Issue with XML PDF and AdobeDesigner!

Hello! I have a PDF Document! With Acrobat Proffesional Reader i can File -> Export Form Data (Hope this is right in english) A new XML File will be generated The conten of the File <?xml version="1.0" encoding="UTF-8" ?> - <ichicsr lang=""> - <ichicsrmessageheader =""> <messagetype ="" /> <mailrcpt ="">[email protected]</mailrcpt> <mailbody ="">Test</mailbody> To this Point all works fine... but when i Load up the PDF File in AdobeDesigner, and save it up. (I do no changes at this Point, only Save the file.) and close And then i export second time the xml data with Acrobat Proffesional Reader the conten looks like this: <?xml version="1.0" encoding="UTF-8" ?> - <ichicsr lang=""> - <ichicsrmessageheader lang=""> <messagetype lang="" /> <mailrcpt lang="">[email protected]</mailrcpt> <mailbody lang="">Test</mailbody> everywhere is written lang?!?!?!?! WHY??? How can I eliminate this effect?! HELP and sorry for my bad english!

Your XML processor should just ignore the tags it doesn't understand -
no problem.
It sounds as if you are trying to create a very simplified XML parser
that looks for text patterns. I advise against this. There are many
tools designed to parse XML and which will take care of the special
issues. A simple text approach will collapse the first time someone
types an ampersand "&" in their text...
Aandi Inston

Similar Messages

Two issues with firefox (pdf and downloads)

Hi,
two points bother me since a long time:
1. Reading pdf: In most cases I'm unable to read pdf-files in the browser. When I click on a link to a pdf a new tab opens and firefox loads. After some seconds the statusbar says finished (? in German it's fertig) but the window stays empty. Switching thorugh the tabs and back to the pdf results in not seeing anything but the last active tab.
I already went to the preferneces and changed the pdf viewer for "\application\pdf" from acroread to evince but this didn't solve the problem.
I'm on x86_64 so I have installed lib32-acroread from AUR. Currently I have to save the pdf and because of issue #2 I have can't open it directly and some for some pdf in the web this isn't possible.
2. Downloads: Both, double click on the downloaded file and chosing "open containig folder" don't do anything. I tried the suggested sulution here but with no success: http://rubylution.ping.de/articles/2007 … nder-linux
Thanks in advance
Barghest.
P.S.: My WM: awesome

Unfortunately there is no "save as.." in their online service.
These instructions may give back the right-click "Save Page as..." menu.
From Preferences select the Content tab and have the Enable Javascript button checked (true). Then click on the button labeled "Advanced..." From the next box that opens, uncheck "Disable or replace context menus."
I run with all the boxes unchecked and have "Open new windows in a new tab instead" set, so I almost always have the full Firefox menus available. There are a few web pages that still defeat this setup partially -- some images won't save.

How send e-mail with XML + PDF and body text

Hi everyone,
I have a new requirement but I´m with doubts, how to send an e-mail with two attachements (XML and PDF) and body text using -
MIME: multipart/mixed;boundary
I already have code to send XML + body text as you can see below:
Element contentType = docout.createElement("Content_Type");
root.appendChild(contentType);
Text contentTypeText = docout.createTextNode("multipart/mixed;boundary=--AaZz");
absTraceLog.addDebugMessage("Content_Type e-mail --- "+contentTypeText.toString());
contentType.appendChild(contentTypeText)
String text = "----AaZz\r\nContent-Type: text/plain; charset=UTF-8\r\n" +
        "Content-Disposition: inline\r\n\r\n" + nfeText +
        "\r\n----AaZz\r\nContent-Disposition: attachment; filename="+ prefixo +" "+ chaveNFe +".xml" +"\r\n\r\n" + xmlString + "\r\n";
Element content = docout.createElement("Content");
root.appendChild(content);
contentText = docout.createTextNode(text);
Content.appendChild(contentText);
The code above work good, but I can´t duplicate any field from XiMail 3.0 - because it´s 0:1.
So how to do that ?
Thanks.
Regards,
BR.
Viana.

