Issues access Windows server file share

I have a Windows 2008 R2 server that I have a folder shared.  On most computers I can access the share but on some computers I get a message that says "K:\ drive not accessible.  Incorrect Function"  I have two laptops right now
in front of me that are the same and have the same image, one can access the share and one cannot.  I am logged on to both as the same user.  I have been comparing all of the settings on both laptops and they are all the same.
What does the error "incorrect function" mean?
Thanks,
Andrew

Hi,
Please refer to the similar thread below:
Drive is not accessible - "incorrect function"
Note: Microsoft is providing this information as a convenience to
you. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
In addtion, please check if it is due to a collision with the existing mapped network drive.
Best regards,
Susie

Similar Messages

  • Mavericks permission issues with Windows Server deduplicated shares.

    We have a number of 10.9-10.9.3 - Mavericks - machines installed throughout our facility. Much of the user content is pulled from shares stored on our Windows Server 2012 fileservers with deduplication enabled. I have found that files newly written or unoptimized are able to be accessed without issue - read, written, modified, etc. Once the file gets optomized/deduplicated and Windows adds the P & L attributes - sparse and symlink - the Macs running Mavericks begin to have access issues.
    Once the files get deduplicated, users begin receiving read access errors when copying files (see error1 below). This happens when copying to folders within the current folder tree or copying somewhere to the local system. If you 'stop' the copy operation and retry a few more times, it may eventually work for the specific instance but fail again later. I am however, able to copy these files without issue via the terminal.
    Other systems running 10.7 do not experience the same issues and are able to access file server resources without issue. Many of the systems having issues are newer and thus not able to be downgraded to 10.8 or 10.7.
    I have tried finder replacements such as Pathfinder but the results are the same. I know this is at least similar to the issues many Mac users are already experiencing and posting about but I haven't seen it directly linked to deduplication and the attributes written by Windows server. Has anyone seen this issue? Have any solutions been found? 
    Error 1:
    When copying files after the PL attributes have been set by deduplication.
    "One or more items can't be copied to "Foler" because you don't have permissions to read them.
    Via the system.log, I am also seeing the following error when accessing these deduplicated file shares. The reparse point tag listed below is "IO_REPARSE_TAG_DEDUP"
    Reported error:
    "smbfs_nget: filename.ext - unknown reparse point tag 0x80000013"

    This is a 'known problem' as discussed on the MacWindows site, see http://www.macwindows.com/More-on-OS-X-conflicts-with-Windows-Server-Deduplicati on.html
    It appears to still affect Mavericks 10.9.5 at least from the lack of any positive reports to the contrary. It is perhaps a bit late but it would have been worth signing up for the public beta of Yosemite and testing that and if needed reporting it as an issue for Yosemite as this will be getting more bug fix attention than Mavericks now.
    I would agree turning off de-duplication is not a desirable solution, however other possibilities to consider are installing the standard Samba software on a Mac and using that instead of Apple's SMBx software. This is done by using the SMBup installer See http://eduo.info/2013/07/13/smbup-faq it does not officially list Mavericks but I did see at least one report that it still worked. A second possibility is to install ExtremeZ-IP which installs an AFP server on to your Windows Server and also gives the bonus of supporting Spotlight searches.
    Note: You should only try SMBup on a test setup first.

  • Unable to access server files shares with Active Directory Users

    Quick breakdown of my issue.
    I have setup a Yosemite file server running the latest version of Yosemite and Server.
    File sharing in Server.app is enabled and shares have been created
    The server is bound to my company's Active Directory and you can directly login to the computer via AD credentials.
    The big issue is this, unless the user has directly walked up to my server and logged into it at least once, they cannot authenticate to the file shares via their AD credentials.
    For example: Administrator (me) I can login and access all file shares without issue.
    Jane Smith (SMITH) who has actually walked up to my server and logged in via her AD credentials, can also access all file shares. (That she has access to)
    John Doe (JDOE) who has not logged into the server in anyway, cannot authenticate to the server file shares  at all (even though I have granted him permission) He just gets an "Access Denied" message.
    I have gone into Directory Utility and changed the search order to give AD priority and this still doesn't resolve the problem.
    We have unbound the server from AD and added in back again and still not able to resolve.
    If you open Server.app and go to add someone from AD to a file share, it finds the AD user quickly and everything looks right. but still unable to authenticate to the server if they haven't directly logged into it before?
    All of the documentation and google articles I have found say my server is setup correctly, any help would be greatly appreciate it!
    Thanks in advance!

