Issue Xcelsius installation Ehp1

Hi guys,
We have just installed BO XI 3.1 enterprise including Xcelsius.
We are in BW 7.0 SP 15
When we try to launch a BW connection from Xcelsius, we encountered an issue : error message like following appears "You need to be in version 7.02 or higher"
After searching in the documentation we noticed that Ehp1 SP 5 is mandatory to use connectivity between BI and Xcelsius.
Installing Ehp1 on our system will require numbers of functional and technical tests
Do we have alternative choice ?
Thanks for your advise
Regards

Hi,
SAP NW BW 7.01 SP05 is one of the prerequisites to use direct connection to BEx queries (SAP NetWeaver BI Connection). If you use QAAWS or any other connection type to get the data, there's no such an obligation.
Regards,
Erdem

Similar Messages

I am trying to install MasterCollection_CS6_LS16. When I click the install file I get this error message: We've encountered the following issues. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation.

I am trying to install MasterCollection_CS6_LS16. When I double click the install file I get this error message: We've encountered the following issues. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation. What does that mean? How should I proceed?

Hey iraravitz,
Could you please let me know what version of OS are working on.
You might receive this error when you attempt to install on a drive with the HFS+ Case Sensitive file system, which is not supported for installation of Adobe Creative Suite 6.
So, please try installing on a drive that has been formatted with a supported file system.
You might refer the KB doc link mentioned below for the same:
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Let me know if this helps.
Regards,
Anubha

Data Refresh on .swf file without Xcelsius installation.

Hi
This is the case:
I have made a dashboard for my Boss with Xcelsius 2008. He was impressed.
I put the .swf and the .xls files in a folder on his pc's desctop.
Now he wants to be able to refresh the .swf on demand with a button or something else, when he changes the .xls.
There is no Xcelsius installation on his pc.
Is there any solution? free or not!
Thanks.

Take a look at this thread.
xcelsius xml map connection error [local xml file]
He is trying to refresh dashboard from a local file. You can think about keeping your xml at a network location which is accessible from Boss's machine and use the excel xml map connection to get it refreshed.
You can also write some scheduled program which will refresh the xml file on daily basis.
Anil

RAM issues after installation (Late 2009 iMac)

I was trying to upgrade a late 2009 iMac computer from its original RAM of 4GB. I purchased 8GB of memory from Corsair off Amazon (http://www.amazon.com/Corsair-Channel-204-Pin-SO-DIMM-CMSA8GX3M2A1066C7/dp/B0050 5EZYW/ref=sr_1_6?ie=UTF8&qid=1403201294&sr=8-6&keywords=mac+memory+notebook+8+gb), which, despite saying is "Notebook Memory" in the description, there are numerous reviews stating that it works in late 2009 iMacs and the packaging itself says it will work with iMacs. I've installed memory before on two other Macs, including another late 2009 iMac (from 4GB to 8GB), but have had issues with this most recent installation. Like I said before, the computer originally had 4GB of memory, with 2x2GB cards in their original slots (the two slots closest to the stand). So, I installed the 2x4GB cards in the bottom two slots (slots closest to the display).
Upon rebooting the computer, I get a single loud tone, repeated every 5 seconds, which, according to other support articles, means that there is no RAM installed. I took out the RAM cards and tried various installations, and can't even get the original two cards, by themselves and in their original slots, to work. I'm pretty sure I am installing them correctly - I don't hear a loud click when I slide them into place, but the fit definitely feels snug and can hear them shift into place, plus I get a nice click when I've popped them out with the tabs.
Other things to note - there seems to have been a fair amount of dust when I first removed the plate where the memory is held, but that was easily blown away, but I could have possibly lodged dust further into the slot. But I highly doubt that is the issue. I installed it on a carpeted floor to protect the screen, which looking back could mean there was a slight static charge, but am not sure if this would result in damaging the cards to the point where the computer does not recognize them anymore. I didn't realize this till after the first failed installation, but there was a refrigerator-type calendar magnet (very, very weak) on the front of the computer that I am wondering might also have something to do with the issues.
I could try installing the RAM on the other late 2009 iMac but don't want to risk ruining another computer...
Please let me know if there's any additional information I can supply. I wanted to include any possible sources of issues so I can pinpoint exactly what caused this to occur, or if there's something I am simply not doing correctly.