Eng,
That´s works good with mailPackage:
            content= "--" + "--Zz" + CRLF
                    + "Content-Type: text/html; charset=UTF-8" + CRLF
                    + "Content-Disposition: inline" + CRLF + CRLF
                    + textBodyMail + CRLF
                    + "--" + "--Zz" + CRLF
                    + "Content-Type: application/xml; name=" + attachmentName + CRLF
                    + "Content-Disposition: attachment; filename=" + attachmentName + CRLF
                    + "Content-Transfer-Encoding: base64" + CRLF + CRLF
                    + encoder.encode(inputString.getBytes("UTF-8")) + CRLF
                    + "--" + "--Zz" + CRLF
                    + "Content-Type: application/pdf; name=" + pdfName + CRLF
                    + "Content-Disposition: attachment; filename=" + pdfName + CRLF
                    + "Content-Transfer-Encoding: base64" + CRLF + CRLF
                    + encoder.encodeBuffer(new BASE64Decoder().decodeBuffer(pdfAttachment));
Regards,
BR.
Ricardo Viana.

Issues with XML Content and Actions to import RRA in FPN (EP7 SPS13)

Hi,
I am having trouble using the import functionality of XML Content and Actions to transport Remote Role Assignments between Consumer Portals. Whenever I want to upload an XML file containing RRA for Roles and Groups that were already assigned to eachother, the import fails and nothing is updated. The error I get:
UMException. Data could not commit to Role: gp:/[full ID of portal role]
Anyone with experience in how to use this?
Kind regards,
Christian Staalby

hi,
@Maksim :
When user launch an URL like http://myserver:port/irj/portal/ import/*filename=C:\test.xml, he is requested to provide username and password; as this link is a shortcut for the upload xml page, there is a check of authorization and only portal admin that have authorization and permission on this page/iview will be able to upload xml file through the URL. Hope this clarify.
@Kumar :
thank you for your answer. What a pity to not be able to pass parameter through standard portal page/iview particularly knowing that we can pass paramater through many kinds of iviews (transactional iview, url iview, VC iview...). I explored some option on file com.sap.portal.ivs.init.par but this was unsuccessful. However, thanks to this [link bellow|http://wiki.sdn.sap.com/wiki/display/Snippets/ComponenttouploadXMLfilewithPCD+objects], I was able to upload through URL the XML file.
The problem is that I can upload only XML file that are stored in the server not in the local user computer. My requirement is to be able to upload local XML file stored on user's computer.
If someone could provide and idea/solution, I would be very grateful.
Cheers

Issue with XML namespace and Message structure

Hi All,
I am using Oracle SOA Suite 11.1.1.4. I have SOA web service application one-way messaging wherein I keep receiving messages from the third party. The issue I am facing is with the XML namespaces which conflicts with the third party's message structure. The details are as below.
Our Web-service WSDL*
<schema attributeFormDefault="unqualified" elementFormDefault="qualified"
targetNamespace="http://amb.com/cad/RealTimeService"
xmlns:cad="http://amb.com/cad/RealTimeService"
xmlns:avl="http://schemas.com/asiapac/cad/datamodel/avl/1.0.0"
xmlns:evn="http://schemas.com/asiapac/cad/datamodel/event/1.0.0"
xmlns:uni="http://schemas.com/asiapac/cad/datamodel/unit/1.0.0"
xmlns:dvt="http://schemas.com/asiapac/cad/datamodel/divert/1.0.0"
xmlns:sui="http://schemas.com/asiapac/cad/datamodel/suppinfo/1.0.0"
xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://schemas.com/cad/datamodel/avl/1.0.0"
schemaLocation="AvlCadSchema.xsd"/>
<import namespace="http://schemas.com/cad/datamodel/unit/1.0.0"
schemaLocation="UnitCadSchema.xsd"/>
<import namespace="http://schemas.com/cad/datamodel/event/1.0.0"
schemaLocation="EventCadSchema.xsd"/>
<import namespace="http://schemas.com/cad/datamodel/divert/1.0.0"
schemaLocation="HewsCadSchema.xsd"/>
<import namespace="http://schemas.com/cad/datamodel/suppinfo/1.0.0"
schemaLocation="SupplementalInformationCadSchema.xsd"/>
<element name="AvlAuxData" type="avl:AvlAuxData" nillable="true"/>
<element name="AgencyEvent" type="evn:AgencyEvent"/>
<element name="Diversion" type="dvt:HospitalDiversionMessage"/>
<element name="SupplementalInformation" type="sui:SupplementalInformation"/>
<element name="UnitDetail" type="uni:UnitDetail"/>
</schema>
Using SOAP UI tool a HospitalDiversionMessage Request for the above WSDL will look like*
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:real="http://amb.com/cad/RealTimeService" xmlns:ns="http://schemas.com/cad/datamodel/divert/1.0.0">
<soapenv:Header/>
<soapenv:Body>
<*real*:Diversion>
<ns:Action>?</ns:Action>
<ns:Open>?</ns:Open>