    I figured this out. In Mountain Lion Server, it doesn't matter if you give the user rights to a shared file or folder, if the user doesn't have access the File Sharing service, they can't get it. I had to find the specific users in the Server app under the AD in the Users tab, and give them rights to the File Sharing service. I think you can do this for a whole AD group as well, but I haven't tried.

  • Windows 2003 File Share 4 node Cluster: Does Cluster Resources need to be brought offline prior removing / unmapping any LUN's from SAN end?

    Hello All,
    Recently, on a 4 node Windows 2003 File Share Cluster, we encountered a problem where when trying to remove few shares (that were no longer in use) directly from SAN end crashed the entire Cluster (i.e., other shares also lost their SAN connectivity). I
    suppose the Cluster resources need to be brought offline prior removing it from SAN but I've been advised that these shares were not the root and instead a 'mount point' created within the share; and hence there is no need of bringing down any Cluster resources
    offline.
    Please can someone comment on the above and provide me detailed steps as to how we go about reclaiming SAN space from specific shares on a W2003 Cluster?
    p.s., let me know if you need any additional information.
    Thanks in advance.

    Hi Alex,
    The problem started when SAN Support reclaimed few storage LUNs by unmapping them from our clustered file servers.  When they reclaimed the unused LUNs, other SAN drives which were there also disappeared causing the unavailability of file shares.
    Internet access is not enabled on these servers. Servers in question are running 64-bit Windows Server 2003 Sp2. This is a four node file share cluster. When the unsued LUN's were pulled, the entire Cluster lost its SAN connectivity. Windows cluster service
    was not starting on any of  the cluster nodes. To resolve the problem all the four cluster nodes were rebooted after which cluster service started on all the cluster nodes and resources came online.
    Some of the events at the time of problem occurrence were,
    Event ID     : 57                                                      
    Raw Event ID : 57                                                      
    Record Nr.   : 25424072                                                
    Category     : None                                                    
    Source       : Ftdisk                                                  
    Type         : Warning                                                 
    Generated    : 19.07.2014 10:49:46                                     
    Written      : 19.07.2014 10:49:46                                     
    Machine      : ********                                             
    Message      : The system failed to flush data to the transaction log.   
    Corruption may occur.                                                  
    Event ID     : 1209   
    Raw Event ID : 1209                                                    
    Record Nr.   : 25424002                                                
    Category     : None                                                    
    Source       : ClusDisk                                                
    Type         : Error                                                   
    Generated    : 19.07.2014 10:49:10                                     
    Written      : 19.07.2014 10:49:10                                     
    Machine      : ***********                                             
    Message      : Cluster service is requesting a bus reset for device      
    \Device\ClusDisk0.                                                     
    Event ID     : 15     
    Raw Event ID : 15                                                      
    Record Nr.   : 25412958                                                
    Category     : None                                                    
    Source       : Disk                                                    
    Type         : Error                                                   
    Generated    : 11.07.2014 10:54:53                                     
    Written      : 11.07.2014 10:54:53                                     
    Machine      : *************                                            
    Message      : The device, \Device\Harddisk46\DR48, is not ready for access yet.                                                            
    Let me know if you need any additional info, many thanks.

