the next update solves this stupid/idiotic/ridiculous oversight. (This could take a while but i think we should do it for the sake of future generations)
b) Someone could let us know about a workaround to this that may be the folder structure that FCP needs to be able to do L&T (needs to be simple so that everyone can do it. This would be the best short term solution until part a is completed)
c) Buy one of the converter programs such as ClipWrap, Toast Titanium or Aunsoft mts converter. If so which is the most/ least recommended and why? (Least desirable option due to requirement for extra program so extra faffing and extra cost).
Thanks y’all and keep up the awesome work!!
K*

2) FCP 7 can deal with AVCHD files via the Log and Transfer feature if you do it straight from the camera or memory card and can convert to ProRes 422 (LT)?
Yes.
3) Log and Transfer DOES NOT WORK if you move the AVCHD/.mts to an external drive without maintaining the folder structure?
This is true of ANY tapeless format.
4) What is required from the folder structure that makes FCP act this way?
This is due to the fact that most of them have files in those other folders in that structure that FCP needs to access in order to get all the proper components assembled properly. Sure, there are formats that have folders with nothing in them. Doesn't matter, FCP is designed to look at the full structure and work from that.
5) Basically I have f*ed it by doing the part 3 above which I think is the most natural thing in the world to do!
The most natural thing in the world is to NOT backup everything? Well, that might be the case, since this comes up so darn often. But, it is wrong. The full structure must be maintained. This is true of many tapeless formats and more than just FCP. Avid and Premiere need this for certain tapeless formats too.
a) Harass the people that make FCP 7.0 and make sure that the next update solves this stupid/idiotic/ridiculous oversight.
It isn't an oversight. It is designed like this on purpose. You need to learn how to do things right. You obviously know what that is now...keep the full card structure. So now it is up to you to continue to do things properly. Instead of insisting that an NLE conform the way it works to suit your needs.
b) Someone could let us know about a workaround to this that may be the folder structure that FCP needs to be able to do L&T (needs to be simple so that everyone can do it. This would be the best short term solution until part a is completed)
Easy. Shoot a small bit on another card. Look at the folder structure. Recreate that structure in your backed up footage. Often this will mean making folders with exact names, even if they are empty. But if they have files in them, even small ones, then the first backup you did might not work....because those might be some of the small files FCP needs in order to do the L&T process properly. Always worth trying though.
c) Buy one of the converter programs such as ClipWrap, Toast Titanium or Aunsoft mts converter. If so which is the most/ least recommended and why?
I highly recommend Clipwrap. Mainly because I haven't tried the others. But also because the author is always following the latest formats, and works hard to make sure his software works with them. It solved an importing issue I had with the Sony NXCam camera...within a week of me moaning about the issue.
Want a tutorial to walk you through the tapeless workflow in FCP? I have one. Tapeless Workflow for FCP 7 Tutorial You might know most of this, but watch it for other tips.
Shane

Log and Transfer Errors with HF10/HF100 AVCHD Cams

Log and transfer will transfer about 80% of clips on the Canon HF10 AVCHD camcorder, but the rest receives a red exclamation icon hovering over which brings the useless explanation box "Unknown Error".
Using My Book Pro II dual HD with data stripping connected via Firewire, no speed issues there. Over 900GB is free on the drive, too. Moreover, copying the BDMV > STREAM > *.MTS structure to a DVD and then running the Log and transfer brings up the same error and nothing is transferred.
The best part is that the same clips transfer just fine using iMovie '08. It is even possible to then import them from the iMovie project folder into Final Cut and then work with them.
Hopefully some smart person has an idea what I could try. Thanks!

OK, people. Got a freaking work-around.
Select the clip in the log and transfer window *), then define your IN and OUT points for this clip, THEN hit "Add to Queue". Marked portion of the clip will import nicely. Now we just need full 1980x1020 support. Hopefully an updated FCE soon?
*) Interface of the Log and Transfer window is as beautiful as any Mac app. Why hasn't that interface lift ever made it to the rest of Final Cut? Hopefully, next version.

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

That's what I would have thought, but even after saving the setting, as soon as I shut down my computer or log out of Mail, it automatically defaults back to 25. It's a bit frustrating.
Now I just need to figure out how to get rid of those horrible pop-up banners but still have my glass sound and number of emails in the red dot when I get an email...
These little tweaks are the only thing I HATE about upgrading my OS.

Issue with XDCam log and transfer update

Similar Messages

Maybe you are looking for