<ns:Location>?</ns:Location>
<ns:Type>?</ns:Type>
<ns:SubType>?</ns:SubType>

<ns:ExpiryTimestamp>?</ns:ExpiryTimestamp>

<ns:Comment>?</ns:Comment>

<ns:ItemNumber>?</ns:ItemNumber>

<ns:Notifications>?</ns:Notifications>
<ns:CreatedTerminal>?</ns:CreatedTerminal>
<ns:CreatedTimestamp>?</ns:CreatedTimestamp>

<ns:ClosedBy>?</ns:ClosedBy>

<ns:ClosedComments>?</ns:ClosedComments>

<ns:ClosedTerminal>?</ns:ClosedTerminal>

<ns:ClosedTimestamp>?</ns:ClosedTimestamp>
</real:Diversion>
</soapenv:Body>
</soapenv:Envelope>
Now the third party sends a HospitalDiversionMessage in this format_
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns0="http://amb.com/cad/RealTimeService" xmlns:ns="http://schemas.com/cad/datamodel/divert/1.0.0">
<soapenv:Header/>
<soapenv:Body>
<ns0:Diversion>
<ns0:Action>?</ns0:Action>
<ns0:Open>?</ns0:Open>

<ns0:Location>?</ns0:Location>
<ns0:Type>?</ns0:Type>
<ns0:SubType>?</ns0:SubType>

<ns0:ExpiryTimestamp>?</ns0:ExpiryTimestamp>

<ns0:Comment>?</ns0:Comment>

<ns0:ItemNumber>?</ns0:ItemNumber>

<ns0:Notifications>?</ns0:Notifications>
<ns0:CreatedTerminal>?</ns0:CreatedTerminal>
<ns0:CreatedTimestamp>?</ns0:CreatedTimestamp>

<ns0:ClosedBy>?</ns0:ClosedBy>

<ns0:ClosedComments>?</ns0:ClosedComments>

<ns0:ClosedTerminal>?</ns0:ClosedTerminal>

<ns0:ClosedTimestamp>?</ns0:ClosedTimestamp>
</ns0:Diversion>
</soapenv:Body>
</soapenv:Envelope>
Questions*
1) I cannot figure out how the SOAPUI tool or SOA substitutes "real" as the namespace prefix for the WSDL based HospitalDiversionMessage and what I need to do at my end to match the message structure as per what the third party needs.
2) I need ns0 namespace prefix to whole of Diversion xml element. Currently it is "real" at top Diversion element and "ns" for its children
Please suggest, I can attach the other imported XSD if need be.
Thanks
Edited by: user5108636 on Jun 13, 2011 6:55 PM
Edited by: user5108636 on Jun 13, 2011 6:57 PM
Edited by: user5108636 on Jun 13, 2011 7:02 PM