  • Windows server 2008 R2 x64 Authentication failure while try to access Windows server 2003 R2

    Hello,
    I try to access Windows Server 2003 R2 Standard from Windows Server 2008 R2 x64 standard using integrated windows authentication . And because my application tries to read SQL server i'm getting and error that user is not trusted. Then I tried to open a
    simple shared folder on  2003 and none of the users is able to do it. Both servers are part of common workgroup in the same IP range. Using domain is not an option. Migrating 2003 to 2008 is not an option either. The specific DB provider I have to use
    supports only windows authentication, so creating user into SQL server is not an option too. I have tested many applications and cases which requires/uses windows authentication and non of the manage to connect.
    Any help is very welcome because things are urgent!
    Authentication failure

    That method in workgroup mode may be a problem.
    Authentication in SQL Server
    Might ask them over here.
    SQL Server forums on
    MSDN
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Hp laserjet pro mfp m126nw printing issues in windows server 2008 r2 standard

    hp laserjet pro mfp m126nw printing issues in windows server 2008 r2 standard
    printer  installed but print not coming ...
    please give me solutions of this problem

    go to http://www.hp.com/go/tools may help resolve the issue.
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    I work on behalf of HP.

  • Accessing presentation server file in background

    Hi gurus,
    my requirement is to access presentation server file in background mode.
    I got the below documentation regarding this ,but i'm not able to complete the setup as mentioned in this document.
    please help .
    [https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/communication%20to%20presentation%20server%20in%20background%20mode.doc]
    As per documentation i need rfc.car and car.exe file in my system. I cant see any rfcsdk folder in my system. Please help.
    any other solutions ,please suggest.
    sastry.
    Edited by: prssastry on Oct 15, 2008 7:13 AM

    Hi,
    In general practice we don't access a file from presentation server in background because at that point of time i might not logon to SAP server, so it is always preferable to access the file from Application layer incase of background processing.
    Unless it is a client requirement, don't access files from the presentation layer in background./
    thanks,
    Mahesh.

  • Problem in accessing application server file using open dataset

    Hi All,
    I am trying to access application server file using open dataset command, its working fine for normal path which imention. But when i am giving path of XI server file, its not working. How to access XI server file using open dataset. Please let me know.
    Thanks in advance.
    Regards,
    Vishal

    Hi Vishal,
    You need to verify if the location where you are trying to save the file is in the same server of SAP. In case that the location is in other server you need to map that directy into the same server of SAP.
    You need to point always to a location in the same server of SAP, in order that the open dataset could work.
    Regards,
    Eric

  • Where is Support for Windows Update issues for Windows Server?

    Where is Support for Windows Update Issues for Windows Server?
    Windows Update keeps prompting to install an important update, KB2871690 and continually fails with error code 0x800f922
    I ran all the fixes I can find, it still fails.
    I also tried the manual install, fails.
    Microsoft used to provide no charge support for Windows Update issues. They additionally offer online fixes  for other versions of windows, but not server, and I can't find a forum.
    I also cannot ignore the update, it continually prompts.
    I ran the windowsupdate.diagcab and it continually states it fixes Windows Update error 0x80070057, by resetting windows update data store. It further states it fixes Problems installing recent updates.
    But it doesn't. I've run it 50 times, and it says the same thing every time.
    So there is no support for windows update, and no support for windowsupdate.diagcab.
    What's the deal?