Not sure if it's a permanent solution, but found something that works. Not sure exactly how the locking mechanism for the cards work, but I had an idea that possibly one side was seated poorly, causing the issue to occur. I therefore tried two cards on the left side, found that didn't work, and tried two cards on the right side, and that did work. I tried two cards on the right side, with one card either in the top left corner or top bottom corner, and the top left corner worked, but caused the computer to start beeping again shortly after turning on. Took out that card, restarted the computer, and now it works fine, albeit with less memory than I originally wanted. It did once run into an issue shortly after turning on when it did 3 short beeps, 3 long beeps, and 3 short beeps. I saw an error online with the inverse (3 long, 3 short, 3 long), but couldn't find a definitive answer for what my particular pattern meant (someone said it was a logic board error). Anyway, I left it by itself as I looked for an answer, and in the meantime it restarted again and ended up fixing itself.
Not exactly sure if this will start another series of issues, but that seems to work in the meantime.

General issues during Installation

Hi Experts,
What are issues generally we are facing during installation of data sources and loading of data in to DSO or Cube.(with real time example).
and how that can be solved?
Regards
Tapashi saha

Hi
Discussed so many times.
While installing the BC DS based on the Data flow the error occurs, Normally the Shortdump if you select much Object at Grouping with Dataflow before after based on the time lines.
The Connectivity / RFC issues between the systems
The Data Init fails due to data inconsistencies.
Hope it helps and clear

Issue in Installation of EBS R12 through VNCserver thrgh Putty

Hi Guys,
I know this may sound quite childish but still i wanna know If we are Installing EBS R12/11i by connecting the Linux box through putty OR by connecting through VNC server .
If we r connecting through putty do we 've to set the Display in this case.
Or if If we r connecting through VNC Server do we 've to set the Display variable.
My query is what is the Differences between using VNC server & putty in Installation of EBS r12/11i.
Today my Boss pointed out that i should install vnc server on windows for installing EBS rather than using putty as it required setting of Display variable.
which i couldn't quite understand. Hence the query !!
Really Appreciate if u could explain it a little bit more.
Thanks & Regards
MZ.

I know this may sound quite childish but still i wanna know If we are Installing EBS R12/11i by connecting the Linux box through putty OR by connecting through VNC server .
If we r connecting through putty do we 've to set the Display in this case.
Or if If we r connecting through VNC Server do we 've to set the Display variable. You cannot set DISPLAY when using putty so you will have to use VNC.
My query is what is the Differences between using VNC server & putty in Installation of EBS r12/11i.
Today my Boss pointed out that i should install vnc server on windows for installing EBS rather than using putty as it required setting of Display variable.
which i couldn't quite understand. Hence the query !!
Really Appreciate if u could explain it a little bit more.To run Rapid Install you need to have the DISPLAY set properly to see RapidWiz, and this would work with VNC (not with putty). If you can set the DISPLAY is putty (issue xclock to verify) then you can use it (which I believe is not possible).
Thanks,
Hussein

Configuration of EPM 11.1.2 Shared Services issue during installation

Hi,
I am running into issue with configuration of Shared Services after installing EPM 11.1.2 on my machine. I am running the installation on Windows 8 and 64 Bit. All of the components that I wanted installed successfully. After that I went into the Configuration for Shared Services, I ran into the issue with the status of Deploy Application to Server not completed successfully (configuring...). I was hoping to configure one thing at a time as suggested in the blogs.... then I'd configure Essbase and not Financial Reporting...in that sequence. Thus, I also do not see any of the services installed under Foundation Services; Shared Services URL, Start EPM nor Start FoundationServices (Oracle Weblogic 10) tmplink.
I've tried to search online but found nothing specific on the issue. Am I missing something? Please help.
Thanks

Windows 8 has not been officially released yet so don't expect EPM products to support it.
Cheers
John
http://john-goodwin.blogspot.com/

IPhone 4 AirPrint printing issue (AirPrint Installer 1.3 for Windows)