Questions
1) I cannot figure out how the SOAPUI tool or SOA substitutes "real" as the namespace prefix for the WSDL based HospitalDiversionMessage and what I need to do at my end to match the message structure as per what the third party needs.The xml namespace suffixes like real and ns0 are just references used by the XML Parsers. For that matter the "real" can be xyz as well.
You dont need to make any changes as long as the xml namespace suffixes refer to the same namespace.
If you see the first soapUI xml and the third party xml have the same namespace references and hence it is not a problem:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:real="*http://amb.com/cad/RealTimeService*" xmlns:ns="http://schemas.com/cad/datamodel/divert/1.0.0">
<soapenv:Header/>
<soapenv:Body>
<*real*:Diversion>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns0="*http://amb.com/cad/RealTimeService*" xmlns:ns="http://schemas.com/cad/datamodel/divert/1.0.0">
<soapenv:Header/>
<soapenv:Body>
<*ns0*:Diversion>
2) I need ns0 namespace prefix to whole of Diversion xml element. Currently it is "real" at top Diversion element and "ns" for its childrenBased on this, logically both the xmls represent the same xml message. And hence you dont need to make any changes.
Please refer to the basics of xml namespaces using the following links:
http://en.wikipedia.org/wiki/XML_namespace
http://zvon.org/comp/r/tut-Namespace.html#Pages~Introduction
Let us know if you still need clarification.
Hope this helps.
Thanks,
Patrick

Continuing font encoding and tag issues with snow leopard and CS4oI

I am looking for help with a font handling issue with snow leopard and cs4 Indesign. Despite numerous calls and hours on the phone neither Apple nor Adobe has been helpful. I have had this issue open with Adobe since oct 5 but they remain totally unresponsive to date. I need to be able to use Type 1 fonts and do the following , export a pdf from Indesign with the following attributes: 1) xml tags for stories and objects. 2) have the fonts encoded as ansi and embedded.
Some additional information - exporting to ps is not an option as it destroys the xml tags. and doesn't guarantee that the fonts won't become CID or some other odd encoding.
As it stands now,
Leopard (10.5.8) and CS3 creates ansi encoded fonts with xml tags.
Leopard (10.5.8) and CS4 creates ansi encoded fonts with xml tags.
Snow leopard and CS3 creates ansi encoded fonts and xml tags
Snow leopard and CS4 creates custom subsetted fonts and some xml tags.
If any one has any advice on how to force specific font encodings from CS4 pdf exports so that i can preserve the tags and get the correct fonts I would be grateful.

The font encoding is not a function of the OS version, but rather of how a font is internally encoded and the content you are representing with the font.
If you are seeing a difference between MacOS 10.5 and 10.6 with the same Adobe software, it probably has something to do with use of a system font that is somehow different from one version of the OS to another. InDesign does not use any of the OS' font handling software.
Assuming that the fonts are embedded, subset or not, what is your issue with whether a font is ANSI-encoded, custom-encoded, or CID-encoded? It should make no difference for purposes of workflow beyond InDesign for software that adheres to the PDF specification (including all versions of PDF from 1.3 and up to 1.7 plus ISO 32000-1 PDF and all versions of PDF/X and PDF/A).
Neither InDesign or any other Adobe application provides user choices for the encoding since it shouldn't make a difference. The encodings chosen by Adobe's core technology components are for a combination of optimization and to support proper text search, copy, etc.
- Dov

Issue with opening PDF files from the web Acrobat 8.1.4

Hello everyone
I just found out about this problem today, and it manifests in such a manner that when you try to open a PDF document on the web, it hangs for a while, and then the standard message about Adobe Acrobat not being able to open the document comes up, and after you OK away that you get the message that the program shuts down.
If I download the PDF itself and open it locally it works. Is there any known issue with updates recently that creates this problem?
The system is running on Windows 7 32-bits, and Adobe Acrobat is a part of the CS3 Master Collection.
Greetings from Alexander

Not supported file type can (but not always) mean the PDF was created with an old enough version of Acrobat, that it isn't comaptible with reader X or XI.
Might have been damaged is pretty cut and dried in its meaning and interpretation.
There's a known issue with Mac OS and Safari Browser "breaking" PDFs as they download, but it's not so common for Windows. Since these are files you already had, it would be even less applicable.
You can try downloading an older version of Reader to check if it's a compatibility issue, but you'd have to uninstall the latest to do it and it'd be a lot of bother if they still don't open. It would also mean they are "broken" and cannot be repaired, that I know of.