    I've done the SFC/ SCANNOW and DISM
    here is the cbs.log
    What are we looking for?
    2013-12-04 19:48:19, Info                  DISM   PID=1612 TID=1616 Scratch directory set to 'X:\$WINDOWS.~BT\Windows\TEMP\'. - CDISMManager::put_ScratchDir
    2013-12-04 19:48:19, Info                  DISM   PID=1612 TID=1616 DismCore.dll version: 6.2.9200.16384 - CDISMManager::FinalConstruct
    2013-12-04 19:48:19, Info                  DISM   PID=1612 TID=1616 Scratch directory set to 'X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360'. -
    CDISMManager::put_ScratchDir
    2013-12-04 19:48:19, Info                  DISM   PID=1612 TID=1616 Successfully loaded the ImageSession at "X:\$Windows.~BT\sources" - CDISMManager::LoadLocalImageSession
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Failed to get and initialize the PE Provider.  Continuing by assuming
    that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Manager: PID=1612 TID=1616 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE:
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE: <----- Starting Dism.exe session ----->
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE:
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE: Host machine information: OS Version=6.2.9200, Running architecture=amd64, Number of processors=4
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE: Dism.exe version: 6.2.9200.16384
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE: Executing command line: X:\$Windows.~BT\sources\dism.exe  /logpath:X:\$Windows.~BT\sources\Panther\cbs.log
    /scratchdir:X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360 /image:X:\ /is-serviceable
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Loading Provider from location X:\$Windows.~BT\sources\FolderProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Connecting to the provider located at X:\$Windows.~BT\sources\FolderProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Loading Provider from location X:\$Windows.~BT\sources\WimProvider.dll -
    CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Warning               DISM   DISM Provider Store: PID=1612 TID=1616 Failed to Load the provider: X:\$Windows.~BT\sources\WimProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Loading Provider from location X:\$Windows.~BT\sources\VHDProvider.dll -
    CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Warning               DISM   DISM Provider Store: PID=1612 TID=1616 Failed to Load the provider: X:\$Windows.~BT\sources\VHDProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Loading Provider from location X:\$Windows.~BT\sources\ImagingProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Warning               DISM   DISM Provider Store: PID=1612 TID=1616 Failed to Load the provider: X:\$Windows.~BT\sources\ImagingProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Loading Provider from location X:\$Windows.~BT\sources\CompatProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Connecting to the provider located at X:\$Windows.~BT\sources\CompatProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: FolderManager
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
    2013-12-04 19:48:20, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: Compatibility Manager.
    2013-12-04 19:48:20, Warning               DISM   DISM.EXE: Failed to load WimManager. Try running from the Deployment Tools Command Prompt. If the issue persists, ensure that wimgapi.dll
    and wimserv.exe are up to date.
    2013-12-04 19:48:20, Warning               DISM   DISM.EXE: Failed to add any commands.
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
    2013-12-04 19:48:20, Info                  DISM   DISM Manager: PID=1612 TID=1616 physical location path: X:\ - CDISMManager::CreateImageSession
    2013-12-04 19:48:20, Info                  DISM   DISM Manager: PID=1612 TID=1616 Copying DISM from "X:\Windows\System32\Dism" - CDISMManager::CreateImageSessionFromLocation
    2013-12-04 19:48:20, Info                  DISM   DISM Manager: PID=1612 TID=1616 Successfully loaded the ImageSession at "X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD"
    - CDISMManager::LoadRemoteImageSession
    2013-12-04 19:48:20, Info                  DISM   DISM Image Session: PID=1644 TID=1656 Instantiating the Provider Store. - CDISMImageSession::get_ProviderStore
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Initializing a provider store for the IMAGE session type. - CDISMProviderStore::Final_OnConnect
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\OSProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:20, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\OSProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:20, Info                  DISM   DISM OS Provider: PID=1644 TID=1656 Defaulting SystemPath to X:\ - CDISMOSServiceManager::Final_OnConnect
    2013-12-04 19:48:20, Info                  DISM   DISM OS Provider: PID=1644 TID=1656 Defaulting Windows folder to X:\Windows - CDISMOSServiceManager::Final_OnConnect
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Attempting to initialize the logger from the Image Session. - CDISMProviderStore::Final_OnConnect
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\LogProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\LogProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\PEProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Warning               DISM   DISM Provider Store: PID=1644 TID=1656 Failed to Load the provider: X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\PEProvider.dll.
    - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Failed to get and initialize the PE Provider.  Continuing by assuming
    that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Manager: PID=1612 TID=1616 Image session successfully loaded from the temporary location: X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD
    - CDISMManager::CreateImageSession
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Getting Provider OSServices - CDISMProviderStore::GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM OS Provider: PID=1644 TID=1656 Setting SystemPath to X:\ - CDISMOSServiceManager::SetSystemPath
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Target image information: OS Version=6.2.9200.16384, Image architecture=amd64
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Getting the collection of providers from an image provider store type. -
    CDISMProviderStore::GetProviderCollection
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\CbsProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\CbsProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Package Manager: PID=1644 TID=1656 Finished initializing the CbsConUI Handler. - CCbsConUIHandler::Initialize
    2013-12-04 19:48:22, Info                  DISM   DISM Package Manager: PID=1644 TID=1656 Loaded servicing stack for offline use only. - CDISMPackageManager::RefreshInstanceAndLock
    2013-12-04 19:48:22, Info                  DISM   DISM Package Manager: PID=1644 TID=1656 Loaded servicing stack for offline use only. - CDISMPackageManager::RefreshInstanceAndLock
    2013-12-04 19:48:22, Info                  DISM   DISM Package Manager: PID=1644 TID=1656 Loaded servicing stack for online use only. - CDISMPackageManager::RefreshInstanceAndLock
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\MsiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\MsiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\IntlProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\IntlProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\IBSProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Warning               DISM   DISM Provider Store: PID=1644 TID=1656 Failed to Load the provider: X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\IBSProvider.dll.
    - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\DmiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\DmiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM OS Provider: PID=1644 TID=1656 Get the registry path to the SOFTWARE hive located at X:\Windows\system32\config\SOFTWARE