I have been trying to get AirPrint working on my iPhone 4 (CDMA/Verizon) for a while now without success
I know that the AirPrint feature is designed to work with AirPrint compatible HP WiFi printers (as Apple dropped support for OS X), though I have no plans on buying a new printer when I have 2 perfectly fine printers shared on the network, let alone one specifically designed to work with AirPrint
I have tried out AirPrint Installer 1.3 for Windows (running on WinXP MCE 2005), but can't seem to get it to work properly
After installing AirPrint Installer, I was able to see one printer from the iPhone (from a laser printer shared from another computer on the network), and was able to send a print command from the iPhone to the XP MCE computer, but I kept getting "Error-Printing" from the print que (on XP MCE)
After sharing a printer connected locally (via USB), I was able to print from my iPhone once successfully, but nothing from the iPhone would show up in the que on XP MCE since
Since then I have also shared the Microsoft XPS Document Writer (saves "printed" documents to an XPS file) as a way to tinker around with AirPrint without wasting paper, ink, and/or toner, and was unable to print from it
Now whenever I attempt to print from my iPhone, I have the option of 3 printers, the shared laser on a different computer on the network, the local inkjet via USB, and the Microsoft XPS Document Writer, selecting any of them will then give me a message with an image of a piece of doggy eared paper saying "Printing to "<Printer Name>" Sending to Printer" as if it's about to print, but there is no change on XP MCE, the print cue shows nothing, and nothing prints and I don't get a popup asking where I would like to save (when using the XPS Document Writer), yet I can print fine from the computer itself
Also, I have noticed that after a while, the printers will disappear from the list (on the iPhone) one by one, and I have to constantly uninstall and reinstall AirPrint Installer, only for it to not work again
Am I doing something wrong? I have updated iTunes, I don't have a software firewall, and I am pretty sure I have installed AirPrint Installer 1.3 correctly
I have also tried using AirPrint Activator and AirPrint Hacktivator on my MBA, but I only have Leopard on it (haven't upgraded to Snow Leopard yet, and may not for a while), so AirPrint Hacktivator will close unexpectedly (constantly), and AirPrint Activator gives me an error saying I need at least Snow Leopard, so I would really appreciate it if I could get AirPrint Installer 1.3 to work

I have been having exactly the same problem as Mike's original problem as well as this problem as well. Originally, i couldn't get the iphone to see all my shared printers. I have an Epson RX580 ink jet all in one printer and a HP P1006 laser jet printer. They are both shared printers. Both are able to be printed to from other wired and wireless computers in my network. They are both showing as ready when I look at them in the printer/fax window.
I'm using Window's XP SP3 with all the latest updates. I originally down loaded a german version of this AirPrint Installer 1.3. It didn't have all the bells this version does. After DL'ing this version AirPrint Installer 1.3, My Verizon Iphone 4 with 4.2 OS could see the printers on my network.
When I try to print an email or picture. I takes me to the screen on the iphone to choose the printer I want to use. When I choose either printer and click the "Print" button, it takes me to a screen that says "Communicating with Printer" with an image of a page of paper with the edge turned down. After about 30-45 seconds the screen reverts back to the email or picture. After another min or so, a message will pop up saying that the printer is offline with one button that says cancel and another button that says continue.
If I look at the print que for the printers, there is nothing in the que, but when I high light the printer in the printer/fax window some extra options become available that aren't there if there are really no jobs in the cue. One of the options on the left is the option to cancell all print jobs. When I click this, the computer looks like it does something cause the screen kind of flickers and then the option dissappears.
I would really like to be able to print pic's straight from my iphone and would love to get this working. Would really appreciate any help with this issue.

MariaDB, PHP, and mysql_connect() issue on Installation scripts

I searched for this issue and turned out nothing..
I am using an installation script on my web server and i get this error:
function mysql_connect() not found:
Your system does not appear to have mysql available within php
I followed the wiki and have uncommented the following lines
extension=pdo_mysql.so
extension=mysqli.so
extension=mysql.so
I have also restarted the httpd daemon several times. I am using MariaDB because I know arch is dropping mysql. I followed the MariaDB wiki too and have it set-up properly.
Here is my "mysqli" section of phpinfo()
MysqlI Support enabled
Client API library version mysqlnd 5.0.10 - 20111026 - $Id: e707c415db32080b3752b232487a435ee0372157 $
Active Persistent Links 0
Inactive Persistent Links 0
Active Links 0
Directive Local Value Master Value
mysqli.allow_local_infile On On
mysqli.allow_persistent On On
mysqli.default_host no value no value
mysqli.default_port 3306 3306
mysqli.default_pw no value no value
mysqli.default_socket /var/run/mysqld/mysqld.sock /var/run/mysqld/mysqld.sock
mysqli.default_user no value no value
mysqli.max_links Unlimited Unlimited
mysqli.max_persistent Unlimited Unlimited
mysqli.reconnect Off Off
and here is "mysqlnd" in phpinfo()
mysqlnd
mysqlnd enabled
Version mysqlnd 5.0.10 - 20111026 - $Id: e707c415db32080b3752b232487a435ee0372157 $
Compression supported
SSL supported
Command buffer size 4096
Read buffer size 32768
Read timeout 31536000
Collecting statistics Yes
Collecting memory statistics No
Tracing n/a
Loaded plugins mysqlnd,example,debug_trace,auth_plugin_mysql_native_password,auth_plugin_mysql_clear_password
API Extensions mysqli
MySQL is running as I have set-up a database and user for this installation script.