Issue with opening .PDF files after recalling from Symantec Enterprise Vault

Good Morning,
I am having issues with opening PDF files that have been recalled from Symantec Enterprise Vault and some of the files are anywhere from 3-4 years old. Some files open, while others return the error: Adobe Reader could not open filename.pdf because it is not a supported file type or might have been damaged. It is inconsistent as to which files it occurs with. I am not ready to believe that I have that many corrupt files out there. I am opening them on a Windows 7 Enterprise SP1 x64 desktop. Adobe 10.1.7. I have already configured the registry setting for bValidateBytesBeforeHeader that I found in another article to no avail.
The files are on a network share, but I also tried copying them to my local desktop and still received the error.
I have seen other posts regarding this error, but do not see a definitive solution and am hoping that in recent days someone has come up with a solution.
Thank You
Brian Dougherty

Not supported file type can (but not always) mean the PDF was created with an old enough version of Acrobat, that it isn't comaptible with reader X or XI.
Might have been damaged is pretty cut and dried in its meaning and interpretation.
There's a known issue with Mac OS and Safari Browser "breaking" PDFs as they download, but it's not so common for Windows. Since these are files you already had, it would be even less applicable.
You can try downloading an older version of Reader to check if it's a compatibility issue, but you'd have to uninstall the latest to do it and it'd be a lot of bother if they still don't open. It would also mean they are "broken" and cannot be repaired, that I know of.

Issue with XML encoding

Hi,
I am querying an SAP instance for data, and I am getting back the data in an XML document...to which I need apply XSL transformation.
The instance is an German one... so I am getting a few strange characters because of which, the parser is uanble to apply the transformation.
I wrote a small java program to get more info on this particular character causing the problem, it turns out to be an ISOControl character. The properties (got by using the Character class API) are as below.
1. Character 1:
The getDirectionality is:0
The getNumericValue is:21
The getType is:2
The isDefined is:true
The isISOControl is:false
The isMirrored is:false
The isSpaceChar is:false
The isUnicodeIdentifierPart is:true
The isUnicodeIdentifierStart is:true
The isWhitespace is:false
2. character 2:
The getDirectionality is:9
The getNumericValue is:-1
The getType is:15
The isDefined is:true
The isISOControl is:true
The isMirrored is:false
The isSpaceChar is:false
The isUnicodeIdentifierPart is:true
The isUnicodeIdentifierStart is:false
The isWhitespace is:false
These characters appear to be white space in normal text editors...
This is how I am applying the transformation
TransformerFactory tFactory = TransformerFactory.newInstance();
Transformer transformer =
tFactory.newTransformer(
new javax.xml.transform.stream.StreamSource
(XSLURI)
StringReader sr = new StringReader(xmlToApply);
StringWriter sw = new StringWriter();
transformer.transform(
new javax.xml.transform.stream.StreamSource(sr),
new javax.xml.transform.stream.StreamResult(sw)
return sw.toString();
I have tried to use "UTF-8", "ISO-8859-1" and other encodings, but in vain. Appreciate any pointers on this...

Also the postings are from 2 different perspectives... this is to address the issue that I am facing with XML parsing and how to eliminate that using XML apis...
My other posting about a possible work around (encoding) for the problem creating string...

"Copy to clipboard" issue with Acrobat X and Skype extension in Firefox

This post is just to let you know that there is and issue with Acrobat X and the Skype extension in Firefox.
I don't know why but when both programs (Firefox and Acrobat) are opened and I try to copy something from a PDF I always get an error
message like "Impossible to copy into the clipboard. An internal error occurred".
If I close Firefox or I disable the Skype extension for Firefox everything runs smoothly.
It is really odd, I don't know if it is a problem of Acrobat, Firefox or of Skype....
Are anyone experiencing the same problem?
See you.
Alessandro.
Ps. I'm using Windows Vista SP2, Skype extension 5.2.0.7165, Acrobat 10.0.1, Firefox 3.6.16

Just found your post after getting the same problem with Google Chrome and Adobe Reader 10. It doesn't happen all the time but is annoying. If I switch Chrome off the problem is cured. Switch it straight back on and the problem reappears. It has only started after Skype was installed. Thanks for posting - I'll just switch Chrome off for now when I want to copy and paste unless a fix appears.