    and determine if it is loaded. - CDISMOSServiceManager::DetermineBootDrive
    2013-12-04 19:48:22, Info                  DISM   DISM Driver Manager: PID=1644 TID=1656 Further logs for driver related operations can be found in the target operating
    system at %WINDIR%\inf\setupapi.offline.log - CDriverManager::Initialize
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\UnattendProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\UnattendProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\Wow64provider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Warning               DISM   DISM Provider Store: PID=1644 TID=1656 Failed to get the IDismObject Interface - CDISMProviderStore::Internal_LoadProvider(hr:0x80004002)
    2013-12-04 19:48:22, Warning               DISM   DISM Provider Store: PID=1644 TID=1656 Failed to Load the provider: X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\Wow64provider.dll.
    - CDISMProviderStore::Internal_GetProvider(hr:0x80004002)
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\SmiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\SmiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\EmbeddedProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Warning               DISM   DISM Provider Store: PID=1644 TID=1656 Failed to Load the provider: X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\EmbeddedProvider.dll.
    - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\AppxProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\AppxProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\AssocProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\AssocProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered.  Attempting to initialize
    the provider. - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\TransmogProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\TransmogProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Transmog Provider: PID=1644 TID=1656 Current image session is [OFFLINE] - CTransmogManager::GetMode
    2013-12-04 19:48:22, Info                  DISM   DISM Transmog Provider: PID=1644 TID=1656 Determined WinDir path = [X:\Windows] - CTransmogManager::GetWinDirPath
    2013-12-04 19:48:22, Info                  DISM   DISM Transmog Provider: PID=1644 TID=1656 GetProductType: ProductType = [ServerNT] - CTransmogManager::GetProductType
    2013-12-04 19:48:22, Info                  DISM   DISM Transmog Provider: PID=1644 TID=1656 Product Type: [ServerNT] - CTransmogManager::Initialize
    2013-12-04 19:48:22, Info                  DISM   DISM Transmog Provider: PID=1644 TID=1656 Product Type ServerNT : [Yes] - CTransmogManager::Initialize
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: OSServices
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Package Manager
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Package Manager.
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: MsiManager
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: MsiManager.
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: IntlManager
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: IntlManager.
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DriverManager
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DriverManager.
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Unattend Manager
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Unattend Manager.
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: SmiManager
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: AppxManager
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: AppxManager.
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: AssocManager
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: AssocManager.
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Edition Manager
    2013-12-04 19:48:22, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: Edition Manager.
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2013-12-04 19:48:22, Info                  DISM   DISM Package Manager: PID=1644 TID=1672 Processing the top level command token(is-serviceable). - CPackageManagerCLIHandler::Private_ValidateCmdLine
    2013-12-04 19:48:22, Info                  DISM   DISM Package Manager: PID=1644 TID=1672 Attempting to route to appropriate command handler. - CPackageManagerCLIHandler::ExecuteCmdLine
    2013-12-04 19:48:22, Info                  DISM   DISM Package Manager: PID=1644 TID=1672 Routing the command... - CPackageManagerCLIHandler::ExecuteCmdLine
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Found the OSServices.  Waiting to finalize it until all other providers
    are unloaded. - CDISMProviderStore::Final_OnDisconnect
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Found the OSServices.  Waiting to finalize it until all other providers
    are unloaded. - CDISMProviderStore::Final_OnDisconnect
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Found the PE Provider.  Waiting to finalize it until all other providers
    are unloaded. - CDISMProviderStore::Final_OnDisconnect
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(DISM Package Manager) - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Package Manager: PID=1644 TID=1672 Finalizing CBS core. - CDISMPackageManager::Finalize
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: DISM Package Manager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(MsiManager) - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: MsiManager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(IntlManager) - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: IntlManager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(DriverManager) - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: DriverManager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(DISM Unattend Manager) - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: DISM Unattend Manager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(SmiManager) - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: SmiManager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(AppxManager) - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: AppxManager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(AssocManager) - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: AssocManager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(Edition Manager) - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: Edition Manager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Releasing the local reference to OSServices. - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:23, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: OSServices - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:24, Info                  DISM   DISM OS Provider: PID=1644 TID=1672 Successfully unloaded all registry hives. - CDISMOSServiceManager::Final_OnDisconnect
    2013-12-04 19:48:24, Info                  DISM   DISM Provider Store: PID=1644 TID=1672 Releasing the local reference to DISMLogger.  Stop logging. - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:24, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
    2013-12-04 19:48:24, Info                  DISM   DISM.EXE:
    2013-12-04 19:48:24, Info                  DISM   DISM.EXE: <----- Ending Dism.exe session ----->
    2013-12-04 19:48:24, Info                  DISM   DISM.EXE:
    2013-12-04 19:48:24, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Found the OSServices.  Waiting to finalize it until all other providers
    are unloaded. - CDISMProviderStore::Final_OnDisconnect
    2013-12-04 19:48:24, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:24, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Disconnecting Provider: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
    2013-12-04 19:48:24, Info                  DISM   DISM Provider Store: PID=1612 TID=1616 Releasing the local reference to DISMLogger.  Stop logging. - CDISMProviderStore::Internal_DisconnectProvider