I dropped to the command line and tried to run php and realized that mysql.so was named mssql.so..
so for anyone that has this issue, when you install php, unless they change it next release, that's a typo you have to fix when uncommented the mysql extension
Last edited by evil (2013-03-31 19:34:12)

Xcelsius Installation and Configurations

Hi Experts,
Could anyone help me how to install and configure Xcelsius and work on this ? I am very new to this tool and need to develop some reports and publish in SAP and SP portals.
Regards,
Suresh

Suresh,
There are numerous posts related to this in this forum, you can use Search forum option for anything you are looking for.
Below is the link for the installation guide.
http://help.sap.com/businessobject/product_guides/xcelsius2008SP2/en/sp2_xcelsius_install_en.pdf
-Anil

Post-Install Issue - Windows Installer runs every time CRW XI R2 loads

I have XP SP3. If I uninstall CR XI SP2 and re-install CR XI from cd, it loads perfectly - no windows installer. When I uninstall CR XI, and re-install CR XI SP2 from the saved download on my harddrive, the Windows installer runs every time I load it; it seems to think it's never been run before. Takes 3-8 minutes to load every time, which is completely annoying.
I have also tried downloading that full build of XI SP2 3 times - and uninstalling/reinstalling. Makes no difference.
I know this is not a design issue, but I didn't know where else to turn. I have been tolerating this issue for about 18 months and I can't take it any more!
Thanks!

Hi,
Please try using other computer units then update me the result, the purpose is to check if your unit OS may be the problem.
Regards,
Clint

IP Profile issues since installation. *At a loss* ...

Hi all, sorry that my first post is such a sucky subject
anyway...........
Had option 3 installed on 22nd May and initially understood and respected the 'stabilisation period' thingy
however since installation I have never had any speed above 2mbps.
Obviously ive tried helpdesk etc numerous times.
And despite personal assurances and promises, the problem still exists.
Basically bt speedtests show that my line is more than capable of 7+ mbps (only approx 400m from exchange)
but my IP Profile is 2mbps
its been 'reset' numerous times (although I have never seen any changes)
I have contacted technical at least 5 times since installation regarding this but the result is always the same ....tests......promises.......wait a week for 'stabalization'.........no change.
Some screenies.....
Seems to be a huge number of events/errors.
Im at a loss because nothing that anyone does seems to fix or even slightly improve the issue.
Please any help or suggestions greatly appreciated.
Leigh.
Solved!
Go to Solution.

your profile is stuck at 2mb and as you have 3+ days conenction time showing a stable line you need to contact the mods to get it kicked into action your profile should be 7.15mb not 2mb
contact mods
can take up to 3 working days for mods to contact you
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Abort issue with installation CS6 (payloads)