Issues with Exchange Account and Q10

Well, I hate to be writing this, but I'm hoping that there might be someone out there that can help get past some first day issues I am experiencing.
The background: I have a long history with legacy BlackBerry devices, and almost as much history with iOS devices. My most recent phone was an iPhone 4S, and I make extensive use of iCloud to keep my iMacs, iPhone, and iPad connected in real-time. The setup worked. It wasn't perfect, but it worked. However, because I used to have a BlackBerry device (most recent the 9930) and because I don't use the iPhone for more than e-mail, iMessage, and phone calls (generally speaking), I decided to give the newest BlackBerry device a shot. So I bought a Q10.
At this point I feel compelled to say that the hardware is everything I had hoped it to be. It's solid, has a good weight, and appears to be made very well. I have no complaints with the hardware, including the keyboard (a big selling factor for me), so I won't really get into the hardware as the issues I am experiencing all have to do with the OS. Let me also say that I am very familiar with the iCloud integration issues (missing Contact photos and disabled Calendar sync), so I'm not voicing a complaint over those issues in this thread.
I have connected my Exchange account. I used to have everything in Exchange before I moved my entire computing world over to Apple, and now I keep Exchange around for e-mail. Therefore, I have no contacts, no tasks, no notes, very limited calendar entries, and a massive amount of e-mail on the Exchange server. However, to test everything out, I have added a single contact record so I can see it show up on the phone and be able to test two-way sync between the Q10 and Exchange. And here is where the first issues crop up. It looks like Exchange connects and then disconnects at random. For example, if I open my Contacts on the phone, I see the one contact (called John Doe). Then, as the phone is sitting there with the screen on, the contact will disappear and I will see a "Start adding contact to your contact list" notice on the screen. Then, after a short period of time, the single contact will return. It is important to note that the entire time this is happening, the All Contacts option is selected in the list so that all available contacts are shown. Additionally, I have SIM card contacts turned off, but if I alter the selection in the view list (All Contacts, Favorites, etc.), the SIM contacts will re-appear when I return to the All Contacts view. At the same time, even though I have turned off SIM Contacts in the settings, the setting has reverted to show SIM Contacts. If I turn off the setting again, SIM Contacts still show up. Possibly related: I can't delete contacts on the SIM card, no matter how many times I try, and it now it seems that I can't get SIM Contacts to go away in the Contacts app.
Likewise, Exchange seems to connect and disconnect from Calendar. I go to the calendar and move day by day to June 15th. I see an entry that I know is from Exchange (I have no other connected calendars at this time), and it is in blue. I change the calendar color to green and the entry changes color, as expected. However, if I jump back to today and then scroll day by day to get to June 15th again, the calendar entry is missing. After a few seconds, the entry re-appears, but it is, once again, in blue. The setting has reverted itself, and it seems like Exchange is completely disconnecting and automatically reconnecting to the phone like I am setting it up again for the first time. Very odd. As I'm typing this, I just saw something odd. I swiped to wake up the phone, and the active frames screen was the visible screen. The calendar app is still running (since I left it running, minimized, when the phone went to sleep) and the date shown in the active card was Jan 1, not Jun 8. Why? The date (and time) on the phone is correct and is set automatically by the cellular system.
Nevertheless, looking at BlackBerry Hub, I see only two e-mails in my Inbox from Exchange, even though I have roughly a dozen in my Inbox. The rest are filed in sub-folders. And bam! Just like that... I get the "Add Accounts" screen while looking at the Hub. In other words, as I was typing this, I first saw two Exchange e-mails and then, out of nowhere, the e-mails disappear and I see the "Add Accounts" screen as if no account has been connected.
So... first question: Is anyone else experiencing this issue? This is very strange, and very frustrating. Second: could this be related to the large amount of e-mails I have stored on Exchange, some of which have large attachments? I selected "Forever" as the sync history length. I have my concerns, however, if this is related to loading historical e-mails onto the phone (in other words, the first sync with Exchange) because there is no reason that I can understand that the phone would blank out as if no account was connected at all. I can understand lag and stuttering while the history is syncing, but not a complete disconnect and reconnect. Considering all of the issues with the one and only contact record disappearing, the calendar entry for Jun 15th disappearing and then reappearing with the wrong calendar color, and e-mail in my Inbox incomplete (two of a dozen e-mails) and ultimately disappearing, I feel like this OS just has some real, significant issues.
Full disclosure: I do want iCloud to work and am a fan of Apple products, but the lack of full iCloud sync support is not a big enough issue for me to want to send back this phone and/or see it fail so miserably. I will happily move my info from iCloud into Exchange, Google, and/or set up a new Exchange account for personal use (Office 365) because I am not wedded to iCloud per se. But, I won't go through that trouble if I can't even get my first account to work properly. It should also be noted that I do have a basic Google account (non-paid) and I had previously attempted to connect to it. However, I was experiencing the exact same issues with contacts disappearing, e-mail disappearing, etc. So I deleted that account. Truth be told, I deleted the Exchange account as well, and then re-connected to Exchange only to test one account at a time. Unfortunately, even with Exchange only, I am seeing very strange and frustrating behavior as described above.
Help... please. I want this to work but the frustration I am feeling is growing worse by the hour.
Model: SQN100-2
OS Release: 10.1.0.2011
OS Version: 10.1.0.2038
Build ID: 525050
Ian

To follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

That's what I would have thought, but even after saving the setting, as soon as I shut down my computer or log out of Mail, it automatically defaults back to 25. It's a bit frustrating.
Now I just need to figure out how to get rid of those horrible pop-up banners but still have my glass sound and number of emails in the red dot when I get an email...
These little tweaks are the only thing I HATE about upgrading my OS.

I am having major issues with Logic 8 and want to reinstall.

I am having a lot of issues with Logic 8 and want to do a re-install. What is the procedure and what do I need to uninstall first. I need to be careful, because I don't want to affect my Logic 7.
Any suggestions?

What problems?
The first thing to do is trash the preferences. As far as affecting Logic 7, once you install 8, 7 is "forgotten" about. I'm assuming your L8 is a real version, not a "borrowed from the interweb" one.

I have an issue with some PDF documents some MS Office documents, notably MS Word when received in eMail as attachments not displaying on iPhones, iPad 2s

Hi,
I have an issue with some PDF documents & some MS Office documents, notably MS Word when received in eMail as attachments not displaying properly on iPhones, iPad 2s & new iPads?
PDF docs - areas of the doc only show as grey splotches regardles of viewer
MS Word Docs -
inserted graphics don't display at all,
tables & lists especially with borders are broken &
tables & lists missing the borders &
tables & lists missing the 1st 1-2 lines of the lists/tables.
This is replicated on iPhone 4s, iPhone 4Ss, iPad 2s, iPad new (x2)
It certainly happens in iOS 5.1.1 & iOS 5.1
We believe it all worked aok in iOS 5.0.1(?) & prior
There is no problems reading/seeing these PDF & Word docs on anything other than iDevices.
This is rather critical for us & if not quickly fixed/rectified will prevent us from further purchases of these devices
Rolling back to iOS 5.0.1 or prior I believe isn't possible because of the BaseBand update(?) & isn't much of an option because of the quite noticeable Battery/Charging/WiFi improvements in 5.1 & 5.1.1

Hi,
I logged a call with AppleCare & have since had explained why this occurs (some time ago)
I'll try to explain what was indicated to me.
iOS has a limited Font Set & this affects what PDFs can display. You need to use iOS supported fonts in your PDFs to see/read them properly
These supported fonts are indicated here => http://support.apple.com/kb/HT4980
Regards MS office docs, iOS doesn't have much of an API to work with MS Office documents at all so is stuck with 3rd Party Apps to try to do it.
Unfortunately Mail in/on iOS uses the API to attempt to open/use MS Office attachments unless you tell it to use an App to open the attachment.
I have had success opening & reading MS office docs now with CloudOn, but find it slow & very awkward to use.
Not too sure if this helps others, but at least it explains why this is occurring

My itunes account shuts down for no reason. It wont recognize my iphone and there is an issue with network connectivity and itunes. I have already reinstalled itunes and did a syste restore on my computer, firewall checked and virus scan done. Ideas??

My itunes account on windows xp shuts down for no reason. If even try to delete something from my library it shuts down. It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store. I have already reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done. Ideas??

Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

Issue with XML PDF and AdobeDesigner!

Similar Messages

Maybe you are looking for