  • Windows 8.1 RDP Issues with Windows Server 2008 Standard.

    I have an issue maintaining an RDP connection from 64-bit windows 8.1 (standard and pro) to 32-bit Windows Server 2008 Standard.  Initial connection is normal, and as long as I am constantly typing on the link, for the most part it stays up. However
    if I do not keep typing, or go to another desktop program for a few minutes, and then go back, the following happens:
    If I am typing into notepad (or some screen that does not require windows to be refreshed) I can continue to do so, so the connection has not been lost, however if I try to do something that requires more extensive exchange of information (like file
    - open, or even trying to pull up the start menu), the connection pauses with about half the screen refreshed, sometimes after about 30 seconds a bit more of the screen fills out, but otherwise the connection is not responsive. Then after about 2 minutes,
    RDP reconnects, at which point I am back to "normal".  I have conducted some tests and made inquiries of others attempting to connect to the server.
    1) I can connect to other Windows (servers 2008 R2 and 2012)  with no connection issues from this PC
    2) I can connect to the 32-bit server with no issues using Windows Vista Ultimate and Windows 7 from the same location as the WIndows 8.1 PC
    3) When I do a network speed test while having these issues I see full download and upload speeds, so I am not experiencing intermittent internet issues.
    4) No-one else from other locations (not of course using Windows 8.1) has any issues using RDP to the 32-bit Windows Server Standard.
    These various tests seem to eliminate my network connection, and other operating systems, from the equation, and point to RDP issues on windows 8.1 connecting to the older OS.  I noticed in the September updates, a case 2989039 which seemed to point
    to similar issues when using UDP through Remote Desktop Gateway.  That update is on my machine, and my connection has the setting Automatically detect RD Access Gateway server settings.
    Any thoughts anyone?