Dear all,
Since I wanted to find out if CS6 products would pay out I wanted to install the trial version of the CS6 (MC) but got the below mentioned error messages during insallation process of PremierPro, Aftereffects, Indesign, Illustrator.
I thought it would come form permission issue in the registry but what makes me wonder is that the reg key in brakets (I think that is the key name) is not found in my registry hive.
I worked with CS5 since long time smoothly, never had such an issue.
--> My system for the Trial: Win7 /64bit / AV and Firwall disarmed for installation/ working as Admin / Highend HW
Any Idea what interrupts the installation of the payload units?
What does these Payloads require to settle? What are they good for?
Thanx
----------- Payload: {08D2E121-7F6A-43EB-97FD-629B44903403} Microsoft_VC90_CRT_x86 1.0.0.0 -----------
ERROR: Install MSI payload failed with error: 1603 - Schwerwiegender Fehler bei der Installation.
MSI Error message:
----------- Payload: {9E0AF030-AC6B-11E0-8837-00215AEA26C9} Microsoft Visual C++ 2010 Redistributable Package (x86) 10.0.40219.1 -----------
ERROR: Failed to install Microsoft Visual C++ 2010 Redistributable Package (x86). Please try installing it by double clicking on the executable at "D:\Softwarebibliothek\Webdesign\CS6 Master Collection\Adobe CS6\payloads\Microsoft VC 2010 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x86) from Microsoft website - www.microsoft.com
----------- Payload: {9C4AA28F-AC6B-11E0-8997-00215AEA26C9} Microsoft Visual C++ 2008 Redistributable Package (x86) 9.0.30729.4148 -----------
ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x86). Please try installing it by double clicking on the executable at "D:\Softwarebibliothek\Webdesign\CS6 Master Collection\Adobe CS6\payloads\Microsoft VC 2008 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x86) from Microsoft website - www.microsoft.com
----------- Payload: {9D2A060F-AC6B-11E0-8C00-00215AEA26C9} Microsoft Visual C++ 2010 Redistributable Package (x64) 10.0.40219.1 -----------
ERROR: Failed to install Microsoft Visual C++ 2010 Redistributable Package (x64). Please try installing it by double clicking on the executable at "D:\Softwarebibliothek\Webdesign\CS6 Master Collection\Adobe CS6\payloads\Microsoft VC 2010 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x64) from Microsoft website - www.microsoft.com
----------- Payload: {9B78FAB0-AC6B-11E0-8EF3-00215AEA26C9} Microsoft Visual C++ 2008 Redistributable Package (x64) 9.0.30729.4148 -----------
ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x64). Please try installing it by double clicking on the executable at "D:\Softwarebibliothek\Webdesign\CS6 Master Collection\Adobe CS6\payloads\Microsoft VC 2008 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x64) from Microsoft website - www.microsoft.com
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Microsoft_VC90_CRT_x86: Install failed
ERROR: DW050: - Microsoft_VC80_CRT_x86: Install failed
ERROR: DW050: - Microsoft Visual C++ 2008 Redistributable Package (x64): Install failed
ERROR: DW050: - Microsoft Visual C++ 2008 Redistributable Package (x86): Install failed
ERROR: DW050: - Microsoft Visual C++ 2010 Redistributable Package (x64): Install failed
ERROR: DW050: - Microsoft Visual C++ 2010 Redistributable Package (x86): Install failed
ERROR: DW050: - Adobe SwitchBoard 2.0: Install failed

Sorry - I missed to say that I had tried to install them manually but it failed the same way - what could be the reason? (And I also downloaded the once that where suggested for download)
Which areas of Windows need to be accessed here for the installation?

Issues with installation and Error codes afterwards ...

So this morning getting on my computer I was going to watch youtube videos, and it popped up saying that my adobe flash player was out of date.
Fine and all, I went to update, and when the .exe finished downloading I launched it, and the Adobe Flash Player installer popped up, and its was blank, didnt do anything.
I did some searching around and found that a way around it is downloading the offline installer, which a member of this board posted links to very often. But everytime I tried following these links it was giving me a 404, so I did some searching around, ended up a the download center Adobe Flash Player - Downloads and downloaded this one : Download the Windows Flash Player 15 Plugin content debugger (for Netscape-compatible browsers) (EXE, 16.84 MB)
It installed just fine, my videos and .swf files loaded again.
But now I've run into another issue, when I load a youtube video up, I get a couple error codes, here they are
Error #2044: Unhandled IOErrorEvent:. text=Error #2036: Load Never Completed.
Now, I've googled these errors, and looked at the help section on this site, and both of these have nothing to do with the issue I'm having, they seemingly pop up for no reason, when I hit dismiss all or continue the video plays just fine. But I would really rather not have to deal with this popping up every single time I go to watch a video.
I dont know if it has something to do with plugins I'm using or the browser, I'll do some more tests meantime but I'll list what Im running below :
Windows 7 Ultimate 64 bit
Using the Opera Web browser
The only extension that I believe could be causing an issue, is Youtube Center, but the only thing that really changes is the way the video loads, I'll try disabling it and seeing if that changes it but I'm confident thats not the issue here.
If someone could help me out with this I would really appreciate it.

useduser wrote:
Error #2044: Unhandled IOErrorEvent:. text=Error #2036: Load Never Completed.
You get this because you installed the debug player. Uninstall it, and install the standard players from
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)

Issues running installation file

I've downloaded the universal 32-bit installer for Windows on my PC which is a 32-bit system running Windows 7. When I attempt to run the file I get an error message that says that the file doesn't support 32-bit Windows systems. Is there another file I can download or are there other issues with my PC?

Try downloading the installer(s) from http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header

Issue Xcelsius installation Ehp1

Similar Messages

Maybe you are looking for