    Hi  RonaldRenaud,
    If my understanding is right, this RDP issue only occur in the connection between Windows 8.1 and Server 2008.
    Please check if you have installed the update kb2984006.
    To resolve this issue caused by update 2989039, install update rollup 2984006. For more information, please refer to the following KB.
    http://support2.microsoft.com/kb/2989039/en-us
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • System Cache Issues with Windows Server 2008R2

    Hi,
    I'm trying to deploy Java version 1.5.0 (build 1.5.0_14-b03) on a new Windows Server 2008R2 installation. I want to use the system cache feature and have used it successfully on Windows XP workstations and Windows 2003 servers in the past. I even got it to work on a test Win Server 2008R2 server earlier this week. But on my production machine I can't get the system cache to configure.
    I installed Java as usual and it installed into the Program Files(x86) directory. I copied my deployment files to the c:\windows\sun\java\deployment directory.
    Deployment.config contains:
    deployment.system.config=file\:/c\:/windows/sun/java/deployment/deployment.properties
    Deployment.properties contains:
    deployment.user.cachedir=C\:\\Program Files\\HCN
    deployment.user.cachedir.locked
    deployment.system.cachedir=C\:\\Program Files\\HCN
    deployment.javaws.shortcut="NEVER"
    deployment.javaws.autodownload="NEVER"
    Not sure what's missing here especially since it worked fine the other day.
    Both of these servers are virtual, VMware ESX 3.5 and were created from the same template. Only real difference is the production system will be a XenApp application server so it has XenApp installed.
    Error I'm getting is that in Javaws it reports that the system cache is not configured and every time I launch my application it has to download from the source because we are deleting the local profiles when the user logs out.
    Any suggestions?
    Thanks in advance,
    Linn

    >    I just wanted to know whether there will be any sort of communication or support issues between PROD and DEVE systems with such diverse configurations.
    No.
    You could even use HP-UX on the DEV system - as long as you're able to share a common directory to ensure transporting it's not a problem. Transports are OS and DB independent.
    However, memory management and security in Windows 2008 changed significantly, you may have to use different configurations for W2K8 vs. W2K3.
    Markus

  • BO XI 3.1 SP3 Install issue on Windows Server 2008 R2 64-bit

    We are trying to install the lastest Build of Business Objects XI 3.1 SP3 on a new server with Windows Server 2008 R2 64-bit OS (51038908_part1.exe,51038908_part2.rar, 51038908_part3.rar).
    The setup never finish! It seems that the setup can't validate the CMS installation and is trying again and again.
    In the "Enterprise XI 3.1 SP3 - Windows - Supported Platforms" document, the Windows Server 2008 R2 Entreprise 64-bit Edition is supported.
    The antivirus is desactivated and the setup.exe file was launched in the administrator mode.
    Any ideas?
    Edited by: Frederic Wojnarowski on Nov 22, 2010 5:45 PM

    We have run into similar issues with that same package (51038908_part1.exe) which is a complete install of "BOE-3.1 package with SP3" for Windows 2008 Server that only installs in the 64-bit mode.
    We had a 32-bit Oracle 10g client installed, that BOE did not recognize for the CMS - so the install was hanging at the CMS config...(no clear errors / no simple way to roll-back the failed install).
    We only discovered the underlying Oracle issue when we deployed just the CMS with a local MySQL database - and then tried to point the CMS at the Oracle DB instead. It gave us TNS errors even though we could hit the same TNS without issue using SQL-PLUS on the same machine.
    This lead us to assume that the 64-bit BOE couldn't connect via the 32-bit Oracle 10g drivers.
    We have had trouble installing the 64-bit Oracle 10g client that we downloaded - so are now looking for some advice.
    Anyone know which specific 64-bit Oracle 10g client should be used with the cumulative "BOE-3.1 package with SP3" 64-bit package (51038908_part1.exe)...?
    I assume that this Oracle client will be used for any connection to the CMS / AUDIT Oracle databases - and any RPT content running on the CR-JobServers that is using an Oracle Native connection...?
    Thanks in advance for the advice.

  • Sybase ODBC Connection Issue in Windows Server 2008 R2

    Hi ,
    We have three sybase odbc connection in Windows Server 2008 R2 server . One connection is not working now, it was working fine before 30 days.
    I can ping the server address successfully from BO Server through "dsedit".
    i have created the same connection in a diffrent server (Win server 2003),and it is working fine.
    Sybase ASE Driver version 3.50.00.10
    Please help me to overcome this issue.
    Thanks,
    Saurabh upadhyay

    Hi Saurabh,
    The error message you are reporting is telling us that you are using the very old ctlibrary ODBC Driver.
    That is pretty much the only way you can get that error.
    Run from a command prompt,  isql -v  that will return a version string.  We can then verify the version.
    However, the old ODBC driver will function with the newer client.
    The old driver would read the sql.ini for the network address, and was also a translation layer between
    the client application and the ASE.
    Both were eliminated when Sybase released the "Native" ODBC Driver.
    The ct_connect error states that the connection attempt is using ctlibrary.
    In your ODBC configuration, Check to see in the ODBC Administrator and check to make
    sure that the driver you are using for your DSN is the Adaptive Server Enterprise and not the
    Sybase ASE ODBC Driver.
    Also  check the Drivers tab in the ODBC Admin.  See what the actual file is listed for the driver.
    sysybnt.dll
    syodase.dll  are unsupported drivers.
    It would be to your advantage to open an incident with SAP for more complete support
    Thank you,
    Kevin

  • Weird issue with Windows Server 2008 R2 Print Server

    I have an issue with Windows 2008 R2 (VMWare Hosted) running Windows Print Server. 
    Prior to a small network change, the print server was working well, hosting about 80 different networked printers from various vendors. 
    We made a change (that we ended up rolling back) to the Client's DHCP Scope OPT 006 (DNS Servers). The DNS servers never quite worked right and broke AD authentication to different servers, and was just a mess.
    After rolling back we are not able to keep the printers online. If we ping them from the print server, the printer(s) never wake up, when a print job is submitted. If we ping them from one of the access switches, they work fine (until they fall back asleep),
    to prevent this, if we start a ping on the server AFTER waking them up from the Switch Ping, they stay online and no problems. 
    If we stop the ping, they fall back asleep at some point, and again, won't wake up without intervention/switch side ping. 
    Has anyone experienced anything like this? Any tips on how I could possibly resolve it? 
    Thanks in advance.

    Hi,
    According to your description, the issue seems to be that the printers can't keep online. Sounds like a power managerment issue. Why these printers fall into sleep? Have you consulted this issue with the manufacturer of these printers? Do these printers
    fall into sleep if them lose the contact with printer server? Have you tried to reset the printers?
    >>We made a change (that we ended up rolling back) to the Client's DHCP Scope OPT 006 (DNS Servers).
    DNS client will cache the recently queried records. If the DNS server has replied with a wrong records, communication issues will occur. To clear the DNS cache on a Windows device, please run the command below:
    ipconfig /flushdns
    Best Regards.
    Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Issues with Windows Server 2008

    Hi,
       I am facing a issue with my PROD and DEVE systems. Initially I installed ECC6 SR3 on PROD with Windows Server 2008 and only ABAP stack as JAVA stack is not fully supported. Now I am planning to install DEVE server with Windows 2003 in which I will have both ABAP and JAVA stacks.
       I just wanted to know whether there will be any sort of communication or support issues between PROD and DEVE systems with such diverse configurations.
       Awaiting replies.

    >    I just wanted to know whether there will be any sort of communication or support issues between PROD and DEVE systems with such diverse configurations.
    No.
    You could even use HP-UX on the DEV system - as long as you're able to share a common directory to ensure transporting it's not a problem. Transports are OS and DB independent.
    However, memory management and security in Windows 2008 changed significantly, you may have to use different configurations for W2K8 vs. W2K3.
    Markus

Maybe you are looking for